Hydraulic Technician jobs - Jeddah Saudi

<h3>About the Role</h3><p>Fakeeh Care Group is seeking a <strong>Neurophysiology Technician</strong> to join their team in Jeddah, Makkah, Saudi Arabia. This full-time position involves performing a range of neurophysiology procedures to support neurological diagnostics and patient care.</p><h3>Key Responsibilities</h3><ul><li>Perform short routine EEG recordings and long-term video EEG monitoring.</li><li>Conduct bedside EEG recordings as required.</li><li>Execute Nerve Conduction Tests.</li><li>Perform evoked potential testing, including visual and somatosensory.</li><li>Assist Neurology Doctors with advanced EMG, NCV, and VEP procedures.</li><li>Type and complete reports for each patient.</li><li>Arrange appointments for PSG, PAP Titration, EEG, EMG-NCV, and VEP.</li><li>Perform routine equipment care, maintenance, and inventory evaluation in collaboration with a biomedical engineer.</li><li>Report any safety or operational concerns to the chairperson of Neurosciences.</li><li>Educate patients and their families on health conditions, treatments, and preventative measures when applicable.</li><li>Ensure all procedures are performed in a timely and professional manner.</li></ul><h3>Qualifications and Experience</h3><ul><li>Completion of neurophysiology procedures training in a hospital setting or pre-employment training session from an accredited facility.</li><li>A minimum of 3 years of experience as a Neurophysiology Technician or EEG/NCV/EP technician with documented proficiency in all required competencies.</li><li>For a Senior Neurophysiology Technician role, a minimum of 5 years of experience as a Neurophysiology Technician or EEG/NCV/EP technician with documented proficiency in all required competencies is necessary.</li></ul><h3>Required Skills</h3><ul><li>Proficiency in Microsoft Word is mandatory.</li><li>Typing skills of 20 words per minute or higher.</li></ul><h3>Work Environment</h3><p>This is a full-time position based in Jeddah, Makkah, Saudi Arabia, within a healthcare setting focused on neurosciences.</p><h3>Application Process</h3><p>Candidates who meet the specified requirements are encouraged to apply for this role.</p>

After Sales<br><br>Job Purpose<br><br>To design, deliver, and evaluate technical training programs for CEER Motors’ dealer and service network, ensuring technicians are fully competent in the diagnosis, repair, and maintenance of CEER electric vehicles. The role supports network readiness, high-voltage safety compliance, and consistent technical capability across all CEER service centres.<br><br>Key Functional Responsibilities<br><br>Prepare, conduct, and evaluate technical training programs relating to CEER EV systems, high‑voltage safety, diagnostics, and repair procedures. Deliver instructor-led, hands-on, and digital training sessions across technical training workshops, EV labs, service centres, and classrooms. Develop and update training curricula, technical content, training manuals, presentations, and assessments in line with CEER standards. Conduct written and practical assessments to measure technician competency and readiness. Maintain training materials, ensuring accuracy, consistency, and alignment with product updates and engineering releases. Support the preparation of the annual and quarterly training plan to meet departmental and network requirements. Track trainee performance, attendance, and certification status; maintain accurate training records. Provide feedback on technician skill gaps and recommend training interventions to the After-Sales Training Manager. Support new model introductions by developing and delivering product launch technical content. Ensure all training activities comply with EV and high-voltage safety protocols. Assist in piloting and validating new training tools, equipment, and teaching methodologies.<br><br>Key Managerial Accountabilities<br><br>Contribute to achieving departmental objectives by delivering accurate, high-quality training and meeting assigned targets. Support the implementation of policies, procedures, and controls covering all assigned training activities. Identify opportunities for continuous improvement in training processes, materials, tools, and trainee performance. Ensure accuracy and timeliness of all reports, submissions, assessments, and documentation within the training function. Maintain the confidentiality of CEER internal information, training data, and proprietary technical content. Ensure adherence to Health, Safety, Security, and Environment (HSSE) standards, especially EV and high‑voltage safety practices. <br><br>Job Requirement<br><br>Education : Bachelor’s degree in Electrical, Mechanical, Electro‑Mechanical, or Automotive Engineering. EV/High‑Voltage Certification preferred. <br><br>Experience: Minimum 3–5 years of automotive technical experience, including diagnostics and repair. Prior experience in technical training is preferred.

‏⁦مطلوب شريك مستثمر ????أبحث عن شريك استثماري استراتيجي للمشاركة في مشروع تقني قائم، تم تطويره وتجهيزه، ويستعد للانتقال إلى مرحلة الإطلاق والتوسع.منصة الرئيس التنفيذي هي منصة رقمية متخصصة في عالم الأعمال، تهدف إلى بناء منظومة تربط أصحاب الأعمال والقيادات التنفيذية والفرص والخدمات في بيئة رقمية واحدة.المشروع قائم من حيث الفكرة والتطوير والبنية الأساسية، ويحتاج إلى تمويل لاستكمال متطلبات الإطلاق والتوسع في السوق.أبحث عن شريك لا يقدم التمويل فقط، بل يمكنه أن يضيف قيمة حقيقية من خلال الخبرة والعلاقات والقدرة على دعم النمو.من لديه اهتمام جاد بالاستثمار في مشروع تقني قابل للتوسع، يمكنه التواصل معي على الخاص، وسيتم تزويده بالتفاصيل الكاملة بعد التعارف الأولي.الفرص الكبيرة تبدأ بشريك يرى المستقبل قبل أن يراه الجميع.

<h3>About Abdul Latif Jameel</h3><p>Abdul Latif Jameel is a diversified business with a significant presence across the Middle East, North Africa, and Turkey (MENAT) region. With 75 years of experience, the company has evolved from a trading business and Toyota distributorship in Jeddah, Saudi Arabia, to an extensive operational infrastructure. It has built the largest vehicle distribution network in Saudi Arabia and developed comprehensive automotive expertise, which has enabled diversification into new sectors supporting the 'infrastructure of life' in the MENAT region.</p><h3>Job Summary</h3><p>The Job Controller is responsible for the close supervision of daily service operations, with authority over distributing jobs to technicians based on required repairs and full control over the system. This full-time role, based in Makkah and Jeddah, ensures that job control functions within the service center achieve targets in customer satisfaction and retention by adhering to company standards and operating procedures. The position requires 2-5 years of experience.</p><h3>Key Responsibilities</h3><ul><li>Develop Job Cards based on required services within specified timelines.</li><li>Report job progress and conduct post-service follow-ups for complaints.</li><li>Ensure accuracy in system control and determine performance productivity and worker-hour sales.</li><li>Assist in controlling desired jobs based on customer requests, coordinating with Service Advisors on workshop loading to meet delivery times, quality standards, and estimated costs.</li><li>Assign repairs based on technician skill in consultation with the Chief Technician to prevent unattended vehicles in working stalls and optimize worker-hour usage.</li><li>Communicate with Service Advisors regarding repair progress or additional jobs identified by the Chief Technician, obtaining approval for necessary parts.</li><li>Ensure high customer satisfaction by promoting a Guest-Centric and “Fix-It-Right” approach within the service team, coordinating with other departments.</li><li>Inform the Chief Technician of finished jobs for final quality control and vehicle release arrangements.</li><li>Assist in post-service follow-up for customer complaints and report issues to service team leaders for resolution.</li><li>Confirm that requested repairs are carried out by assigned technicians to accurately charge labor and material costs.</li><li>Ensure data reliability in the system by confirming accomplished job cards with Chief Technicians and Technicians for accurate report generation.</li><li>Coordinate with Service Advisors and Chief Technicians to enter correct data, record repairs, and update vehicle delivery status for productivity analyses.</li><li>Monitor process card progress in the workshop with the Chief Technician, recording repairs, time on/off, and standard times to determine performance productivity.</li></ul><h3>Impact of the Role</h3><ul><li>Directly influences repair delivery time and quality.</li><li>Directly impacts guest satisfaction and contributes to the center's NPS score.</li><li>Indirectly affects after-sales quality activities.</li><li>Directly ensures job assignment to the appropriate technician based on service requirements.</li><li>Directly impacts the accuracy of system data and reports.</li><li>Directly supports the resolution of guest complaints.</li><li>Contributes to achieving the organization's sales targets.</li></ul><h3>Why Work With Us</h3><p>Abdul Latif Jameel offers a global footprint and a history of commercial success spanning over three-quarters of a century. The company provides opportunities worldwide, guided by values of Respect, Innovation, a Pioneering Spirit, and Empowerment. This culture fosters an environment where ideas and people can thrive.</p>

<h3>About the Role</h3><p>Magrabi Health is seeking a <strong>Safety Technician</strong> to join their team in Jeddah, Makkah, Saudi Arabia. This full-time role involves supporting health, safety, fire prevention, and environmental safety programs across assigned hospitals and centers. The Safety Technician will contribute to maintaining a secure environment for patients, employees, visitors, contractors, and assets.</p><h3>Role Overview</h3><p>The Safety Technician is responsible for implementing and monitoring safety protocols. This includes conducting inspections, ensuring compliance with safety standards, and assisting in incident investigations and emergency preparedness. The role is crucial in upholding a safe operational environment within healthcare facilities.</p><h3>Key Responsibilities</h3><ul><li>Conduct routine safety inspections across clinical and non-clinical areas.</li><li>Identify hazards and unsafe practices, and ensure corrective actions are followed through to closure.</li><li>Inspect fire safety equipment, emergency exits, fire doors, and evacuation routes.</li><li>Support fire drills, emergency preparedness, and evacuation activities.</li><li>Monitor Personal Protective Equipment (PPE) compliance and safe working practices.</li><li>Support hazard identification, risk assessments, and incident investigations.</li><li>Monitor contractor compliance with safety requirements.</li><li>Inspect hazardous material storage and support chemical and waste safety practices.</li><li>Maintain comprehensive records for safety, incidents, inspections, training, and compliance.</li><li>Support employee safety orientation, awareness campaigns, and training initiatives.</li><li>Ensure readiness for regulatory and accreditation inspections.</li></ul><h3>Experience and Qualifications</h3><p>Candidates for the Safety Technician position should possess <strong>2-5 years of relevant experience</strong> in safety roles, preferably within a healthcare or similar environment. The role requires a strong understanding of health, safety, and environmental regulations.</p><h3>Work Environment</h3><p>This is a full-time position based in Jeddah, Makkah, Saudi Arabia, within the Magrabi Health network of hospitals and centers. The role involves working across various clinical and non-clinical areas to ensure safety standards are met.</p><h3>Application Information</h3><p>Salary for this position will be disclosed during the interview process. Interested candidates are encouraged to apply.</p>

Carrying out more demanding service technician assignments worldwide on site. Coordinate a team of field service engineers and technicians and provides a superior level of technical service in servicing, repairs, overhauls and inspection on complex equipment and auxiliary problems in the workshop, in the field, onshore, and offshore.<br><br>About Everllence<br><br>Everllence, formerly known as MAN Energy Solutions, is a leading provider of propulsion, decarbonization and efficiency solutions for shipping, the energy economy and industry. True to our motto – ‘Moving big things to zero’ – we help key industries in the global economy to reduce hard-to-abate emissions. Our technologies have a measurable impact on the success of the global energy transition. Headquartered in Germany, Everllence employs around 15,000 people across more than 140 sites worldwide.<br><br>We Can Offer You The Following Tasks<br><br>Perform maintenance, repairs, major overhauls, and servicing of machines, engines, turbochargers, and related systems in line with approved work cards and procedures. Prepare SOPs and ensure high-quality service delivery; plan timelines, monitor project progress, quality, and lead times. Ensure full compliance with HSE standards, including LMRA execution and proper use of PPE. Plan and prepare service activities, including manpower, tools, spare parts, materials, and work schedules. Read and interpret technical drawings, manuals, and reports to ensure accurate execution of work. Supervise, coach, and technically support service technicians, engineers, and external personnel during on-site activities. Support customers with technical expertise, commissioning activities, preventive maintenance advice, and coordination of assembly/disassembly work. Diagnose equipment issues, handle warranty cases, and recommend corrective and preventive actions in coordination with HQ. Prepare daily and final service reports, analyze maintenance data, and propose technical improvements. Coordinate with internal departments, travel to job sites as required, and support smooth service execution.<br><br>Essential<br><br>You can help us with these qualifications:<br><br>Bachelor’s degree in Mechanical Engineering or equivalent.8+ years of relevant experience, preferably in heavy equipment, marine industry, or power plants. Strong understanding of business at both technical and commercial levels. Knowledge of work preparation, project management, and leadership. Familiarity with HSE, environmental, quality, and safety requirements. Willingness to travel worldwide. Ability to prepare technical reports using Microsoft Office.<br><br>Desirable<br><br>Knowledge of engine systems, accessories, and auxiliaries (e.g. separators, coolers, filters). Experience with third-party SLAs. Management training. Familiarity with process measuring technology.<br><br>Contact us<br><br>That Is Important To That Is Important To Us<br><br> Integrity and compliance are essential elements of our corporate culture. We firmly support diversity and equal opportunities and are therefore looking forward to receiving a diverse range of applications.

Carrying out more demanding service technician assignments worldwide on site. Coordinate a team of field service engineers and technicians and provides a superior level of technical service in servicing, repairs, overhauls and inspection on complex equipment and auxiliary problems in the workshop, in the field, onshore, and offshore.<br><br>About Everllence<br><br>Everllence, formerly known as MAN Energy Solutions, is a leading provider of propulsion, decarbonization and efficiency solutions for shipping, the energy economy and industry. True to our motto – ‘Moving big things to zero’ – we help key industries in the global economy to reduce hard-to-abate emissions. Our technologies have a measurable impact on the success of the global energy transition. Headquartered in Germany, Everllence employs around 15,000 people across more than 140 sites worldwide.<br><br>We Can Offer You The Following Tasks<br><br>Perform maintenance, repairs, major overhauls, and servicing of machines, engines, turbochargers, and related systems in line with approved work cards and procedures. Prepare SOPs and ensure high-quality service delivery; plan timelines, monitor project progress, quality, and lead times. Ensure full compliance with HSE standards, including LMRA execution and proper use of PPE. Plan and prepare service activities, including manpower, tools, spare parts, materials, and work schedules. Read and interpret technical drawings, manuals, and reports to ensure accurate execution of work. Supervise, coach, and technically support service technicians, engineers, and external personnel during on-site activities. Support customers with technical expertise, commissioning activities, preventive maintenance advice, and coordination of assembly/disassembly work. Diagnose equipment issues, handle warranty cases, and recommend corrective and preventive actions in coordination with HQ. Prepare daily and final service reports, analyze maintenance data, and propose technical improvements. Coordinate with internal departments, travel to job sites as required, and support smooth service execution.<br><br>Essential<br><br>You can help us with these qualifications:<br><br>Bachelor’s degree in Mechanical Engineering or equivalent.8+ years of relevant experience, preferably in heavy equipment, marine industry, or power plants. Strong understanding of business at both technical and commercial levels. Knowledge of work preparation, project management, and leadership. Familiarity with HSE, environmental, quality, and safety requirements. Willingness to travel worldwide. Ability to prepare technical reports using Microsoft Office.<br><br>Desirable<br><br>Knowledge of engine systems, accessories, and auxiliaries (e.g. separators, coolers, filters). Experience with third-party SLAs. Management training. Familiarity with process measuring technology.<br><br>Contact us<br><br>That Is Important To That Is Important To Us<br><br> Integrity and compliance are essential elements of our corporate culture. We firmly support diversity and equal opportunities and are therefore looking forward to receiving a diverse range of applications.

<h3>About the Role</h3><p>Basamh Industrial Co. Ltd. is seeking an <strong>Electrical Technician</strong> to join its team in Jeddah. This full-time role is essential for maintaining optimal functionality of electrical systems, supporting the company's operations within the market research industry.</p><h3>Role Contribution</h3><p>The Electrical Technician will work alongside a team of professionals, contributing to the company's research processes through advanced technology and data analysis. This position offers opportunities for technical skill enhancement and knowledge expansion within a supportive work environment.</p><h3>Key Responsibilities</h3><ul><li>Perform routine maintenance and inspections of electrical systems to ensure optimal performance and compliance with safety standards, utilizing tools such as multimeters and oscilloscopes for diagnosis.</li><li>Install, troubleshoot, and repair electrical equipment and wiring, ensuring adherence to industry regulations and contributing to operational efficiency.</li><li>Collaborate with engineers and project managers to support electrical system designs, providing insights based on practical experience and technical knowledge.</li><li>Document all maintenance and repair work in detail, maintaining accurate records for future troubleshooting and compliance audits.</li><li>Assist in developing preventive maintenance schedules to minimize downtime and ensure the reliability of critical electrical systems.</li><li>Participate in training sessions to stay updated on the latest electrical technologies and safety practices.</li><li>Respond promptly to electrical emergencies, conducting assessments and implementing solutions to restore functionality.</li><li>Support the procurement process by evaluating and recommending electrical components and tools, ensuring the selection of high-quality materials.</li><li>Engage in continuous improvement initiatives by suggesting process enhancements and innovations for increased efficiency in electrical operations.</li></ul><h3>Qualifications and Experience</h3><ul><li>A minimum of <strong>10 years of experience</strong> in an electrical technician role.</li><li>Demonstrated ability to perform maintenance, installation, troubleshooting, and repair of electrical systems and equipment.</li><li>Proficiency in using diagnostic tools such as multimeters and oscilloscopes.</li><li>Knowledge of industry regulations and safety standards.</li></ul><h3>Work Environment</h3><p>The Electrical Technician will operate within a collaborative culture that values ideas and contributions. The company is committed to career growth, offering ongoing training and development programs.</p><h3>Application Process</h3><p>Candidates who meet the specified requirements are encouraged to apply for this full-time position in Jeddah.</p>

<h3>نبذة عن الدور</h3><p>تبحث شركة القسي العالمية للمقاولات عن <strong>فني أجهزة إلكترونية</strong> للانضمام إلى فريقها في جدة، مكة المكرمة. يركز هذا الدور بدوام كامل على تركيب ومراقبة الأجهزة والمعدات الإلكترونية، بالإضافة إلى تقديم الدعم لمهندسي الإلكترونيات في أنشطة البحث والتطوير. يتطلب الدور خبرة تتراوح بين سنتين وخمس سنوات في المجال.</p><h3>المهام والمسؤوليات الرئيسية</h3><ul><li>تركيب ومراقبة الأجهزة والمعدات الإلكترونية، بما في ذلك الدوائر وعناصر التحكم والآلات.</li><li>دراسة المخططات الفنية لتحديد نوع وكمية المواد والمعدات واليد العاملة المطلوبة.</li><li>توجيه وتنسيق جهود العمال والميكانيكيين وغيرهم من الحرفيين أثناء عمليات تركيب الأجهزة الإلكترونية.</li><li>اختبار الأجهزة الإلكترونية بعد التركيب لضمان مطابقتها للمخططات والمواصفات الفنية.</li><li>إجراء الفحوصات الروتينية للصيانة الوقائية وتشخيص التلفيات والأعطال المحتملة، واتخاذ الإجراءات التصحيحية اللازمة.</li><li>تقديم المساعدة التقنية لمهندسي الإلكترونيات في جهود البحث والتطوير المتعلقة بالأجهزة الإلكترونية.</li></ul><h3>المؤهلات والخبرات المطلوبة</h3><ul><li>خبرة عملية تتراوح بين <strong>سنتين وخمس سنوات</strong> في مجال فني الأجهزة الإلكترونية.</li><li>القدرة على قراءة وتفسير المخططات والرسومات الفنية.</li><li>معرفة قوية بمبادئ عمل الدوائر الإلكترونية وعناصر التحكم.</li><li>مهارات تشخيص الأعطال وإصلاحها.</li></ul><h3>بيئة العمل</h3><p>يعمل فني الأجهزة الإلكترونية ضمن فريق متخصص في شركة القسي العالمية للمقاولات بمدينة جدة، مكة المكرمة. الوظيفة بدوام كامل، وتتطلب الالتزام بمهام التركيب والصيانة والدعم الفني في بيئة عمل ديناميكية.</p><h3>معلومات إضافية</h3><p>الراتب الخاص بهذا الدور سيتم تحديده بناءً على الخبرة والمؤهلات بعد المقابلة. نشجع المرشحين المؤهلين على التقديم لهذه الفرصة المهنية.</p>

<h3><strong>About Sawaco</strong></h3><p>Sawaco is seeking a qualified A/C Technician to join its team in Jeddah. This full-time role involves the installation, maintenance, troubleshooting, and repair of various climate control systems across company facilities.</p><h3><strong>Role Overview</strong></h3><p>The A/C Technician is responsible for ensuring the optimal functioning of air conditioning, ventilation, and refrigeration systems. This includes both corrective and preventive maintenance tasks to minimize breakdowns and ensure system efficiency. The role requires adherence to safety procedures and company standards while coordinating with other maintenance personnel.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Install, maintain, and repair A/C, HVAC, ventilation, and refrigeration systems.</li><li>Diagnose equipment faults and perform necessary corrective maintenance.</li><li>Conduct regular servicing, including filter replacement, coil cleaning, and refrigerant checks.</li><li>Perform preventive maintenance to minimize system breakdowns and extend equipment life.</li><li>Safely operate HVAC tools and testing equipment.</li><li>Maintain accurate records of all maintenance and repair activities.</li><li>Follow established safety procedures and company operational standards.</li><li>Coordinate effectively with other maintenance technicians and electricians.</li><li>Respond promptly to urgent maintenance requests to address critical issues.</li></ul><h3><strong>Qualifications and Experience</strong></h3><ul><li>A minimum of 2 to 5 years of experience as an A/C Technician.</li><li>Demonstrated ability to install, maintain, and repair various A/C and refrigeration systems.</li><li>Proficiency in diagnosing and troubleshooting equipment faults.</li><li>Familiarity with preventive maintenance practices.</li></ul>

المسمى الوظيفي: أخصائي أسفلت / مهندس مواد ورصف (Asphalt Specialist) الموقع: الرياض، المملكة العربية السعوديةعن الوظيفة نبحث عن أخصائي أسفلت ذو كفاءة وخبرة فنية متقدمة للانضمام إلى فريق عملنا في إدارة وتنفيذ مشاريع البنية التحتية والطرق في مدينة الرياض.المسؤوليات والمهام الوظيفيةالإشراف الكامل على اختبارات وضبط جودة الخلطات الأسفلتية ومطابقتها للمواصفات الفنية المعتمدة.متابعة عمليات فرش ودك الأسفلت في الموقع والتأكد من تحقيق نسب الدمك ودرجات الحرارة المطلوبة.إعداد ومراجعة تصاميم الخلطات الأسفلتية (Mix Designs) وتقارير الجودة اليومية والدورية.التنسيق المباشر مع استشاري المشروع والجهات المختصة لاعتماد المواد والتجارب الحقلية والمعملية.متابعة أعمال كشط وإعادة سفلتة الطرق ومعالجة العيوب الإنشائية للرصف بكفاءة وسرعة.المؤهلات والشروط المطلوبةبكالوريوس في الهندسة المدنية أو ما يعادلها.خبرة لا تقل عن 7 سنوات مستمرة في شركة واحدة من شركات مقاولات الطرق المصنفة تصنيف أول.ميزة إضافية مفضلة: خبرة سابقة ومثبتة في مشاريع أمانة منطقة الرياض (خاصة مشاريع رفع الكفاءة وتحسين الطرق).إلمام تام بالمواصفات الفنية العامة لوزارة النقل وأمانة منطقة الرياض للأعمال الإنشائية والأسفلت.امتلاك مهارات تواصل وإدارة فرق عمل ممتازة، والقدرة على التواجد الميداني والمتابعة الدقيقة.طريقة التقديم

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة نابكو للصناعة عن <strong>مشغل آلة تعبئة</strong> للانضمام إلى فريقها في جدة، مكة المكرمة. يهدف هذا الدور بدوام كامل إلى تشغيل ومراقبة وصيانة آلات التعبئة المستخدمة في <em>تشكيل أو صب المنتجات المعدنية</em>، مع ضمان جودة وسلامة الإنتاج والالتزام بالمواصفات الفنية ومعايير الصحة والسلامة.</p> <h3 >المهام والمسؤوليات الأساسية</h3> <ul > <li >تشغيل ومراقبة آلات التعبئة بفعالية لضمان سير العمليات بسلاسة.</li> <li >التحقق المستمر من مطابقة المنتجات للمواصفات الفنية ومعايير الجودة المحددة.</li> <li >الالتزام الصارم بسياسات وإجراءات الصحة والسلامة والبيئة المعمول بها في الشركة.</li> </ul> <h3 >الصيانة الوقائية وضمان الجودة</h3> <ul > <li >تنظيف المعدات بانتظام وأداء مهام الصيانة الأساسية لضمان كفاءة الآلات.</li> <li >الإبلاغ الفوري عن أي أعطال أو مشاكل فنية لفنيي الصيانة أو الميكانيكيين المختصين.</li> <li >الاحتفاظ بسجل دقيق لجميع أعمال الصيانة المنجزة والتقارير المتعلقة بالأعطال.</li> <li >إجراء عمليات تفتيش روتينية للصيانة الوقائية للكشف عن أي أضرار أو تلفيات في الأجزاء.</li> <li >تحديد المشاكل المحتملة واتخاذ الإجراءات التصحيحية اللازمة لضمان استمرارية الإنتاج.</li> <li >تنفيذ إجراءات الاختبار والتأكد من أن الآلات تعمل على النحو الأمثل خلال مراحل الإنتاج.</li> </ul> <h3 >المؤهلات والخبرة</h3> <ul > <li >خبرة عملية تتراوح بين <strong>سنتين إلى 5 سنوات</strong> في تشغيل آلات التعبئة أو مجال صناعي ذي صلة.</li> <li >القدرة على تشغيل ومراقبة المعدات الصناعية بكفاءة.</li> <li >فهم جيد لمبادئ الصيانة الأساسية والوقائية.</li> <li >الالتزام بمعايير الجودة والسلامة المهنية.</li> </ul> <h3 >تفاصيل الوظيفة</h3> <p >هذه الوظيفة بدوام كامل ومقرها في <strong>جدة، مكة المكرمة</strong>. سيتم تحديد الراتب بناءً على الخبرة والمؤهلات.</p> <h3 >كيفية التقديم</h3> <p >ندعو المهتمين والذين يستوفون المتطلبات المذكورة أعلاه إلى تقديم طلباتهم.</p></div>

<h3>نبذة عن الدور</h3><p>تبحث كلية بيت البترجي للعلوم الطبية والتكنولوجيا عن <strong>فني أجهزة طبية</strong> للانضمام إلى فريقها في جدة، مكة المكرمة. يركز هذا الدور بدوام كامل على متابعة تركيب الأجهزة الطبية وتشغيلها، بالإضافة إلى تنفيذ برامج الصيانة الوقائية والعلاجية لضمان كفاءة الأداء.</p><h3>المهام والمسؤوليات الرئيسية</h3><ul><li>متابعة مخططات تركيب الأجهزة الطبية المتنوعة، مثل أجهزة غسل الكلى، وأجهزة دعم القلب والتنفس والرئة، وأجهزة التصوير والتخطيط الطبي.</li><li>تحديد مواقع التركيب ومتابعة إجراءات التثبيت، وإعداد قوائم بقطع الغيار الاحتياطية الضرورية.</li><li>متابعة إجراءات التشغيل التجريبي للأجهزة الطبية والتأكد من تشغيلها وفقاً لأدلة التشغيل المعتمدة.</li><li>تدريب مستخدمي الأجهزة الطبية على إجراءات التشغيل السليم والضبط الصحيح.</li><li>تتبع مخططات الدارات الإلكترونية للأجهزة الطبية وتشخيص الأعطال باستخدام أجهزة الفحص والقياس، ثم تنفيذ إجراءات الإصلاح والضبط اللازمة.</li><li>تنفيذ برامج الصيانة الوقائية للأجهزة الطبية حسب تعليمات الشركة المصنعة.</li><li>إعداد وتقديم وتوثيق وحفظ تقارير العمل بشكل دوري.</li></ul><h3>المؤهلات والخبرة</h3><ul><li>خبرة تتراوح من <strong>0 إلى 1 سنة</strong> في مجال صيانة وتركيب الأجهزة الطبية.</li><li>القدرة على فهم وتطبيق تعليمات الشركات المصنعة للأجهزة.</li></ul><h3>المهارات المطلوبة</h3><ul><li>مهارات فنية قوية في تشخيص وإصلاح الأعطال.</li><li>القدرة على قراءة وتتبع المخططات الفنية والكهربائية.</li><li>مهارات تواصل جيدة لتدريب المستخدمين وإعداد التقارير.</li><li>الالتزام بمعايير السلامة والجودة في التعامل مع الأجهزة الطبية.</li></ul><h3>بيئة العمل</h3><p>يعمل فني الأجهزة الطبية بدوام كامل ضمن فريق الكلية في مدينة جدة، مكة المكرمة. يتطلب الدور التفاعل المستمر مع الأجهزة الطبية المختلفة والموظفين لضمان سير العمل بكفاءة.</p><h3>معلومات إضافية</h3><p>الراتب الخاص بهذا الدور لم يتم الكشف عنه.</p>

<h3>نبذة عن الدور</h3><p>تبحث شركة فالح بنيه الرشيدي للمقاولات عن <strong>فني هندسة كهربائية</strong> للانضمام إلى فريقها في جدة، مكة المكرمة. يركز هذا الدور على تركيب وصيانة ومراقبة الأنظمة الكهربائية، وتقديم الدعم الفني للمهندسين. يتطلب الدور خبرة تتراوح بين سنتين وخمس سنوات في المجال.</p><h3>المهام والمسؤوليات الرئيسية</h3><ul><li>تركيب المحركات واللوحات والمولدات والمحولات الكهربائية والإشراف عليها ومراقبتها.</li><li>تقديم المساعدة للمهندسين الكهربائيين في حل المشكلات الفنية.</li><li>تحديد المخطط وكمية المواد والمعدات واليد العاملة المطلوبة بناءً على المخططات الأولية.</li><li>توجيه وتنسيق جهود العمال والفنيين والحرفيين الآخرين فيما يتعلق بأعمال التركيب الكهربائي.</li><li>اختبار الأنظمة بعد تركيبها لضمان التقيد بالمخطط الأولي والمواصفات المطلوبة.</li><li>القيام بعمليات الفحص الروتينية ضمن الصيانة الوقائية، وتشخيص الأعطال والتلف المحتمل.</li><li>اتخاذ الإجراءات التصحيحية اللازمة وإصلاح أو استبدال المكونات التالفة.</li><li>الاستجابة السريعة لعمليات الطوارئ للتقليل من فترات انقطاع التيار الكهربائي.</li></ul><h3>المؤهلات والخبرات</h3><ul><li>خبرة عملية تتراوح بين <strong>سنتين وخمس سنوات</strong> في مجال الهندسة الكهربائية أو مجال ذي صلة.</li><li>فهم جيد للمخططات الكهربائية والمواصفات الفنية.</li><li>القدرة على تشخيص الأعطال الكهربائية وإصلاحها.</li></ul><h3>نوع العمل والموقع</h3><p>هذا الدور هو وظيفة بدوام كامل ومقرها في مدينة <strong>جدة</strong> ضمن منطقة مكة المكرمة.</p><h3>ملخص الدور</h3><p>يعتبر فني الهندسة الكهربائية جزءًا أساسيًا من فريق العمل، حيث يساهم في ضمان كفاءة وسلامة الأنظمة الكهربائية من خلال التركيب والصيانة الدورية والاستجابة الفعالة للمشكلات. يتطلب الدور مهارات فنية قوية وقدرة على العمل الميداني.</p><h3>التقديم</h3><p>للمهتمين بالانضمام إلى شركة فالح بنيه الرشيدي للمقاولات، يرجى التقديم على هذا الدور الذي يتطلب خبرة عملية في المجال الكهربائي.</p>

<p>We are looking for an experienced <strong>CCTV Technician</strong> to handle the installation, configuration, testing, commissioning, troubleshooting, and maintenance of CCTV and ELV security systems.</p><p>Key Responsibilities</p><ul><li><p>Install, configure, test, and commission <strong>IP and analog CCTV systems</strong>.</p></li><li><p>Install and configure <strong>CCTV cameras, DVRs, NVRs, monitors, PoE switches, and related equipment</strong>.</p></li><li><p>Perform CCTV system troubleshooting, fault finding, and corrective maintenance.</p></li><li><p>Configure camera settings, recording systems, network connectivity, and remote viewing.</p></li><li><p>Perform <strong>Cat6/network cable termination, testing, and basic networking</strong>.</p></li><li><p>Carry out camera alignment, focusing, and positioning to ensure proper coverage.</p></li><li><p>Conduct preventive maintenance and attend customer sites for technical support.</p></li><li><p>Read and understand basic <strong>CCTV layouts, wiring diagrams, and technical drawings</strong>.</p></li><li><p>Coordinate with engineers, supervisors, clients, and subcontractors during project execution.</p></li><li><p>Prepare basic installation, maintenance, and service reports.</p></li><li><p>Ensure all work is completed according to project specifications and safety standards.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p><strong>2–4 years of experience</strong> as a CCTV Technician / ELV Technician.</p></li><li><p>Strong hands-on experience with <strong>IP CCTV, DVR/NVR, and CCTV troubleshooting</strong>.</p></li><li><p>Basic knowledge of <strong>networking, IP addresses, PoE, and switches</strong>.</p></li><li><p>Experience in CCTV installation, testing, commissioning, and maintenance.</p></li><li><p>Knowledge of <strong>Access Control, Intercom, or other ELV systems</strong> is an advantage.</p></li><li><p>UAE experience is preferred.</p></li><li><p><strong>Valid UAE Driving Licence</strong> is an advantage.</p></li><li><p>ITI / Diploma in Electrical, Electronics, Networking, or a related field is preferred.</p></li></ul>

<h3>About the Role</h3><p>Gulfmaid is seeking an <strong>Electronic Technician</strong> to join its team in Jeddah. This full-time role involves contributing to the innovation and efficiency of industrial production processes by working with advanced electronic systems and equipment. The Electronic Technician will play a key role in ensuring the smooth operation of machinery, helping to maintain high standards of productivity and quality.</p><h3>Role Contribution</h3><p>The position offers an opportunity for professional growth and knowledge expansion within a supportive environment. The company supports continuous learning and professional development through training programs and workshops. The Electronic Technician will collaborate with a dedicated team, fostering a culture of innovation and teamwork, and contributing to operational capabilities and career advancement.</p><h3>Key Responsibilities</h3><ul><li>Perform routine maintenance and repairs on electronic equipment, utilizing diagnostic tools to troubleshoot issues and ensure optimal performance.</li><li>Assist in the installation of new electronic systems, collaborating with engineers to integrate technology into existing processes.</li><li>Document all maintenance and repair activities meticulously, ensuring compliance with industry standards and facilitating knowledge sharing.</li><li>Conduct regular inspections of electronic systems, identifying potential issues before they escalate to maintain safety and reliability.</li><li>Provide technical support to production staff, offering guidance on the proper use of electronic equipment and troubleshooting common problems.</li><li>Stay updated on the latest advancements in electronic technology, attending training sessions and workshops to apply new knowledge and techniques.</li><li>Collaborate with cross-functional teams to implement process improvements, leveraging technical skills to enhance system efficiency.</li><li>Participate in safety audits and compliance checks, ensuring that all electronic systems meet regulatory requirements.</li><li>Assist in inventory management of electronic components, ensuring necessary supplies are available for maintenance and repair operations.</li></ul><h3>Qualifications and Experience</h3><ul><li>2-5 years of experience in a relevant electronic technician role.</li><li>Demonstrated ability to troubleshoot and repair electronic equipment.</li><li>Familiarity with diagnostic tools and maintenance procedures.</li><li>Strong documentation skills and attention to detail.</li><li>Ability to collaborate effectively with engineers and production staff.</li></ul><h3>Work Environment</h3><p>This is a full-time position based in Jeddah. The role involves working within a team-oriented environment that emphasizes continuous learning, professional development, and cross-functional collaboration to drive innovation and efficiency in industrial production.</p><h3>Application Process</h3><p>Candidates who meet the qualifications are encouraged to apply. Salary details will be discussed during the interview process.</p>

IT Help Desk Specialist Location: Jeddah | Shift: Morning<br>Diamond Glare is hiring an IT Help Desk Specialist with strong user support skills and hands-on experience supporting Odoo and its website and e Commerce operations.<br>Key Responsibilities:• Provide daily technical support, manage support tickets, and document issues and resolutions.• Install, configure, and maintain computers, printers, network devices, operating systems, and business applications.• Support Odoo users and troubleshoot common operational issues.• Maintain website content, product listings, images, categories, and navigation, coordinating with the relevant departments.• Test website and online store functions, including search, cart, checkout, and order creation; investigate issues and escalate technical faults.• Support Microsoft 365, Google Workspace, email, user accounts, and access permissions.• Maintain IT asset and equipment assignment records, train employees, and follow information security policies.<br>Requirements:• A diploma or bachelor’s degree in IT, Computer Science, or a related technical field is mandatory.• 3–5 years of relevant IT support experience.• Hands-on proficiency in Odoo 19, including Website and e Commerce, is mandatory.• Strong knowledge of Windows, networking fundamentals, hardware troubleshooting, and email administration.• Ability to identify and document website issues and coordinate with developers and service providers.• Effective use of AI tools for troubleshooting and productivity while protecting company data.• Good English, communication, prioritization, and problem-solving skills.• Relevant professional certifications and experience in the equipment or hospitality sector are preferred.<br>————————————<br>أخصائي دعم فنيالموقع: جدة | الدوام: صباحي<br>تعلن شركة وهج الماس للتجارة والتسويق المحدودة (Diamond Glare) عن حاجتها إلى أخصائي دعم فني يمتلك خبرة عملية في دعم المستخدمين ونظام أودو وموقعه ومتجره الإلكتروني.<br>المهام الرئيسية:• تقديم الدعم اليومي وإدارة التذاكر الفنية وتوثيق المشكلات والحلول.• تركيب وإعداد وصيانة أجهزة الكمبيوتر والطابعات والشبكات والأنظمة والتطبيقات.• دعم مستخدمي أودو ومعالجة المشكلات التشغيلية الشائعة.• تحديث محتوى الموقع وبيانات المنتجات والصور والتصنيفات والقوائم بالتنسيق مع الأقسام المعنية.• اختبار وظائف الموقع والمتجر، بما يشمل البحث والسلة وإتمام الشراء وإنشاء الطلبات، ومتابعة الأعطال وتصعيد المشكلات التقنية.• دعم Microsoft 365 وGoogle Workspace والبريد وحسابات المستخدمين وصلاحيات الوصول.• جرد الأجهزة ومتابعة العهد التقنية وتدريب الموظفين والالتزام بسياسات أمن المعلومات.<br>المتطلبات:• دبلوم أو بكالوريوس في تقنية المعلومات أو علوم الحاسب أو تخصص تقني ذي صلة — شرط أساسي.• خبرة من 3 إلى 5 سنوات في الدعم الفني.• إجادة عملية لنظام Odoo 19، بما يشمل Website و e Commerce — شرط أساسي.• معرفة قوية بويندوز وأساسيات الشبكات وتشخيص أعطال الأجهزة وإدارة البريد.• القدرة على تشخيص مشكلات الموقع وتوثيقها والتنسيق مع المطورين ومزودي الخدمات.• إجادة توظيف أدوات الذكاء الاصطناعي في العمل مع المحافظة على بيانات الشركة.• مستوى جيد في الإنجليزية ومهارات التواصل وحل المشكلات وترتيب الأولويات.• يفضل وجود شهادات مهنية تقنية وخبرة في قطاع المعدات أو الضيافة.

ARX is a global network of specialists in engineering, design, and architecture. Our team offers 360° consulting, project management, and technical services in:<br><br>airports, bridges, buildings, cableways,<br><br>digital innovation, environment, equipment,<br><br>geology, geotechnics, hydropower, metros,<br><br>nuclear plants, oil & gas, pipelines, ports,<br><br>railways, river engineering, roads, traffic,<br><br>tunnels, and water/wastewater treatment.<br><br>With offices across Europe, North and South America, Asia, Africa, and Oceania, our agile task force combines global expertise with local know-how. The result is our uniquely "glocal" approach, which allows us to meet the specific needs of each community while incorporating international best practices. At ARX, smart minds strive for a sustainable future, transforming communities one innovative project at a time.<br><br>People are the heart and soul of ARX. We are a home for innovators, visionaries, and experts to develop talents, launch careers, and collaborate with fellow specialists. ARX values individuals. Believing their brilliance and determination will provide solutions to tomorrow's challenges, we welcome professionals who will both benefit from and enrich our team.<br><br>ARX, marks a significant expansion into the Middle East with its offices in UAE and KSA. This underscores our dedication to innovation and engineering excellence, bolstering our position in the dynamic GCC market.<br><br>For our office in Riyadh, we are looking for<br><br>Senior Wet Utilities Engineer - 100% (m/f)<br><br>The ideal candidate will have a minimum of 8 years of experience in infrastructure projects, with at least 3 years of experience working within the KSA. This role requires a deep understanding of wet utility networks, including potable water, wastewater/sewerage, irrigation/TSE, and fire water systems<br><br>Responsibilities:<br><br>Design, plan, and oversee the design of wet utility systems for various infrastructure projects. Perform and review hydraulic calculations, network modelling, pipe sizing, and other engineering analyses required for wet utility systems. Ensure all wet utilities designs comply with local regulations, standards, and best practices. Coordinate with project managers and other engineering disciplines to integrate wet utility systems seamlessly into overall project designs. Coordinate utility corridors, crossings, connections, diversions, and interfaces with other infrastructure disciplines. Prepare detailed engineering reports, plans, and documentation. Review designs and technical deliverables prepared by engineers, designers, and BIM/CAD team. Provide technical guidance and support to junior engineers and other team members. Liaise with government authorities, clients, and other stakeholders to ensure all project requirements are met.<br><br>Requirements:<br><br>Bachelor's degree in civil engineering, or a related field. Minimum of 8 years of experience in infrastructure projects with a focus on wet utilities. At least 3 years of relevant experience in the KSA is mandatory. Strong knowledge of wet utility systems, including design and construction practices. Strong knowledge of relevant KSA codes, standards, and utility authority requirements. Proficiency in relevant engineering design and hydraulic modelling software such as Civil 3D, Water GEMS and Sewer GEMS. Fluency in English is required; proficiency in Arabic is a plus.<br><br>We Offer:<br><br>Opportunity to collaborate with a forward-thinking, synergistic, and innovative team. Exposure to cutting-edge projects driving Middle East / North African regions development. Personalized professional growth and developmental avenues tailored to your career aspirations.<br><br>If you would you like to join our highly motivated and very successful team, please send us your complete application!<br><br>Sector: Construction / Civil Engineering<br><br>Role: Engineering / Design Engineering<br><br>Will manage other people: Yes<br><br>Job type: Permanent job<br><br>Career level: Employee

تعلن شركة بناء وإبداع للمقاولات عن توفر فرصتين وظيفيتين للانضمام إلى فريق العمل بمدينة الرياض:<br>1️⃣ مهندس تنفيذ مواقع – مدني أو معماري<br>* خبرة في تنفيذ الأعمال الإنشائية وأعمال التشطيبات.* خبرة سابقة في مشاريع بمدينة الرياض.* القدرة على إدارة الموقع ومتابعة العمالة والمقاولين.* الالتزام بالجودة والبرنامج الزمني للمشروع.<br>2️⃣ مهندس مكتب فني – ديكور أو معماري<br>* خبرة في أعمال التصميم وإعداد المخططات التنفيذية.* خبرة في دراسة وتسعير المشاريع.* إجادة حصر الكميات وإعداد جداول الكميات BOQ.* إجادة استخدام البرامج الهندسية ذات الصلة.<br>???? مقر العمل: الرياض???? يرجى إرسال السيرة الذاتية مع كتابة المسمى الوظيفي في عنوان الرسالة إلى:<br>biccv82@gmail.com<br>شركة بناء وإبداع للمقاولاتنبحث عن الكفاءات الطموحة للانضمام إلى فريقنا.

<h3>About Magrabi Health</h3><p>Magrabi Health is a healthcare provider operating hospitals and centers across the region. The organization is committed to maintaining high operational standards and ensuring optimal environmental conditions within its facilities.</p><h3>The Role of Heating Air Conditioning Technician</h3><p>Magrabi Health is seeking a Heating Air Conditioning Technician to join its team in Jeddah and Makkah, Saudi Arabia. This full-time role is responsible for the maintenance, troubleshooting, and repair of heating, ventilation, and air-conditioning (HVAC) systems across assigned hospitals and centers. The technician ensures reliable HVAC operation, appropriate indoor environmental conditions, and timely responses to maintenance requirements.</p><h3>Key Responsibilities</h3><ul><li>Perform preventive and corrective maintenance on HVAC systems and equipment.</li><li>Inspect, troubleshoot, and repair Air Handling Units (AHUs), Fan Coil Units (FCUs), split units, package units, and various ventilation and exhaust systems.</li><li>Monitor HVAC equipment performance and report any abnormalities.</li><li>Respond promptly to HVAC breakdowns and maintenance requests.</li><li>Conduct routine inspections of filters, motors, belts, fans, coils, thermostats, and other related components.</li><li>Support the operation and basic troubleshooting of chilled-water systems and pumps, where applicable.</li><li>Maintain appropriate temperature and ventilation conditions, particularly in critical hospital areas.</li><li>Coordinate with Facilities/Engineering teams and external contractors for major repairs.</li><li>Adhere to safety procedures, permit-to-work requirements, and proper Personal Protective Equipment (PPE) practices.</li><li>Maintain accurate records of preventive maintenance, repairs, and inspections.</li><li>Support facility inspections and readiness for accreditation processes.</li></ul><h3>Qualifications and Experience</h3><ul><li>2-5 years of experience in HVAC maintenance and repair.</li><li>Demonstrated ability to troubleshoot and repair a variety of HVAC systems.</li><li>Knowledge of safety procedures and best practices in HVAC maintenance.</li></ul><h3>Work Location</h3><p>This position is based in Jeddah and Makkah, Makkah Province, Saudi Arabia.</p><h3>Application Process</h3><p>Interested candidates are invited to apply for this full-time position. Salary details will be discussed during the interview process.</p>