Heavy equipment mechanical engineer Jobs

<h3><strong>About Parsons and the Opportunity</strong></h3><p>Parsons Corporation is seeking a <strong>Lead Engineer - Fuel</strong> to join its team in Riyadh. This full-time position requires 5-10 years of experience and involves providing technical leadership and coordination for complex aviation fuel systems and infrastructure projects.</p><h3><strong>Role Overview</strong></h3><p>The Lead Engineer - Fuel will be responsible for providing comprehensive technical engineering support and coordination across the entire project lifecycle, from design and construction to testing, commissioning, and handover of aviation fuel systems and associated infrastructure. This role ensures that all engineering activities comply with approved designs, project specifications, applicable aviation fuel standards, international codes, and client requirements. Close coordination with design consultants, contractors, and various project teams is essential for effective technical delivery and issue resolution.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Lead and coordinate engineering activities for aviation fuel systems and infrastructure.</li><li>Review and coordinate the design and technical delivery of fuel storage, distribution, transfer, and dispensing systems.</li><li>Evaluate engineering deliverables including drawings, specifications, calculations, technical reports, and equipment data sheets.</li><li>Ensure fuel system designs adhere to project specifications, client requirements, and industry standards.</li><li>Coordinate interfaces between Fuel Systems and other disciplines such as Civil, Structural, Mechanical, Electrical, Instrumentation, ICT, Fire &amp; Life Safety, and Airfield.</li><li>Review fuel demand, flow, system capacity, pressure requirements, and hydraulic calculations.</li><li>Provide technical support for fuel pumping, transfer, filtration, metering, control, and monitoring systems.</li><li>Review technical requirements for pumps, valves, filters, meters, tanks, instrumentation, and control panels.</li><li>Support technical review of fuel hydrant systems, including pits, isolation valves, control systems, and aircraft servicing interfaces.</li><li>Review design provisions for isolation, drainage, venting, pressure control, emergency shutdown, leak detection, and system safety.</li><li>Coordinate with relevant disciplines regarding hazardous area classification and equipment requirements.</li><li>Review vendor and contractor technical submittals for compliance with approved specifications.</li><li>Respond to RFIs, technical queries, design clarifications, and site technical issues.</li><li>Provide engineering support to construction teams and assist in resolving installation issues.</li><li>Participate in design and constructability reviews to identify potential technical and interface issues.</li><li>Coordinate with Quality teams on inspection and testing requirements.</li><li>Review and support preparation of Inspection &amp; Test Plans (ITPs), testing procedures, and commissioning requirements.</li><li>Provide technical support during fuel system installation, testing, pre-commissioning, and commissioning.</li><li>Verify testing activities including pressure testing, pipeline integrity testing, flushing, cleaning, leak testing, and functional testing.</li><li>Support commissioning teams during system start-up, functional testing, and performance verification.</li><li>Review technical documentation and ensure engineering records are maintained throughout project execution.</li><li>Review and coordinate as-built drawings, technical dossiers, O&amp;M documentation, and handover requirements.</li><li>Support the assessment of design changes, technical alternatives, and engineering variations.</li><li>Provide technical input for engineering-related changes and potential claims.</li><li>Identify technical risks, design gaps, constructability issues, and interface constraints, recommending mitigation measures.</li><li>Participate in engineering coordination meetings with consultants, contractors, vendors, and project stakeholders.</li><li>Track engineering actions, technical comments, RFIs, and design deliverables for timely closure.</li><li>Support the development of technical solutions to improve system reliability, maintainability, safety, and operational performance.</li><li>Provide technical guidance and support to Fuel Engineers and junior engineering personnel.</li><li>Maintain effective communication with construction and commissioning teams to ensure proper implementation of engineering requirements on site.</li></ul><h3><strong>Required Skills and Experience</strong></h3><p>Candidates for this role should possess 8+ years of relevant experience in fuel systems engineering and demonstrate the following skills:</p><ul><li>Strong technical and analytical skills.</li><li>Sound engineering judgment and problem-solving abilities.</li><li>Strong coordination and interface management skills.</li><li>Excellent communication and stakeholder management capabilities.</li><li>Ability to work effectively with consultants, contractors, vendors, and multidisciplinary teams.</li><li>Strong attention to detail and commitment to engineering quality.</li><li>Proactive approach to identifying technical issues and risks.</li><li>Ability to work under demanding project schedules.</li><li>Strong teamwork and collaboration skills.</li><li>Ability to provide technical guidance to junior engineers.</li><li>Good understanding of construction and commissioning requirements.</li><li>Strong commitment to safety, quality, and technical compliance.</li></ul><h3><strong>Compliance and Technical Standards</strong></h3><p>A critical aspect of this role involves ensuring strict compliance with applicable industry standards and codes. The Lead Engineer - Fuel will be responsible for upholding adherence to JIG, EI/JIG, NFPA, API, ASME, ASTM, IEC, ISO, and other relevant standards pertinent to the project's scope and requirements.</p><h3><strong>Work Environment</strong></h3><p>This full-time position is based in Riyadh, where the Lead Engineer - Fuel will collaborate with diverse project teams and stakeholders to deliver critical aviation fuel infrastructure projects.</p>

<h3 >About the Role</h3> <p >Alfanar Engineering Services is seeking experienced and highly motivated <strong >Testing &amp; Commissioning (T&amp;C) Engineers</strong> to join their team. This full-time position is based in Eastern, Saudi Arabia, and requires a professional with a strong background in HV/EHV Substation Testing &amp; Commissioning.</p> <h3 >Key Responsibilities</h3> <ul > <li >Perform testing and commissioning of HV/EHV substations ranging from *** to 380kV.</li> <li >Execute pre-commissioning and commissioning activities for Power Transformers, GIS/AIS Switchgear, Circuit Breakers, Disconnectors &amp; Earthing Switches, Current Transformers (CTs), Voltage Transformers (VTs/CVTs), Protection &amp; Control Panels, and SCADA &amp; Communication Systems.</li> <li >Carry out protection relay testing, configuration, and validation.</li> <li >Perform primary and secondary injection testing.</li> <li >Conduct transformer testing, including Transformer Turns Ratio (TTR), Winding Resistance, Insulation Resistance, and Functional Tests.</li> <li >Verify control logic, protection schemes, and interlocks.</li> <li >Support system energization and synchronization activities.</li> <li >Troubleshoot equipment and system issues during commissioning.</li> <li >Prepare commissioning procedures, test reports, and punch lists.</li> <li >Coordinate with clients, consultants, and project stakeholders.</li> <li >Ensure compliance with project specifications, quality standards, and safety requirements.</li> <li >Prepare daily, weekly, and final commissioning reports.</li> </ul> <h3 >Qualifications and Requirements</h3> <ul > <li >Bachelor's Degree in Electrical Engineering (* / ******</li> <li >Minimum of <strong >5 to 10 years of experience</strong> in Testing &amp; Commissioning of HV/EHV substations.</li> <li >Strong knowledge of protection relays, control systems, SCADA, and communication networks.</li> <li >Hands-on experience with GIS/AIS substations and transformer testing.</li> <li >Ability to interpret electrical drawings, schematics, and protection logic diagrams.</li> </ul> <h3 >Required Skills</h3> <ul > <li >Strong communication skills.</li> <li >Problem-solving abilities.</li> </ul> <h3 >Work Environment</h3> <p >This role requires a willingness to work across various project locations within Saudi Arabia.</p> <h3 >Application</h3> <p >Alfanar Engineering Services invites qualified candidates to apply for this position.</p>

<strong>Job Description<br><br></strong><strong>Exceptional Hospitality Starts with You<br><br></strong>Picture yourself brightening someone’s day. When you join our Hotels team, that’s exactly what you’ll do every time you come to work! As a <strong>Chief Engineer / Maintenance Manager</strong>, you’re not just overseeing physical building and systems maintenance and repairs – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.<br><br><strong>Responsibilities<br><br></strong>Here's what you'll do during a typical day:<br><br><ul><li>Lead and develop a high-performing team: Recruit, train, supervise, and mentor team members; conduct performance evaluations, provide professional development opportunities, and recognise achievements to build a motivated and high-performing team </li><li>Ensure safety and compliance: Oversee the maintenance of the physical building, mechanical systems, electrical systems, HVAC, and life safety systems, coordinate inspections, and uphold safety and compliance standards in line with national and local regulations </li><li>Manage daily maintenance operations: Oversee maintenance activities, prioritize tasks, and verify completion through the property maintenance management system; ensure timely resolution of service requests, guest concerns, and emergencies </li><li>Support property improvement projects: Assist in directing capital projects and property rehabilitations – including scheduling, budgeting, contractor bidding, and licensing/permitting – while ensuring regulatory compliance </li><li>Lead energy efficiency initiatives: Develop and oversee property-wide energy conservation programs to reduce utility costs</li><li>Drive engineering performance: Monitor departmental Key Performance Indicators (KPIs), including equipment upkeep, audit results, and team productivity and act as need to improve performance</li><li>Support hotel-wide operational leadership: Collaborate with the broader hotel leadership team in overseeing evacuation procedures, duty manager coverage, and other safety protocols as needed<br><br></li></ul><strong>Qualifications<br><br></strong><strong>What It Takes to Make the Stay<br><br></strong>At Hilton, Our Core Values Define What It Takes To Succeed Here And Guide The Qualities We Look For In Every Team Member<br><br>A passion for spreading the light and warmth of <strong>Hospitality</strong>. Acting with <strong>Integrity</strong> and always doing the right thing. Inspiring others through <strong>Leadership</strong>. A belief that <strong>Teamwork</strong> drives the best outcomes. A sense of <strong>Ownership</strong> and accountability. And a focus on the <strong>Now</strong>, bringing urgency and discipline to every moment, knowing it can make a lasting impact.<br><br><strong>About Us<br><br></strong><strong>Join an Award-Winning Workplace Culture<br><br></strong>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the Team Members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.<br><br>Our award-winning culture has earned us repeated recognition on the World’s Best Workplaces list by Great Place to Work and Fortune. With our suite of world-class brands , and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.<br><br>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.<br><br>Curious about life at Hilton? Explore our Careers Blog to see why we’re more than a great place to stay—we’re a great place to work.

<p>In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.</p><p>Parsons is looking for an amazingly talented Utility / Infrastructure Engineer to join our team! The Utility / Infrastructure Engineer will be responsible for the technical coordination, review, construction support, inspection, testing, and handover of infrastructure and utility systems across the project. The role will ensure that utility works are delivered in accordance with approved designs, project specifications, applicable codes and standards, authority requirements, and client requirements. The position will coordinate closely with Civil, Structural, Mechanical, Electrical, Survey, BIM, Construction, Quality, HSE, Planning, Contractors, Utility Authorities, and other project stakeholders to ensure effective delivery of infrastructure and utility networks.</p><p><strong>What You'll Be Doing:</strong></p><ul><li>Coordinate and provide technical engineering support for utility and infrastructure works across the project.</li><li>Review IFC drawings, specifications, design calculations, utility layouts, profiles, and technical documents.</li><li>Review and coordinate utility networks including: Potable water Irrigation water Fire water Stormwater drainage Foul sewer TSE / treated sewage effluent District cooling / chilled water networks Fuel systems interfaces Electrical utilities and duct banks ICT / telecommunications ducting Other underground and above-ground infrastructure systems, as applicable.</li><li>Coordinate utility interfaces with roads, pavements, buildings, structures, airfield facilities, and existing infrastructure.</li><li>Review utility routes, corridors, levels, slopes, profiles, and connection points.</li><li>Verify that utility designs consider capacity, hydraulic requirements, constructability, maintainability, and future expansion.</li><li>Review hydraulic calculations and network capacity requirements for applicable utility systems.</li><li>Review pipe sizing, pressure requirements, flow rates, gradients, invert levels, manholes, chambers, valves, and associated infrastructure.</li><li>Coordinate utility crossings and interfaces with existing and proposed infrastructure.</li><li>Identify clashes and technical interfaces between utility networks and other disciplines.</li><li>Coordinate with BIM teams to support utility clash detection and 3D coordination.</li><li>Review contractor shop drawings, material submittals, method statements, and technical submissions.</li><li>Verify proposed utility materials and equipment comply with approved specifications and project requirements.</li><li>Provide technical support to construction teams during utility installation activities.</li><li>Conduct site inspections and verify installation against approved drawings and specifications.</li><li>Monitor utility installation including excavation, bedding, pipe laying, jointing, backfilling, chambers, manholes, protection, and reinstatement.</li><li>Verify utility levels, alignment, gradients, coordinates, and dimensional requirements in coordination with the Survey team.</li><li>Coordinate with Survey Engineers regarding setting-out and as-built verification.</li><li>Review and witness utility testing activities including pressure testing, leakage testing, flushing, disinfection, CCTV inspection, flow testing, and other applicable tests.</li><li>Review testing and commissioning procedures and verify test results.</li><li>Coordinate with relevant authorities and utility service providers for connections, inspections, approvals, and technical requirements.</li><li>Support coordination with existing utility owners and stakeholders to avoid disruption to operational services.</li><li>Review and resolve RFIs, technical queries, design clarifications, and site engineering issues.</li><li>Assess proposed design changes, technical alternatives, and deviations and provide engineering recommendations.</li><li>Identify utility conflicts, constructability issues, capacity constraints, and technical risks and recommend mitigation measures.</li><li>Support preparation and review of Inspection &amp; Test Plans (ITPs) for utility works.</li><li><br></li></ul><p><strong>What Required Skills You'll Bring:</strong></p><ul><li>Bachelor s degree in Civil Engineering, Mechanical Engineering, Utilities Engineering, or a related discipline.</li><li>5+ years of relevant experience in utilities, infrastructure, civil works, or major construction projects.</li><li>Proven experience in airport, infrastructure, roads, utilities, or large-scale development projects.</li><li>Good understanding of underground utility networks and infrastructure systems.</li><li>Experience in multidisciplinary coordination and utility interface management.</li><li>Experience working with contractors, consultants, authorities, and utility service providers.</li><li>Professional Engineering certification is preferred.</li><li>PMP or equivalent project management training is an advantage.</li><li>Relevant utility / infrastructure certifications are an advantage.</li><li>AutoCAD Civil 3D / BIM / utility coordination training is preferred.</li><li>Relevant HSE certification is an advantage.</li></ul><p>Utility Infrastructure Engineering Underground Utility Networks Water Supply Networks Fire Water Networks Irrigation Networks Sewer &amp; Foul Drainage Stormwater Drainage TSE / Recycled Water Systems District Cooling / Chilled Water Networks Utility Corridors Utility Diversions &amp; Relocations Utility Crossings Pipework &amp; Chambers Hydraulic Calculations Pipe Sizing &amp; Network Capacity Levels, Profiles &amp; Gradients Utility Clash Detection BIM / 3D Utility Coordination Shop Drawing Review Material Submittal Review Method Statement &amp; ITP Review Site Inspection &amp; Construction Support Pressure &amp; Leakage Testing Flushing &amp; Disinfection CCTV / Drainage Inspection Survey &amp; As-Built Verification RFI &amp; Technical Query Management NCR &amp; Corrective Action Management Authority / Utility Provider Coordination As-Built &amp; Handover Documentation AutoCAD / Civil 3D / BIM Applicable AWWA / ASTM / ASME / BS / EN / NFPA Standards</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Civil Engineering, Mechanical Engineering, Utilities Engineering, or a related discipline.</li><li>5+ years of relevant experience in utilities, infrastructure, civil works, or major construction projects.</li><li>Proven experience in airport, infrastructure, roads, utilities, or large-scale development projects.</li><li>Good understanding of underground utility networks and infrastructure systems.</li><li>Experience in multidisciplinary coordination and utility interface management.</li><li>Experience working with contractors, consultants, authorities, and utility service providers.</li><li>Professional Engineering certification is preferred.</li><li>PMP or equivalent project management training is an advantage.</li><li>Relevant utility / infrastructure certifications are an advantage.</li><li>AutoCAD Civil 3D / BIM / utility coordination training is preferred.</li><li>Relevant HSE certification is an advantage.</li></ul><p>Utility Infrastructure Engineering Underground Utility Networks Water Supply Networks Fire Water Networks Irrigation Networks Sewer &amp; Foul Drainage Stormwater Drainage TSE / Recycled Water Systems District Cooling / Chilled Water Networks Utility Corridors Utility Diversions &amp; Relocations Utility Crossings Pipework &amp; Chambers Hydraulic Calculations Pipe Sizing &amp; Network Capacity Levels, Profiles &amp; Gradients Utility Clash Detection BIM / 3D Utility Coordination Shop Drawing Review Material Submittal Review Method Statement &amp; ITP Review Site Inspection &amp; Construction Support Pressure &amp; Leakage Testing Flushing &amp; Disinfection CCTV / Drainage Inspection Survey &amp; As-Built Verification RFI &amp; Technical Query Management NCR &amp; Corrective Action Management Authority / Utility Provider Coordination As-Built &amp; Handover Documentation AutoCAD / Civil 3D / BIM Applicable AWWA / ASTM / ASME / BS / EN / NFPA Standards</p><p><strong>What Desired Skills You'll Bring:</strong></p><ul><li>Strong technical and analytical skills.</li><li>Excellent problem-solving and engineering judgment.</li><li>Strong multidisciplinary coordination and interface management skills.</li><li>Excellent communication and stakeholder management capabilities.</li><li>Strong attention to detail and commitment to engineering quality.</li><li>Proactive approach to identifying utility conflicts and project risks.</li><li>Ability to coordinate multiple utility interfaces simultaneously.</li><li>Good understanding of construction sequencing and site requirements.</li><li>Ability to work effectively with contractors, consultants, authorities, and project teams.</li><li>Strong documentation and reporting skills.</li><li>Ability to work under demanding project schedules.</li><li>Strong teamwork and collaboration skills.</li><li>Commitment to safety, quality, reliability, and technical compliance.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring for the position of <b>Maintenance Engineer</b> in <b>Khafji, Saudi Arabia</b>. This opportunity is within the Community Maintenance Support Division and requires an experienced engineering professional capable of developing and implementing maintenance programs that ensure the safe, reliable, and efficient operation of equipment and machinery. The Maintenance Engineer will work closely with Maintenance Technicians, Planners, Schedulers, Operations, HSE, Engineering teams, vendors, and contractors to improve equipment reliability and optimize maintenance processes.<br></p><br>Key Responsibilities<br><ul><li>Develop and implement preventive maintenance programs for critical equipment and machinery.<br></li><li>Optimize maintenance activities to minimize unplanned downtime, control maintenance costs, and improve asset life cycles.<br></li><li>Coordinate with Maintenance Planners and Schedulers to plan and execute preventive and corrective maintenance activities.<br></li><li>Conduct root cause analyses of equipment failures and implement effective corrective actions.<br></li><li>Identify maintenance process improvement opportunities and lead continuous improvement initiatives.<br></li><li>Collaborate with Operations, HSE, and Engineering teams to ensure maintenance activities meet operational and regulatory requirements.<br></li><li>Ensure compliance with applicable health, safety, and environmental requirements for equipment maintenance and reliability.<br></li><li>Provide maintenance and reliability input to project teams during design and construction of new equipment and facilities and coordinate with internal departments, vendors, and contractors.<br></li></ul>Required Skills<br><ol><li><b>Preventive Maintenance:</b> Ability to develop and implement structured preventive maintenance programs for critical equipment.<br></li><li><b>Equipment Reliability:</b> Strong understanding of reliability improvement, downtime reduction, and asset life-cycle optimization.<br></li><li><b>Root Cause Analysis:</b> Ability to investigate equipment failures, determine underlying causes, and establish corrective actions.<br></li><li><b>Maintenance Planning &amp; Scheduling:</b> Experience coordinating preventive and corrective maintenance with planners and schedulers.<br></li><li><b>HSE &amp; Maintenance Compliance:</b> Knowledge of health, safety, and environmental requirements associated with maintenance activities.<br></li></ol>Preferred Skills<br><ul><li>Continuous improvement and maintenance optimization.<br></li><li>Cross-functional coordination with Operations, Engineering, and HSE teams.<br></li><li>Vendor and contractor coordination.<br></li></ul>Work Experience Requirements<br><p>Candidates must have a <b>minimum of 10 years of relevant experience</b>. Experience should include maintenance engineering, equipment reliability, preventive/corrective maintenance, failure analysis, and coordination of maintenance activities in an engineering or asset-intensive environment.<br></p><br>Education<br><p><b>Minimum:</b> Bachelor’s Degree in Civil Engineering, Electrical Engineering, or Maintenance Engineering<br></p><br>Contact Number - 9786888866 <br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Leica Biosystems’ mission of “Advancing Cancer Diagnostics, Improving Lives” is at the heart of our corporate culture. We’re a global leader in cancer diagnostics with the most comprehensive portfolio from biopsy to diagnosis. Our easy-to-use and consistently reliable offerings help improve workflow efficiency and diagnostic confidence. Our associates know that every moment matters when it comes to cancer diagnostics.</p><br><p>When you come to work, you’re helping develop solutions that enable accurate diagnoses to turn anxiety into answers. Join our diverse, global team of talented people, and be inspired to grow every day.</p><br><p><i><b>Leica Biosystems</b></i> is proud to work alongside a community of six fellow Diagnostics Companies at Danaher. Together, we’re working at the pace of change to improve patient lives with diagnostic tools that address the world’s biggest health challenges.</p><br><p>The <b>Field Service Engineer </b>for <i><b>Leica Biosystems</b></i> is responsible for delivering, promoting and selling high quality onsite technical service within Saudi to achieve high customer satisfaction while meeting the Organization’s Revenue &amp; KPI targets.</p><br><p>Primary responsibility is performing onsite service &amp; maintenance activities for various histopathology and associated instruments in <i><b>Leica Biosystems</b></i> portfolio</p><br><p>The <b>Field Service Engineer</b> will also need to be readily available to support customers and colleagues in a proactive and timely fashion with the objective of maximizing customer satisfaction.</p><br><p>Visit customers for installations, preventative maintenance, repairs, fault analysis and upgrades in order to achieve high customer satisfaction and ensure a professional repair in due time with effective, efficient &amp; safe work practices. Provide phone support &amp; occasional Helpdesk support to reduce customer downtime. Perform root cause analysis in the field or in the business / manufacturing unit.</p><br><p>This position is to provide onsite support within Saudi, with occasional support within the EU where necessary.</p><br><p>This position is part of the <b>Field Service</b> team located in Saudi and will be fully remote. At <i><b>Leica Biosystems</b></i>, our vision is to advance cancer diagnostics and improve lives.</p><br><p>You will report to the Team Leader Service. If you thrive in a dynamic, technical, fast paced role and want to contribute towards a worldclass Technical Service organization—read on</p><br><p><u><b>In this role, you will have the opportunity to:</b></u></p><br><p>• Visit customers to perform preventative maintenance, repairs, fault analysis, and upgrades to achieve optimum customer care and</p><br><p>ensure a professional repair in due time with effective and efficient working practices contributing to team goals/KPI’s.</p><br><p>• On-site installation of various Histopathology and ancillary equipment</p><br><p>• Deliver accurate reporting, handling and timely submission of Salesforce reports, Expenses, Stock management and other relevant</p><br><p>service documentation</p><br><p>• Work closely with Field Support Team to ensure all customers are provided with an industry leading professional After Sales Service within the KPI’s set by Service Management.</p><br><p>• Co-operate closely with and support the sales team with tasks such as basic training for customers, installations, demonstrations and systems builds.</p><br><p>• Exchange valuable information resulting from customer contacts to increase customer satisfaction. Document customer information with the CRM &amp; Service management systems in a timely manner. Collect, update &amp; distribute knowledge with the product specialists.</p><br><p><b><u>The essential requirements of the job include:</u></b></p><br><p>• Bachelor’s degree in Mechanical, Electronic or Electrical subject.</p><br><p>• 5 years experience in Field Service or a related field histopathology equipment’s.</p><br><p>• Knowledge of network configuration and setup such as firewalls and TCP/IP networking components in a Windows environment is advantageous.</p><br><p>• Excellent communication skills, verbal and written with ability to communicate across different levels internally and at customer sites</p><br><p>• Proven ability to learn independently in technical areas and build experience</p><br><p>• Ability to carry &amp; move up to 25kg safely.</p><br><p>• Strong problem-solving and analytical skills</p><br><p>• High commitment to maintaining/improving service levels</p><br><p>• Open mindset and customer focus</p><br><p>Travel:</p><br><p>Must be willing to travel within their defined territory up to 80% of their time</p><br><p>Language: Arabic And English</p><br><p>At Leica Biosystems we believe in designing a better, more sustainable workforce. We recognize the benefits of flexible, remote working arrangements for eligible roles and are committed to providing enriching careers, no matter the work arrangement. This position is eligible for a remote work arrangement in which you can work remotely from your home. Additional information about this remote work arrangement will be provided by your interview team. Explore the flexibility and challenge that working for Leica Biosystems can provide.</p><br><p><span>Join our winning team today. Together, we’ll accelerate the real-life impact of tomorrow’s science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life.</span></p><br><p><span>For more information, visit </span><span>www.danaher.com</span><span>.</span></p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Job Description<br><br>We are seeking an experienced Civil Engineer with specialized airport project experience to join our team in Jeddah, Saudi Arabia.<br><br>The Civil Engineer will provide technical expertise, design review, construction supervision, quality assurance, and multidisciplinary coordination as part of the PMC team delivering airport infrastructure and building-related projects.<br><br>The role will focus on the planning, review, and supervision of airside civil works, including aircraft aprons, pavements, taxiway interfaces, internal roads, earthworks, drainage systems, site investigations, borehole surveys, topographical surveys, GPR scanning, utility coordination, and civil works associated with airport buildings and facilities.<br><br>The successful candidate will ensure that all design and construction activities are executed in accordance with project requirements, approved drawings, technical specifications, and applicable industry standards, including ICAO, GACAR, FAA, Saudi Building Code, and relevant international engineering standards. The role requires close collaboration with contractors, consultants, airport operations, and multidisciplinary engineering teams to ensure the safe, efficient, and compliant delivery of airport infrastructure projects.<br><br> <br><br>Key Responsibilities<br><br>Review and supervise the design and construction of aircraft aprons, taxiways, airside pavements, service roads, and airport infrastructure. Oversee pavement engineering activities including rigid, flexible, heavy-duty, and aircraft stand pavements, ensuring compliance with applicable standards and specifications. Monitor earthworks, grading, excavation, compaction, drainage, and roadworks within operational airport environments. Review and coordinate geotechnical investigations, borehole surveys, topographical surveys, and GPR scanning activities. Assess survey data, geotechnical reports, pavement designs, utility investigations, and construction methodologies. Coordinate interfaces with AGL, drainage, utilities, fuel hydrant, ICT/CNS, electrical, structural, architectural, and MEP systems. Conduct design reviews at Concept, Schematic, Detailed Design, Tender, and IFC stages. Review technical submissions including RFIs, shop drawings, material submittals, method statements, ITPs, NCRs, and as-built documentation. Perform site inspections and monitor contractor performance, workmanship, quality control, testing, and compliance with approved designs. Support PMC and project management teams through technical reporting, issue resolution, stakeholder coordination, and progress monitoring. <br><br><br>Qualifications<br><br>Requirements<br><br>Bachelor's Degree in Civil Engineering (Professional Engineering certification preferred). 9+ years of Civil Engineering experience. Minimum 3 years of airport, aviation, or airside infrastructure project experience preferred. Proven experience in:Airside civil works and aircraft pavements Airport roads and infrastructure Earthworks and grading Geotechnical investigations and boreholes Topographical surveys and GPR scanning Design review and construction supervision QA/QC, testing, inspections, and technical documentation<br><br> <br><br>Strong knowledge of airport standards including ICAO Annex 14, GACAR, FAA Advisory Circulars, ASTM, AASHTO, and Saudi Building Code. Proficiency in Auto CAD and Microsoft Office; BIM/CDE/EDMS experience is an advantage. Excellent technical, communication, and stakeholder management skills. Preferred Background<br><br>Experience in PMC, consultancy, or client-side supervision roles. Familiarity with working in operational airport environments, managing airside constraints, phased construction activities, and safety-critical infrastructure. What You'll Bring<br><br>Strong technical knowledge of airport civil infrastructure and pavement engineering. Ability to identify design, constructability, and operational risks early. Experience coordinating multidisciplinary engineering teams and contractors. Commitment to quality, safety, technical compliance, and successful project delivery.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Description <br></p><br><p>Lead QA/QC inspections for pressure vessels, tanks, and heat exchangers in Oil &amp; Gas or petrochemical projects, ensuring compliance with ASME, API, and Aramco standards; possess 10+ years industrial experience with 6 years in QA/QC and 4 years in Oil &amp; Gas;</p><br><br><p>certified CWI or CSWIP with ASNT Level II in NDT (UT, PT, MT, RT, VT); proficient in ASME, API, AWS, and relevant fabrication/inspection codes; review and approve WPS, PQRs, and welder qualifications; monitor NDT activities and personnel; </p><br><br><p>manage outsourced fabrication/inspection, coordinate with vendors and third-party inspectors; prepare ITPs, inspection reports, and final quality dossiers; </p><br><br><p>interface with clients for hold/witness points, DCL submissions, and testing;</p><br><br><p> handle NCRs, corrective actions, technical clarifications, and drive quality improvements.</p><br><br>Requirements <br><p><strong>Experience</strong>: Min. 10 Years</p><br><br><p><strong>Specialization</strong>: Manufacturing of pressure vessels, tanks, heat exchangers, Pipings</p><br><br><p><strong>Qualification</strong>: BE Mechanical, CSWIP 3.1 Certification</p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Job Purpose:Inspect and Monitor the Project site activities for compliance to the Quality Assurance / Quality Control standards including the provision of corrective and preventive action in order to ensure the consistent provision of quality and efficient service during all project activities.<br>Saudi Nationals only<br>Basic Academic Qualification: Bachelors’ Degree in [Mechanical / Electrical / Civil] Engineering.<br>Key Responsibilities:<br>PREPERATION OF PROJECT QUALITY DOCUMENTS – Develop quality documents prior to start the project construction activities in order to ensure utmost compliance to requirements of the project. MATERIAL RECEIVING INSPECTION – Conduct material receiving inspection to ensure all the project materials delivered to the site are as per material approvals and with the right quantity and good quality condition. PROJECT QUALITY MANAGEMENT – Conduct site QC surveillance in order to ensure that all site construction activities are carried out with the project requirements. WORK INSPECTION – Conduct installation inspection for all completed works in order to ensure the performed works are carried out with the project requirements.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Qualifications:</p><br><br><br><p>* Bachelor's degree in electrical engineering or mechanical engineering.</p><br><br><p>* Minimum2- 5 years of experience in Facilities Management, Operation &amp; Maintenance, or Building Projects.</p><br><br><p>* Proven experience in the handover of facilities/buildings from contractors and consultants.</p><br><br><p>* Hands-on experience in Testing &amp; Commissioning (T&amp;C) and witnessing commissioning activities.</p><br><br><p>* Strong knowledge of MEP systems (Electrical, HVAC, Plumbing, Fire Protection, ELV, and BMS).</p><br><br><p>* Experience in reviewing As-Built Drawings, O&amp;M Manuals, Warranties, Asset Registers, and Handover Documentation.</p><br><br><p>* Familiarity with international standards and best practices related to building commissioning and facilities management.</p><br><br><p>* Good communication skills .</p><br><br><br><p>Key Responsibilities:</p><br><br><br><p>* Lead the technical handover of university facilities from contractors and consultants.</p><br><br><p>* Attend, witness, and verify all Testing &amp; Commissioning (T&amp;C) activities for building systems.</p><br><br><p>* Review and verify all handover documents, including As-Built Drawings, O&amp;M Manuals, Warranties, Test Reports, and Asset Registers.</p><br><br><p>* Ensure all MEP systems are fully operational and compliant with project specifications before acceptance.</p><br><br><p>* Coordinate with contractors, consultants, and internal stakeholders to close all punch list items and outstanding defects.</p><br><br><p>* Support the transition of buildings from construction to operation and maintenance.</p><br><br><p>* Conduct technical inspections and recommend acceptance or rejection based on project requirements.</p><br><br><p>* Prepare handover status reports and monitor progress until final acceptance.</p><br><br><p>* Support the FM in establishing preventive maintenance requirements and asset data before operational handover.</p><br><br><br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Summary of the Role: The Planning Engineer will play a critical role in developing, monitoring, and updating project schedules to ensure timely and efficient project delivery.<br> This role requires strong analytical skills, attention to detail, and the ability to coordinate with multidisciplinary teams to manage progress, identify risks, and support decision-making across project phases.<br> Key Responsibilities: Develop and maintain detailed project schedules using industry-standard planning tools (e.<br>g., Primavera P6, MS Project).<br> Monitor project progress and performance against planned schedules.<br> Identify potential delays and risks, and propose mitigation strategies.<br> Coordinate with project teams, contractors, and stakeholders to gather accurate progress data.<br> Prepare regular reports including progress updates, schedule analysis, and forecasts.<br> Conduct critical path analysis and provide recommendations to optimize timelines.<br> Support project management in resource planning and allocation.<br> Ensure compliance with project requirements, standards, and contractual obligations.<br> Assist in evaluating variations, claims, and extensions of time (EOT).<br> Requirements: Bachelor’s degree in Engineering (Civil, Mechanical, or related field).<br> Minimum 15 years of experience in project planning and scheduling, preferably within construction or infrastructure projects.<br> Strong expertise in scheduling software such as Primavera P6 or equivalent.<br> Solid understanding of project controls, risk management, and construction workflows.<br> Excellent analytical, communication, and reporting skills.<br> Experience working on large-scale projects in the Middle East is an advantage.<br> Ability to work collaboratively in a fast-paced and dynamic environment.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Job Title: Asphalt Plant Electrical Engineer Department/Section: Asphalt Production Location: Qiddiya Direct Manager: Asphalt Plant Maintenance Manager Availability : Immediately ( Required )<br>Job Purpose:The Electrical Engineer is responsible for ensuring the safe, reliable, and efficient operation of all electrical, instrumentation, automation, and control systems associated with the asphalt plant and its supporting facilities. The role includes preventive, predictive, and corrective maintenance of electrical equipment, troubleshooting plant breakdowns, managing electrical projects, ensuring statutory compliance, and maintaining electrical infrastructure across the entire plant premises.<br>The Electrical Engineer shall ensure maximum plant availability while complying with electrical safety regulations and company maintenance standards.<br><br>Key Responsibilities:<br>Ensure safe, reliable, and uninterrupted operation of all electrical, instrumentation, and automation systems of the asphalt plant. Perform preventive, predictive, and corrective maintenance of electrical equipment to maximize plant availability. Diagnose and rectify electrical, PLC, VFD, instrumentation, and control system faults with minimum downtime. Maintain all plant electrical assets, including motors, MCCs, transformers, switchgear, generators, lighting, and distribution systems. Oversee electrical maintenance of all plant premises, including offices, workshops, warehouses, security cabins, utilities, and external lighting. Maintain and calibrate field instruments, sensors, load cells, temperature, pressure, and weighing systems. Execute planned shutdown maintenance, equipment installation, commissioning, and electrical modification projects. Monitor power consumption, power factor, electrical load distribution, and recommend energy saving initiatives. Ensure compliance with electrical safety standards, LOTO procedures, statutory regulations, and company HSE policies. Prepare and maintain electrical drawings, preventive maintenance schedules, equipment history, calibration records, and technical documentation. Manage electrical spare parts inventory, recommend stock levels, and support procurement activities. Support the installation, testing, commissioning, and successful start-up of new asphalt plant equipment, electrical systems, and automation controls, when required. Supervise electrical technicians and contractors, ensuring work quality, safety, and timely completion. Conduct root cause analysis of electrical failures and implements corrective and preventive actions. Support production teams by ensuring high equipment reliability and continuous plant operation. Participate in continuous improvement initiatives to enhance plant performance, reliability, and operational efficiency.<br>Qualifications <br>Diploma or bachelor’s degree in electrical engineering or equivalent.<br>Experience & Skills:Minimum 5+ years' experience in asphalt plant and road construction industry Working knowledge of plant operations. Familiarity with OSHA and other workplace safety regulations and precautions. Reporting and documentation skills/ Communication and coordination skills & Computer skills Analytical and problem-solving skills.

<div dir="rtl"><h3 >About the Role</h3> <p >كيلوج براون اند روت is seeking a <strong >Principal Structural Design Engineer - Offshore</strong> to lead the design, analysis, and integrity assessment of various offshore structures. This full-time role requires a minimum of 10 years of experience and involves ensuring compliance with Saudi Aramco Standards and international codes across all project phases.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead structural design and advanced engineering analysis for offshore platforms and subsea systems.</li> <li >Perform global and local analyses, including in-place, loadout, lifting, fatigue, strength, buckling, and earthquake analysis.</li> <li >Review and approve structural calculations, drawings, and project documentation.</li> <li >Ensure engineering deliverables meet technical requirements, manhour budgets, and schedules.</li> <li >Coordinate with multidisciplinary teams, including piping, instrumentation, mechanical, electrical, architectural, pipelines, and geotechnical engineers.</li> <li >Provide technical support during fabrication, installation, and offshore construction activities.</li> <li >Develop and implement structural integrity management strategies for brownfield assets.</li> <li >Review Saudi Aramco standards and design codes (API RP 2A/2SIM, ISO 19900 series, DNV-GL standards) and ensure compliance.</li> <li >Mentor junior engineers and review their work.</li> <li >Perform single and inter-discipline checks on drawings and documents.</li> </ul> <h3 >Required Qualifications</h3> <ul > <li >Bachelor’s or master’s degree in Civil/Structural Engineering.</li> <li >10+ years of offshore structural engineering experience.</li> <li >Strong knowledge of Saudi Aramco standards and offshore structural design codes (API, DNV, ISO).</li> <li >Proficiency in structural analysis tools such as SACS and *******</li> <li >Experience in FEED, detailed engineering, and brownfield modifications.</li> <li >Understanding of offshore construction and installation methods.</li> </ul> <h3 >Skills and Attributes</h3> <ul > <li >Strong communication skills.</li> <li >Demonstrated leadership abilities.</li> <li >Excellent technical report-writing skills.</li> <li >Ability to work independently and manage multiple assignments effectively.</li> </ul></div>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تعلن شركة تسهيل للتقييم عن حاجتها لتوظيف <strong >فني ميكانيكي مركبات</strong> للانضمام إلى فريقها في مدينة القطيف، ضمن المنطقة الشرقية. يمثل هذا الدور فرصة لمتخصص ذي خبرة في متابعة الجوانب الميكانيكية للمركبات، بدءًا من تركيبها وحتى تشخيص أعطالها وإصلاحها. يتطلب الدور التزامًا بالعمل بدوام كامل، وخبرة عملية تتراوح بين <strong >2 إلى 5 سنوات</strong> في مجال صيانة المركبات الميكانيكية أو مجال ذي صلة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >متابعة تركيب المركبات الميكانيكية والإشراف على إجراءات تشغيلها.</li> <li >تحديد القطع التبديلية اللازمة، ومطابقة مواصفاتها الفنية، والعمل على تأمينها.</li> <li >تنفيذ إجراءات استلام المركبات الميكانيكية المخصصة للخدمة والصيانة.</li> <li >فحص وتشخيص الأعطال الفنية في المركبات ومتابعة عمليات إصلاحها.</li> <li >الالتزام بسياسات وإجراءات الصحة والسلامة والبيئة المعتمدة.</li> </ul> <h3 >المؤهلات والخبرات</h3> <ul > <li >خبرة عملية لا تقل عن <strong >سنتين وتصل إلى 5 سنوات</strong> في مجال ميكانيكا المركبات.</li> <li >فهم عميق لأنظمة المركبات الميكانيكية المختلفة، بما في ذلك المحركات وناقلات الحركة والأنظمة الهيدروليكية.</li> <li >القدرة على استخدام أدوات التشخيص المتخصصة لتحديد الأعطال بدقة.</li> <li >مهارات جيدة في حل المشكلات والتعامل مع التحديات الفنية.</li> <li >الالتزام بمعايير الجودة والسلامة المهنية في جميع مراحل العمل.</li> </ul> <h3 >تفاصيل العمل</h3> <p >هذا الدور هو وظيفة <strong >بدوام كامل</strong> ويقع مقرها في مدينة القطيف بالمنطقة الشرقية. سيعمل الفني ضمن فريق متخصص يهدف إلى ضمان كفاءة وسلامة المركبات الميكانيكية، والمساهمة في تقديم خدمات عالية الجودة.</p> <h3 >الالتزام بالمعايير المهنية</h3> <p >يُعد الالتزام الصارم بسياسات وإجراءات الصحة والسلامة والبيئة جزءًا أساسيًا من هذا الدور. يتوقع من الفني تطبيق هذه المعايير بفعالية لضمان بيئة عمل آمنة، والحفاظ على جودة الخدمات المقدمة، والامتثال للوائح المحلية والدولية ذات الصلة.</p> <h3 >التقديم</h3> <p >ندعو الكفاءات المؤهلة وذوي الخبرة المطلوبة للتقديم على هذه الفرصة للانضمام إلى فريق عمل شركة تسهيل للتقييم في القطيف.</p></div>

Job Summary The role is responsible for overseeing the operation, maintenance, and optimization of HVAC systems within facilities, ensuring reliability, energy efficiency, and compliance with safety and regulatory standards. The position plays a critical part in managing technical teams, driving preventive and corrective maintenance strategies, and supporting continuous improvement initiatives across assets.<br>Key Responsibilities Lead the planning and execution of preventive and corrective maintenance for HVAC systems, including chillers, AHUs, FCUs, cooling towers, ventilation, and control systems Ensure all HVAC equipment operates efficiently, minimizing downtime and extending asset lifecycle Supervise and guide maintenance teams, subcontractors, and service providers to meet performance and SLA requirements Diagnose complex HVAC issues and implement effective technical solutions in a timely manner Monitor system performance through BMS/CMMS and recommend improvements for energy efficiency and cost optimization Ensure compliance with health, safety, and environmental standards and regulatory requirements Prepare maintenance plans, schedules, and resource allocation strategies Conduct inspections, audits, and condition assessments of HVAC systems Support project teams in the installation, testing, and commissioning of new HVAC systems or upgrades Maintain accurate documentation, reports, and asset records Manage spare parts inventory and ensure availability of critical components Provide technical training and mentorship to team members Liaise with clients and stakeholders to ensure service excellence and satisfaction<br>Tools & Methods, HSEQAbide by the Health, Safety, Environmental and Quality, (HSEQ) policy, procedures necessary for the good conduct and safety of the workplace. It is a requirement and moral obligation of each employee to be actively committed and accountable to the compliance of Enova’s HSEQ policy, operating procedures, as well as being compliant to local legislation. The Employee shall seek clarification and guidance in specific cases or whenever one feels necessary.<br>Customer Relations Develop a pro-active working relationship with all authorities and assist in establishing areas for service improvement.<br>Minimum Qualifications Bachelor’s degree in Mechanical Engineering or a related field.<br>Minimum Experience8 years of experience in HVAC systems within facilities management or a similar environment.<br>Job Specific Skills Strong technical knowledge of HVAC systems, including chilled water systems and air distribution networks Expertise in troubleshooting and fault diagnosis Familiarity with Building Management Systems (BMS) and Computerized Maintenance Management Systems (CMMS) Knowledge of energy management and sustainability practices Understanding of international codes and standards related to HVAC systems Strong leadership and team management abilities Effective communication and stakeholder management skills Ability to work under pressure and manage multiple priorities Proficiency in technical reporting and documentation Commitment to safety, quality, and continuous improvement

Job Summary We are seeking a detail-oriented QA/QC Engineer to ensure that construction and engineering projects comply with quality standards, project specifications, and regulatory requirements. The ideal candidate will oversee inspections, maintain quality documentation, implement quality management procedures, and support continuous improvement initiatives throughout the project lifecycle. Key Responsibilities Implement and maintain the project's Quality Assurance and Quality Control (QA/QC) procedures. Conduct inspections and monitor construction activities to ensure compliance with project specifications, drawings, and applicable standards. Prepare, review, and maintain quality documentation, including Inspection and Test Plans (ITPs), method statements, checklists, and quality reports. Identify non-conformities (NCRs), investigate root causes, and follow up on corrective and preventive actions (CAPA). Coordinate with project managers, consultants, subcontractors, and site teams to ensure quality requirements are achieved. Ensure compliance with ISO standards, company quality policies, and client requirements. Monitor material inspections, testing activities, and quality records. Participate in internal and external quality audits. Prepare periodic quality reports and provide recommendations for process improvements. Promote a culture of quality, safety, and continuous improvement across project teams. Qualifications Bachelor's degree in Civil Engineering, Mechanical Engineering, or a related engineering discipline.3–5 years of experience in QA/QC within construction or engineering projects. Strong knowledge of ISO standards and Quality Management Systems (QMS). Experience in quality inspections, documentation, reporting, and compliance monitoring. Familiarity with construction codes, engineering standards, and quality control procedures. Proficiency in Microsoft Office and quality documentation systems. Bilingual proficiency in Arabic and English is preferred. Required Skills Strong understanding of QA/QC principles and quality management systems. Excellent inspection, documentation, and reporting skills. Strong analytical and problem-solving abilities. Excellent communication and interpersonal skills. High attention to detail and organizational skills. Ability to work collaboratively with multidisciplinary teams. Strong time management skills and the ability to manage multiple priorities. Commitment to maintaining high-quality standards and continuous improvement.

<h3 >About the Opportunity</h3> <p >WSP in the Middle East is seeking a <strong >Senior Quality Engineer</strong> to join our team in Jeddah, Makkah, Saudi Arabia. This is a full-time position for a professional with 5-10 years of experience in quality assurance and control within the engineering and construction sector.</p> <h3 >Role Overview</h3> <p >The Senior Quality Engineer will be responsible for maintaining daily records of site activities and documenting all quality observations. This role is critical in ensuring that contractors comply with project specifications, managing and evaluating processes for efficient quality control, and providing essential support to the construction team and Quality Control Specialists. The incumbent will ensure all work consistently adheres to contract requirements.</p> <h3 >Core Responsibilities</h3> <ul > <li >Review and check vendors' prequalifications, Method Statements, Inspection Test Plans (ITP), equipment data, material samples, and/or manufacturers for compliance with contract drawings, specifications, and the project’s quality system.</li> <li >Ensure all requirements of applicable specifications and drawings are met and report on deficiency corrections on-site.</li> <li >Establish and maintain robust procedures to develop standard documentation for the project’s quality control and assurance, and propose any necessary improvements.</li> <li >Implement QA procedures and coordinate QC work with other technical disciplines to ensure safe and seamless management across all trades and activities.</li> <li >Coordinate testing and inspection of offsite materials storage and testing.</li> <li >Inspect all materials for compliance with submittals and drawings.</li> <li >Monitor the performance of all control activities and tests on building components.</li> <li >Direct, supervise, and coordinate inspection/engineering QC activities.</li> </ul> <h3 >Quality Assurance and Problem Resolution</h3> <ul > <li >Plan and execute regular inspections and audits to verify compliance with quality standards and specifications.</li> <li >Troubleshoot and resolve problems related to activity quality control.</li> <li >Identify non-conformances, lead investigations with relevant departments, and evaluate contractors' submitted corrective &amp; preventive action plans.</li> <li >Participate in the development of the Commissioning plan, roles, and responsibilities, and implement the commissioning plan.</li> </ul> <h3 >Reporting and Inter-Departmental Coordination</h3> <ul > <li >Participate in and conduct Quality meetings with the contractor, Construction team, and suppliers.</li> <li >Coordinate with the Engineering team to resolve all construction issues, RFIs, and conflicts.</li> <li >Review, assist, and facilitate the Daily Report process; keep an updated daily report; prepare and submit weekly and monthly quality reports.</li> <li >Maintain up-to-date knowledge on various architecture engineering processes &amp; techniques and coordinate with other departments for the technical activities of projects.</li> </ul> <h3 >Candidate Profile</h3> <p >The ideal candidate will possess <strong >5 to 10 years of experience</strong> in quality engineering or a related field, demonstrating a strong background in implementing and overseeing quality control and assurance procedures. A comprehensive understanding of project specifications, construction processes, and regulatory compliance is essential for success in this role.</p>

<h3 >About the Opportunity</h3> <p >Wood (KSA) is seeking a <strong >TPE IV/Senior Site Structural Engineer</strong> to join its projects business. This full-time role is based in Al Khobar and involves contributing to the development of a new gold mine and processing facility located at a remote site in Saudi Arabia. The position requires a professional with over <strong >10 years of experience</strong> in structural engineering within site-based project environments.</p> <h3 >About Wood</h3> <p >Wood is a global leader in consulting, engineering, and operations, serving clients across the energy and materials sectors. With 33,000 professionals in approximately 50 countries, the company supports clients throughout the full asset lifecycle. Wood is committed to delivering safe, predictable outcomes, enabling resilient operations, and contributing to a lower carbon future, while striving for net zero through advanced facilities and efficient project delivery worldwide.</p> <h3 >Key Responsibilities</h3> <ul > <li >Manage structural and infrastructure works, including various building construction types, building design, equipment foundation design, and pipe and cable tray support design.</li> <li >Originate new engineering deliverables and revise existing ones.</li> <li >Review and check engineering deliverables to ensure compliance with company procedures, standards, and checklists.</li> <li >Supervise engineering work performed by junior team members.</li> <li >Participate in and conduct job-related training as required.</li> <li >Plan and complete work effectively within allocated man-hours, ensuring timely delivery.</li> <li >Interface, coordinate, and communicate effectively with the Project Manager and other team members.</li> <li >Delegate and distribute work, and manage the billability of the team.</li> <li >Coordinate with all relevant disciplines in the preparation and development of deliverables, ensuring the incorporation of other disciplines' input.</li> <li >Conduct site visits to verify conditions and perform markup drawings or as-built activities.</li> <li >Manage the submission of deliverables, including required quality checks and proper record management.</li> <li >Prepare technical reports and presentations.</li> <li >Conduct technical bid evaluations, vendor document reviews, and subcontract scope management.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Over <strong >10 years of proven field engineering experience</strong> in site-based or project environments.</li> <li >Strong understanding of engineering, construction, and field operations within industrial or mining projects.</li> <li >Full knowledge of Aramco, Sabic, Royal Commission, SBC, and HCIS standards.</li> </ul> <h3 >Work Environment and Project Scope</h3> <p >This role is integral to the development of a new gold mine and processing facility, requiring a strong presence at a remote site in Saudi Arabia. The Senior Site Structural Engineer will operate within a dynamic project environment, focusing on industrial and mining sector challenges. The position demands practical field engineering experience and a comprehensive understanding of site-based operations.</p> <h3 >Application</h3> <p >Candidates meeting the specified qualifications are encouraged to apply.</p>

<p><b >Responsibilities</b></p><ul><li>Conduct QA/QC inspections and surveillance activities across assigned construction works.</li><li>Verify that construction activities comply with approved drawings, project specifications, contractual requirements, method statements, procedures, and applicable quality standards.</li><li>Perform FOK, installation, PUE, and other required project quality inspections.</li><li>Review and monitor contractor Inspection &amp; Test Plans (ITPs) , checklists, inspection requests, and supporting quality records.</li><li>Witness inspections and testing activities in accordance with approved ITPs.</li><li>Identify non-conforming work and support the preparation and issuance of Non-Conformance Reports (NCRs) .</li><li>Monitor NCRs through corrective action and closure and escalate unresolved or recurring quality issues to the QA/QC Manager.</li><li>Support root cause analysis and implementation of corrective and preventive actions.</li><li>Monitor workmanship, materials, installations, and construction activities for compliance with project requirements.</li><li>Coordinate with contractors, consultants, vendors, discipline engineers, and project teams to resolve quality-related issues.</li><li>Review material inspection requests, work inspection requests, test records, certificates, and related quality documentation.</li><li>Maintain accurate inspection records, quality reports, NCR logs, punch lists, and supporting evidence.</li><li>Support internal and external quality audits and surveillance activities.</li><li>Identify recurring quality issues, trends, and areas of concern and report them to the QA/QC Manager.</li><li>Assist in preparing quality KPIs, reports, dashboards, and project quality statistics.</li><li>Support testing, commissioning, punch-list closeout, handover, and final quality documentation.</li><li>Verify completion and availability of quality records required for system and project handover.</li><li>Promote compliance with the Project Quality Management Plan and contribute to continuous improvement initiatives.</li><li>Support implementation of the Project Quality Management System across assigned work packages.</li></ul><p>Qualifications</p><p>Required Qualifications</p><ul><li>Bachelor s degree in Civil, Mechanical, Electrical Engineering , or a related engineering discipline.</li><li>Relevant QA/QC engineering experience on construction, infrastructure, EPC, PMC, or major capital projects.</li><li>Hands-on experience with site inspections, ITPs, inspection requests, quality documentation, and NCR management.</li><li>Good understanding of ISO 9001 Quality Management Systems .</li><li>Experience reviewing construction activities against approved drawings, specifications, method statements, and project quality requirements.</li><li>Experience identifying non-conformances and following corrective actions through closure.</li><li>Knowledge of root cause analysis and corrective/preventive action processes.</li><li>Strong documentation, reporting, and record-management skills.</li><li>Ability to coordinate effectively with contractors, consultants, vendors, and multidisciplinary project teams.</li><li>Strong communication, attention to detail, and problem-solving skills.</li><li>Proficiency in Microsoft Office.</li></ul><p>Preferred Qualifications</p><ul><li>Experience on hyperscale data center or mission-critical projects .</li><li>Previous experience within a PMC, consultant, EPC, or major contractor environment.</li><li>ISO 9001 Internal Auditor, Lead Auditor, Certified Quality Engineer (CQE), or equivalent quality certification.</li><li>Familiarity with electronic Quality Management Systems and document control platforms.</li><li>Experience supporting commissioning quality activities and handover documentation.</li><li>Knowledge of international construction quality standards and best practices.</li><li>Familiarity with FIDIC contracts and associated QA/QC requirements.</li><li>Experience preparing quality reports, dashboards, NCR statistics, and quality performance metrics.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Civil, Mechanical, Electrical Engineering , or a related engineering discipline.</li><li>Relevant QA/QC engineering experience on construction, infrastructure, EPC, PMC, or major capital projects.</li><li>Hands-on experience with site inspections, ITPs, inspection requests, quality documentation, and NCR management.</li><li>Good understanding of ISO 9001 Quality Management Systems .</li><li>Experience reviewing construction activities against approved drawings, specifications, method statements, and project quality requirements.</li><li>Experience identifying non-conformances and following corrective actions through closure.</li><li>Knowledge of root cause analysis and corrective/preventive action processes.</li><li>Strong documentation, reporting, and record-management skills.</li><li>Ability to coordinate effectively with contractors, consultants, vendors, and multidisciplinary project teams.</li><li>Strong communication, attention to detail, and problem-solving skills.</li><li>Proficiency in Microsoft Office.</li></ul><p>Preferred Qualifications</p><ul><li>Experience on hyperscale data center or mission-critical projects .</li><li>Previous experience within a PMC, consultant, EPC, or major contractor environment.</li><li>ISO 9001 Internal Auditor, Lead Auditor, Certified Quality Engineer (CQE), or equivalent quality certification.</li><li>Familiarity with electronic Quality Management Systems and document control platforms.</li><li>Experience supporting commissioning quality activities and handover documentation.</li><li>Knowledge of international construction quality standards and best practices.</li><li>Familiarity with FIDIC contracts and associated QA/QC requirements.</li><li>Experience preparing quality reports, dashboards, NCR statistics, and quality performance metrics.</li></ul>

<p>Hyperscale Cooling Architecture Ownership Define and validate cooling reference architectures for Hyperscale Campuses AI/GPU Clusters Select and justify air vs Liquid Vs hybrid cooling strategy Chilled water vs direct expansion vs free cooling (where realistically possible)Ensure scalability, modularity, and future density headroom are built in from Day .Demonstrate strong customer facing, communication, and influencing skills to support technical credibility and customer confidence. Be connected with SE Line of Businesses and be up to date on the last technical evolutions of equipment/ systems to leverage it to the benefit of customer future technical solutions Tender Support &amp; Upstream Alignment Actively contribute to tender and pre tender phases, ensuring the proposed cooling designs are technically sound, competitive, and executable. Define and validate technical architectures, design assumptions, and compliance matrices. Ensure consistency between tender commitments and executable project design. Technical Design Authority Lead and approve basic and detailed cooling designs in line with customer requirements and SE standards. Ensure coherence, robustness, and compliance of all design deliverables across projects and regions.Mastery of Airflow management &amp; containment, Chilled water and DX systems, Liquid cooling architectures. Ability to Read and challenge mechanical designs, P&amp;IDs, layouts, Detect over-engineering and under-engineering instantly. Understanding of Cooling impact on electrical systems (UPS, generators) Optimize PUE, WUE support customer on sustainability commitments and Align solutions with Schneider-Electric decarbonization and EcoStruxure strategy Stakeholder &amp; Supplier Coordination Train presales, sales, project teams, contractor and EU on: - Hyperscale cooling limit - AI thermal constraints and new technology - Middle East specific failure modes - Act as technical escalation point for the region. - Mentor engineers and influence product roadmap based on regional needs. Design Scope &amp; Lifecycle Coverage Act as Schneider s final Cooling technical voice in: - Hyperscale technical workshops - Consultant design reviews - EPC value-engineering sessions - Support mega RFPs and defend Schneider s position in technical clarifications. - Identify design risks early -Support FAT/SAT and commissioning for critical projects. Standards, Compliance &amp; Risk Management - Ensure designs comply with ASHRAE Standard , uptime Institute Guideline, Local regulation and Utilities Constraints Identify technical risks, design deviations, and change impacts versus contract or approved baseline. -Support PMs and Execution TLs in technical assessments of changes and variation orders. -Capture lessons learned and drive standardization and continuous improvement across accounts.</p><p><strong>Desired Candidate Profile</strong></p><p>Master's degree in engineering mechanical (HVAC).</p><p>Fluent English and Arabic . Other languages are a plus.</p><p>7 years in data center cooling or mission-critical infrastructure</p><p>Technical experience in the Hyperscale and large collocation Data Center,</p><p>Technical experience in AI Data center infrastructure area plus</p><p>Technical experience in Cooling design and Equipment Chiller, FWU, CRAH, CRAC, CDU</p><p>Ability to lead with agility in a complex &amp; matrix environment.</p><p>Ability to communicate (written, verbal) clearly in a concise and synthetic manner on complex technical strategy.</p><p>Ability to convince stakeholders on the proper project technical strategy</p><p>Ability to learn from others, share her/his knowledge, coach others and collaborate efficiently.</p><p>Ability to read and understand applicable standards'</p>