Heavy equipment mechanical engineer Jobs

SECTION I: Job Summary <br><br>The QC Inspector - Coating performs inspection and testing of surface preparation and protective coating/painting activities to verify compliance with drawings, specifications, and applicable standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on surface preparation and coating/painting works Verify surface preparation (blasting profile, cleanliness) against specifications (e.g., SSPC/NACE standards) Witness coating application, DFT/WFT checks, holiday testing, and adhesion tests per the ITP Verify environmental conditions (humidity, dew point, temperature) prior to coating application Verify materials and batch certificates against approved coating specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment (gauges, holiday detectors) used on site Support punch-list generation and verification of closure for coating works Support preparation of quality documentation for coating handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Coating/Painting Inspection Techniques Surface Preparation Standards (SSPC/NACE) DFT/WFT, Holiday & Adhesion Testing Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on coating/painting application projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical/Civil Engineering NACE/coating inspection certification (e.g., NACE Level II) preferred

SECTION I: Job Summary <br><br>The QC Inspector - Fireproofing performs inspection and testing of passive fireproofing application activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on fireproofing application works Verify surface preparation, primer, and fireproofing material application against specifications Witness thickness (DFT/WFT) checks and adhesion tests per the ITP Verify materials and batch certificates against approved specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment (thickness gauges) used on site Support punch-list generation and verification of closure for fireproofing works Ensure work fronts comply with approved method statements and fireproofing standards Support preparation of quality documentation for fireproofing handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Fireproofing/Passive Fire Protection Inspection Techniques Surface Preparation & Coating Application Standards Thickness (DFT/WFT) & Adhesion Testing Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on fireproofing/coating application projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical/Civil Engineering NACE/coating inspection certification preferred

<p>POSITION SUMMARY Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of the mechanical plant. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gauges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance. Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Reach overhead and below the knees. Move in confined or elevated spaces. Move over sloping, uneven, or slippery surfaces. Move up and down stairs, service ramps and/or a ladder. Grasp, turn, and manipulate objects of varying size and weight. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: Technical, Trade, or Vocational School Degree.</p><p>Related Work Experience: At least 3 years of related work experience.</p><p>Supervisory Experience: No supervisory experience.</p><p>License or Certification: EPA Universal Certification Driver's License HVAC Certification</p>

<p>Purpose Define the responsibilities, authority, and accountability of the Site Manager for successful execution of Data Center projects from installation through integrated systems testing, operational readiness, handover, and warranty support. Scope Covers all site activities related to Electrical, Mechanical, ELV, ICT, Security, BMS, EPMS, SCADA, Fire Alarm, Fire Suppression, Controls, Commissioning, Integrated Systems Testing (IST), and client handover.</p><p>Main Responsibilities</p><ul><li>Provide overall leadership for all site construction, installation, testing, commissioning and handover activities.</li><li>Ensure delivery within budget, schedule, quality, contractual and performance requirements.</li><li>Manage site teams, commissioning teams, supervisors, subcontractors and vendors.</li><li>Act as primary site representative toward client, consultant and authorities.</li><li>Report project performance, risks, schedule recovery plans and commissioning status to the Project Manager and Site Works Regional Leader.</li></ul><p>Safety, Health &amp; Environmental (HSE) Responsibilities</p><ul><li>Promote a zero-harm safety culture across the project site.</li><li>Ensure compliance with company HSE policies, local regulations, client requirements and international standards.</li><li>Lead toolbox talks, safety walks, hazard identification and risk mitigation activities.</li><li>Verify Permit-to-Work implementation, LOTO procedures, energized work controls and confined-space requirements.</li><li>Investigate incidents, near misses and unsafe conditions and implement corrective actions.</li><li>Ensure environmental compliance including waste management, spill prevention, pollution control, energy efficiency and environmental reporting.</li><li>Coordinate emergency response drills and ensure site emergency preparedness.</li></ul><p>General L1-L2 Installation Management</p><ul><li>Oversee FAT follow-up, equipment delivery, storage, preservation and installation readiness.</li><li>Coordinate installation of MV/LV systems, UPS, generators, transformers, STS, RPPs, busways, cooling systems, fuel systems and data hall infrastructure.</li><li>Ensure quality inspections, punch-list management and construction completion requirements.</li></ul><p>L3 Pre-Functional Testing</p><ul><li>Control equipment startup, calibration, loop checks, point-to-point verification and functional testing.</li><li>Ensure all pre-functional checklists and test records are completed prior to integrated testing.</li></ul><p>L4 Integrated Systems Testing (IST) Responsibilities</p><ul><li>Lead and coordinate all Level 4 Integrated Systems Testing activities.</li><li>Validate complete Sequence of Operations (SOO) for all critical systems.</li><li>Manage integrated testing between Electrical, Mechanical, BMS, EPMS, Fire Alarm, Security and Network systems.</li><li>Lead failover testing, redundancy testing, utility loss scenarios, generator transitions, UPS battery autonomy tests and cooling failure scenarios.</li><li>Coordinate client witnesses, consultants, OEM representatives and commissioning agents during testing.</li><li>Manage deficiency tracking, issue resolution and retest activities.</li><li>Ensure all L4 test scripts, reports and signoffs are completed and approved.</li></ul><p>L5 Performance Testing &amp; Operational Readiness</p><ul><li>Lead Level 5 testing and operational validation activities.</li><li>Manage full-load and partial-load testing, load bank operations and reliability demonstrations.</li><li>Oversee black building tests, endurance testing, integrated emergency response testing and mission-critical failure simulations.</li><li>Validate Tier requirements, resilience objectives and operational performance criteria where applicable.</li><li>Ensure operations team training, knowledge transfer and readiness assessments are completed.</li><li>Confirm all systems operate reliably under normal, degraded and emergency conditions before handover.</li><li>Obtain final client acceptance and operational readiness certification.</li></ul><p>General Documentation, Claims &amp; Reporting</p><ul><li>Maintain commissioning matrix, event tracker, risk register and issue logs.</li><li>Document all delayed activities, disrupted testing and resource impacts for claim support.</li><li>Record all L4 and L5 testing durations, client-caused delays and additional resource requirements beyond contractual allowances.</li><li>Ensure turnover packages, O&amp;M manuals, as-built drawings and training records are complete.</li><li>Provide weekly and monthly reports to the Project Manager and Site Works Regional Leader covering safety, quality, schedule, commercial risks, commissioning progress and client satisfaction.</li></ul><p>Level of education required (Mandatory schooling, Vocational education, SGCP /Opsialized school, Undergraduate, University degree, PhD)</p><p>Team management Flexibility &amp; Reliability, Focus on technical details &amp; Customer focus, Team player</p><p>Ability to communicate (written, verbal) in clear and synthetic manner on technical issues/topics.</p><p>Good Software tools literacy: MS Office (MS Project), Acrobat, AutoCAD, Outlook, Testing device software(Omicron), Protection Relays Setting software</p><p>Advanced Knowledge of Medium voltage/Low voltage equipment, Power stations and principles, The latest technologies and commissioning test principles</p><p>Confirmed experience or litteracy with any of Schneider Equipment for MV (Premset, MCSET, PIX), Protection Relays (SEPAM, Micom, Easergy), UPS APC Symmetra and LV Distribution panels(Blokset, Okken, Prisma) is advantage</p><p>Experience - Total number of years of professional experience necessary prior to the job entry</p><p>10 years minimum as a Site Supervisor / Commissioning Supervisor</p><p>Baccalaureate + 2 years of study of Electrical Engineering qualification</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Team management</li><li>Flexibility &amp; Reliability</li><li>Focus on technical details &amp; Customer focus</li><li>Team player</li><li>Ability to communicate (written, verbal) in clear and synthetic manner on technical issues/topics.</li><li>Good Software tools literacy: MS Office (MS Project), Acrobat, AutoCAD, Outlook, Testing device software(Omicron), Protection Relays Setting software</li><li>Advanced Knowledge of Medium voltage/Low voltage equipment, Power stations and principles, The latest technologies and commissioning test principles</li><li>Confirmed experience or litteracy with any of Schneider Equipment for MV (Premset, MCSET, PIX), Protection Relays (SEPAM, Micom, Easergy), UPS APC Symmetra and LV Distribution panels(Blokset, Okken, Prisma) is advantage</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D equivalent.<br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br>Experience in hotel engineering or maintenance a plus.<br>Supervisory Experience: No supervisory experience.&nbsp;<br>REQUIRED QUALIFICATIONS<br>License or Certification: Driver’s License<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At more than 100 award-winning properties worldwide, The Ritz-Carlton Ladies and Gentlemen create experiences so exceptional that long after a guest stays with us, the experience stays with them. Attracting the world’s top hospitality professionals who curate lifelong memories, we believe that everyone succeeds when they are empowered to be creative, thoughtful and compassionate. <br>Every day, we set the standard for rare and special luxury service the world over and pride ourselves on delivering excellence in the care and comfort of our guests.<br>Your role will be to ensure that the “Gold Standards” of The Ritz-Carlton are delivered graciously and thoughtfully every day. The Gold Standards are the foundation of The Ritz-Carlton and are what guides us each day to be better than the next. It is this foundation and our belief that our culture drives success by which The Ritz Carlton has earned the reputation as a global brand leader in luxury hospitality. As part of our team, you will learn and exemplify the Gold Standards, such as our Employee Promise, Credo and our Service Values. And our promise to you is that we offer the chance to be proud of the work you do and who you work with.<br>In joining The Ritz-Carlton, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

In a world of possibilities, pursue one with endless opportunities. Imagine Next!<p> </p>At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.<p> </p> <p> </p> <p> <u> <b>Job Description:</b> </u> </p> <p>**Join a Landmark Giga-Project Shaping the Future of Saudi Arabia**</p> <p> </p> <p>Our client is delivering one of the Kingdom s most ambitious and high-profile giga-projects, set to redefine global standards in destination development, innovation, and visitor experience. As part of the integrated Delivery Partner team, you will play a key role in planning, designing, and implementing world-class assets and infrastructure that support the Kingdom s Vision 2030.</p> <p> </p> <p>This is a unique opportunity to contribute to a pioneering program at scale, working alongside industry-leading experts, cutting-edge technologies, and diverse stakeholders. If you are driven by challenge, motivated by impact, and eager to be part of a legacy project that will influence generations to come, we invite you to consider joining this transformative journey.</p> <p> </p> <p>The <b>Director Waste Management</b> is the ultimate technical, financial, and lifecycle authority responsible for the strategic governance of a massive, next-generation solid waste infrastructure portfolio spanning a multi-district smart city footprint.</p> <p>With a mandate requiring over 20 years of distinguished experience, this executive leader ensures that advanced waste assets including city-wide automated vacuum waste collection (AVAC) pneumatic networks, smart sorting hubs, material recovery facilities (MRFs), and automated bin systems are managed as a sustainable, data-driven capital portfolio. Operating at the intersection of urban asset management and Saudi Arabia's Vision 2030 sustainability pillars, this role focuses on maximizing Total Cost of Ownership (TCO), driving automated cross-charge cost recovery models, enforcing data integrity inside the central asset registry, and managing the multi-decade capital replacement lifecycle in an extreme desert climate.</p> <div> </div> <p> <b>Key Responsibilities</b> </p> <p> <b>1. Capital Planning &amp; Asset Lifecycle Strategy (LCP)</b> </p> <ul> <li>Formulate and continuously update the 10-to-30-year <b>Capital Asset Replacement Plan (CARP)</b> for all solid waste and municipal cleansing infrastructure city-wide.</li> <li>Drive advanced asset degradation modeling and predictive performance matrices tailored to the intense heat, dust, pneumatic wear, and heavy-use profiles of the region's waste assets.</li> <li>Conduct rigorous Total Cost of Ownership (TCO) and financial trade-off analyses to optimize capital expenditure versus operational maintenance (CAPEX vs. OPEX) for large-scale waste machinery and automated networks.</li> <li>Partner directly with the Service Charge Director to establish accurate, audited long-term infrastructure sinking funds paid for by commercial entities, mega-entertainment districts, and residential neighborhoods.</li> </ul> <p> <b>2. Digital System Integration &amp; Smart Grid Governance</b> </p> <ul> <li>Establish and enforce the master asset data hierarchy, naming conventions, and structural classifications for all solid waste infrastructure within the enterprise framework.</li> <li>Partner with the SAP-EAMS Director to ensure that automated flow telemetry, mechanical runtime metrics, sensor data, and maintenance histories are flawlessly captured in the central <b>SAP Enterprise Asset Management</b> database.</li> <li>Oversee the deployment and configuration of smart-city infrastructure technology, including IoT-enabled bin sensor networks, pneumatic pressure tracking arrays, and integrated fleet telemetry systems inside the unified asset management platform.</li> </ul> <p> <b>3. Financial Cross-Charging &amp; Vendor Performance Governance</b> </p> <ul> <li>Translate raw automated waste-volume and weight-tracking database metrics into equitable cost-allocation and financial cross-charging models for corporate finance teams.</li> <li>Deliver audited waste-generation data frameworks to the Service Charge Director to enable automated utility billing and cost recovery across international commercial partners, theme parks, hospitality hubs, and distinct sub-developments.</li> <li>Design and enforce strict technical Key Performance Indicators (KPIs) and data-logging compliance protocols for Tier-1 external Operations &amp; Maintenance (O&amp;M) contractors and specialized waste management vendors.</li> <li>Lead independent operational and technical audits on waste infrastructure to verify that contract partners are completing preventative maintenance according to <b>ISO 55001 standards</b>.</li> </ul> <p> <b>4. Stage-Gate Assurance &amp; Asset "Vesting" Handover</b> </p> <ul> <li>Act as the final technical sign-off authority on the Stage-Gate Handover Committee for all solid waste capital projects transitioning from construction contractors into live operations.</li> <li>Oversee the "Digital Vesting" process for waste networks, verifying that all technical manuals, structural as-built documentation, pneumatic safety certifications, and warranty tracking sheets are successfully integrated into the asset platform before formal operational sign-off.</li> </ul> <div> </div> <p> <b>Job Requirements &amp; Qualifications</b> </p> <p> <b>Education &amp; Professional Credentials</b> </p> <ul> <li> <b>Bachelor s Degree</b> in Environmental Engineering, Civil Engineering, Mechanical Engineering, or a highly relevant quantitative technical asset management discipline from an accredited institution.</li> <li> <b>Master s Degree</b> in Engineering Management, Asset Management, Sustainable Infrastructure, or an MBA from a globally recognized institution is highly preferred.</li> <li> <b>Professional Certifications:</b> Mandatory possession of senior professional credentials, such as Certified Asset Management Assessor (<b>CAMA</b>), Institute of Asset Management (<b>IAM</b>) Diploma, Chartered Waste Manager, or Chartered/Professional Engineer (<b>CEng / PE</b>).</li> </ul> <p><br></p>

We are looking for an experienced Manager – Data Center to lead and grow our Data Center EPC business. The role will be responsible for driving business growth, supporting new opportunities and bids, providing technical leadership, and ensuring successful project delivery.<br>Ideal Candidate We are looking for a business-oriented Data Center leader, not only a project execution professional. The ideal candidate should be able to combine technical expertise, EPC/bidding experience, commercial understanding, client management and team leadership to grow and deliver Data Center projects successfully.<br>Key Responsibilities Lead the Data Center EPC business line, including strategy, growth plans and business targets. Identify and develop new business opportunities and build strong relationships with clients, OEMs, technology vendors, consultants and delivery partners. Coordinate with Sales, Bidding and Technical teams throughout the opportunity and tendering process. Participate in client meetings, technical presentations and negotiations to support new project awards. Review and approve technical solutions covering power, cooling, BMS/DCIM, ICT/ELV and control systems. Conduct technical due diligence, feasibility assessments and constructability reviews during pre-bid stages. Develop and maintain standardized technical specifications, design templates and best practices. Review BOQs, material specifications and technical submittals for compliance and accuracy. Support tendering, estimation, value engineering, vendor evaluation and equipment selection. Provide technical and commercial support for contract scope, risks, assumptions and exclusions. Support project execution to ensure delivery within budget, schedule, quality and safety requirements. Ensure quality and commissioning requirements are properly incorporated into project delivery. Coordinate with Electrical, Mechanical, Civil/Structural and IT Infrastructure teams for integrated Data Center solutions. Lead, mentor and develop the Data Center technical team.<br>Requirements Bachelor’s degree in Electrical Engineering, Mechanical Engineering or a closely related discipline.10–15 years of total experience, preferably in EPC / Design-Build environments. Strong experience in Data Center projects is highly preferred. Strong understanding of Data Center systems, including:Power infrastructure Cooling systems ICT / ELVBMS / DCIMControls Reliability and availability concepts Commissioning readiness Strong experience in tendering, estimation, value engineering and contract risk management. Proven experience in client management and multidisciplinary project coordination. Strong leadership, communication, stakeholder management and decision-making skills.<br>Preferred Certifications PMPPRINCE2 Practitioner NEBOSH IGCDCP / Certified Data Centre Professional (EPI)

<h3 >About MBRF and the Role</h3> <p >MBRF, one of the world’s largest food companies, is seeking a <strong >Senior Utilities Technician</strong> to join its team in <strong >Jeddah, Makkah, Saudi Arabia</strong>. This full-time position is crucial for maintaining the operational integrity of essential utility systems, contributing to MBRF's mission of nourishing life through quality and innovation.</p> <h3 >Role Overview</h3> <p >The Senior Utilities Technician is responsible for ensuring the continuous, safe, and efficient operation of refrigeration and HVAC systems. This includes executing both preventive and corrective maintenance to uphold high standards of quality, resource consumption, and control within the facilities.</p> <h3 >Key Responsibilities</h3> <ul > <li >Ensure continuous operation and maintain refrigeration/HVAC systems (including ammonia compressors, evaporative condensers, ammonia-glycol-tyfoxit-chilled water pumps, vacuum pumps, ACU, FCU, AHU, exhaust fans, and AC units) in perfect and safe working condition.</li> <li >Execute preventive and corrective maintenance to keep assets in optimal condition.</li> <li >Maintain high quality in electrical and mechanical operations, resource consumption, standards, and controls.</li> <li >Adhere to Corrective, Preventive, Scheduled Maintenance, and Kanban systems.</li> <li >Perform daily routine works, parameter monitoring, laboratory analysis, maintain activity reports and records, and ensure housekeeping in designated areas.</li> <li >Reduce the mean time of repair (MTTR) in production lines through effective presence and intervention.</li> <li >Assist in team development plans and trainings.</li> <li >Perform overhauling of equipment, motors, pumps, and other utility components independently.</li> <li >Identify local support, localization of spares, and cost-effective solutions.</li> <li >Solve complex problems by seeking knowledge from various sources, suppliers, and other MBRF teams.</li> </ul> <h3 >Compliance and Safety Standards</h3> <ul > <li >Comply with all Health, Safety and Environment (HSE) requirements and procedures within the workplace.</li> <li >Ensure proper handling of chemical products, tools, and the use of appropriate Personal Protective Equipment (PPE).</li> <li >Comply with HSE and food safety HACCP requirements, pre-requirements, Good Manufacturing Process (GMP), 5S compliance, and Food Defense requirements.</li> <li >Adhere to BRF Sustainability Policy guidelines and the BRF Sustainability Plan, promoting compliance with global ESG (Environmental, Social and Governance) commitments.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Minimum 2-year Technical course in Mechanical, Electrical, Electronic Engineering, or Refrigeration.</li> <li >5-10 years of professional experience in utilities maintenance or a related technical field.</li> </ul> <h3 >Work Environment</h3> <p >This full-time role is based in Jeddah, Makkah, Saudi Arabia, within a dynamic environment that emphasizes safety, quality, and continuous improvement in food production operations.</p>

<h3 >About MBRF and the Role</h3> <p >MBRF, one of the world’s largest food companies, is seeking a <strong >Senior Utilities Technician</strong> to join its team in <strong >Jeddah, Makkah, Saudi Arabia</strong>. This full-time position is crucial for maintaining the operational integrity of essential utility systems, contributing to MBRF's mission of nourishing life through quality and innovation.</p> <h3 >Role Overview</h3> <p >The Senior Utilities Technician is responsible for ensuring the continuous, safe, and efficient operation of refrigeration and HVAC systems. This includes executing both preventive and corrective maintenance to uphold high standards of quality, resource consumption, and control within the facilities.</p> <h3 >Key Responsibilities</h3> <ul > <li >Ensure continuous operation and maintain refrigeration/HVAC systems (including ammonia compressors, evaporative condensers, ammonia-glycol-tyfoxit-chilled water pumps, vacuum pumps, ACU, FCU, AHU, exhaust fans, and AC units) in perfect and safe working condition.</li> <li >Execute preventive and corrective maintenance to keep assets in optimal condition.</li> <li >Maintain high quality in electrical and mechanical operations, resource consumption, standards, and controls.</li> <li >Adhere to Corrective, Preventive, Scheduled Maintenance, and Kanban systems.</li> <li >Perform daily routine works, parameter monitoring, laboratory analysis, maintain activity reports and records, and ensure housekeeping in designated areas.</li> <li >Reduce the mean time of repair (MTTR) in production lines through effective presence and intervention.</li> <li >Assist in team development plans and trainings.</li> <li >Perform overhauling of equipment, motors, pumps, and other utility components independently.</li> <li >Identify local support, localization of spares, and cost-effective solutions.</li> <li >Solve complex problems by seeking knowledge from various sources, suppliers, and other MBRF teams.</li> </ul> <h3 >Compliance and Safety Standards</h3> <ul > <li >Comply with all Health, Safety and Environment (HSE) requirements and procedures within the workplace.</li> <li >Ensure proper handling of chemical products, tools, and the use of appropriate Personal Protective Equipment (PPE).</li> <li >Comply with HSE and food safety HACCP requirements, pre-requirements, Good Manufacturing Process (GMP), 5S compliance, and Food Defense requirements.</li> <li >Adhere to BRF Sustainability Policy guidelines and the BRF Sustainability Plan, promoting compliance with global ESG (Environmental, Social and Governance) commitments.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >Minimum 2-year Technical course in Mechanical, Electrical, Electronic Engineering, or Refrigeration.</li> <li >5-10 years of professional experience in utilities maintenance or a related technical field.</li> </ul> <h3 >Work Environment</h3> <p >This full-time role is based in Jeddah, Makkah, Saudi Arabia, within a dynamic environment that emphasizes safety, quality, and continuous improvement in food production operations.</p>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركه الشبكات الرقميه للاتصالات عن <strong >فني شبكات اتصالات</strong> للانضمام إلى فريقها في المنطقة الشرقية. يركز هذا الدور بدوام كامل على ضمان التشغيل السلس والموثوق لشبكات الاتصالات، بما في ذلك خدمات الهاتف والإنترنت، من خلال تمديد الأسلاك وتوصيل المعدات اللازمة.</p> <h3 >مهام الدور الرئيسية</h3> <p >يتولى فني شبكات الاتصالات مسؤولية تنفيذ مهام التركيب والصيانة الأساسية لضمان استمرارية وكفاءة عمل الشبكات. يشمل ذلك تمديد وتوصيل كافة الأسلاك داخل المباني وخارجها، بالإضافة إلى إعداد التقارير الفنية للمسؤول المباشر حول حالة الشبكة والأعمال المنجزة.</p> <h3 >المسؤوليات والمهام</h3> <ul > <li >تطبيق المعرفة بأنظمة الإرسال والبث والتبديل والتحكم في تشغيل أنظمة الاتصالات.</li> <li >مراقبة مشاكل الشبكة والعمل على إيجاد حلول لها تحت إشراف مهندس الشبكة.</li> <li >إجراء الصيانة الروتينية للمعدات والأدوات، وتحديد نوع وتوقيت الصيانة اللازمة.</li> <li >اختبار المعدات التي تم إصلاحها أو تركيبها حديثًا أو تحديثها للتأكد من مطابقتها للمواصفات وعملها بشكل صحيح.</li> <li >فحص الدوائر ومكونات معدات الاتصالات السلكية واللاسلكية المعطلة لتحديد مصادر الأعطال وإصلاحها.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >خبرة عملية تتراوح بين <strong >سنتين إلى خمس سنوات</strong> في مجال شبكات الاتصالات.</li> <li >فهم جيد لمبادئ تشغيل أنظمة الاتصالات وتوصيلاتها.</li> <li >القدرة على تشخيص الأعطال وإجراء الإصلاحات الفنية.</li> </ul> <h3 >بيئة العمل</h3> <p >هذا الدور هو وظيفة <strong >بدوام كامل</strong> ضمن فريق شركه الشبكات الرقميه للاتصالات في المنطقة الشرقية. يتطلب العمل الميداني أحيانًا لتمديد الأسلاك وصيانة المعدات في مواقع مختلفة.</p> <h3 >التقديم</h3> <p >ندعو المهتمين ممن تنطبق عليهم المتطلبات المذكورة أعلاه للتقديم على هذا الدور.</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The CPL Field Specialist is responsible for maintaining safe, efficient, and reliable PSD to customers. The CPL Field Specialist identifies opportunities to improve service delivery, implements standard work, and manages risk during service delivery. </p><ul><li>Ensure job deliverables are accurate and delivered on time.<br></li><li>Responsible for service delivery execution.<br></li><li>Participate in job risk analysis and continual improvement programs.<br></li><li>Develop customer contacts to promote company products and services.<br></li><li>Ensure company and regulatory standard compliance by implementing the CAT, self-assessments, and wellsite inspections.<br></li><li>Participate in Service Quality Meetings with customers and improve performance using action plans.<br></li><li>Participate in HSE and Quality initiatives.<br></li><li>Wear PPE and observe HSE policies.<br></li><li>Maintain the required safety training.</li></ul><ul><li>Education, Technical Diploma in Mechanical Engineering or a related discipline.</li><li> Minimum 5 years of hands-on experience in Liner Hanger operations proven experience with:<br>o Cemented Liner Hanger applications (Hydraulic and mechanical)<br>o Non-cemented Liner Hanger applications.( Hydraulic and mechanical)o Open Hole and Cemented (MSF) systems.o Off- Bottom Cement applications.</li><li>Strong understanding of hydraulic calculations related to liner hanger operations.</li><li>Good knowledge of completion design principles and operational planning.</li><li>Proficient in Microsoft Excel and Microsoft Word.</li><li>Experience using completion engineering software, including:</li><li>Ability to read and interpret technical drawings, procedures, and engineering calculations.</li><li>Experience working in Saudi Arabia and with Aramco standards (preferred).</li><li>Demonstrated troubleshooting and problem-solving skills in field operations.</li><li>Strong communication skills and the ability to work effectively with multidisciplinary teams.</li></ul><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p> Costing &amp; Estimation Engineer (Steel &amp; Aluminum Metal Works</p><p><br></p><p>Company: Nepras Dubai Industrial Company (NDIC)</p><p>Location:Riyadh, Saudi Arabia</p><p>Industry:Metal Fabrication (Steel, Aluminum, MEP Systems)</p><p><br></p><p>Position Overview</p><p><br></p><p>We are seeking a highly skilled Costing &amp; Estimation Engineer with strong experience in metal works fabrication to lead accurate project pricing, cost control, and tender preparation.</p><p><br></p><p>The role is mission-critical to ensure:</p><p><br></p><p>* Zero pricing errors</p><p>* Realistic technical proposals</p><p>* Strong profit margins</p><p>* Fast and competitive quotations</p><p><br></p><p>---</p><p><br></p><p>Key Responsibilities</p><p><br></p><p>1. Estimation &amp; Tendering</p><p><br></p><p>* Analyze RFQs, drawings, BOQs, and specifications</p><p>* Prepare detailed cost estimates for:</p><p><br></p><p>&nbsp;* Steel works (doors, handrails, structures, access systems)</p><p>&nbsp;* Aluminum works (windows, curtain walls, partitions)</p><p>&nbsp;* Cable trays, enclosures, racks (MEP-related products)</p><p>* Conduct **material take-offs (MTO)** with high accuracy</p><p>* Prepare and submit **commercial &amp; technical quotations**</p><p><br></p><p>---</p><p><br></p><p>2. Costing &amp; Pricing Control**</p><p><br></p><p>* Develop detailed cost breakdown including:</p><p><br></p><p>&nbsp;* Raw materials (MS, SS, Aluminum profiles, accessories)</p><p>&nbsp;* Labor (fabrication, welding, assembly)</p><p>&nbsp;* Finishing (powder coating, galvanizing, polishing)</p><p>&nbsp;* Overheads &amp; logistics</p><p><br></p><p>* Ensure all pricing:</p><p><br></p><p>&nbsp;* Reflects actual market availability</p><p>&nbsp;* Matches production capability</p><p>&nbsp;* Includes contingency and margin protection</p><p><br></p><p>---</p><p><br></p><p>3. Technical Validation (CRITICAL FOR NDIC)**</p><p><br></p><p>* Verify that all proposed materials:</p><p><br></p><p>&nbsp;* Exist in the market</p><p>&nbsp;* Are available locally or importable within timeline</p><p>* Prevent **fatal mistakes** such as:</p><p><br></p><p>&nbsp;* Quoting non-available profiles</p><p>&nbsp;* Wrong thickness/specifications</p><p>&nbsp;* Unrealistic commitments to clients</p><p><br></p><p>---</p><p><br></p><p>4. Coordination</p><p><br></p><p>* Work closely with:</p><p><br></p><p>&nbsp;* Sales team (for fast quotations)</p><p>&nbsp;* Production team (for manufacturability validation)</p><p>&nbsp;* Procurement (for real supplier pricing)</p><p><br></p><p>---</p><p><br></p><p>5. Supplier &amp; Market Analysis</p><p><br></p><p>* Source and compare supplier quotations</p><p>* Maintain updated database for:</p><p><br></p><p>&nbsp;* Steel prices</p><p>&nbsp;* Aluminum systems</p><p>&nbsp;* Accessories (hinges, locks, gaskets, etc.)</p><p><br></p><p>---</p><p><br></p><p>6. Value Engineering</p><p><br></p><p>* Propose cost-saving alternatives without compromising quality</p><p>* Suggest:</p><p><br></p><p>&nbsp;* Alternative materials</p><p>&nbsp;* Modular solutions</p><p>&nbsp;* Easier fabrication methods</p><p><br></p><p>---</p><p><br></p><p>7. Documentation &amp; Systems</p><p><br></p><p>* Maintain costing sheets (with Odoo Software)</p><p>* Track:</p><p><br></p><p>&nbsp;* Estimated vs actual cost</p><p>&nbsp;* Profit margins per project</p><p>* Build NDIC internal **costing standards library**</p><p><br></p><p>---</p><p><br></p><p>Required Qualifications</p><p><br></p><p>* Bachelor’s Degree in:</p><p><br></p><p>&nbsp;* Mechanical Engineering / Industrial Engineering / Civil Engineering</p><p>* Experience: **3–5 years minimum**</p><p>* Strong background in:</p><p><br></p><p>&nbsp;* Steel fabrication ( Solid works, TEKLA, SAP, ETAB )</p><p>&nbsp;* Aluminum systems&nbsp;</p><p>&nbsp;* Metal works projects</p><p><br></p><p>---</p><p>Technical Skills</p><p><br></p><p>* Advanced Excel (mandatory)</p><p><br></p><p>* Experience in ERP systems (preferably Odoo)</p><p><br></p><p>* Ability to read:</p><p><br></p><p>&nbsp;* Shop drawings</p><p>&nbsp;* Structural drawings</p><p>&nbsp;* Architectural drawings</p><p><br></p><p>* Knowledge of: CNC design , Laser cutting , Bending&nbsp;</p><p><br></p><p>&nbsp;* Welding (MIG / TIG)</p><p>&nbsp;* Sheet metal processes (laser cutting, bending)</p><p>&nbsp;* Finishing processes</p><p><br></p><p>---</p><p>Soft Skills (VERY IMPORTANT)</p><p><br></p><p>* High attention to detail</p><p>* Strong analytical thinking</p><p>* Ability to work under pressure</p><p>* Clear communication with sales &amp; management</p><p>* Accountability (zero tolerance for pricing errors)</p><p><br></p><p>---</p><p><br></p><p>Nationality Preference</p><p><br></p><p>all candidates preferred** (due to strong experience in GCC metal works sector)</p><p><br></p><p>---</p><p>Salary &amp; Benefits (Suggested Structure)</p><p><br></p><p>* Basic Salary: 4,000 - 5000 SAR (based on experience)</p><p>* Transportation / Car (optional based on role level)</p><p>* Performance bonus linked to:</p><p><br></p><p>&nbsp;* Accuracy of estimation</p><p>&nbsp;* Profitability of projects</p><p><br></p><p>---</p><p><br></p><p>Key Performance Indicators (KPIs)</p><p><br></p><p>* Accuracy of cost estimates</p><p>* Gross profit margin achieved vs estimated</p><p>* Number of errors in quotations (target: ZERO)</p><p>* Speed of quotation submission</p><p>* Material wastage reduction</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Mechanical Engineering with SOLID WORKS experience</p><p>Auto-cad </p></div>

<p>We are seeking experienced Well Testing Equipment Operators to join our team supporting oilfield operations in Saudi Arabia. The successful candidates will be responsible for the safe and efficient operation, monitoring and maintenance of well testing equipment at the wellsite. The role will involve supporting Well Testing Supervisors and other operational personnel during rig-up, testing, production, clean-up and rig-down activities. Previous experience with SLB (Schlumberger) is preferred and will be considered a significant advantage. The day rate for this position will be between $140 $160 please do not apply for this position if you would not accept the day rates Key Responsibilities Operate and monitor well testing equipment safely and efficiently during wellsite operations. Assist with the rig-up, function testing and rig-down of well testing equipment. Operate equipment including separators, manifolds, chokes, flow lines, sand traps, heaters and associated well testing systems as required. Monitor pressure, temperature, flow rates and other operating parameters. Ensure equipment is operated within approved operating limits and procedures. Conduct pre-job inspections and equipment checks prior to commencing operations. Carry out pressure testing and equipment integrity checks in accordance with approved procedures. Monitor equipment performance and report any abnormal conditions, leaks or equipment defects. Assist with troubleshooting and basic maintenance of well testing equipment. Maintain accurate equipment, pressure and operational records. Follow instructions from the Well Testing Supervisor and communicate operational information promptly. Assist with well clean-up, flowback, production testing and other well testing activities as required. Safely control and monitor flow during well testing operations. Assist with equipment shutdown, depressurisation and rig-down following completion of operations. Maintain good housekeeping around the well testing package and worksite. Participate in toolbox talks, pre-job meetings and safety briefings. Follow all company, client and Saudi Arabian HSE requirements. Report unsafe conditions, incidents, near misses and equipment issues immediately. Support other wellsite activities as directed by the Well Testing Supervisor</p><p><strong>Desired Candidate Profile</strong></p><p>Previous experience as a Well Testing Equipment Operator or similar role within the Oil &amp; Gas / Well Services industry. Practical experience operating well testing equipment in a wellsite environment. Good understanding of surface well testing operations and equipment. Experience with high-pressure equipment and associated safety procedures. Ability to read and understand operating procedures, equipment manuals and basic P&amp;IDs. Basic understanding of pressure, flow and temperature monitoring. Good mechanical aptitude and troubleshooting ability. Strong commitment to HSE and safe working practices. Ability to work effectively as part of a multidisciplinary and multicultural team. Willingness to work rotational schedules in Saudi Arabia. Valid passport and ability to obtain the required Saudi Arabian work visa and medical clearance.</p>

<p>Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International s founders established a simple yet powerful formula: Approach each client engagement as a partnership , create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards.</p><p><strong>Desired Candidate Profile</strong></p><h2>Required Qualifications</h2><p>Bachelor s degree in Civil, Mechanical, Electrical Engineering, or a related engineering discipline. Strong QA/QC management experience on major construction or capital projects. Experience in hyperscale data centers, mission-critical facilities, infrastructure, EPC, or PMC environments. Strong knowledge and practical implementation of ISO 9001 Quality Management Systems. Experience developing and implementing Quality Management Plans. Extensive experience with inspections, ITPs, audits, quality documentation, and compliance management. Strong experience reviewing, closing, and escalating NCRs. Knowledge of root cause analysis and corrective/preventive action management. Experience monitoring and reporting quality KPIs to senior project stakeholders. Strong stakeholder coordination, communication, and problem-solving skills. Proficiency in Microsoft Office.</p><h2>Preferred Qualifications</h2><p>ISO 9001 Lead Auditor, Certified Quality Engineer (CQE), or equivalent quality certification. Experience on hyperscale data center or mission-critical projects. Knowledge of international quality standards and construction best practices. Familiarity with electronic Quality Management Systems and document control platforms. Experience with commissioning quality processes and handover documentation. Experience developing quality dashboards and performance analytics. Knowledge of FIDIC contracts and associated QA/QC requirements. Strong leadership, team mentoring, and stakeholder management skills.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Location: Western Region, Saudi Arabia Job Summary Applus Arabia is looking for an Inspection Engineer to support inspection activities in the Western Region, with experience in amusement rides/playgrounds and elevators/escalators.<br> The role will also support client visits, business development activities, and preparation of technical documentation.<br> Key Responsibilities · Perform inspection activities for amusement rides, playgrounds, elevators, and escalators as per applicable standards and client requirements.<br> · Conduct site inspections and prepare technical inspection reports and certificates following company IMS procedures.<br> · Support client visits, service presentations, and business development/sales activities in the Western Region.<br> · Assist in preparing inspection procedures, checklists, technical files, and accreditation-related documentation.<br> · Coordinate inspection assignments with clients and internal teams and follow up on project requirements.<br> · Support the development of amusement rides and playground inspection services within the department.<br> · Comply with QHSE, quality, safety, and impartiality requirements during all inspection activities.<br> · Provide technical support and basic training to the team when required.<br> Requirements · Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or a related engineering field.<br> · Experience in amusement rides and/or playground inspection.<br> · Experience in elevator and escalator inspection.<br> · Knowledge of inspection methods, technical reporting, checklists, and applicable inspection procedures.<br> · Ability to communicate with clients and support sales/business development activities.<br> · Willingness to be based in or support projects in the Western Region.<br> · Good English communication skills; Arabic is an advantage.<br> Skills &amp; Competencies · Strong technical inspection and reporting skills.<br> · Ability to follow procedures and technical instructions accurately.<br> · Good client communication and coordination skills.<br> · Attention to detail and commitment to quality and safety.<br> · Ability to explain inspection activities during audits or client meetings.<br> · Business development mindset and willingness to support sales activities.<br> · Ability to work independently and manage site assignments</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Valve Shop Technician II<br><br><p><b>VALVE SHOP TECHNICIAN-II</b></p><br><br><p><b>CMAI07 - Maintenance Mechanic, multi-validated</b></p><br><br><br><p>KBR is a company of innovators, thinkers, creators, explorers, volunteers, and dreamers and we all share one goal of improving the World and Beyond: responsibly, and safely. We attract a diverse workforce and the best minds in the world because our expertise thrives on creativity, resourcefulness, and collaboration.</p><br><br><br><p>KBR is looking for VALVE TECHNICIAN II who Maintains Rotating equipment’s in good condition. Carryout installation, Maintenance and Repair of Rotating equipment’s and Mechanical systems to required standards.</p><br><br><br><p><b>Responsibilities:</b></p><br><br><ul><li><p>Allocate maintenance activities to various Technicians and assemble the team.</p><br><br></li><li><p>Supervise all ongoing jobs and update the progress to Foreman.</p><br><br></li><li><p>Organize manpower resources, equipment’s and materials availability.</p><br><br></li><li><p>Arrange necessary work permits before starting of work.</p><br><br></li><li><p>Provide technical advice to Technicians to use proper tools and equipment’s.</p><br><br></li><li><p>Co-ordinate with Operations, Maintenance Planning and Technical departments to execute and complete the job.</p><br><br></li><li><p>Ensure that SAP data input, history and actual hours are maintained.</p><br><br></li><li><p>Attend daily and weekly maintenance progress meetings.</p><br><br></li><li><p>Maintain strict compliance with SATORP standards and guidelines.</p><br><br></li><li><p>Ensure the compliance of safe work practices, hazardous work regulations and PPE usage according to SATORP standards.</p><br><br></li><li><p>Encourage reporting of Near miss, unsafe conditions and acts.</p><br><br></li><li><p>Participates in Safety audits.</p><br><br></li><li><p>Attend the Safety and Technical training as scheduled.</p><br><br></li></ul><br><p><b>Qualifications:</b></p><br><br><ul><li><p>Minimum 2-4 years’ experience in Oil &amp; Gas maintenance – Diploma/Bachelors.</p><br><br></li><li><p>Strong technical understanding of maintenance management of Oil &amp; Gas Facilities</p><br><br></li><li><p>Well organized and proactive with excellent communication skills</p><br><br></li><li><p>Proven leadership skills with large organizations</p><br><br></li><li><p>Maturity of judgment under pressure and ability to resolve problems</p><br><br></li><li><p>Strategic management skills</p><br><br></li><li><p>An ability to achieve business results working in a multi-cultural environment</p><br><br></li></ul><br><p><b>Belong. Connect. Grow. with KBR!</b></p><br><br><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 1+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>System&nbsp;Operation&nbsp;Specialist&nbsp;|&nbsp;Al-Kharj,&nbsp;Saudi&nbsp;Arabia</strong></p><br><br> <br> <br> <p><strong>About&nbsp;Almarai:</strong> Founded in 1977, Almarai Company is the world’s largest vertically integrated dairy company and the largest food and beverage manufacturing and distribution company in MENA. Headquartered in Riyadh, Almarai Company is ranked as the number one FMCG Brand in the MENA region and the market leader in all its categories across GCC, Egypt, and Jordan.</p><br><br> <br> <p>Over five decades of sustainable growth, Almarai has consistently provided nutritious and healthy products to consumers of all ages, driven by its core principle: “Quality you can trust.”</p><br><br> <br> <p>Almarai has expanded its product range to include, in addition to dairy products, juices and beverages, baked goods, poultry, infant formula, dates, fish and seafood, and bottled water, under more than 20 brands such as Almarai, L’usine, 7DAYS, ALYOUM, Nuralac, Farm’s Select, Ice Leaf, Almira, Seama, Oska, IVAL, Almara Pro, Premier Chef, Bakemart, and others.&nbsp;</p><br><br> <br> <p>Almarai currently employs over 43,000 Quality Makers, across the GCC, Egypt &amp; Jordan. In 2025, Almarai reported net income of SAR 2.4 billion on sales of SAR 22 billion.</p><br><br> <br> <p><strong>About&nbsp;the&nbsp;Role:</strong> To ensure the safe, reliable, and effective operation of all automated and non automated warehousing materials handling equipment and systems to meet Almarai business requirements.&nbsp;</p><br><br> <br> <ol> <li>Hands&nbsp;on&nbsp;repair&nbsp;and&nbsp;maintenance&nbsp;of&nbsp;automated&nbsp;material&nbsp;handling&nbsp;equipment.</li> <li>Diagnose&nbsp;and&nbsp;fix&nbsp;the&nbsp;electrical,&nbsp;electronic&nbsp;&amp;&nbsp;mechanical&nbsp;faults.</li> <li>Assist&nbsp;the&nbsp;installation&nbsp;teams&nbsp;with&nbsp;the&nbsp;preparation&nbsp;and&nbsp;installation&nbsp;of&nbsp;automatic&nbsp;materials&nbsp;handling&nbsp;equipment.</li> <li>&nbsp;Supporting&nbsp;the&nbsp;operation&nbsp;with&nbsp;the&nbsp;recovery&nbsp;and&nbsp;resolution&nbsp;of&nbsp;all&nbsp;short&nbsp;term&nbsp;and&nbsp;long-term&nbsp;faults/stoppages.</li> <li>Breakdown&nbsp;resolution&nbsp;reporting&nbsp;and&nbsp;follow&nbsp;up,</li> </ol> <br> <p><strong>Requirements:</strong></p><br><br> <ul> <li>Must&nbsp;be&nbsp;holding&nbsp;bachelor’s&nbsp;degree&nbsp;in&nbsp;an&nbsp;Electrical&nbsp;or&nbsp;Mechanical&nbsp;Engineering.</li> <li>Proven&nbsp;experience&nbsp;with&nbsp;industrial&nbsp;automation&nbsp;systems&nbsp;(PLC,&nbsp;HMI,&nbsp;SCADA).</li> <li>Hands‑on&nbsp;knowledge&nbsp;of&nbsp;PLC&nbsp;programming&nbsp;(e.g.,&nbsp;Siemens,&nbsp;Allen‑Bradley,&nbsp;Schneider).</li> <li>Experience&nbsp;in&nbsp;control&nbsp;systems&nbsp;design,&nbsp;troubleshooting,&nbsp;and&nbsp;commissioning.</li> <li>Familiarity&nbsp;with&nbsp;industrial&nbsp;communication&nbsp;protocols&nbsp;(Profibus,&nbsp;Modbus,&nbsp;Profinet,&nbsp;Ethernet/IP).</li> <li>Good&nbsp;verbal&nbsp;and&nbsp;written&nbsp;communication&nbsp;English&nbsp;skills.</li> <li>Must have competencies such as: Ability to plan and organize multiple activities simultaneously. Good verbal and written communication skills in English. Good interpersonal skills, Positive enthusiastic attitude towards work.</li> </ul> <br> <p>Almarai&nbsp;offers&nbsp;a&nbsp;competitive&nbsp;package,&nbsp;generous&nbsp;leave,&nbsp;medical&nbsp;coverage,&nbsp;discretionary&nbsp;bonus,&nbsp;training,&nbsp;and&nbsp;development&nbsp;etc.</p><br><br> <br> <p>This&nbsp;is&nbsp;a&nbsp;great&nbsp;opportunity&nbsp;to&nbsp;join&nbsp;a&nbsp;successful&nbsp;and&nbsp;expanding&nbsp;global&nbsp;business,&nbsp;offering&nbsp;an&nbsp;excellent&nbsp;remuneration&nbsp;and&nbsp;benefits&nbsp;package.</p><br><br> <br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

About the Company Established in 1972, Saudico is one of the Kingdom of Saudi Arabia’s most reputable and long-standing construction companies. With over 52 years of continuous contribution to the nation’s development, Saudico has earned a Grade One classification from the Ministry of Housing and Public Works, reflecting its technical capability, financial strength, and proven performance.<br>Job Description To provide technical support in the installation, inspection, testing, and commissioning of electrical systems, ensuring that all work is carried out in accordance with approved drawings, specifications, quality requirements, and safety standards.<br>Key Responsibilities:· Assist in monitoring and executing electrical works at the site.· Review electrical drawings, shop drawings, and technical specifications.· Inspect cable trays, conduits, wiring, lighting systems, electrical panels, and distribution boards.· Ensure that electrical installations comply with approved shop drawings.· Assist in testing and commissioning electrical systems and equipment.· Coordinate with civil, architectural, and mechanical teams to prevent installation conflicts.· Prepare progress reports and maintain inspection and testing records.· Identify electrical defects and observations and follow up on corrective actions.· Assist in preparing red-line drawings and as-built drawings.· Ensure that approved electrical materials and equipment are used.· Comply with electrical safety procedures and project requirements.<br>Qualifications & Experience:· Diploma in Electrical Engineering, Electrical Technology, or a related field.· Fresh graduate or up to 5 years of relevant experience in electrical works or construction projects.· Knowledge of electrical systems, drawings, inspection procedures, and testing requirements.· Familiarity with Auto CAD and Microsoft Office.· Ability to read electrical drawings and technical specifications.<br>Required Skills· Electrical installation and inspection skills.· Ability to read electrical drawings.· Troubleshooting and problem-solving abilities.· Knowledge of electrical safety requirements.· Good coordination and communication skills.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>System&nbsp;Operation&nbsp;Specialist&nbsp;|&nbsp;Al-Kharj,&nbsp;Saudi&nbsp;Arabia</strong></p><br><br> <br> <br> <p><strong>About&nbsp;Almarai:</strong> Founded in 1977, Almarai Company is the world’s largest vertically integrated dairy company and the largest food and beverage manufacturing and distribution company in MENA. Headquartered in Riyadh, Almarai Company is ranked as the number one FMCG Brand in the MENA region and the market leader in all its categories across GCC, Egypt, and Jordan.</p><br><br> <br> <p>Over five decades of sustainable growth, Almarai has consistently provided nutritious and healthy products to consumers of all ages, driven by its core principle: “Quality you can trust.”</p><br><br> <br> <p>Almarai has expanded its product range to include, in addition to dairy products, juices and beverages, baked goods, poultry, infant formula, dates, fish and seafood, and bottled water, under more than 20 brands such as Almarai, L’usine, 7DAYS, ALYOUM, Nuralac, Farm’s Select, Ice Leaf, Almira, Seama, Oska, IVAL, Almara Pro, Premier Chef, Bakemart, and others.&nbsp;</p><br><br> <br> <p>Almarai currently employs over 43,000 Quality Makers, across the GCC, Egypt &amp; Jordan. In 2025, Almarai reported net income of SAR 2.4 billion on sales of SAR 22 billion.</p><br><br> <br> <p><strong>About&nbsp;the&nbsp;Role:</strong> To ensure the safe, reliable, and effective operation of all automated and non automated warehousing materials handling equipment and systems to meet Almarai business requirements.&nbsp;</p><br><br> <br> <ol> <li>Hands&nbsp;on&nbsp;repair&nbsp;and&nbsp;maintenance&nbsp;of&nbsp;automated&nbsp;material&nbsp;handling&nbsp;equipment.</li> <li>Diagnose&nbsp;and&nbsp;fix&nbsp;the&nbsp;electrical,&nbsp;electronic&nbsp;&amp;&nbsp;mechanical&nbsp;faults.</li> <li>Assist&nbsp;the&nbsp;installation&nbsp;teams&nbsp;with&nbsp;the&nbsp;preparation&nbsp;and&nbsp;installation&nbsp;of&nbsp;automatic&nbsp;materials&nbsp;handling&nbsp;equipment.</li> <li>&nbsp;Supporting&nbsp;the&nbsp;operation&nbsp;with&nbsp;the&nbsp;recovery&nbsp;and&nbsp;resolution&nbsp;of&nbsp;all&nbsp;short&nbsp;term&nbsp;and&nbsp;long-term&nbsp;faults/stoppages.</li> <li>Breakdown&nbsp;resolution&nbsp;reporting&nbsp;and&nbsp;follow&nbsp;up,</li> </ol> <br> <p><strong>Requirements:</strong></p><br><br> <ul> <li>Must&nbsp;be&nbsp;holding&nbsp;bachelor’s&nbsp;degree&nbsp;in&nbsp;an&nbsp;Electrical&nbsp;or&nbsp;Mechanical&nbsp;Engineering.</li> <li>Proven&nbsp;experience&nbsp;with&nbsp;industrial&nbsp;automation&nbsp;systems&nbsp;(PLC,&nbsp;HMI,&nbsp;SCADA).</li> <li>Hands‑on&nbsp;knowledge&nbsp;of&nbsp;PLC&nbsp;programming&nbsp;(e.g.,&nbsp;Siemens,&nbsp;Allen‑Bradley,&nbsp;Schneider).</li> <li>Experience&nbsp;in&nbsp;control&nbsp;systems&nbsp;design,&nbsp;troubleshooting,&nbsp;and&nbsp;commissioning.</li> <li>Familiarity&nbsp;with&nbsp;industrial&nbsp;communication&nbsp;protocols&nbsp;(Profibus,&nbsp;Modbus,&nbsp;Profinet,&nbsp;Ethernet/IP).</li> <li>Good&nbsp;verbal&nbsp;and&nbsp;written&nbsp;communication&nbsp;English&nbsp;skills.</li> <li>Must have competencies such as: Ability to plan and organize multiple activities simultaneously. Good verbal and written communication skills in English. Good interpersonal skills, Positive enthusiastic attitude towards work.</li> </ul> <br> <p>Almarai&nbsp;offers&nbsp;a&nbsp;competitive&nbsp;package,&nbsp;generous&nbsp;leave,&nbsp;medical&nbsp;coverage,&nbsp;discretionary&nbsp;bonus,&nbsp;training,&nbsp;and&nbsp;development&nbsp;etc.</p><br><br> <br> <p>This&nbsp;is&nbsp;a&nbsp;great&nbsp;opportunity&nbsp;to&nbsp;join&nbsp;a&nbsp;successful&nbsp;and&nbsp;expanding&nbsp;global&nbsp;business,&nbsp;offering&nbsp;an&nbsp;excellent&nbsp;remuneration&nbsp;and&nbsp;benefits&nbsp;package.</p><br><br> <br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 >About the Role</h3> <p >GE Vernova is seeking a <strong >Sr Manufacturing Manager Production Supervision</strong> to lead daily operations within a designated assembly cell. This full-time position is based in Dammam, Eastern Region, KSA, and focuses on ensuring the highest standards of safety, quality, delivery, and cost performance in the manufacturing environment.</p> <h3 >Role Overview</h3> <p >The Sr Manufacturing Manager Production Supervision serves as the primary link between plant leadership and cross-functional operational teams. This role is responsible for driving the execution of production plans, fostering a culture of continuous improvement, and ensuring strict compliance with GE Vernova’s manufacturing, quality, and safety standards. The position involves direct leadership of shop floor personnel and close coordination with Engineering, Quality, Supply Chain, Planning, Maintenance, and EHS teams to achieve customer commitments and maximize productivity.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead daily assembly cell operations to ensure safe, efficient, and on-time production.</li> <li >Manage manpower and resources effectively to meet customer and business needs.</li> <li >Collaborate closely with Production, Engineering, Quality, Materials, Planning, and Maintenance teams to resolve issues and maintain smooth operations.</li> <li >Track key performance indicators (KPIs) such as Safety, Quality, Delivery, Cost, and Productivity, implementing corrective actions as needed.</li> <li >Promote a strong safety culture and ensure compliance with EHS requirements and company standards.</li> <li >Support quality excellence by ensuring work is completed according to engineering, manufacturing, and quality requirements.</li> <li >Lead and develop the team through coaching, performance feedback, and training support.</li> <li >Drive continuous improvement initiatives using Lean principles to enhance efficiency, productivity, and workflow.</li> <li >Ensure equipment, tools, and resources are available and functioning properly to support production.</li> <li >Contribute to productivity, cost reduction, and overall business performance goals.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates for this role should possess 5-10 years of relevant experience and meet the following criteria:</p> <ul > <li >Legal right to work in KSA without company sponsorship or time restrictions.</li> <li >Experience in gas turbine, power generation, aerospace, heavy machinery, rotating equipment, or other high-precision assembly environments is preferred.</li> <li >Knowledge of EHS management systems and operational risk management.</li> <li >Experience leading transformation, productivity, or capacity expansion initiatives in a manufacturing environment.</li> <li >Strong analytical and data-driven decision-making capabilities using operational performance metrics and reporting tools.</li> <li >A Master's degree is considered an advantage.</li> </ul> <h3 >Work Environment and Logistics</h3> <p >This is a full-time position located in Dammam, Eastern Region, KSA. Please note that relocation assistance is not provided for this role.</p> <h3 >Application Information</h3> <p >GE Vernova is committed to building a skilled and dedicated team. Qualified candidates are encouraged to apply.</p>