Field Representative Jobs

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY &amp; KEY AREAS OF RESPONSIBILITY: Position responsible for installation, maintenance and repairs on equipment within an assigned territory/region to assure continuity of customer operations and high levels of customer satisfaction. Responsible for ownership of customer problems or incidents until the situation has been resolved to the customers satisfaction and or in compliance with agreed upon Service Level Agreements. Required to perform work on products and services of low complexity, specifically financial/ATM products; Make minor repairs and replace components on Tier I equipment such as PCs, workstations and peripherals, printers, front-end POS systems, Second Line Maintenance on ATMs and kiosks, and single pocket proof encoders. Responsible for assisting in site preparation, including installation of cable, staging of equipment, and minor testing of equipment; May also perform required modular swaps and unit replacements. Customer Engineer responds to all customer concerns or problems by resolving them or by escalating them to the proper associate, team member, territory manager, or the Control Tower. Build working relationships with customers and develop informal communication channels with customer account at the local level; Represents NCR in a manner that reflects positively on the image and reputation of the company. Performs periodic preventative maintenance on assigned products; Diagnoses problems, makes minor repairs, and replaces components (at the module level); Follows appropriate security procedures when working with ATM's and or within financial institution. Responsible for all NCR assets that will be used in the delivery of customer services (i.e. tools, software, vehicles, documentation, and intellectual property), or as assigned by management; Maintain an appropriate parts inventory as well as parts record keeping. Responsible for accurate and prompt reporting of calls and activity, as well as other reporting as required; Responsible for tracking and reporting all expenses incurred in the delivery of services, including telephone, private automobile, and/or public transportation. Responsible for capturing detailed customer asset information and other data required to complete any invoicing or billing activities. May be dispatched daily on a call-by-call basis or may establish his/her own daily schedule on the basis of automated reports. May require prolonged travel, carrying and lifting tool kit/parts of varying weights (1- 50 lbs.); May require bending/squatting, walking/standing /sitting for prolonged periods; May be required to work on rotating shifts. Ensure staff productivity measures are achieved; Work together with Call Center Staff via PDA to recover machines; Work together with Security Escort Officer. MANDATORY Driving license PREFERRED QUALIFICATIONS Ability to work with Microsoft Office Experience on Windows operating systems required Experience in PC Hardware Maintenance and support Degree in Electronics, Engineering, or a technical field Previous experience in NCR or similar equipment is a plus CCNA preferred Offers of employment are conditional upon passage of screening criteria applicable to the job.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Ability to work with Microsoft Office Experience on Windows operating systems required Experience in PC Hardware Maintenance and support Degree in Electronics, Engineering, or a technical field Previous experience in NCR or similar equipment is a plus CCNA preferred</p><p></p></section>

Egis is an international player active in architecture, consulting, construction engineering and mobility services. We create and operate intelligent infrastructures and buildings that respond to the climate emergency and contribute to more balanced, sustainable and resilient territorial development. Operating in 100 countries, Egis puts the expertise of its 19,500 employees at the service of its clients and develops cutting-edge innovations accessible to all projects. Through its wide range of activities, Egis is a key player in the collective organisation of society and the living environment of citizens all over the world.<br><br>With 3,500 employees across 8 countries in the Middle East, Egis has delivered over 700 complex development projects, stimulating economic growth and enhancing quality of life. Ranked among the top ten firms in the Middle East by Engineering News Record (ENR), Egis is committed to sustainable development. The Group’s operations in the Middle East are built on strategic acquisitions and a deep understanding of local market conditions. Egis has long history of providing comprehensive engineering, consulting, and project management services makes it a trusted partner for regional governments, investors, and developers.<br><br><br><br>Job Description<br><br>We are seeking a highly skilled and detail-oriented Electrical Inspector to join our team in Riyadh, Saudi Arabia. In this critical role, you will be responsible for ensuring the safety, quality, and compliance of electrical installations across various projects in the region.<br><br>Conduct thorough inspections of electrical systems and components to ensure compliance with local and international codes and standards Review and interpret electrical drawings, schematics, and specifications for accuracy and adherence to regulations Perform comprehensive tests on electrical installations using specialized equipment to verify safety and functionality Identify and document electrical deficiencies, code violations, and potential safety hazards Collaborate with contractors, engineers, and project managers to resolve electrical issues and ensure timely project completion Prepare detailed inspection reports and maintain accurate records of all inspections and findings Stay up-to-date with changes in Saudi Arabian and international electrical codes, regulations, and industry best practices Provide expert guidance and recommendations to improve electrical safety and efficiency on project sites Participate in pre-construction meetings to discuss electrical requirements and potential challenges Ensure strict compliance with Saudi Arabian electrical standards and regulations Travel to various project sites within Saudi Arabia as required<br><br><br>Qualifications<br><br>Bachelor's degree in Electrical Engineering or related field Minimum of 10 years of experience in electrical inspection or related field Proficiency in Saudi Arabian and international electrical codes and standards Extensive knowledge of electrical systems and components Strong ability to read and interpret electrical drawings and schematics Proven experience working on construction sites and industrial facilities Expertise in using various testing equipment and inspection tools Excellent problem-solving and analytical skills Strong written and verbal communication skills in English; Arabic language skills are a plus Proficiency in Microsoft Office and relevant inspection software Meticulous attention to detail with a strong commitment to safety and quality In-depth knowledge of construction industry regulations and safety standards Ability to work efficiently in a fast-paced, dynamic environment Familiarity with Saudi Arabian construction practices and regulations

Egis is an international player active in architecture, consulting, construction engineering and mobility services. We create and operate intelligent infrastructures and buildings that respond to the climate emergency and contribute to more balanced, sustainable and resilient territorial development. Operating in 100 countries, Egis puts the expertise of its 19,500 employees at the service of its clients and develops cutting-edge innovations accessible to all projects. Through its wide range of activities, Egis is a key player in the collective organisation of society and the living environment of citizens all over the world.<br><br>With 3,500 employees across 8 countries in the Middle East, Egis has delivered over 700 complex development projects, stimulating economic growth and enhancing quality of life. Ranked among the top ten firms in the Middle East by Engineering News Record (ENR), Egis is committed to sustainable development. The Group’s operations in the Middle East are built on strategic acquisitions and a deep understanding of local market conditions. Egis has long history of providing comprehensive engineering, consulting, and project management services makes it a trusted partner for regional governments, investors, and developers.<br><br><br><br>Job Description<br><br>We are seeking a highly skilled and detail-oriented Electrical Inspector to join our team in Riyadh, Saudi Arabia. In this critical role, you will be responsible for ensuring the safety, quality, and compliance of electrical installations across various projects in the region.<br><br>Conduct thorough inspections of electrical systems and components to ensure compliance with local and international codes and standards Review and interpret electrical drawings, schematics, and specifications for accuracy and adherence to regulations Perform comprehensive tests on electrical installations using specialized equipment to verify safety and functionality Identify and document electrical deficiencies, code violations, and potential safety hazards Collaborate with contractors, engineers, and project managers to resolve electrical issues and ensure timely project completion Prepare detailed inspection reports and maintain accurate records of all inspections and findings Stay up-to-date with changes in Saudi Arabian and international electrical codes, regulations, and industry best practices Provide expert guidance and recommendations to improve electrical safety and efficiency on project sites Participate in pre-construction meetings to discuss electrical requirements and potential challenges Ensure strict compliance with Saudi Arabian electrical standards and regulations Travel to various project sites within Saudi Arabia as required<br><br><br>Qualifications<br><br>Bachelor's degree in Electrical Engineering or related field Minimum of 10 years of experience in electrical inspection or related field Proficiency in Saudi Arabian and international electrical codes and standards Extensive knowledge of electrical systems and components Strong ability to read and interpret electrical drawings and schematics Proven experience working on construction sites and industrial facilities Expertise in using various testing equipment and inspection tools Excellent problem-solving and analytical skills Strong written and verbal communication skills in English; Arabic language skills are a plus Proficiency in Microsoft Office and relevant inspection software Meticulous attention to detail with a strong commitment to safety and quality In-depth knowledge of construction industry regulations and safety standards Ability to work efficiently in a fast-paced, dynamic environment Familiarity with Saudi Arabian construction practices and regulations

<p><h4>Design Manager – Hospitality Projects</h4> <p>Leading design delivery for hospitality (hotels, stadiums, museums, hospitals) projects across the Middle East, ensuring alignment with client vision, technical standards, and project requirements. Manages multidisciplinary design teams, coordinates design development, and oversees design reviews, approvals, and integration with construction and procurement processes. Drives design quality, resolves technical challenges, and ensures timely delivery of coordinated, compliant, and buildable design solutions.</p> <p><strong>Key responsibilities include:</strong></p> <ul> <li>Review architectural drawings, reports, and specifications submitted by the design consultants at each stage to ensure completeness, correctness, and compliance with the scope of work and agreement requirements.</li> <li>Carry out constructability reviews during the design and modification stages.</li> <li>Review design consultant submittals in a timely manner and forward comments to the construction manager.</li> <li>Ensure design consultants incorporate comments raised from previous stages.</li> <li>Attend technical meetings with design consultants, sub-consultants, contractors, and client teams.</li> <li>Review proposed design organizations and related CVs and report findings to the construction manager.</li> <li>Coordinate with project managers, document controllers, and QA/QC managers to ensure proper control of all discipline-related documents.</li> <li>Review alternatives to the design concept submitted by design consultants and prepare reports including recommendations highlighting advantages and disadvantages.</li> <li>Review materials proposed by design consultants and suggest alternatives to improve quality, future maintenance, safety, and cost-effectiveness.</li> <li>Review change requests and variations submitted by design consultants.</li> <li>Ensure compliance with relevant quality, environmental, safety, and occupational health policies, manuals, and procedures.</li> <li>Perform other duties as assigned by the line manager or supervisor.</li> </ul> <p><strong>Qualifications and experience:</strong></p> <ul> <li>Minimum of 10-15 years’ experience with architectural design, production techniques, codes, standards, building materials, and construction methods.</li> <li>Previous experience in the field of specialization and knowledge of relevant engineering design principles, practices, methods, and systems.</li> <li>Knowledge of the construction field, regulatory standards, and design standards relevant to architectural work.</li> <li>Excellent verbal and written communication skills.</li> <li>Knowledge of engineering procedures, design guidelines, business automation applications, and administrative aspects.</li> <li>Familiarity with computer-aided design (CAD) software for two- and three-dimensional technology.</li> <li>Experience working internationally, with preference given to Gulf Cooperation Council (GCC) experience.</li> </ul> <p><strong>About the company:</strong></p> <p>Hill International, with more than 4,300 professionals in over 100 offices worldwide, provides program management, project management, construction management, project management oversight, advisory, facilities management, and other consulting services to clients in a variety of market sectors. The company is recognized as one of the largest program management firms globally. Hill International is exclusively a program, project, and construction management provider, focused on protecting client interests and dedicated to exceeding expectations throughout the entire construction project lifecycle. The company adapts to the needs of each assignment to develop tailored approaches and solutions.</p> <p>Hill International is part of the GISI Consulting Group, a family of companies specializing in global infrastructure solutions.</p> <p>Hill International is an equal opportunity employer, including veterans and individuals with disabilities.</p> <p><strong>Note:</strong> This job description is intended to provide an indication of the nature and levels of work, knowledge, skills, abilities, and other essential functions to be carried out as part of fulfilling the role. Various other duties may be required.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>What You'll Be Doing:</b></p><ul> <li> <p>Leads full-time, part-time, and collateral duty project and program SH&amp;E specialists in implementing work plans and the company s risk management practices.</p> </li> <li> <p>Represents the business unit SH&amp;E director on project or program worksites.</p> </li> <li> <p>Advises and assists project manager, program manager and/or other project and program personnel in conforming to Parsons Environmental, Safety, Health, and Risk Program (ESHARP) management system and Parsons policies and procedures.</p> </li> <li> <p>Develops site-specific work plans, SH&amp;E compliance programs, training programs, and orientation plans fully conforming to relevant SH&amp;E regulations, Parsons ESHARP management system, and client requirements.</p> </li> <li> <p>Collaborates with project and program managers to evaluate (sub)contractors SH&amp;E performance, planning, and culture to be consistent with the company s risk management practices and core values.</p> </li> <li> <p>Audits projects and programs and their worksites against corporate standards; creates and submits written audit reports.</p> </li> <li> <p>Inspects worksites to detect hazards and provides expertise to project personnel to eliminate/control the SH&amp;E risks associated with exposure to the hazards; creates and submits written inspection reports.</p></li> <li> <p>Implements Parsons occupational injury and incident reporting and management processes.</p> </li> <li> <p>Initiates and conducts thorough incident investigations and root cause analyses using defensible protocols.</p> </li> <li> <p>Collaborates with project or program managers, craft workers, and other project or program personnel to identify effective corrective actions; creates and submits comprehensive investigation reports and lessons learned.</p> </li> <li> <p>Performs trends analyses on audit findings, inspection findings, and incident reports; creates and submits regular analysis reports.</p> </li> <li> <p>Represents Parsons during external regulatory or loss control inspections of project or program worksites.</p> </li> <li> <p>Assists with risk assessments for upcoming work and provides SH&amp;E subject matter expertise to work planning processes.</p> </li> <li> <p>Seeks active and personal participation from the project or program manager, craft workers, and other project or program personnel to identify SH&amp;E improvements and to implement the improvements.</p> </li> <li> <p>Assists the project or program manager with new hire orientation.</p> </li> <li> <p>Performs regulatory and best practice SH&amp;E training.</p> </li> <li> <p>Creates and maintains SH&amp;E training records.</p> </li> <li> <p>Participates in routine safe work briefings with craft, office, and (sub)contractor workers.</p> </li> </ul> <p><b>What Required Skills You'll Bring:</b></p> <ul> <li> <p>Bachelor's Degree in Occupational Safety and Health or related field (or equivalent experience).</p> </li> <li> <p>10+ years of related work experience in the field of Health and Safety, including some supervisory experience.</p> </li> <li> <p>Certified Safety Professional (CSP) or Certified Industrial Hygienist (CIH) is preferred.</p> </li> </ul> <p><b>What Desired Skills You'll Bring:</b></p> <ul> <li> <p>Extensive knowledge of Federal and State health and safety regulations and reporting procedures.</p> </li> <li> <p>Advanced knowledge of safety-related national consensus standards (e.g., ANSI, NFPA).</p> </li> <li> <p>Exceptional interpersonal, oral, and written communication skills.</p> </li> <li> <p>Ability to perform in a supervisory/managerial capacity.</p> </li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>Job Description:</b></p> <p>Parsons is looking for an exceptionally talented HSE Manager (Saudi National) to join our site team on a major public realm development in Diriyah, which includes a series of iconic and neighborhood parks, open spaces, and over 55 kilometers of streetscape. The objective of this program is to create a vibrant, inclusive environment that enhances livability, accessibility, and community well-being.</p><p></p></section>

<p class="isSelectedEnd"><strong>Job Title:</strong> Content Creator (Saudi National)</p><p class="isSelectedEnd"><strong>Work Location:</strong> Dammam / Khobar</p><p class="isSelectedEnd"><strong>Job Summary:</strong><br>A leading contracting company in Dammam and Khobar is looking for a creative Saudi content creator to join the marketing team, capable of producing professional content that reflects the company's identity and its projects in the contracting and real estate sector, from the planning and writing stage to filming, editing, and publishing.</p><p class="isSelectedEnd"><strong>Job Responsibilities:</strong><br>• Writing creative content for social media platforms.<br>• Preparing ideas and scenarios for visual content.<br>• Filming projects, sites, and events related to the company.<br>• Performing editing tasks and producing videos professionally.<br>• Producing content that highlights the quality of projects and services offered.<br>• Keeping up with the latest trends in content creation and applying them appropriately to the company’s activities.<br>• Coordinating with the marketing team to achieve the brand's marketing objectives.</p><p class="isSelectedEnd"><strong>Requirements:</strong><br>• Saudi National.<br>• Experience in content writing and digital content creation.<br>• Proficiency in photography using professional cameras or smartphones.<br>• Mastery of editing software such as Premiere Pro, CapCut, or equivalent.<br>• Previous experience in the contracting or real estate sector is preferred.<br>• Ability to work on-site and visit project locations.<br>• Possessing a creative sense and high skills in storytelling and content creation.</p><p><strong>Benefits:</strong><br>• Professional work environment.<br>• Opportunity for growth and professional development.<br>• Working on quality projects in the contracting and real estate sector.<br>• Competitive salary and benefits determined based on experience and competence.</p>

Job Summary The Snapchat & Tik Tok Videographer is responsible for creating engaging short-form video content that strengthens the company's digital presence. The role focuses on planning, filming, editing, and producing creative content for Snapchat and Tik Tok while utilizing AI tools and following the latest social media trends.<br>Key Responsibilities Plan, film, and edit engaging short-form videos for Snapchat and Tik Tok. Create creative and trend-driven content that aligns with the company's marketing objectives. Utilize AI-powered tools to enhance video production and content creation. Capture on-site footage of properties, events, and company activities. Collaborate with the Marketing team to develop content ideas and campaigns. Ensure all content aligns with the company's brand identity. Stay up to date with social media trends and platform updates. <br>Qualifications At least 6 months of experience in content creation, videography, or social media content production. Proficiency in Cap Cut or similar video editing software and AI-powered content creation tools. Experience creating content for Snapchat and Tik Tok. Real estate industry experience is a plus. Good command of English.

<b>Join Our Team as a Senior Graphic Designer!</b><br>We are seeking a creative and talented Graphic Designer to become part of our dynamic team at SR Group. In this role, you will have the opportunity to work on exciting projects that enhance our brand's identity and engage our audience.<br><br><b>Responsibilities:</b><ul><li>Design branding materials and corporate identity assets.</li><li>Create social media posts, campaign visuals, and marketing creatives.</li><li>Edit videos and reels.</li><li>Ensure brand consistency across all designs and platforms.</li><li>Collaborate with the marketing team to execute creative ideas and campaigns.</li><li>Prepare designs for both digital and print use.</li></ul><br><b>Requirements:</b><ul><li>Experience in graphic design and branding.</li><li>Strong portfolio showcasing work related to branding and social media.</li><li>Proficiency in: Adobe Photoshop, Adobe Illustrator, Premiere Pro, and After Effects.</li><li>Creativity and strong attention to detail.</li><li>Ability to manage multiple tasks and meet deadlines.</li><li>Capability to handle design projects from concept to execution independently.</li></ul><br><b>Preferred Skills:</b><ul><li>Strong understanding of branding and visual identity systems.</li><li>Knowledge of Arabic &amp; English typography.</li><li>Basic video editing skills and ability to incorporate brand elements into videos.</li><li>Experience working with corporate brands and marketing campaigns.</li><li>Good understanding of social media design trends and content formatting.</li></ul>

<b>Purpose of the Role:</b><br>To lead content quality, establish a unified editorial direction, and oversee the content team to ensure consistency in messaging and excellence in all content deliverables.<br><br><b>Key Responsibilities:</b><ul><li>Develop and maintain the editorial framework and Tone of Voice guidelines, ensuring consistent implementation across all content.</li><li>Review, edit, and approve content produced by the writing team before publication.</li><li>Mentor, support, and develop content writers by providing constructive feedback and guidance.</li><li>Create high-impact and strategic content, including major campaigns, key messaging, and executive communications.</li><li>Participate in campaign planning and develop editorial briefs for marketing initiatives.</li><li>Collaborate closely with design and video teams to ensure message consistency and integrated storytelling.</li><li>Monitor content performance and continuously optimize content strategies based on insights and results.</li></ul><br><b>Qualifications &amp; Skills:</b><ul><li>Extensive experience in content writing, preferably with team leadership or supervisory responsibilities.</li><li>Exceptional writing, editing, proofreading, and content refinement skills.</li><li>Strong coaching and mentoring abilities, with a track record of elevating team performance.</li><li>Deep understanding of content strategy, marketing principles, and platform-specific content requirements.</li><li>Excellent organizational skills with the ability to manage multiple projects and writers simultaneously.</li><li>A strong portfolio demonstrating content quality, creativity, and versatility across different formats and channels.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Head Of Commercial ID 35357 GCC / Saudi Arabia 10-15 Years experience SAR N/A - N/A Package On-site Apply for this job Job Summary: One of our clients in Saudi Arabia is looking for Head of Commercial, responsible for leading commercial planning and customer experience for rail operations, ensuring that commercial products and services are fully aligned with the defined strategy, while driving operational efficiency and revenue optimization in close coordination with relevant stakeholders. Key Responsibilities: Product Definition Client Liaison Demand Analysis &amp; Revenue Management Leadership Yield Management Capacity Planning Business Development (B2B &amp; B2G) Marketing &amp; Brand Strategy Sales System &amp; Commercial Planning Sales Channel Performance &amp; Integration Operational Coordination Requirements: Minimum of 10 years of relevant experience. professional experience in senior commercial, revenue management, sales, marketing, or customer experience leadership roles, preferably within rail, transport, mobility, or large-scale service industries Apply for this job</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum of 10 years of relevant experience. professional experience in senior commercial, revenue management, sales, marketing, or customer experience leadership roles, preferably within rail, transport, mobility, or large-scale service industries</p><p></p></section>

We are looking for a results-driven E-commerce Executive to take ownership of our online store performance and drive conversion, revenue, and customer experience.<br>Key Responsibilities:- Improve conversion rate (CRO) across the website- Optimize product pages (images, copy, structure, offers)- Create and manage bundles, upsells, and offer strategies- Set up and optimize marketing automations:- Abandoned cart recovery- Post-purchase flows (education, upsell, retention)- Improve customer journey from landing → purchase → repeat- Work on email/SMS/Whats App automation flows- Analyze performance (AOV, CVR, funnel drop-offs) and implement improvements- Manage and expand presence on marketplaces:- Noon- Amazon- Coordinate with marketing team (ads, creatives, campaigns)<br>✅ Requirements:- Minimum 3 years experience in e-commerce- Strong experience with Salla (MUST)- Proven experience in:- Conversion rate optimization- Product page optimization- Bundling & offer strategies- Marketing automation tools- Experience with Noon / Amazon / marketplaces- Analytical mindset (data-driven decisions)- Arabic speaking is a plus<br>What We’re Looking For:<br>Someone who can take ownership, not just execute. We need a person who can identify problems, fix them, and drive growth.

Follow the latest industry and design trends to develop innovative content for brands across all platforms. Create original and creative content for web and mobile platforms. Collaborate with creative teams (design, video, and social media) to produce various types of content. Transform marketing content into attractive formats for social media. Work on various digital platforms such as social media, live broadcasting, and augmented reality. Conditions and required skills: Proven experience in creating original content and managing content on social media (such as TikTok, Instagram, YouTube, Twitter). Excellence in at least two areas: scriptwriting, social media copywriting, and user experience writing (UX), or marketing writing. Ability to work under pressure and meet fast deadlines within a team. Passion for creative content, initiative, and the ability to work collaboratively.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Objectives To monitor daily CCTV inspection and sewer-cleaning activities and ensure that all site work is carried out safely and in compliance with Saudi regulations, National Water Company (NWC) HSE requirements, the approved Project HSE Plan, and company procedures, while promptly identifying hazards and reporting unsafe acts and conditions.<br> Roles: Support the QHSE Manager / HSE Focal Point in implementing the Project HSE Plan.<br> Provide continuous safety coverage for assigned field teams and work locations.<br> Promote safe work practices and a positive safety culture among employees and subcontractors.<br> Monitor compliance with company, client, and regulatory HSE requirements.<br> Identify hazards, unsafe acts, and unsafe conditions and ensure immediate corrective action.<br> Coordinate daily safety requirements with supervisors, operators, drivers, and field crews.<br> Report HSE observations, incidents, and repeated violations to the QHSE Manager / HSE Focal Point.<br> Responsibilities: Obtain all required permits from all authorities.<br> Implement site safety procedures and instructions issued under the approved Project HSE Plan.<br> Conduct pre-work and continuous site inspections and immediately report unsafe acts or conditions.<br> Check that required Risk Assessments, JSA, toolbox talks, and valid Permits to Work are available before work starts.<br> Ensure correct use of PPE and proper installation of barricades, warning signs, lighting, housekeeping, and traffic-control arrangements.<br> Monitor high-risk activities including manhole opening, confined-space entry, atmospheric gas testing, lifting of manhole covers, jetting operations, generator use, vehicle movement, and road work.<br> Conduct daily toolbox talks and participate in project HSE induction and awareness activities.<br> Inspect tools, equipment, gas detectors, lifting accessories, vehicles, fire extinguishers, first-aid kits, and emergency equipment before use.<br> Ensure confined-space entry requirements, standby arrangements, communication, and rescue provisions are maintained.<br> Report incidents, near misses, hazards, and environmental observations immediately and assist in investigations when required.<br> Maintain daily inspection checklists, toolbox-talk records, PTW records, observation reports, and corrective-action follow-up logs.<br> Follow up corrective actions with the relevant supervisor until satisfactory closure.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><b>The Future Is What We Make It.</b></span></p><br><p><span>When you join Honeywell, you become a member of our Global team of thinkers, innovators, dreamers and doers who make the things that make the future.</span></p><br><p><span>By changing the way we fly, fueling jets in an eco-friendly way, keeping buildings smart and safe and even making it possible to breathe on Mars.</span></p><br><p><span><b>Make the Best You.</b></span></p><br><p><span>Working at Honeywell is not just about developing cool things. All our employees enjoy access to dynamic career opportunities across different fields and industries.</span></p><br><p><span><b>Join us and Make an Impact.</b></span></p><br><p>Advanced Project Engineer (Security &amp; LC/AV)</p><br><p>Role and Key Responsibilities</p><br><ul> <li>Provide senior-level leadership and technical oversight for complex projects encompassing Security, Low Current (LC), and Audio Visual (AV) systems.</li> <li>Develop and implement comprehensive project plans, ensuring alignment with client specifications, budget constraints, and schedule requirements across all integrated systems.</li> <li>Conduct advanced budget analysis, value engineering, and cost-benefit assessments for integrated Security, LC, and AV solutions, identifying opportunities for optimization and cost savings.</li> <li>Lead the development and deployment of best-in-class engineering processes, procedures, and tools to ensure commissioning excellence, standardization, and continuous improvement for all project phases.</li> <li>Proactively identify, assess, and mitigate project risks related to Security, LC, and AV systems, developing robust contingency plans.</li> <li>Drive system design and engineering efforts, ensuring seamless integration and interoperability between diverse security, LC, and AV technologies.</li> <li>Manage project schedules, milestones, and resource allocation, ensuring timely and efficient project delivery with a focus on positive deviation and team performance.</li> <li>Mentor and manage junior engineering teams, fostering technical growth and ensuring adherence to project standards and best practices.</li></ul><p>Requirement and Skills</p><br><ul> <li>Bachelor's degree in Electrical Engineering, Electronics Engineering, Computer Science, or a closely related technical field.</li> <li>Minimum of 7+ years of progressive experience in project engineering, with significant leadership roles in integrated Security, LC, and AV systems.</li> <li>Demonstrated expertise in reviewing and approving complex shop drawings, technical specifications, and system architectures for multi-disciplinary projects.</li> <li>Extensive experience with a wide range of Honeywell Security systems, including Access Control, CCTV, Intrusion Detection, and associated field control systems.</li> <li>Proven ability to interpret and ensure strict compliance with project specifications, industry standards, and regulatory requirements (e.g., NFPA, local security regulations, AVIXA standards).</li> <li>Advanced experience in configuring, commissioning, and troubleshooting complex integrated systems, including server-side software and front-end applications.</li> <li>Strong background in system design development, including network architecture, power distribution, and signal flow for converged Security, LC, and AV platforms.</li> <li>Competency in advanced calculations, including battery sizing, voltage drop, audio coverage, video resolution, and network bandwidth requirements.</li></ul><p>Customer Satisfaction</p><br><ul> <li>Provide senior-level technical supervision and guidance to customers on-site for integrated Security, LC, and AV systems.</li> <li>Lead technical discussions and site coordination meetings, effectively resolving complex technical challenges and stakeholder concerns.</li> <li>Develop and deliver comprehensive training programs for customer technical and operational staff on the use and maintenance of integrated systems.</li> <li>Oversee system handover processes and secure final customer acceptance for all project deliverables, ensuring complete satisfaction.</li></ul><p><span><b>We Offer:</b></span></p><br><p><span>The opportunity to work on the world’s most exciting projects, transforming the cities we live in, the buildings where we work, and the vehicles that move us.&nbsp;</span></p><br><ul> <li><span>A culture that fosters inclusion, diversity and innovation.</span></li> <li><span>Market specific training and on-going personal development.</span></li></ul><p><span>If this is your dream role, then we'd love to hear from you.</span></p><br><p><span>We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.</span></p><br><p><span>We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.</span></p><br><br><span>Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments – powered by our Honeywell Forge software – that help make the world smarter, safer and more sustainable.</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Nationality"> <b>Nationality</b> </div> <div class="col is-9 p5" data-automation-id="data_Nationality"> Saudi Arabia </div> </div> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>The Future Is What We Make It.</strong></span></p><br><p><span>When you join Honeywell, you become a member of our Global team of thinkers, innovators, dreamers and doers who make the things that make the future.</span></p><br><p><span>By changing the way we fly, fueling jets in an eco-friendly way, keeping buildings smart and safe and even making it possible to breathe on Mars.</span></p><br><p><span><strong>Make the Best You.</strong></span></p><br><p><span>Working at Honeywell is not just about developing cool things. All our employees enjoy access to dynamic career opportunities across different fields and industries.</span></p><br><p><span><strong>Join us and Make an Impact.</strong></span></p><br><p>Advanced Project Engineer (Security &amp; LC/AV)</p><br><p>Role and Key Responsibilities</p><br><ul> <li>Provide senior-level leadership and technical oversight for complex projects encompassing Security, Low Current (LC), and Audio Visual (AV) systems.</li> <li>Develop and implement comprehensive project plans, ensuring alignment with client specifications, budget constraints, and schedule requirements across all integrated systems.</li> <li>Conduct advanced budget analysis, value engineering, and cost-benefit assessments for integrated Security, LC, and AV solutions, identifying opportunities for optimization and cost savings.</li> <li>Lead the development and deployment of best-in-class engineering processes, procedures, and tools to ensure commissioning excellence, standardization, and continuous improvement for all project phases.</li> <li>Proactively identify, assess, and mitigate project risks related to Security, LC, and AV systems, developing robust contingency plans.</li> <li>Drive system design and engineering efforts, ensuring seamless integration and interoperability between diverse security, LC, and AV technologies.</li> <li>Manage project schedules, milestones, and resource allocation, ensuring timely and efficient project delivery with a focus on positive deviation and team performance.</li> <li>Mentor and manage junior engineering teams, fostering technical growth and ensuring adherence to project standards and best practices.</li></ul><p>Requirement and Skills</p><br><ul> <li>Bachelor's degree in Electrical Engineering, Electronics Engineering, Computer Science, or a closely related technical field.</li> <li>Minimum of 7+ years of progressive experience in project engineering, with significant leadership roles in integrated Security, LC, and AV systems.</li> <li>Demonstrated expertise in reviewing and approving complex shop drawings, technical specifications, and system architectures for multi-disciplinary projects.</li> <li>Extensive experience with a wide range of Honeywell Security systems, including Access Control, CCTV, Intrusion Detection, and associated field control systems.</li> <li>Proven ability to interpret and ensure strict compliance with project specifications, industry standards, and regulatory requirements (e.g., NFPA, local security regulations, AVIXA standards).</li> <li>Advanced experience in configuring, commissioning, and troubleshooting complex integrated systems, including server-side software and front-end applications.</li> <li>Strong background in system design development, including network architecture, power distribution, and signal flow for converged Security, LC, and AV platforms.</li> <li>Competency in advanced calculations, including battery sizing, voltage drop, audio coverage, video resolution, and network bandwidth requirements.</li></ul><p>Customer Satisfaction</p><br><ul> <li>Provide senior-level technical supervision and guidance to customers on-site for integrated Security, LC, and AV systems.</li> <li>Lead technical discussions and site coordination meetings, effectively resolving complex technical challenges and stakeholder concerns.</li> <li>Develop and deliver comprehensive training programs for customer technical and operational staff on the use and maintenance of integrated systems.</li> <li>Oversee system handover processes and secure final customer acceptance for all project deliverables, ensuring complete satisfaction.</li></ul><p><span><strong>We Offer:</strong></span></p><br><p><span>The opportunity to work on the world’s most exciting projects, transforming the cities we live in, the buildings where we work, and the vehicles that move us.&nbsp;</span></p><br><ul> <li><span>A culture that fosters inclusion, diversity and innovation.</span></li> <li><span>Market specific training and on-going personal development.</span></li></ul><p><span>If this is your dream role, then we'd love to hear from you.</span></p><br><p><span>We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.</span></p><br><p><span>We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.</span></p><br><br><span>Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments – powered by our Honeywell Forge software – that help make the world smarter, safer and more sustainable.</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a Project Engineer to join our team in Dammam Saudi, to support the successful execution of oil and gas surface infrastructure projects. The ideal candidate will have hands-on experience in reading and interpreting Piping and Instrumentation Diagrams (P&amp;IDs), working with surface production equipment and managing fabrication and installation processes. This role requires strong interaction with clients, engineering teams, quality groups, wellsite employees and vendors to ensure projects meet technical specifications, quality standards and operational requirements.</p> <p>To apply, email resume to hr@upwingenergy.com .</p> Essential Duties and Responsibilities: <ul> <li>Lead and support projects involving the development, fabrication and installation of surface infrastructure for oil and gas applications.</li> <li>Read, interpret and analyze P&amp;IDs, engineering drawings and specifications to ensure proper equipment selection and system integration.</li> <li>Conduct wellsite surveys prior to project execution, assessing site conditions, verifying infrastructure readiness, identifying potential challenges and coordinating with clients, vendors and field personnel to ensure seamless installation and operation of equipment.</li> <li>Work closely with vendors, fabricators and installation teams to ensure compliance with project requirements, industry standards and safety regulations.</li> <li>Collaborate with multidisciplinary teams, including design engineers, procurement specialists and field service teams to streamline project workflows.</li> <li>Ensure all equipment and systems adhere to local regulations, international standards (API, ASME, ISO) and ARAMCO requirements where applicable.</li> <li>Identify potential project risks and develop mitigation strategies to prevent delays or budget overruns.</li> <li>Maintain detailed records of project progress, prepare technical reports and provide regular updates to management, internal and external stakeholders.</li> <li>Interact with customer to ensure safe and efficient field operations.</li> <li>Provide guidance and needed information for the internal engineering team to design required interface equipment when the equipment is not available off-the-shelf.</li> <li>Ensure that third-parties have specified the correct equipment to meet the requirements of safe and efficient operations.</li> <li>Prepare associated cost estimates and control costs for the company throughout the project.</li> <li>Participate in risk assessments before each field operation.</li> <li>Assure adequate third-party Quality Assurance and Quality Control of any equipment for the project.</li> <li>Typically operates as a one-person crew, supervising third-party service company personnel.</li> <li>Record all non-conformances and non-production time and report these to management, internal and external stakeholders.</li> <li>Ensure that all work within the area of responsibility is adequately documented and lessons learned are captured for the benefit of future operations.</li> <li>Provide technical feedback to internal engineering team to improve the safety and performance of the technology.</li> <li>Ensure that all activities comply with company standards and governmental regulations.</li> <li>Collaborate with other members of a multi-disciplinary engineering team to deliver each project efficiently.</li> </ul> Skills, Experience, Education, and Abilities: <ul> <li>BS/MS in Engineering required.</li> <li>Minimum of five years of experience in onshore/offshore completion, production or workover operations.</li> <li>Strong ability to read and interpret P&amp;IDs, isometric drawings and engineering documentation.</li> <li>Experience with the design, selection and integration of surface production equipment.</li> <li>Familiarity with fabrication and installation processes, including welding, material selection and testing procedures.</li> <li>Experience in interacting with customers and third-party vendors.</li> <li>PMP or relevant industry certifications.</li> <li>At least two years of project management or coordination experience. </li> <li>Ability to work with a multi-disciplinary team environment. </li> <li>System integration experience with intelligent completion systems is a plus.</li> <li>Strong written, oral and interpersonal communication skills. </li> <li>Must have highly perceptive listening skills and be open to ideas of others.</li> <li>Extensive knowledge of Well Interventions (slickline, e-line, pumping and coiled tubing), Completions, DST/TCP, Surface Testing and operations is a plus.</li> <li>Experience in ESP and other completion equipment design is a plus but not required.</li> <li>IADC WellSharp or IWCF Well Intervention Pressure Control Certificate a plus.</li> <li>Experience in conducting well on paper, intervention campaigns and/or System Integration Testing (SIT) is a plus.</li> </ul> Intangibles Sought: <ul> <li>Able to take initiative, work with minimal supervision, and stay committed to delivering high-quality results.</li> <li>Thrives in dynamic environments, adapting to shifting project demands with resilience.</li> <li>Communicates complex technical concepts clearly across diverse teams and stakeholders.</li> <li>Works collaboratively, fostering positive relationships with clients, vendors and internal teams.</li> </ul> Physical Demands/Work Environment: <ul> <li>The Project Engineer role requires a combination of office-based work and field visits to fabrication yards, vendor facilities and oilfield wellsites. The position involves extended periods of sitting, standing and walking, as well as the ability to lift up to 25 kg. (55 lbs.) and work in elevated areas or confined spaces. The engineer must be physically capable of wearing required PPE, including hard hats, safety glasses, gloves and steel-toe boots. Fieldwork may expose the individual to varying temperatures, humidity, loud noise, dust, fumes and high-pressure equipment, necessitating strict adherence to safety protocols. Travel to client sites, vendor locations or offshore facilities may be required based on project needs.</li> </ul> Other: <p><br></p></div></section>

We're looking for a Brand & Growth Coordinator to be our in-house engine for brand and marketing execution. Working closely with our marketing agency, you'll act as the key link between strategy and on-the-ground delivery—translating campaigns into action, owning local execution, and making sure every initiative lands on-brand and on-time. This is a hands-on role for someone who thrives on ownership and wants to shape a brand from its earliest stage.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Salla is one of the fastest-growing e-commerce platforms in the MENA region, delivering innovative technology solutions that empower businesses to scale rapidly. As we continue to expand, we are seeking a Category Manager Mahally. As Category Manager, you own what gets featured, analyze what's selling, curate the best products, build the lists for every major campaign, and work with marketing and growth teams closely on campaigns. Your decisions directly impact GMV.</p><p>You Will:</p><ul><li>Build product lists for Ramadan, White Friday, National Day, Eids, Back to School, seasonal campaigns</li><li>Curate top-performing products from Salla merchants to feature</li><li>Spot winning products and merchants, improve listing health overall</li><li>Coordinate with marketing &amp; growth to push campaigns</li><li>Analyze category performance, identify trends, opportunities, gaps</li><li>Monitor competitor marketplaces and adapt strategy</li><li>Own key traffic drivers for your category (Search, Email, SEO, Affiliates)</li><li>Work with CRM team on email segmentation, targeting, product lists.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum 3+ years in category management or marketplace operations on large-scale eCommerce platforms, with a proven ability to drive category performance and GMV growth.</li><li>SKU Management: Experience managing 50,000+ SKUs, including curating top-performing products, maintaining listing quality, and optimizing product visibility for campaigns.</li><li>Data &amp; Analytics: Proficiency in SQL for extracting and analyzing your own data, with experience using analytics/BI tools such as Metabase, Looker, or equivalent. Able to generate insights to inform category decisions.</li><li>Traffic &amp; Marketing: Demonstrated knowledge of key traffic-driving mechanisms, including Search, Email, SEO, and Affiliates, and ability to coordinate campaigns with marketing and growth teams to maximize engagement and GMV.</li><li>Consumer &amp; Market Insight: Strong understanding of consumer behavior and market dynamics, with the ability to analyze category performance, identify trends, opportunities, and gaps, and adapt strategies based on competitor activity.</li><li>Language: Proficiency in both Arabic and English, spoken and written.</li></ul><p></p></section>

<p>The Senior Architect will be part of the PMC team responsible for overseeing architectural works during the post-contract stage of the Sports Boulevard Project in Riyadh. The role will focus on reviewing contractor submissions, conducting site inspections, ensuring compliance with project requirements, and supporting ongoing design coordination activities. The successful candidate will act as a key client-facing representative and provide technical leadership throughout the construction phase.</p><p>Review and provide technical comments on MAR's architectural shop drawings and related submissions. Review material submittals, method statements, RFIs, and architectural technical documentation. Conduct regular site inspections to verify compliance with approved drawings, specifications, and quality standards. Monitor architectural works during construction and identify design or execution-related issues. Coordinate with contractors, consultants, and project stakeholders to resolve technical matters. Support ongoing design development and design coordination during the construction phase. Participate in progress meetings, technical workshops, and coordination sessions. Prepare inspection reports, technical assessments, and project updates. Deliver ad-hoc presentations to clients and senior project stakeholders as required. Ensure architectural works are executed in accordance with project requirements, design intent, and applicable standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Architecture. Minimum 12+ years of relevant experience in architectural design, construction supervision, and project delivery. Strong experience working within PMC/PMCM environments on major development projects. Proven post-contract experience with exposure to projects where design activities continue during construction. Extensive experience reviewing MAR/Contractor shop drawings and technical submissions. Strong construction supervision and site inspection experience. Client-facing experience with the ability to confidently engage senior stakeholders. Excellent presentation and communication skills, including the ability to prepare and deliver ad-hoc presentations. Proficiency in AutoCAD and architectural drawing review processes. Strong understanding of construction methodologies, architectural detailing, quality assurance, and project coordination.</p>

About the Company MACNA, a wholly Saudi-owned company and a key member of the Al Blagha Group, has been a leading provider of marine mobility solutions since 1995. The company specialises in passenger and cargo transportation and operates a fleet of more than 30 specialised vessels, including high-speed passenger ferries and landing craft. MACNA is recognised as a trusted partner in the Kingdom of Saudi Arabia, delivering safe, reliable, and customer-focused marine transportation services. Its reputation is built on decades of operational experience, technical expertise, and a strong commitment to safety, quality, and continuous improvement.<br>About the Role You will be joining a new project team where the company Is providing a total marine logistics solution, including High Speed Craft, Cargo vessels and Port Operations. As part of the team the HSEQ Manager is responsible for leading the company's Quality, Health, Safety, Environment (HSEQ), and Security functions across both marine and shore-based operations. The role ensures that MACNA's management systems are effectively implemented, statutory and client requirements are met, and a strong safety culture is maintained throughout the organisation.<br>Responsibilities Leadership & Safety Management Lead the implementation of the company's Integrated Management System (IMS). Promote a proactive safety culture across all vessels and shore facilities. Manage HSEQ personnel and mentor operational teams. Act as the company's safety representative with clients, regulators, and classification societies.<br>Incident Investigation & Risk Management Lead investigations into incidents and non-conformities. Conduct root cause analysis and ensure corrective and preventive actions are implemented. Monitor trends in HSEQ performance and recommend improvement initiatives. Develop and oversee risk assessments and hazard management programmes.<br>Compliance & Auditing Ensure compliance with the following:ISO 9001, ISO 14001, ISO 45001Applicable maritime statutory and classification requirements. Conduct vessel and shore-based audits and inspections. Coordinate external audits and regulatory surveys.<br>Training & Continuous Improvement Develop and deliver HSEQ training programmes. Organise safety campaigns, toolbox talks, HSEQ flashes, and emergency drills. Monitor Key Performance Indicators (KPIs) and report findings to senior management. Drive continual improvement of policies, procedures, and management systems.<br>Operational Support Ensure fleet certification remains compliant with statutory and classification requirements. Coordinate with operations, technical teams, procurement, suppliers, and vessel crews on safety-critical issues. Support maintenance of lifesaving appliances (LSA), firefighting equipment (FFE), radio equipment, and other critical safety systems.<br>Decision-Making Authority The HSEQ Manager has authority to:Resolve operational safety and environmental issues. Direct HSEQ-related activities across vessels and shore operations. Lead post-incident investigations. Manage departmental expenditure within approved budgets. Supervise direct and indirect HSEQ personnel. Matters involving legal vessel operation, major HSEQ risks, disciplinary action, or expenditure beyond delegated authority require consultation or approval from senior management.<br>Qualifications Bachelor’s degree in occupational health & safety, Environmental Science, Marine Engineering, or a related discipline. Professional certification such as NEBOSH, IOSH, or OSHA. Minimum 5 years of HSEQ experience, preferably within the marine or maritime industry. Experience implementing and maintaining ISO management systems.<br>Required Skills Strong knowledge of maritime safety regulations and environmental legislation. Expertise in risk assessment and incident investigation. Leadership and people management capability. Excellent communication and stakeholder management skills. Experience with HSEQ management systems and reporting software. Strong analytical, problem-solving, and report-writing abilities.