Factory Jobs - Jubail Saudi
732 Jobs Found
Save and set alert for similar positionsManage alerts
<h3>About Bechtel Corporation and the Jubail Project</h3><p>Bechtel Corporation has been instrumental in the development of Jubail, one of the largest civil engineering projects in modern times, located in the Eastern Province of Saudi Arabia. Since the mid-1970s, Bechtel has managed this significant project, which continues to expand. Saudi Arabian Bechtel Company (SABCO) operates as the Management Services Contractor for the Royal Commission, overseeing engineering, procurement, and construction. The scope includes managing design submissions and supervising construction work by local contractors in Jubail and Ras Al-Khair Industrial Cities. The contract was renewed in June 2026 for another five years, focusing on new residential communities, infrastructure, and various public facilities.</p><h3>Role Summary: Area Safety Engineer</h3><p>The Area Safety Engineer reports to the Lead Safety Engineer or the Project ESH Manager. This full-time role is based in Al Jubail and involves conducting project-wide Environmental, Safety, and Health (ES&H) initiatives and providing essential technical support across various construction activities. The position requires 5-10 years of relevant experience.</p><h3>Key Responsibilities</h3><ul><li>Conduct project-wide ES&H initiatives, including vehicle inspection campaigns, focused assessments of contract work sites (*, work at height, chemical storage, traffic management, environmental inspections, scaffolding, PPE, excavations).</li><li>Provide technical support and review client contractor method statements and risk assessments.</li><li>Offer safety technical support and assistance to contract projects during site visits.</li><li>Participate in meetings with customers, project construction colleagues, and client contractors/subcontractors to advise on safety requirements.</li><li>Provide recommendations and input for revising safety procedures, work processes, and other improvement measures.</li><li>Conduct safety inspections/assessments of project construction activities to monitor compliance with applicable safety and health requirements, contractual commitments, permits, and the project’s ES&H Manual. Produce detailed reports on corrective actions.</li><li>Develop and deliver training presentations as required.</li><li>Undertake additional duties as assigned by the Lead Safety Engineer and Project ESH Manager.</li></ul><h3>Qualifications and Experience</h3><ul><li>College/University degree in a subject relevant to Management of ESH from an accredited institution.</li><li>Minimum of 5 years of relevant work experience in the construction industry or related fields, demonstrating a thorough understanding of the role requirements.</li><li>Demonstrated experience in implementing all aspects of Construction ESH Management.</li><li>Experience in conducting safety inspections/assessments of project construction activities to monitor compliance with ES&H requirements.</li><li>NEBOSH / International General Certification preferred, or a similar internationally recognized ESH certification.</li><li>Experience working with construction contractors to ensure ESH standards are understood and complied with.</li><li>Knowledge of hazardous materials, physical risk exposures, Personal Protective Equipment standards, and People Based Safety (behavioral safety) processes and procedures.</li><li>Experience in managing and/or providing technical oversight of safety and/or health subcontractors or consultants.</li><li>Knowledge of engineering and construction systems, methods, and work processes.</li></ul><h3>Required Skills</h3><ul><li>Excellent communication and interpersonal skills to explain ESH-related work processes and standards to contractors.</li><li>Ability to prepare ESH training presentations and deliver training sessions effectively.</li><li>Capability to work within a culturally diverse organization, recognizing and respecting differences.</li><li>Self-motivated with good leadership skills and the ability to influence without direct authority.</li><li>Demonstrated ability to influence key stakeholders in critical decision-making.</li><li>Ability to work effectively within an integrated RC/Bechtel team across multiple levels, from working staff to Project Manager.</li><li>Effective communication skills for delivering presentations to diverse groups, from senior managers to field workers, ensuring key messages are received.</li><li>Knowledge of national and international environmental laws/regulations, industry standards for environmental compliance, and best management practices for minimizing environmental impacts during project execution.</li><li>Knowledge of construction planning and execution.</li><li>Experience in environmental monitoring and compliance inspection during construction.</li><li>Knowledge of hazardous materials and waste management, erosion and sediment control methods, and restoration techniques.</li></ul><h3>Work Environment</h3><p>This role is a full-time position based in Al Jubail, Eastern Province, Saudi Arabia, supporting the ongoing development and expansion of the Jubail project.</p>
<ul><li>Proactive rather than reactive. Highlight any issues or problems upfront to the management so as to help take remedial action on time</li><li> Active participation in progress review meetings, technical meetings, client meetings, and vendor meetings</li><li> Support Procurement-related activities by assisting other disciplines in their preparation of Material requisitions (MR), Technical Bid Clarification/Evaluation (TBC/ TBE)</li><li> Support bidding team by assisting other disciplines in their preparation of RFQs and technical evaluation of bids</li><li> Support construction by responding to construction site-related technical queries (TQ)</li><li> Review and comment on GES plus engineering deliverables on a case-by-case basis</li><li> Ensuring safety and quality of deliverables</li><li> Participate in Value engineering practices such as value engineering, lessons learned sessions, Risk<br><br></li></ul>Assessment/Management Studies and workshops, constructability studies and workshops<br><br><ul><li> Ensure Customer satisfaction and appreciation, and build on the company's reputation and image, thereby facilitating repeat orders and goodwill<br><br></li></ul><strong>Requirements<br><br></strong><ul><li> 10-15 years combined experience in Oil and Gas, Petrochemicals, Power Industry</li><li> Experience working with GES plus/ EPC Contractors on Saudi Aramco jobs, SABIC and other reputed organisations</li><li> Experience as a support team during Pre-Commissioning activities</li><li> Bachelor's degree in engineering (BS, BE or B Tech ) in Chemical</li></ul>
<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3>
<p style="margin:0 0 12px; ************;">JAL International Co. Ltd. is seeking a <strong style="font-weight:700;">Business Planning Analyst/Specialist</strong> to join their team in Al Jubail, Eastern Province. This is a contract position requiring 5-10 years of relevant experience. The role focuses on business planning, budgeting, performance management, and reporting within industrial and manufacturing environments.</p>
<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3>
<ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;">
<li style="margin:0 0 6px;">Develop business objectives and performance measures.</li>
<li style="margin:0 0 6px;">Manage business planning, budgeting, and performance reporting processes.</li>
<li style="margin:0 0 6px;">Prepare professional board and executive reports, including graphics and dashboards.</li>
<li style="margin:0 0 6px;">Develop and implement procedures and templates for business planning and reporting.</li>
<li style="margin:0 0 6px;">Build and maintain performance databases for corporate functions.</li>
</ul>
<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Required Experience and Skills</h3>
<ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;">
<li style="margin:0 0 6px;">Extensive experience in business planning, budgeting, performance management, and reporting.</li>
<li style="margin:0 0 6px;">In-depth knowledge of business objectives development and performance measurement.</li>
<li style="margin:0 0 6px;">Experience within the oil/gas, chemical, petrochemical, food, or feed industries.</li>
<li style="margin:0 0 6px;">Proficiency in SAP for business planning and reporting.</li>
<li style="margin:0 0 6px;">Strong knowledge and experience in developing procedures and templates.</li>
<li style="margin:0 0 6px;">Good understanding of Total Quality Management (TQM) and auditing practices.</li>
<li style="margin:0 0 6px;">Excellent skills in MS Windows and presentation software.</li>
</ul>
<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">General Requirements</h3>
<ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;">
<li style="margin:0 0 6px;">Candidates must possess strong and relevant experience within industrial, manufacturing, petrochemical, or similar project environments.</li>
<li style="margin:0 0 6px;">Applicants must be locally available in Saudi Arabia.</li>
<li style="margin:0 0 6px;">The job location is Jubail Industrial City.</li>
</ul>
<p>We are looking for a <strong>Mechanical Supervisor - Piping </strong>with the following details : </p><br><p>Work Location : Jubail, Saudi Arabia </p><p>Duration : 12 months </p><p>Work Status : Residential </p><br><br><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualifications and Requirements</strong></p><ul><li><p>Graduate of Bachelor of Science in Mechanical Engineering or a related technical course.</p></li><li><p>With at least 10 years of experience in mechanical piping construction, installation, and supervision.</p></li><li><p>At least 2–3 years of experience in a supervisory or leadership position.</p></li><li><p>Experience in Refinery / Petrochemical preferable in Middle East Oil & Gas industry.</p><br></li></ul><br>
<h3>About KBR and the Role</h3><p>KBR Sustainable Technology Solutions (STS) delivers comprehensive solutions across the entire asset lifecycle, encompassing licensed process technologies, advisory services, technical expertise, energy transition solutions, high-end design capabilities, and smart solutions for optimizing assets. KBR is seeking a <strong>Fabricator I</strong> to manage and execute piping fabrication activities safely and efficiently, aligning with plant requirements. This full-time position is based in Al Jubail, Eastern region, requiring 5-10 years of relevant experience.</p><h3>Role Overview</h3><p>The Fabricator I will be responsible for the organization and execution of piping fabrication tasks. This involves ensuring all activities adhere to safety standards and operational needs, both within the workshop and in the field. The role requires meticulous attention to detail in following technical specifications and maintaining quality compliance throughout the fabrication process.</p><h3>Key Responsibilities</h3><ul><li>Fabricate required piping or layouts according to job instructions, drawings, material specifications, and supervisor's technical references.</li><li>Set up, align, and operate heavy-duty specialized workshop tools for cutting, threading, and grooving various types of pipes and joints.</li><li>Organize necessary resources, including materials and equipment, for pipe fabrication work.</li><li>Ensure all pipe fabrication complies with quality specifications.</li><li>Execute fabrication tasks both at the designated site and in the field.</li><li>Monitor and track the progress of ongoing pipe fabrication jobs.</li><li>Log all progress related to pipe fabrication and report to the pipefitter supervisor.</li><li>Support investigation efforts for failure analysis of piping circuits.</li></ul><h3>Qualifications and Experience</h3><ul><li>A minimum of 8 years of experience in Oil & Gas maintenance with a High School diploma.</li><li>Alternatively, a minimum of 6 years of experience in Oil & Gas maintenance with a Diploma.</li><li>Hold a valid certification issued by a recognized third-party certification body or an accredited Saudi institute, attesting to the individual’s qualifications and competency for the required works.</li></ul><h3>Work Environment</h3><p>This is a full-time position within the KBR team, located in Al Jubail, Eastern region. The role involves working both in a workshop setting and directly in the field to execute fabrication tasks.</p><h3>Application Process</h3><p>Candidates who meet the qualifications and are interested in this Fabricator I position are encouraged to apply. Salary details for this role will be disclosed during the interview process.</p>
<p><span>We are currently hiring </span><strong><span>Mechanical Engineers / Senior Mechanical Engineers</span></strong><span> with strong </span><strong><span>Shutdown / Turnaround (SD/TA)</span></strong><span> experience for an upcoming opportunity in </span><strong><span>Saudi Arabia</span></strong><span>.</span></p><p><strong><span>Position:</span></strong><span> Mechanical Engineer / Senior Mechanical Engineer – Shutdown & Turnaround<br></span><strong><span>Location:</span></strong><span> Saudi Arabia<br></span><strong><span>Department:</span></strong><span> Plant Service / Mechanical<br></span><strong><span>Vacancies:</span></strong><span> 50<br></span><strong><span>Salary:</span></strong><span> SAR 4,000–7,000 Basic + FAT<br></span><strong><span>Experience:</span></strong><span> 5–10 years</span></p><span>Key Requirements:</span><ul><li><p><span>Bachelor’s Degree in </span><strong><span>Mechanical Engineering</span></strong><span>.</span></p></li><li><p><span>Minimum </span><strong><span>5–10 years of relevant experience</span></strong><span> in Mechanical Maintenance / Shutdown / Turnaround projects.</span></p></li><li><p><strong><span>Mandatory Shutdown / Turnaround experience</span></strong><span>, preferably with a contractor.</span></p></li><li><p><span>Strong experience in </span><strong><span>Mechanical Static Equipment</span></strong><span>, especially:</span></p><ul><li><p><span>Heat Exchangers</span></p></li><li><p><span>Columns</span></p></li><li><p><span>Pressure Vessels</span></p></li><li><p><span>Reactors</span></p></li><li><p><span>Pipelines</span></p></li></ul></li><li><p><span>Experience in shutdown planning, execution, maintenance and coordination.</span></p></li><li><p><strong><span>Primavera P6 experience</span></strong><span> is required.</span></p></li><li><p><span>Candidates should have good </span><strong><span>English communication skills</span></strong><span>.</span></p></li><li><p><span>Relevant experience must be clearly mentioned in the </span><strong><span>CV and supported by experience certificates/letters</span></strong><span>.</span></p></li></ul> <br> <span>Important:</span><p><span>Only candidates with </span><strong><span>genuine and verifiable Shutdown / Turnaround experience</span></strong><span> will be considered.</span></p>
<p><span>We are currently hiring </span><strong><span>Mechanical Engineers / Senior Mechanical Engineers</span></strong><span> with strong </span><strong><span>Shutdown / Turnaround (SD/TA)</span></strong><span> experience for an upcoming opportunity in </span><strong><span>Saudi Arabia</span></strong><span>.</span></p><p><strong><span>Position:</span></strong><span> Mechanical Engineer / Senior Mechanical Engineer – Shutdown & Turnaround<br></span><strong><span>Location:</span></strong><span> Saudi Arabia<br></span><strong><span>Department:</span></strong><span> Plant Service / Mechanical<br></span><strong><span>Vacancies:</span></strong><span> 50<br></span><strong><span>Salary:</span></strong><span> SAR 4,000–7,000 Basic + FAT<br></span><strong><span>Experience:</span></strong><span> 5–10 years</span></p><span>Key Requirements:</span><ul><li><p><span>Bachelor’s Degree in </span><strong><span>Mechanical Engineering</span></strong><span>.</span></p></li><li><p><span>Minimum </span><strong><span>5–10 years of relevant experience</span></strong><span> in Mechanical Maintenance / Shutdown / Turnaround projects.</span></p></li><li><p><strong><span>Mandatory Shutdown / Turnaround experience</span></strong><span>, preferably with a contractor.</span></p></li><li><p><span>Strong experience in </span><strong><span>Mechanical Static Equipment</span></strong><span>, especially:</span></p><ul><li><p><span>Heat Exchangers</span></p></li><li><p><span>Columns</span></p></li><li><p><span>Pressure Vessels</span></p></li><li><p><span>Reactors</span></p></li><li><p><span>Pipelines</span></p></li></ul></li><li><p><span>Experience in shutdown planning, execution, maintenance and coordination.</span></p></li><li><p><strong><span>Primavera P6 experience</span></strong><span> is required.</span></p></li><li><p><span>Candidates should have good </span><strong><span>English communication skills</span></strong><span>.</span></p></li><li><p><span>Relevant experience must be clearly mentioned in the </span><strong><span>CV and supported by experience certificates/letters</span></strong><span>.</span></p></li></ul> <br> <span>Important:</span><p><span>Only candidates with </span><strong><span>genuine and verifiable Shutdown / Turnaround experience</span></strong><span> will be considered.</span></p>
<h3>About Sadara Chemical Company</h3><p>Sadara Chemical Company, located in Al Jubail, Eastern Region, is seeking a <strong>Corporate ERM & Business Continuity Specialist II</strong>. This full-time role is integral to supporting the company's enterprise risk management and business continuity initiatives, ensuring organizational resilience and compliance.</p><h3>Role Overview</h3><p>The Corporate ERM & Business Continuity Specialist II will contribute to the development, implementation, and continuous improvement of Sadara's Enterprise Risk Management (ERM) Framework and Business Continuity Management (BCM) program. The specialist will work collaboratively across various business units to foster a proactive risk culture and ensure robust governance structures are in place.</p><h3>Key Responsibilities</h3><ul><li>Support the annual refresh and execution of the ERM Framework and Roadmap, including facilitating risk workshops and updating documentation.</li><li>Assist in maintaining and updating ERM Framework, policies, and procedures to align with organizational objectives and regulatory requirements.</li><li>Contribute to the development and implementation of risk management and corporate governance programs.</li><li>Collaborate with business units to standardize risk assessment documentation and reporting.</li><li>Work with key functions (IT, Finance, Operations) to monitor and manage risks and ensure compliance with mitigation strategies.</li><li>Assist in preparing materials for management and board-level risk committees, ensuring accurate reporting.</li><li>Build cross-functional relationships to facilitate effective risk identification, assessment, and mitigation.</li><li>Support the preparation and delivery of risk and business continuity reports for regulatory entities and senior management.</li><li>Assist in the development and deployment of risk and regulatory compliance programs.</li><li>Work with business owners to ensure adequate risk controls and testing are in place, validating effectiveness and recommending improvements.</li><li>Support the preparation of annual risk briefings for the Board of Directors.</li><li>Assist in the development, implementation, and improvement of the Business Continuity Management (BCM) program, including creating and reviewing continuity plans.</li><li>Coordinate and document business impact analyses (BIA) and continuity risk assessments.</li><li>Participate in planning, execution, and documentation of business continuity exercises and simulations.</li><li>Support crisis management and incident response activities during disruptive incidents.</li><li>Assist in the development and delivery of training and awareness programs for preparedness and resilience.</li><li>Prepare regular reports to management on business continuity readiness and improvement initiatives.</li><li>Monitor emerging risks, threats, industry trends, and best practices in ERM and business continuity.</li></ul><h3>Required Experience</h3><ul><li>Candidates should possess between <strong>5 to 10 years</strong> of relevant professional experience.</li></ul><h3>Work Environment and Type</h3><p>This is a <strong>full-time</strong> position based in <strong>Al Jubail</strong>, within the Eastern Region. The role involves working collaboratively across various departments and with senior management.</p><h3>Application Process</h3><p>Further details regarding the application process and salary will be disclosed to qualified candidates.</p>
<h3><strong>About the Role</strong></h3><p>HUDSON is seeking an experienced <strong>Machining Skilled Operator</strong> specializing in Horizontal Turning Lathe (HTL) operations. This full-time position is based in Al Jubail and requires 2-5 years of relevant experience. The role focuses on heavy-duty industrial machining, particularly with long-bed CNC machines.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Set up and operate long-bed CNC Horizontal Turning Lathes (HTL).</li><li>Operate manual steady rests and tailstock, preferably on machines up to 12 metres in length.</li><li>Read and interpret engineering drawings, dimensions, and tolerances.</li><li>Perform basic CNC program editing using Fanuc controls.</li><li>Maintain dimensional accuracy, quality standards, and production targets.</li><li>Troubleshoot basic machining and tooling issues.</li><li>Operate overhead cranes safely.</li></ul><h3><strong>Required Skills and Experience</strong></h3><ul><li>3-5 years of experience in machining operations.</li><li>Proficiency in setting up and operating long-bed CNC Horizontal Turning Lathes (HTL).</li><li>Hands-on experience with manual steady rests and tailstock.</li><li>Ability to read and interpret engineering drawings, dimensions, and tolerances.</li><li>Knowledge of Fanuc controls and basic CNC program editing.</li><li>Understanding of cutting tools, inserts, tool offsets, and machining parameters.</li><li>Experience machining castings, forgings, and heavy-duty components.</li><li>Proficiency in using precision measuring instruments such as micrometers, Vernier calipers, and bore gauges.</li><li>Knowledge of workplace safety, quality requirements, and 5S practices.</li></ul><h3><strong>Preferred Industry Experience</strong></h3><ul><li>Experience within the Oil & Gas, Marine, and heavy engineering manufacturing sectors.</li><li>Familiarity with API 6A / API 16A components is preferred.</li></ul><h3><strong>Compensation</strong></h3><p>The salary for this position is SAR 3,500, in addition to FAT (Food, Accommodation, and Transportation).</p><h3><strong>Location</strong></h3><p>This position is based in Al Jubail, Saudi Arabia.</p>
<h3><strong>About the Role</strong></h3><p>HUDSON is seeking an experienced Instrument Engineer for a full-time position within a reputable Oil & Gas Company in Saudi Arabia. This role is based in the Eastern Region, with opportunities across cities including Dammam, Al Khobar, Dhahran, Al Jubail, Al-Ahsa, Al Qatif, Ras Tannurah, Al Khafji, and Buqayq. The position requires a professional with 5-10 years of experience in relevant industrial facilities.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Apply strong experience in Reliability Centered Maintenance (RCM), Failure Mode and Effects Analysis (FMEA/FMECA), and Reliability Engineering principles.</li><li>Demonstrate expertise in Instrumentation, Control Systems, and Safety Instrumented Systems (SIS).</li><li>Work with Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), Control Valves, Field Instrumentation, and Calibration processes.</li><li>Participate in RCM, FMEA, HAZOP, and Root Cause Failure Analysis (RCFA) workshops.</li><li>Develop and validate strategies for Preventive Maintenance (PM), Predictive Maintenance (PdM), Condition-Based Monitoring (CBM), Proof Testing, and Calibration.</li></ul><h3><strong>Required Qualifications and Experience</strong></h3><ul><li>A minimum of 8+ years of experience as an Instrument Engineer.</li><li>Proven experience in Oil & Gas, Refinery, Petrochemical, Power, or other Industrial facilities.</li><li>Knowledge of IEC 61511, ISA Standards, Safety Integrity Level (SIL) Studies, and Functional Safety.</li><li>Familiarity with SAP PM is preferred.</li></ul><h3><strong>Compensation</strong></h3><p>The salary for this position ranges from SAR 8,000 to SAR 10,000 per month, commensurate with experience and qualifications.</p><h3><strong>Application Process</strong></h3><p>Interested candidates are invited to apply for this Instrument Engineer position with HUDSON. This is a full-time opportunity to contribute to a leading organization in the Oil & Gas sector.</p>
<h3><strong>About the Role</strong></h3><p>TASNEE is seeking a <strong>Technician IV, Analyzer</strong> to join their team in Al Jubail. This full-time position focuses on maintaining plant process analyzers to ensure accurate measurements and minimize maintenance interruptions. The role involves diagnosing faults, performing preventive and corrective maintenance, and troubleshooting on-site or in the workshop.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Execute scheduled Preventive Maintenance (PM) and Corrective Maintenance (CM) activities in line with plant operation requirements.</li><li>Ensure that on-line analyzer systems perform according to specifications, including response time, accuracy, precision, and Mean Time Between Failure (MTBF).</li><li>Lead efforts in monitoring and procuring calibration standards, parts, and consumable items for analyzers.</li><li>Stay informed about the latest trends and technological advancements in related fields, and network with peers to share technology and leverage problem-solving and prevention expertise.</li><li>Ensure service requests are clearly understood, add value, and align with business, unit, and team goals.</li><li>Perform any job-related activities as requested by the immediate supervisor or manager.</li><li>Comply with EHSS guidelines and overall safety processes.</li><li>Participate in review meetings to identify opportunities for analyzer system performance improvements based on periodic maintenance data and calibration records.</li><li>Communicate regularly with plant personnel to assess team performance and operational status.</li><li>Ensure strict compliance with all approved Responsible Care and TASNEE policies and procedures to align with the company's commitment to sustainable business requirements.</li></ul><h3><strong>Experience Required</strong></h3><p>Candidates should possess <strong>8 years of relevant experience</strong> in analyzer maintenance and troubleshooting.</p><h3><strong>Work Environment and Location</strong></h3><p>This is a full-time position based in <strong>Al Jubail</strong>.</p>
<h3>About the Role</h3><p>FNRCO is seeking a <strong>Fabricator Multi Tasked</strong> to join their team in Al Jubail, Eastern Province. This full-time position is suitable for individuals with 0-1 years of experience who are looking to contribute to workshop operations and maintain a safe working environment.</p><h3>Key Responsibilities</h3><ul><li>Perform fabrication, cutting, fitting, assembly, and other assigned workshop tasks.</li><li>Operate material-handling equipment, including forklifts, hoists, and other lifting tools, safely and efficiently.</li><li>Inspect, maintain, and ensure that material-handling equipment, machinery, and tools are kept in good working condition.</li><li>Strictly follow company HSE policies, safety regulations, and safe work procedures during all operations.</li><li>Assist with loading, unloading, receiving, moving, and organizing materials within the warehouse.</li><li>Ensure proper housekeeping and maintain a clean, safe, and organized working environment.</li></ul><h3>Required Experience</h3><p>Candidates should possess 0-1 years of experience in a relevant field, demonstrating foundational skills in fabrication and workshop operations.</p><h3>Work Environment</h3><p>This is a full-time position based in Al Jubail. The role involves working within a workshop and warehouse setting, requiring adherence to safety protocols and active participation in maintaining an organized workspace.</p><h3>Application Process</h3><p>The salary for this position will be disclosed during the interview process. Interested candidates are encouraged to apply to join FNRCO in Al Jubail.</p>
<ul><li>Responsible for planning, scheduling, monitoring and controlling all engineering activities of the Mechanical Discipline</li><li> Interdisciplinary coordination and support team building exercise</li><li> Proactive rather than reactive. Highlight any issues or problems in front of the management in advane so as to help take remedial action promptly</li><li> Active participation in progress review meetings, technical meetings, client meetings, and vendor meetings</li><li> Support Procurement-related activities such as raising Material requisitions (MR), Technical Bid<br><br></li></ul>Clarification/Evaluation (TBC/ TBE), Draft Purchase Requisitions<br><br><ul><li> Support bidding team by raising RFQs, Technical evaluation of bids, and cost estimate</li><li> Support construction by responding to construction site-related technical queries (TQ)</li><li> Review and comment on GES plus engineering deliverables on a case-by-case basis</li><li> Ensure deliverables meet safety and quality requirements</li><li> Participate in Value engineering practices such as value engineering, lessons learned sessions, Risk</li><li>Assessment/Management Studies and workshops, Constructability studies and workshops</li><li> Ensure Customer satisfaction and appreciation<br><br></li></ul><strong>Requirements<br><br></strong><ul><li> Bachelor's degree in engineering (BS, BE or B Tech ) in Electronics or Instrumentation</li><li> 10-15 years combined experience in Oil and Gas, Petrochemicals, Power Industry</li><li> Experience working with GES plus/ EPC Contractors on Saudi Aramco jobs, SABIC and other reputed organizations</li><li> Experience of attending FAT/SAT activities</li><li> Experience as support to Pre-Commissioning activities</li></ul>
<h3>About the Role</h3><p>eXtra is seeking a <strong>Sales Consultant</strong> to join its team in Al Jubail. This is a full-time position focused on enhancing customer satisfaction and contributing to the store's sales performance and profitability. The role ensures a consistent shopping experience that aligns with company standards.</p><h3>Role Overview</h3><p>The Sales Consultant plays a key role in supporting the overall success of the store. This involves direct interaction with customers to meet their needs, actively participating in sales activities, and maintaining the visual appeal of the store. The consultant also contributes to operational efficiency through inventory management and adherence to safety protocols.</p><h3>Key Responsibilities</h3><ul><li>Focus on customer needs to ensure high levels of satisfaction.</li><li>Drive sales of products and services offered by the store.</li><li>Implement and maintain visual merchandising standards.</li><li>Adhere to all safety and security procedures.</li><li>Assist with inventory management tasks.</li><li>Engage in continuous self-development to enhance professional skills.</li></ul><h3>Work Environment</h3><p>This full-time position is based in Al Jubail, operating within a retail store environment. The role requires active participation in daily store operations and direct engagement with customers and team members.</p><h3>Application Process</h3><p>Candidates interested in this Sales Consultant position are encouraged to apply. Further details regarding the application process will be provided upon inquiry.</p>
<p>Al Jomaih Energy & Water (AEW) headquartered in Saudi Arabia, is a fast-growing investor, lead developer, and operator of utility and infrastructure projects in various geographical markets such as KSA, GCC, Asia & North Africa, with investments in 6 GW of Conventional and Solar power plants, and around 700,000 m3/day of water. </p><p>AEW was established in 2007, as a subsidiary of Al Jomaih Holding Company, a leading Saudi conglomerate with a legacy spanning over 80 years, focused on enabling sustainable, social, and economic progress in the Kingdom of Saudi Arabia and beyond. </p><p>At AEW, our mission is to tackle new technologies, solve complex problems, and leverage our expertise to unlock opportunities in the Power, Renewables & Water Sectors, while driving impact for our stakeholders across the value chain.<br></p><p><strong>Location: </strong>Jubail, Saudi Arabia</p><p><strong>Duration:</strong> 2.5 to 3 years</p><p><strong>Reporting Structure: </strong>Executive Managing Director (SPV) & Chief Construction Officer-AEW<br></p><p><strong>Overview</strong></p><p>This is an independent steam and power plant (ISPP) project will have a capacity for 400MW-450MW of combined-cycle electricity generation and 550-700 tonnes an hour of steam. The project will also include gas turbines and a back-pressure steam turbine, as well as facilities for steam production.</p><p>To lead and oversee all construction activities for the Sadara Cogen Project. Ensuring the timely, on-budget, and quality delivery of the asset, meeting contractual requirements, and design specifications for reliable and sustainable operation over the Power Purchase Agreement period.</p><p>Implementing the HSSE program and supervision in the Project Company and Owner's team, fostering a culture of health, safety, security, and environment in alignment with Project Company and Stakeholder targets.</p><p>Monitoring, coordinating, and reporting on multiple Contractors' activities at the site, challenging and negotiating with the EPC contractor when necessary to protect the Project Company's interests.</p><p>Leading a highly skilled team and directing the Owner's Engineer to ensure seamless construction with highest levels of HSSE within the necessary quality, time and budget.</p><p>Facilitating seamless communication and information exchanges among stakeholders, including project partners, local communities, and external parties.<br></p><p><strong>Your Job Functions (Duties & Responsibilities)</strong></p><ul><li> Oversee plant construction to ensure compliance with quality, schedule, and budget agreements.</li><li> Manage HSSE implementation onsite and offsite, maintaining a strong HSSE culture.</li><li>Coordinate activities of the Owner's Engineer, local contractors, local authorities and interface partners and Contractors.</li><li>Monitor and enforce EPC Contractor's compliance with EPC Contract, Owners' requirements and International Standards</li><li>Act as the primary link between the off-taker, Owner's Engineer, EPC Contractor, third party, the Operator, --etc to align battery limits and tie-ins.</li><li>Align technical and schedule interfaces between different contractors, ensuring contract conformity and project needs.</li><li>Monitor Engineering & Procurement, QA/QC and OE ensuring the EPC Contractor issuing the engineering packages and deliver procurement items ahead of construction needs.</li><li>Organize and lead construction and progress management meetings with all stakeholders.</li><li>Monitor the availability of all permits required for construction on time and lead the coordination between all Stakeholders for any construction activities in the brown field.</li><li>Identify, assess, and escalate technical deviations, construction risks, and non-conformities to the Project Company EMD, proposing effective mitigation and recovery measures.</li><li>Manage contractual, commercial, and technical matters arising under the EPC Contract and PPA, in coordination with legal and commercial teams.</li><li>Review, evaluate, and provide recommendations on change orders, variations, and claims submitted by contractors and service providers. </li><li>Lead resolution meetings for technical and construction issues encountered on-site and off-site during execution.</li><li>Lead QA/QC oversight and manage the SPV engineering teams including the Owner's Engineer to witness, verify, and document key inspections and tests in accordance with the approved Inspection and Test Plans (ITPs) and project requirements. </li><li>Lead risk assessment and risk identification workshops with the EPC Contractor and Owner's Engineer, ensuring all project risks are identified, formally recorded in the risk register periodically, and supported by clear mitigation and action plans.</li><li>Interact with Sponsors, Lender's Engineer, Insurance Advisers, and O&M teams.</li><li>Issue progress reports and technical memoranda as required.</li><li>Supervise milestone completion certificates, invoices, and mechanical completion certificates.</li><li>Lead/participate as required in technical review committees as they may be defined during the construction period with sponsors.</li><li>Facilitate the handover of the Project to the O&M Team.</li><li>Host visitors at the site and manage communications with stakeholders.</li></ul><p><strong>Contractual/Commercial</strong></p><ul><li>Timely reporting of contractual/commercial variances and proposing mitigation or alternative solutions</li><li> Assist in writing contractual letters to stakeholders.</li><li>Identify and anticipate deliverables to relevant parties.</li><li>Coordinate progress of commissioning and testing with Off-taker and Dispatch Control Centre.</li><li>Assist in claims management with Contractors and Service Providers.<br></li></ul><p><strong>Qualifications & Skill Sets</strong></p><ul><li> University Degree in Civil, Mechanical, Electrical, or Chemical Engineering.</li><li>Additional qualifications (project management/Construction Management) are preferred</li><li>15 +years of project and site experience in large scale power projects, some in CCGT and/or Cogen projects.</li><li>Extensive knowledge of utilities and construction of Combined Cycle and/or Cogeneration Power Plants.</li><li>Experience in large infrastructure project execution.</li><li>Experience with Turnkey EPC contractors. (with Chinese EPC contractor is preferred)</li><li>Strong technical knowledge and understanding of construction processes, contracts, and international standards.</li><li>Contract/claim management and negotiation skills.</li><li>Familiarity with BOO project structures, project finance documents, EPC contracts, PPAs.</li><li>Excellent communication and reporting skills.</li><li>Ability to work independently and lead teams.</li><li>Strong ethical standards.<br></li></ul><p><strong>Functional interface with</strong>: Sponsors, Lenders' Engineer, Owner's Engineer, EPC Contractor, Off-taker, Government Authorities, Regulators, --etc.</p><p> </p>
<h3>About KBR and the Role</h3><p>KBR, Inc. is seeking a <strong>Fabricator III</strong> to join its team in Al Jubail, Eastern region. This full-time position is within KBR Sustainable Technology Solutions (STS), which delivers comprehensive solutions across the asset lifecycle, including licensed process technologies, advisory services, technical expertise, energy transition solutions, and design capabilities. The Fabricator III will be responsible for organizing and executing piping fabrication activities safely and efficiently based on plant requirements.</p><h3>Key Responsibilities</h3><ul><li>Fabricate required piping or layouts according to job instructions, drawings, material specifications, and technical references provided by the supervisor.</li><li>Set up, align, and operate heavy-duty specialized workshop tools for cutting, threading, and grooving various types of pipes and joints.</li><li>Organize necessary resources, including materials and equipment, for pipe fabrication tasks.</li><li>Ensure all pipe fabrication work complies with quality specifications.</li><li>Execute fabrication jobs both at the designated site and in the field.</li><li>Maintain accurate records of ongoing pipe fabrication progress.</li><li>Log all progress related to pipe fabrication jobs and report to the pipefitter supervisor.</li><li>Provide support in investigation jobs for the failure analysis of piping circuits.</li></ul><h3>Qualifications and Experience</h3><p>Candidates for the Fabricator III position should possess between <strong>5 to 10 years of relevant experience</strong> in fabrication roles. A strong understanding of piping fabrication activities, material specifications, and safety protocols is required.</p><h3>Required Skills</h3><ul><li>Proficiency in reading and interpreting engineering drawings and technical specifications.</li><li>Skilled in operating specialized workshop tools for pipe cutting, threading, and grooving.</li><li>Ability to organize resources and manage materials effectively for fabrication tasks.</li><li>Strong commitment to quality assurance and compliance with fabrication standards.</li><li>Capability to work independently and as part of a team in various site and field conditions.</li><li>Effective communication skills for reporting progress and collaborating with supervisors.</li></ul><h3>Work Environment</h3><p>This is a full-time position based in Al Jubail, Eastern region. The role involves working both in workshop settings and at various field locations, requiring adaptability and adherence to safety regulations.</p><h3>Application Process</h3><p>The salary for this position will be disclosed during the recruitment process. Interested candidates are encouraged to apply.</p>
<h3>About the Role</h3><p>SPIE Global Services Energy is seeking a Commissioning Leader for I&C Telecom & Security Systems. This contract position is based in Al Jubail, Eastern region. The primary responsibility of this role is to ensure that the contractor's pre-commissioning and commissioning preparation services comply with contractual and schedule obligations, as well as company specifications. The role also focuses on the safe and efficient execution of all commissioning activities, adhering to the OPERCOM® methodology and utilizing ICAPS© software.</p><h3>Key Accountabilities</h3><p>The Commissioning Leader supports the review and approval of the contractor's commissioning organization, deliverables, procedures, and planning to ensure a safe and efficient operational start-up. This involves developing pre-commissioning and commissioning activities in collaboration with the proponent department and actively participating in HSE initiatives. The role also includes managing systems and sub-systems definitions and overseeing the preparation and review of pre-commissioning and commissioning dossiers.</p><h3>Responsibilities</h3><ul><li>Ensure safe and compliant pre-commissioning and commissioning activities are carried out by the EPCC contractor.</li><li>Organize and oversee the review of contractor documentation within the team.</li><li>Manage interfaces with other disciplines, contractors, vendors, and proponents.</li><li>Monitor and report on EPCC contractor progress, identify areas of concern, and adjust priorities based on the critical path and overall project schedule.</li><li>Support the EPCC contractor with commissioning and handover dossier preparations.</li><li>Monitor and report on contractor/subcontractor progress, issuing periodic progress reports.</li><li>Organize and coordinate commissioning execution activities.</li><li>Witness all pre-commissioning and commissioning activities in the assigned area, alongside a team of discipline specialists.</li></ul><h3>Qualifications and Requirements</h3><ul><li>Experience in pre-commissioning and commissioning of petrochemical units and storage facilities.</li><li>Strong background in Data-IT systems, including Telephone, Wifi, video conferencing, PAGA, and fiber backbone.</li><li>Background in Security systems, such as ACS, IDAS, and security fencing.</li><li><strong>Mandatory</strong> background in Instrument & Control (EMERSON) systems.</li></ul><h3>Work Environment</h3><p>This is a contract position located in Al Jubail, Eastern region. The role involves working within a team of discipline specialists and managing interfaces with various stakeholders including contractors, vendors, and proponent departments.</p>
<h3>About the Role</h3><p>Met T&S is seeking a <strong>Commissioning Loop Checks Coordinator</strong> for a contract position in Al Jubayl, Saudi Arabia. This role is responsible for executing activities related to functional loop checks and interlock/sequence functionality checks, ensuring adherence to quality requirements, health, environmental, and safety regulations, and established procedures. The Coordinator reports to the Commissioning Control System Superintendent and is assigned to the project by the AVIMP Head of Department.</p><h3>Key Responsibilities</h3><ul><li>Cooperate with subcontractors, supervise, and verify the timely preparation of loop folders before activity commencement.</li><li>Oversee all Functional Loop Check (FLC) operations to ensure proper documentation flow and timely execution.</li><li>Record daily FLC progress and ensure its availability to management, QA/QC, planners, and other relevant parties.</li><li>Implement necessary actions involving management in cases of deviation between actual and scheduled progress.</li><li>Plan daily activities based on the "loops ready to test" list, manpower availability, and priorities provided by commissioning management.</li><li>Manage the repair or recalibration of instruments with support from the troubleshooting team.</li><li>Record and transmit major problems requiring construction subcontractor involvement (*, cable pulling, instrument relocation) to the construction team.</li><li>Prepare forms for all tests and ensure submission of certificates, duly signed by involved parties, for final handover to the certification engineer (QA/QC).</li><li>Coordinate actions with the electrical commissioning supervisor during activity performance.</li><li>Record all modifications made during FLC in the master drawings for as-built documentation.</li><li>Sign documents (narratives and forms) and follow up for PMC/client signatures.</li></ul><h3>Qualifications and Experience</h3><ul><li>University Degree or Diploma in Engineering or an equivalent field.</li><li>Minimum of <strong>10 years of experience</strong> in HSE in commissioning projects/operations within the oil & gas or petrochemical industries.</li><li>Relevant experience in at least <strong>3 major EPC projects</strong> in the oil & gas or petrochemical sector.</li></ul><h3>Work Type and Location</h3><p>This is a <strong>contract position</strong> located in Al Jubayl, Saudi Arabia. The role offers an excellent salary package with benefits.</p>
<h3>About the Role</h3><p>Agile Consultants is seeking an experienced <strong>Warehouse Storekeeper</strong> to manage daily warehouse operations for a client's manufacturing facility in Al Jubail, Saudi Arabia. This full-time role requires 2-5 years of relevant experience and focuses on maintaining efficient and accurate material flow within the warehouse.</p><h3>Role Overview</h3><p>The Warehouse Storekeeper will be responsible for overseeing all aspects of warehouse management, from material receipt to dispatch. This includes ensuring proper storage, handling, and inventory accuracy, as well as maintaining detailed records and adhering to safety standards. The successful candidate will play a key role in the smooth operation of the facility's material management processes.</p><h3>Key Responsibilities</h3><ul><li>Manage daily warehouse activities, including receiving, storage, picking, packing, and dispatch of materials.</li><li>Conduct regular cycle counts and inventory reconciliations to maintain stock accuracy.</li><li>Ensure proper storage and handling of materials in accordance with warehouse procedures.</li><li>Follow warehouse safety standards and maintain an organized working environment.</li><li>Update warehouse inventory records and transactions using SAP.</li><li>Maintain accurate warehouse documentation and reports using Microsoft Office.</li></ul><h3>Required Qualifications and Experience</h3><ul><li>2-5 years of experience in a warehouse storekeeper or similar role.</li><li>Knowledge of warehouse receiving, storage, picking, packing, and dispatch procedures.</li><li>Experience conducting cycle counts and inventory reconciliation.</li><li>Understanding of proper material storage, handling, and warehouse safety standards.</li></ul><h3>Skills and Attributes</h3><ul><li>Good organizational skills and attention to detail.</li><li>Proficiency in using SAP for inventory management.</li><li>Competency in using Microsoft Office for documentation and reporting.</li></ul><h3>Work Environment</h3><p>This full-time position is based at a manufacturing facility in Al Jubail, Saudi Arabia. The role requires active participation in daily warehouse operations, ensuring a safe and efficient working environment.</p>
<h3>About the Role</h3><p>Shanahan Engineering is recruiting a <strong>Commissioning Leader</strong> for a large petrochemical complex extension project located in Al Jubail, Eastern Province, Saudi Arabia. This is a contract position requiring over 10 years of experience.</p><h3>Role Overview</h3><p>The primary role of the Commissioning Site Leader is to ensure that the contractor's scope of services for pre-commissioning and commissioning preparation is carried out in compliance with contract and schedule obligations, and in line with company specifications. The position also involves ensuring the safe and smooth execution of all commissioning activities, following the OPERCOM® methodology and proper use of ICAPS© software.</p><h3>Key Responsibilities</h3><ul><li>Ensure with the team of discipline specialists the witnessing of all pre-commissioning and commissioning activities in the assigned area.</li><li>Ensure full compliance with acceptance criteria and AMIRAL program standards and specifications.</li><li>With the team of discipline specialists, ensure safe and compliant pre-commissioning and commissioning activities carried out by the EPCC contractor.</li><li>Organize and ensure review of contractor documentation within the team.</li><li>Manage interfaces with other disciplines, contractors, vendors, and proponents.</li><li>Monitor and report EPCC contractor progress, identify areas of concern, and adapt priorities according to the critical path and overall project schedule.</li><li>Support the EPCC contractor with commissioning and handover dossier preparations.</li><li>Support the review and approval of the contractor's commissioning organization, deliverables, procedures, and planning activities to ensure a safe and efficient operational start-up.</li><li>Develop pre-commissioning and commissioning activities with the proponent department.</li><li>Participate in HSE activities.</li><li>Manage systems and sub-systems definitions.</li><li>Ensure proper preparation and review of pre-commissioning and commissioning dossiers.</li><li>Monitor and report on contractor/subcontractor progress.</li><li>Issue periodic progress reports.</li><li>Organize and coordinate commissioning execution activities.</li></ul><h3>Qualifications and Requirements</h3><ul><li>High level of knowledge in all types of activities within a petrochemical site.</li><li>Multi-discipline specialists are required.</li><li>Over 10 years of experience in the field.</li><li>Process or operation background.</li><li>Knowledge of EPCC contract management.</li><li>High competencies in OPERCOM® and ICAPS© tools.</li><li>Experience in pre-commissioning and commissioning of petrochemical units and storage facilities.</li><li>Strong background in Data-IT systems (Telephone, Wifi, video conferencing, PAGA, fiber backbone, etc.), Security systems (ACS, IDAS, security fencing), and Instrument & Control (EMERSON) is mandatory.</li></ul><h3>Work Type</h3><p>This is a contract position. Salary details will be discussed during the interview process.</p>
Receive email alerts for Factory Jobs jobs
You can cancel your email alert at anytime