Cost Engineer Jobs in Saudi

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Lead the team development and coach other shift leaders. Participate in customer meetings. Lead the critical technical interventions and define root causes in a professional approach. Identify obstacles that relate to the department and propose solutions. Define risks and perform the required assessment. Improve the maintenance routes to be aligned with the operational requirements. Supervises the shift employees by overseeing their work, assessing their performance, enforcing policies and corrective measures, being the point of contact for questions, complaints, and concerns, and leading by example. Manages and executes the planned maintenance activities, leads, and sets the direction of the maintenance team. Ensures that employees comply with the company rules, standards, and key values at VI (acts as a role model) Develops employees so that they can cope with the demands of their current and possible future positions Vanderlande Industries Assesses employees performance and behavior. Sets priorities, distributes work and monitors progress and work quality. Ensures timely and complete all the assigned tasks in the department based on the schedule and priorities issued by the maintenance manager/ and the planning team. Ensure proper levels of supplies (spare parts, tools, and office supplies), and report the consumption to the maintenance manager on a daily/weekly basis. Initiate process improvement plan to deliver outstanding services and improve the system performance. Acts independently in several technical tasks. Identifies issues and solves problems that disturb the daily operation. Train and coach new employees and less experienced employees. Assist and manage other areas as needed, required, or requested.</p><p>The work environment/physical requirements described here are representative of those an employee may encounter while performing the essential functions of this job. Noise levels of 85 decibels can be reached at certain times, so safety measures shall be applied. Knowledge and utilization of PPE (i.e., safety glasses, gloves, etc.) are required Must be able to work in various indoor and outdoor climates. While performing the duties of this job, the employee often works near moving mechanical parts. Operate and maintain equipment and measurement instruments. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.</p><p>Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Required Education and Experience:</strong> 5+ years of prior experience as maintenance supervisor/ maintenance engineer in BHS or MHS with Siemens Simatic S7. Diploma/ Bachelor's degree in Mechatronics/ Control &amp; Instrumentation/ Mechanical/ Manufacturing engineering. CMMS. MS office. Valid Driver s License. Leadership and communication skills. Technical Report Writing. IBM DOS- Maximo. Team Management. Time Management.</p><p><strong>Preferred Qualifications:</strong> OSHA General Industries. Operations Management. Strategic Management. Lean Six Sigma Yellow/ Green Belt.</p><p><strong>Knowledge-Skills-Abilities (Competencies):</strong> Strong leadership skills, troubleshooting, and problem-solving skills Must be able to always communicate with others in a professional manner Must be able to follow and understand instructions Ability to work Safe and knowledge of OSHA regulations and practices Ability to lead in a team environment and be a team player Ability to train employees to read, understand, and follow electrical/ mechanical / blueprints. Detail-oriented and stress-resistant. Must have a strong willingness to learn. Must be able to lead and make decisions with little supervision. Must monitor and maintain quality. Must be able to identify process improvement. Organizational and time management skills. Proactive and strong work ethic and initiative, who would like to grow and develop within the organization. Flexibility with time, able to shift priorities quickly based on staff and system needs. Working knowledge of computers and equipment. Pro-active attitude towards process improvement. Confidence and professionalism in representing the company.</p><p><strong>Position Type/ Expected Hours of Work:</strong> Working Hours are 48 Hrs./week as stated in Saudi Labor Law. Shift schedule will be assigned by the department Manager, which should not exceed 12 Hrs./ per shift. Overtime will be applied for any additional hours exceeding the 48 Hrs./week.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job TitleSenior Shift leaderJob Description<p><b>Essential Functions (Job Duties and Responsibilities):</b></p><br><ul><li><p>Lead the team development and coach other shift leaders.</p><br></li><li><p>Participate in customer meetings.</p><br></li><li><p>Lead the critical technical interventions and define root causes in a professional approach.</p><br></li><li><p>Identify obstacles that relate to the department and propose solutions.</p><br></li><li><p>Define risks and perform the required assessment.</p><br></li><li><p>Improve the maintenance routes to be aligned with the operational requirements.</p><br></li><li><p>Supervises the shift employees by overseeing their work, assessing their performance, enforcing policies and corrective measures, being the point of contact for questions, complaints, and concerns, and leading by example.</p><br></li><li><p>Manages and executes the planned maintenance activities, leads, and sets the direction of the maintenance team.</p><br></li><li><p>Ensures that employees comply with the company rules, standards, and key values at VI (acts as a role model)</p><br></li><li><p>Develops employees so that they can cope with the demands of their current and possible future positions Vanderlande Industries</p><br></li><li><p>Assesses employees’ performance and behavior.</p><br></li><li><p>Sets priorities, distributes work and monitors progress and work quality.</p><br></li><li><p>Ensures timely and complete all the assigned tasks in the department based on the schedule and priorities issued by the maintenance manager/ and the planning team.</p><br></li><li><p>Ensure proper levels of supplies (spare parts, tools, and office supplies), and report the consumption to the maintenance manager on a daily/weekly basis.</p><br></li><li><p>Initiate process improvement plan to deliver outstanding services and improve the system performance.</p><br></li><li><p>Acts independently in several technical tasks.</p><br></li><li><p>Identifies issues and solves problems that disturb the daily operation.</p><br></li><li><p>Train and coach new employees and less experienced employees.</p><br></li><li><p>Assist and manage other areas as needed, required, or requested.</p><br></li></ul><p><b>Required Education and Experience:</b></p><br><ul><li><p>5+ years of prior experience as maintenance supervisor/ maintenance engineer in BHS or MHS with Siemens Simatic S7.</p><br></li><li><p>Diploma/ Bachelor's degree in Mechatronics/ Control &amp; Instrumentation/ Mechanical/ Manufacturing engineering.</p><br></li><li><p>CMMS.</p><br></li><li><p>MS office.</p><br></li><li><p>Valid Driver’s License.</p><br></li><li><p>Leadership and communication skills.</p><br></li><li><p>Technical Report Writing.</p><br></li><li><p>IBM DOS- Maximo.</p><br></li><li><p>Team Management.</p><br></li><li><p>Time Management.</p><br></li></ul><p><b>Preferred Qualifications:</b></p><br><ul><li><p>OSHA General Industries.</p><br></li><li><p>Operations Management.</p><br></li><li><p>Strategic Management.</p><br></li><li><p>Lean Six Sigma Yellow/ Green Belt.</p><br></li></ul><p><b>Knowledge-Skills-Abilities (Competencies):</b></p><br><ul><li><p>Strong leadership skills, troubleshooting, and problem-solving skills</p><br></li><li><p>Must be able to always communicate with others in a professional manner</p><br></li><li><p>Must be able to follow and understand instructions</p><br></li><li><p>Ability to work Safe and knowledge of OSHA regulations and practices</p><br></li><li><p>Ability to lead in a team environment and be a team player</p><br></li><li><p>Ability to train employees to read, understand, and follow electrical/ mechanical / blueprints.</p><br></li><li><p>Detail-oriented and stress-resistant.</p><br></li><li><p>Must have a strong willingness to learn.</p><br></li><li><p>Must be able to lead and make decisions with little supervision.</p><br></li><li><p>Must monitor and maintain quality.</p><br></li><li><p>Must be able to identify process improvement.</p><br></li><li><p>Organizational and time management skills.</p><br></li><li><p>Proactive and strong work ethic and initiative, who would like to grow and develop within the organization.</p><br></li><li><p>Flexibility with time, able to shift priorities quickly based on staff and system needs.</p><br></li><li><p>Working knowledge of computers and equipment.</p><br></li><li><p>Pro-active attitude towards process improvement.</p><br></li><li><p>Confidence and professionalism in representing the company.</p><br></li></ul><p><b>Position Type/Expected Hours of Work:</b></p><br><ul><li><p>Working Hours are 48 Hrs./week as stated in Saudi Labor Law. Shift schedule will be assigned by the department Manager, which should not exceed 12 Hrs./ per shift.</p><br></li><li><p>Overtime will be applied for any additional hours exceeding the 48 Hrs./week.</p><br></li></ul><p><b>Work Environment and Physical Demands:</b></p><br><p>The work environment/physical requirements described here are representative of those an employee may encounter while performing the essential functions of this job.</p><br><ul><li><p>Noise levels of 85 decibels can be reached at certain times, so safety measures shall be applied.</p><br></li><li><p>Knowledge and utilization of PPE (i.e., safety glasses, gloves, etc.) are required</p><br></li><li><p>Must be able to work in various indoor and outdoor climates.</p><br></li><li><p>While performing the duties of this job, the employee often works near moving mechanical parts. Operate and maintain equipment and measurement instruments.</p><br></li></ul><p>The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.</p><br><p><b>Other Duties:</b></p><br><p>Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Summary<p>Responsible for providing comprehensive nursing care utilizing the nursing process and meeting the established standard of nursing practice and performance. Demonstrates leadership competencies while in charge or acting as shift resource/team leader. </p><br><br>Essential Responsibilities and Duties<br><p>1. Provides total patient care as assigned according to the core standards of patient care and established policies and evidence-based practices. </p><br><br><p>2. Assumes accountability for assessing, planning, implementing and evaluating care as well as discharge planning for each patient.</p><br><br><p>3. Contributes to decreasing the length of stay/waiting time as per unit specific goal. Works in collaboration with Case Management to achieve goals.</p><br><br><p>4. Documents all relevant information correctly, appropriately, and in a timely manner.</p><br><br><p>5. Reports equipment failures, safety and security issues, and/or reduction of supply inventory to Head Nurse or designee.</p><br><br><p>6. Demonstrates collaborative multi-disciplinary partnerships working towards the achievements of constant improvement in quality patient care. Acts as an advocate for patients and families. Identifies ideas that will improve the quality of patient care and issues that will negatively affect patient care outcomes, using the professional practice framework. </p><br><br><p>&nbsp;7. Promotes a safe environment and safe patient care by embracing a safety culture and identifying areas of risk to head nurse or designee. Complies with policies for personal and patient safety and for the prevention of healthcare associated infections.</p><br><br><p>8. Contributes to the achievement of cost efficiency savings on unit. Maintains an awareness of resource utilization, exercising care in the ordering and use of staff, equipment, and materials.</p><br><br><p>9. Contributes to the achievement of clinical quality outcome indicators and patient satisfaction. Leads unit based Performance Improvement activities as assigned. </p><br><br><p>&nbsp;10. Participates in new staff/nursing student orientation aimed at developing competence and performance. Assists in maintaining a suitable learning environment and acts as a preceptor/mentor in the supervision and teaching of nursing students and new staff to develop their competence.</p><br><br><p>11. Demonstrates transcultural principles in nursing practice.</p><br><br><p>12. Contributes to special projects/assignments linked to nursing strategic priorities and professional practice model as assigned.</p><br><br><p>13. Assists in promoting and sharing knowledge via mentorship in line with relevant research and evidence based practice.</p><br><br><p>14. Follows all Hospital related policies and procedures.</p><br><br><p>15. Participates in self and other?s education, training and development, as applicable.</p><br><br>Education<p>Bachelor's or Associate Degree/Diploma in Nursing is required.</p><br><br>Experience Required<br><p><span>Two (2) years of Nursing experience with Bachelor?s or four (4) years with Associate Degree/Diploma is required. </span></p><br><br><span>No experience is required for Saudis with Bachelor?s Degree. Enrolment in New Graduate Development Program for staff with less than one (1) year of experience is required.</span>Other Requirements(Certificates)<p>Current Registered Nurse Licensure from country of origin and Saudi Commission for Health Specialties Licensure is required.</p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Tibah Airports Operation Co.<br>, a leading operator of the Prince Mohammad Bin Abdulaziz International Airport in Madinah, Saudi Arabia, is seeking a Contracts Management Senior Specialist to join its professional team.<br> This role plays a critical part in ensuring effective contract administration and governance within a major airport operation setting, supporting Tibah’s commitment to operational excellence and strategic growth under the PPP model.<br> The Contracts Management Senior Specialist will oversee contract development, negotiation, compliance, and risk mitigation activities, working closely with internal stakeholders and external partners to safeguard the company’s interests and sustain high service standards.<br> This position offers an excellent opportunity for seasoned contract management professionals aiming to contribute to one of the Middle East’s fastest-growing aviation hubs and engage in complex, high-value contractual arrangements.<br> Job Purpose To manage the full lifecycle of contracts, related LOA, PR, PO, Payments and ensure all agreements are properly structured, executed, monitored, and closed in compliance with organizational policies, legal requirements, and best practices.<br> The role supports commercial and operational objectives by mitigating contractual risks and ensuring value delivery from all contracts.<br> Responsibilities · Manage the end-to-end contract lifecycle including drafting, review, negotiation, execution, and closeout · Create and follow the related LOA, PR, PO, Payments and ensuring all the process cycle is placed timely · Review and analyze contract terms and conditions to identify risks, obligations, and compliance requirements · Coordinate with legal, finance, and operational departments to ensure contracts meet organizational needs · Maintain comprehensive contracts register and ensure all contracts are tracked and up to date · Monitor contract performance, milestones, deliverables, and SLAs to ensure compliance by all parties · Identify and manage contract variations, amendments, extensions, and renewals in a timely manner · Support tendering and procurement processes by reviewing RFPs, ITTs, and contract award documentation · Liaise with vendors, suppliers, and service providers on contractual matters and dispute resolution · Ensure contracts comply with applicable laws, regulations, and organizational policies · Prepare contract status reports, dashboards, and management updates · Develop and implement contract management procedures, templates, and guidelines · Conduct contract risk assessments and recommend mitigation strategies · Coordinate with finance on payment terms, invoicing, and financial obligations under contracts · Support audits and ensure contract documentation is maintained in an audit-ready state · Act as the subject matter expert and point of contact for contract-related queries across departments Identify opportunities for contract consolidation, cost savings, and process improvement Bachelor’s degree in law, Business Administration, Supply Chain Management, or a related field.<br> Master's degree is an advantage.<br> Certified Commercial Contracts Manager (CCCM) Certified Professional Contracts Manager (CPCM) (preferred) Minimum 6 years of experience in contracts management, procurement, or legal affairs, preferably in aviation, infrastructure, or a regulated industry.<br> Including at least 1 year leading a team.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Mission <p><b>Main Purpose:</b></p><br><br> <p>Supports REL Manager in ensuring workloads are prioritised based on operational and safety demands aligning with business needs. Supports the maintenance teams to trouble shoot complicated issues and ensure maintenance of assets are being done in accordance with quality standards. </p><br><br> <p>You’ll make sure our assets are safe, reliable and compliant, developing your own solutions using your own initiative with guidance from your more experienced peers and superiors. The role involves compliance with metro standards, coordination with multidisciplinary teams, and adherence to safety and quality requirements throughout the asset lifecycle.</p><br><br> <p>Supporting the procurement teams to provide technical analysis and justification for RFQ’s, development of Bill of Materials, tender input and clarifications, as well as exploring alternative equipment manufacturers to support localisation targets in Saudi Arabia with a focus of improving quality and reducing cost. </p><br><br> Profile <p><b>Key Responsibilities:</b></p><br><br> <p>1. Providing oversight for asset maintenance, maintenance planning, asset strategy, predictive and condition-based maintenance for discipline specific systems (REL)</p><br><br> <br> <p>2. Maintenance planning. Execution of maintenance and repair activities of the relevant equipment according to work plan and maintenance manuals</p><br><br> <br> <p>3. Ensuring quality standards are upheld during maintenance</p><br><br> <br> <p>4. Supporting for hiring, training and assessing team staff, managing ongoing personnel training and development efforts to</p><br><br> <br> <p>5. Support the REL manager and wider superiors in the technical directorate for Root Cause Analysis &amp; Incident Reporting for faults, failures, incidents and similar</p><br><br> <br> <p>6. Supporting the REL manager and the wider technical team for the creation, review, modification, approval of maintenance documentation, design drawings, documents</p><br><br> <br> <p>7. Executing and/or supervising complex maintenance activities by own teams or sub-contractors</p><br><br> <br> <p>8. Ensuring the safety of teams, following all safety process, correct use of tooling and similar. Creation and distribution of safety/quality briefs and toolbox talk to the supervisors</p><br><br> <br> <p>9. Supports the maintenance teams to trouble shoot complicated issues and ensure maintenance of assets are being done in accordance with quality standards. Reviewing CMMS logs and attachments to ensure maintenance teams are following good practices</p><br><br> <br> <p>10. Review of change management processes, ensuring all change management processes are thoroughly reviewed to avoid any operational impact</p><br><br> <br> <p>11. Deputising for the REL manager or Head of Transit Systems and support them in any reasonable requested tasks</p><br><br> <br><p><b>Qualifications:</b></p><br><br> <ul><li>Technical Diploma (Minimum Requirement)</li><li>Degree in Engineering (Desired)</li><li> Lean / Six Sigma (Desired</li></ul><br><p><u><span><b>Experience</b>:</span></u></p><br><br><br><p><span></span><span>5 years of system related experience in the rail/aviation/transportation industry</span></p><br><br> <p><span></span><span>Minimum of 3 years of proven experience in a supervisory role</span></p><br><br> <p><span></span><span>Experience in creating Bill of Materials and being involved in procurement, competitive tenders and providing technical clarifications</span></p><br><br> <p><span></span><span>Experience in Root Cause Analysis &amp; Failure Modes and Effects Analysis</span></p><br><br> <p><span></span><span>Experience of building relationships with, and influencing a range of people at all levels within the organisation</span></p><br><br> <p><span></span><span>Experience of providing input to senior management teams </span></p><br><br> <p><span></span><span>Experience of analysis and predicting future failures and providing solutions to increase the lifecycle of assets</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Mission <p><b>Main Purpose:</b></p><br><br> <p>Supports PSD Manager in ensuring workloads are prioritised based on operational and safety demands aligning with business needs. Supports the maintenance teams to trouble shoot complicated issues and ensure maintenance of assets are being done in accordance with quality standards. </p><br><br> <p>You’ll make sure our assets are safe, reliable and compliant, developing your own solutions using your own initiative with guidance from your more experienced peers and superiors. The role involves compliance with metro standards, coordination with multidisciplinary teams, and adherence to safety and quality requirements throughout the asset lifecycle.</p><br><br> <p>Supporting the procurement teams to provide technical analysis and justification for RFQ’s, development of Bill of Materials, tender input and clarifications, as well as exploring alternative equipment manufacturers to support localisation targets in Saudi Arabia with a focus of improving quality and reducing cost.</p><br><br> Profile <p><b><u>Key Responsibilities:</u></b></p><br><br> <p>1. Providing oversight for asset maintenance, maintenance planning, asset strategy, predictive and condition-based maintenance for discipline specific systems (PSD)</p><br><br> <br> <p>2. Maintenance planning. Execution of maintenance and repair activities of the relevant equipment according to work plan and maintenance manuals</p><br><br> <br> <p>3. Ensuring quality standards are upheld during maintenance</p><br><br> <br> <p>4. Supporting for hiring, training and assessing team staff, managing ongoing personnel training and development efforts to</p><br><br> <br> <p>5. Support the PSD manager and wider superiors in the technical directorate for Root Cause Analysis &amp; Incident Reporting for faults, failures, incidents and similar</p><br><br> <br> <p>6. Supporting the PSD manager and the wider technical team for the creation, review, modification, approval of maintenance documentation, design drawings, documents</p><br><br> <br> <p>7. Executing and/or supervising complex maintenance activities by own teams or sub-contractors</p><br><br> <br> <p>8. Ensuring the safety of teams, following all safety process, correct use of tooling and similar. Creation and distribution of safety/quality briefs and toolbox talk to the supervisors</p><br><br> <br> <p>9. Supports the maintenance teams to trouble shoot complicated issues and ensure maintenance of assets are being done in accordance with quality standards. Reviewing CMMS logs and attachments to ensure maintenance teams are following good practices</p><br><br> <br> <p>10. Review of change management processes, ensuring all change management processes are thoroughly reviewed to avoid any operational impact</p><br><br> <br> <p>11. Deputising for the PSD manager or Head of Transit Systems and support them in any reasonable requested tasks</p><br><br> <br><p><u><b>Qualifications:</b></u></p><br><br><ul><li>Technical Diploma (Minimum Requirement)</li><li>Degree in Engineering (Desired)</li><li> Lean / Six Sigma (Desired)</li></ul><br><p><u><span><b>Experience:</b></span></u></p><br><br><br><p><span></span><span>5 years of system related experience in the rail/aviation/transportation industry</span></p><br><br> <p><span></span><span>Minimum of 3 years of proven experience in a supervisory role</span></p><br><br> <p><span></span><span>Experience in creating Bill of Materials and being involved in procurement, competitive tenders and providing technical clarifications</span></p><br><br> <p><span></span><span>Experience in Root Cause Analysis &amp; Failure Modes and Effects Analysis</span></p><br><br> <p><span></span><span>Experience of building relationships with, and influencing a range of people at all levels within the organisation</span></p><br><br> <p><span></span><span>Experience of providing input to senior management teams </span></p><br><br> <p><span></span><span>Experience of analysis and predicting future failures and providing solutions to increase the lifecycle of assets</span></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<p>Qiddiya Investment Company, a key driver of Saudi Arabia s Vision 2030, is developing a world-class entertainment, cultural, and lifestyle destination that demands robust strategic supplier partnerships. As the project evolves, ensuring excellence in supplier relationship management is crucial to the success and sustainability of this giga project. We are looking for a highly experienced and visionary Senior Manager Strategic Supplier Relationship Management to lead and elevate the SRM function to greater levels of sophistication and impact. This senior leadership role will oversee the strategic direction, execution, and continuous improvement of the SRM program, fostering innovation, resilience, and value creation across the supply chain network. The ideal candidate possesses deep expertise in managing complex supplier ecosystems and driving cross-functional collaboration to realize strategic business outcomes.</p><p><b>Key Responsibilities :</b></p><ul><li>1. Leadership and Strategic Direction Define and champion the enterprise-wide SRM strategy in alignment with corporate objectives and Vision 2030 goals. Provide thought leadership on supplier engagement, risk mitigation, and governance frameworks at senior executive levels. Drive cultural transformation to embed strategic SRM practices throughout the organization.</li><li>2. Program Oversight and Continuous Improvement Lead the design, implementation, and evolution of SRM frameworks, policies, and tools to ensure industry best practices. Oversee supplier segmentation, risk assessments, performance measurement, and business continuity planning. Ensure integration of SRM initiatives with procurement, risk, legal, finance, and operational functions.</li><li>3. Supplier Relationship Leadership Develop and maintain executive-level relationships with strategic suppliers to drive innovation and mutual value. Guide cross-functional teams in executing joint business plans and strategic initiatives with key suppliers. Address complex supplier performance, risk, and compliance issues with balanced leadership.</li><li>4. Stakeholder Engagement and Governance Facilitate executive forums such as Quarterly Business Reviews and SRM steering committees. Influence and advise senior leaders to adopt consistent SRM governance models and decision frameworks. Champion transparency, accountability, and data-driven decision-making across the supplier ecosystem.</li><li>5. Team Development and Capability Building Lead, mentor, and develop a high-performing SRM team, fostering collaboration and professional growth. Promote skill development initiatives and succession planning within the team.</li><li>6. Value Creation and Innovation Drive initiatives that leverage supplier partnerships to deliver cost efficiencies, service excellence, and sustainability benefits. Champion ESG and digital transformation efforts aligned with organizational strategy.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>12+ years of relevant experience including strategic supplier relationship management, procurement, supply chain management, or related fields in complex and multinational environments.</li><li>Advanced degree such as MBA or Master s in Supply Chain, Business Administration, or related discipline preferred.</li><li>Relevant professional certifications such as CPSM, CSCP, or CPM are highly desirable.</li><li>Proven ability to influence and engage senior stakeholders and suppliers at executive levels.</li><li>Strong leadership, negotiation, and communication skills.</li><li>Experience in giga projects or large-scale developments is an advantage.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Summary<p>Responsible for providing comprehensive nursing care utilizing the nursing process and meeting the established standard of nursing practice and performance. Demonstrates leadership competencies while in charge or acting as shift resource/team leader. </p><br><br>Essential Responsibilities and Duties<br><p>1. Provides total patient care as assigned according to the core standards of patient care and established policies and evidence-based practices. </p><br><br><p>2. Assumes accountability for assessing, planning, implementing and evaluating care as well as discharge planning for each patient.</p><br><br><p>3. Contributes to decreasing the length of stay/waiting time as per unit specific goal. Works in collaboration with Case Management to achieve goals.</p><br><br><p>4. Documents all relevant information correctly, appropriately, and in a timely manner.</p><br><br><p>5. Reports equipment failures, safety and security issues, and/or reduction of supply inventory to Head Nurse or designee.</p><br><br><p>6. Demonstrates collaborative multi-disciplinary partnerships working towards the achievements of constant improvement in quality patient care. Acts as an advocate for patients and families. Identifies ideas that will improve the quality of patient care and issues that will negatively affect patient care outcomes, using the professional practice framework. </p><br><br><p>&nbsp;7. Promotes a safe environment and safe patient care by embracing a safety culture and identifying areas of risk to head nurse or designee. Complies with policies for personal and patient safety and for the prevention of healthcare associated infections.</p><br><br><p>8. Contributes to the achievement of cost efficiency savings on unit. Maintains an awareness of resource utilization, exercising care in the ordering and use of staff, equipment, and materials.</p><br><br><p>9. Contributes to the achievement of clinical quality outcome indicators and patient satisfaction. Leads unit based Performance Improvement activities as assigned. </p><br><br><p>&nbsp;10. Participates in new staff/nursing student orientation aimed at developing competence and performance. Assists in maintaining a suitable learning environment and acts as a preceptor/mentor in the supervision and teaching of nursing students and new staff to develop their competence.</p><br><br><p>11. Demonstrates transcultural principles in nursing practice.</p><br><br><p>12. Contributes to special projects/assignments linked to nursing strategic priorities and professional practice model as assigned.</p><br><br><p>13. Assists in promoting and sharing knowledge via mentorship in line with relevant research and evidence based practice.</p><br><br><p>14. Follows all Hospital related policies and procedures.</p><br><br><p>15. Participates in self and other?s education, training and development, as applicable.</p><br><br>Education<p>Bachelor's or Associate Degree/Diploma in Nursing is required.</p><br><br>Experience Required<br><p><span>Two (2) years of Nursing experience with Bachelor?s or four (4) years with Associate Degree/Diploma is required. </span></p><br><br><span>No experience is required for Saudis with Bachelor?s Degree. Enrolment in New Graduate Development Program for staff with less than one (1) year of experience is required.</span>Other Requirements(Certificates)<p>Current Registered Nurse Licensure from country of origin and Saudi Commission for Health Specialties Licensure is required.</p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Join a leading Saudi holding company driving large-scale EPC telecom infrastructure projects across the Kingdom.</strong></p><br><p>The <strong>FP&amp;amp;A Manager</strong> will lead the company's financial planning, budgeting, forecasting, performance reporting, and commercial finance activities. The role will act as a strategic business partner to executive management, providing financial insights, profitability analysis, and decision support across telecom infrastructure, EPC projects, and investment initiatives. </p><br><strong>Key Accountabilities:</strong><ul><li>Lead the annual budgeting process, rolling forecasts, and long-term financial planning across all business units.</li><li>Prepare monthly management reports, executive dashboards, and Board presentations highlighting financial and operational performance.</li><li>Perform detailed variance analysis against budgets, forecasts, and prior periods, providing actionable recommendations to management.</li><li>Develop financial models, business cases, investment evaluations, and scenario analysis to support strategic decision-making.</li><li>Partner with Operations, Projects, Commercial, Procurement, and Executive Management to provide financial insights and improve business performance.</li><li>Monitor project financial performance including project profitability, margins, revenue, cost analysis, WIP, backlog, and CAPEX utilization.</li><li>Analyze revenue trends, gross margins, EBITDA, operating expenses, working capital, and overall business profitability.</li><li>Support pricing strategies, commercial proposals, and investment evaluations through financial analysis.</li><li>Drive continuous improvement of planning, forecasting, and reporting processes to increase forecasting accuracy and operational efficiency.</li><li>Lead reporting automation initiatives and optimize ERP reporting capabilities, ensuring full utilization of Microsoft Dynamics or equivalent ERP systems.</li><li>Build and standardize financial dashboards, KPIs, and performance reporting frameworks across the organization.</li><li>Support executive leadership in strategic planning, business expansion, and operational improvement initiatives.</li><li>Collaborate with Finance, Accounting, and Treasury teams to ensure consistency between financial reporting and planning activities.</li><li>Support due diligence exercises, banking requirements, investment activities, and strategic projects as required.</li><li>Lead, mentor, and develop the FP&amp;amp;A team while fostering a high-performance, analytical, and business-partnering culture</li></ul><strong>Knowledge, Skills, and Experience:</strong><ul><li>Bachelor's degree in Finance, Accounting, Economics, or Business Administration.</li><li>Professional certification preferred: CFA, CMA, CPA, ACCA, SOCPA, or equivalent.</li><li>Minimum 8–10 years of progressive experience in Financial Planning &amp;amp; Analysis, Corporate Finance.</li><li>Strong experience within telecom, EPC, infrastructure, construction, engineering, or project-driven environments.</li><li>Proven expertise in budgeting, forecasting, financial modeling, business partnering, and management reporting.</li><li>Strong understanding of project financial analysis, profitability analysis, CAPEX planning, and performance management.</li><li>Experience working in high-growth organizations, investment-backed companies, or rapidly expanding businesses.</li><li>Strong hands-on experience with ERP systems, preferably Microsoft Dynamics, SAP, Oracle, or similar platforms.</li><li>Advanced Microsoft Excel skills with strong financial modeling and analytical capabilities.</li><li>Experience building FP&amp;amp;A functions, reporting frameworks, dashboards, and planning processes.</li><li>Strong business acumen with the ability to translate financial information into strategic recommendations.</li><li>Excellent presentation, communication, and stakeholder management skills.</li><li>High level of accountability, ownership, and execution discipline. </li><li>Ability to manage multiple priorities, work under pressure, and support executive decision-making in a fast-paced environment.</li><li>Strong analytical thinking, problem-solving ability, and attention to detail.</li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 5+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To develop and implement the strategic business plan at the SQE Directorate level and to advise, and assist the effective and efficient management of Safety, Quality, Security and Environment in order to drive business growth and performance continuous improvement programs to deliver on company strategic and business objectives within set KPI's, agreed budgets and adopted policies and procedures.</p><br><ul><li><p>Recommend and support the development of directorate’s long-term strategy in line with the company business strategy and objectives, review the strategy periodically to assess the alignment and drive course correction, if required.</p></li><li><p>Contribute to the design of the SQE Directorate’s long-term strategy and roadmap.</p></li><li><p>Suggest and advise on continuous improvement in the development of SQE activities.</p></li><li><p>Assess SQE directorate’s strategy and plan to support the functional strategy.</p></li><li><p>Examine the progress of key projects/initiatives and provide guidance to the SQE to provide safe, secure, and efficient management.</p></li><li><p>Monitor and assist in addressing issues/challenges in achieving the planned objectives of the SQE directorate.</p></li><li><p>Participate in SQE directorate’s vision, mission and strategy discussions with the SQE executive director and other managers to provide feedback on the direction of the directorate.</p></li><li><p>Develop business cases for SQE Directorate projects.</p></li><li><p>Assist in ensuring that all the available resources are utilized to achieve the directorate’s objectives and goals.</p></li><li><p>Advise on conducting the annual budget for the Directorate in accordance with the set objectives and business plan.</p></li><li><p>Perform research on processes and recommend changes in strategy to improve SQE business.</p></li><li><p>Participate in assisting the management and recommend potential updates of the SQE manuals and documents, if required.</p></li><li><p>Provide recommendations for ensuring a secure and efficient operation for the staff and equipment requirements.</p></li><li><p>Support the SQE Executive Director in ensuring the ongoing development and performance.</p></li><li><p>Advise and develop, SQE Directorate’s compliance KPIs to enhance performance.</p></li><li><p>Recommend intelligent solutions to enhance the quality of project delivery.</p></li><li><p>Research and advise SQE Executive Director to initiate new strategies and plans for the growth of SQE activities.</p></li><li><p>Assist in investigating complaints, incidents, accidents, and breaches of air regulations.</p></li><li><p>Recommend continuous improvement and best practices in the safety performance and compliance of ANS.</p></li><li><p>Report any breaches and hazardous activities and suggest appropriate measures to prevent nonconformity of ANS.</p></li><li><p>Establish the necessary guidelines and boost the importance of safety in ANS operations.</p></li><li><p>Advise on enhancement of ANS incidents and reporting system.</p></li><li><p>Ensure compliance with all relevant safety, quality, security and environmental management policies and procedures.</p></li><li><p>Recommend appropriate distribution of responsibility and workload.</p></li><li><p>Provide recommendations to managers regarding procedures and facilities to meet business requirements.</p></li><li><p>Promote a high-performance working environment embracing company’s values.</p></li><li><p>Provide a complete guidance on establishing strategic SQE planning and follow up process of policies, procedures, and controls.</p></li><li><p>Recommend management of change through contributing to the identification of opportunities for continuous improvement of systems and processes considering leading practices, changes in business environment, cost reduction and productivity improvement.</p><br></li><li><p>Minimum 12 years of experience in ANS and/or Aviation business.</p></li><li><p>Full understanding of ICAO documents &amp; regulations.</p></li><li><p>A Bachelor’s degree in ANS or related field in Aviation management.</p></li><li><p>Familiar with and have full understanding of GACARs, ICAO documents, regulations &amp; standards or related field.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Assist in the implementation of Health, Safety, Environment policies, and procedures and to ensure alignment with corporate, national, and international requirements and good practice.</p><p>Job Purpose: Assist in the implementation of Health, Safety, Environment policies, and procedures and to ensure alignment with corporate, national, and international requirements and good practice to support the development of a safe environment within RUA.</p><p>Job Responsibilities:</p><ul><li>HSSE Management System: Comply and implement HSSE requirements as per RUA-approved HSSE Roles and Responsibilities.</li><li>Assist HSSE management with the implementation and execution of RUA HSSE Management system and HSSE Policy requirements in respective programs.</li><li>Perform HSSE Inspections and monitor RUA and contractors activities on site and evaluate compliance against RUA HSSE management system requirements and HSSE regulatory compliance.</li><li>Raise and escalate the HSSE site issues and follow up on the rectification of the issue with Consultants and Contractors within the agreed time frame.</li><li>Participate in the HSSE Meetings, Campaigns, and pieces of training to ensure it is up to the required standards.</li><li>Effectively contribute to all the HSSE initiatives to achieve the HSSE department KPIs.</li><li>Advise and provide technical support to the site team on all HSSE matters.</li><li>Participate in all site training programs and awareness sections to support the continual improvement of HSSE awareness across the program.</li><li>Ensure the implementation of a rigorous HSSE incident investigation process, including the appropriateness of corrective actions to prevent a recurrence.</li><li>Liaise with contractors and consultants to ensure Environmental Emergency response drills are conducted and evaluate the emergency response arrangements.</li><li>Ensure the implementation of the RUA Safe System of Work.</li><li>Assess, communicate, and monitor HSSE performance and compliance against the applicable HSSE regulations.</li><li>Participate in HSSE investigations wherever required, review HSSE incident reports, and ensure recommended preventive actions are adequate to prevent recurrence.</li><li>Participate in Reviewing of consultant s and contractor s Environmental prequalification process and evaluation against RUA HSSE requirements.</li><li>Review HSSE reports and analysis of incident statistics, identifying trends and suggesting improvements.</li><li>Apply health, safety, environmental and security, and quality management policies, procedures, and controls to ensure employee safety, legislative compliance, delivery of high-quality products/services, and a responsible environmental attitude.</li><li>Contributes to the identification of opportunities for continuous improvement of the functional systems, processes, and practices considering international best practice , improvement of business processes, cost reduction, and productivity improvement.</li><li>Monitor and analyze HSSE compliance performance data across all organizational functions and service providers during operations across the master community.</li><li>Track compliance trends, audit findings, and prepare performance dashboards and regulatory reports during operations across the master community.</li><li>Maintain compliance databases and documentation systems for all HSSE audit and inspection activities during operations across the master community.</li><li>Support audit activities and document compliance assessments with detailed analysis and recommendations during operations across the master community.</li><li>Analyze compliance data to identify trends, gaps, and provide improvement recommendations during operations across the master community.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in engineering, Occupational Health and Safety, or any other related field.</li><li>Proficient in both Arabic and English (written and spoken).</li><li>No prior experience required.</li><li>Eligible for Tamheer Program.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>About Lucid At Lucid, we are creating exceptional mobility experiences through innovation to drive the world forward. Built on Lucid s proprietary technology and software-defined vehicle architecture, our award-winning vehicles bring our Compromise Nothing approach to the global automotive market. That means refusing to choose between performance and sustainability, design and engineering, ambition and integrity. In Lucid Air and Lucid Gravity, we have designed and built vehicles that have redefined their segments, combining exceptional range, performance, design, and expansive space in a single experience. We achieve this through deep vertical integration, with design, engineering, and production happening in-house across our global offices and manufacturing facilities. Our teams come from industries around the world, united by a shared commitment to excellence. By refusing to settle, you can help redefine what s possible and shape the future of mobility. Position Overview: The Maintenance Planner is responsible for developing, coordinating, and optimizing maintenance schedules for equipment and machinery to ensure maximum reliability and minimal downtime. This role requires strong organizational skills, technical understanding, and the ability to collaborate effectively with cross-functional teams to ensure maintenance activities are executed safely, efficiently, and on time. The Maintenance Planner creates and manages preventive maintenance plans, oversees work orders, coordinates with technicians and external vendors, and maintains accurate documentation of all maintenance activities. A key focus of the role is identifying opportunities to improve maintenance processes, enhance equipment reliability, and support operational productivity. Core responsibilities include analyzing equipment history, determining maintenance requirements, estimating labor and material needs, and ensuring compliance with safety and regulatory standards. The Maintenance Planner works closely with maintenance supervisors, engineers, and operations teams to align maintenance activities with production schedules and business objectives. Success in this role requires proficiency with CMMS systems, strong communication skills, and the ability to prioritize tasks in a fast-paced environment. A high-performing Maintenance Planner contributes directly to improved equipment uptime, reduced operational costs, and long-term asset performance. Key Responsibilities: Develop and maintain preventive maintenance (PM) schedules. Plan and coordinate corrective, predictive, and emergency maintenance. Coordinate maintenance activities with operations and engineering teams Create and manage work orders using CMMS software Create detailed job plans including required tools, materials, labor, and time estimates. Ensure availability of spare parts and tools for scheduled tasks. Coordinate with production/operations to schedule maintenance with minimal disruption. Review and prioritize incoming work requests. Monitor equipment performance and maintenance history. Ensure compliance with safety and regulatory standards. Communicate with vendors and contractors for outsourced maintenance work and Maintenance spare parts. Track and report on maintenance KPIs and performance metrics. Identify opportunities for process improvements and cost savings. Support root cause analysis and corrective action planning. Ensure accurate documentation and history for all maintenance work. Develop and maintain spare parts storage, inventory and control. Raising PR for spare parts requirements. Analyze work order feedback and maintenance performance data to improve future plans, update equipment history, and refine maintenance techniques. Promote a safe work culture, including LOTO and permit-to-work systems. Participate in ISO audit and develop maintenance procedures. Implement and sustain 5S methodologies to improve housekeeping, efficiency, and equipment accessibility. Administrate the Computerized Maintenance Management System (CMMS) by adding new assets and sub-assets (plant, location, Creating assets code,) importing maintenance tasks, and import spare parts for each assets. Maintain accurate data, asset history, and documentation within the Computerized Maintenance Management System (CMMS) Skills: Strong knowledge of maintenance procedures and equipment. Expertise with CMMS (e.g., SAP PM, Maximo, Fiix) and maintenance planning tools. Strong Planning Skills. Strong analytical and problem-solving skills. Strong Inventory management. Multitasking skills. Flexibility and adaptability. Familiarity with CMMS (Computerized Maintenance Management Systems). Ability to read technical drawings and equipment manuals Familiarity with quality tools (FMEA, 5 Whys, Fishbone Diagram). Proficiency in Microsoft Office (Excel, Word, PowerPoint); Knowledge of CAD, SolidWorks is a plus. Strong communication and interpersonal skills. Attention to detail and strong organizational skills. Strong Time Management Skills. Understanding of safety and compliance regulations. Ability to work under pressure. Minimum Qualifications: Technical Diploma or associate degree in: Mechanical Engineering Technology, Electrical Engineering Technology, Industrial Maintenance, Mechatronics, Industrial Engineering with +7 Years in maintenance field, +3 Years as maintenance planner. Bachelor s degree in engineering or Equivalent is preferred with +5 Years in maintenance field, +3 Years as maintenance planner. Experience Automotive industry is a pluse Proven experience as a Maintenance Planner or similar role. Passion for electric vehicles and sustainable transportation. Ability to work flexible hours in a production environment. Valid driver s license in Saudi Arabia. CMRP is A plus. Compensation &amp; Benefits: Lucid offers a comprehensive and competitive benefits package including medical, dental, and vision insurance; life and disability coverage; paid time off; paid holidays; and a 401(k) retirement plan. Eligible employees may also participate in Lucid s equity program and/or a discretionary annual cash incentive program. Incentive and equity awards, if applicable, are determined based on individual performance, role scope, market considerations, and overall company results, in accordance with the terms of the applicable plans.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Strong knowledge of maintenance procedures and equipment.</li><li>Expertise with CMMS (e.g., SAP PM, Maximo, Fiix) and maintenance planning tools.</li><li>Strong Planning Skills.</li><li>Strong analytical and problem-solving skills.</li><li>Strong Inventory management.</li><li>Multitasking skills.</li><li>Flexibility and adaptability.</li><li>Familiarity with CMMS (Computerized Maintenance Management Systems).</li><li>Ability to read technical drawings and equipment manuals</li><li>Familiarity with quality tools (FMEA, 5 Whys, Fishbone Diagram).</li><li>Proficiency in Microsoft Office (Excel, Word, PowerPoint); Knowledge of CAD, SolidWorks is a plus.</li><li>Strong communication and interpersonal skills.</li><li>Attention to detail and strong organizational skills.</li><li>Strong Time Management Skills.</li><li>Understanding of safety and compliance regulations.</li><li>Ability to work under pressure.</li><li>Technical Diploma or associate degree in: Mechanical Engineering Technology, Electrical Engineering Technology, Industrial Maintenance, Mechatronics, Industrial Engineering with +7 Years in maintenance field, +3 Years as maintenance planner.</li><li>Bachelor s degree in engineering or Equivalent is preferred with +5 Years in maintenance field, +3 Years as maintenance planner.</li><li>Experience Automotive industry is a pluse</li><li>Proven experience as a Maintenance Planner or similar role.</li><li>Passion for electric vehicles and sustainable transportation.</li><li>Ability to work flexible hours in a production environment.</li><li>Valid driver s license in Saudi Arabia.</li><li>CMRP is A plus.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Work Preparator, E&amp;I is responsible for work preparation activities related to E&amp;I works. Work preparation includes identifying the scope of work, quantifying it, including type and length of cables, cable penetrations (MCTs) cable trays, generators, alternators, switchboards AC/DC motors, rewinding, A/C repair, instrumentation, automation, navigation, safety-Solas, ICCP cathodic protection. manhours breakdowns, total duration of repair, receiving client signatures on proposed diagrams, preparing the materials list, making the required requisitions, following up with the work in progress and closure of the work and related documentation. </p><br><p> 3. KEY ACCOUNTABILITIES Areas of Accountabilities (list up to 10 prime activities) (Describe concisely each principal work activity listed in logical order normally the list with include the most important duty first indicating important decision and recommendations made if applicable; start sentences with action verbs first)  </p><br><p>Adhere to, reinforce, and promote IMI Health, Safety, Environment and Quality Policies.  </p><br><p>Make detailed evaluations of repair specifications, itemizing man-hour requirements, total duration of repair, preparing the BOM, and where necessary requisitioning of materials (PRs), Inter-trade involvements, direct purchases.  </p><br><p>Issue internal requests and follow up the progress of such assistance.  </p><br><p>Ensure timely submission of proposals/drawings for approval prior to commencing the work.  </p><br><p>Prepare drawings/sketches as per the identified scope of work, receive client signatures for the same and distribute as required.  </p><br><p>Liaise with Ops project controls for information required/submittal  </p><br><p>Assist in bid support as and when required  </p><br><p>Prepare material lists necessary for execution of the jobs, assure availability of the materials either from Warehouse or by direct purchase  </p><br><p>Prepare detailed job sheets for supervisors, records progress daily.  </p><br><p>Prepare final work description including all supplies and man-hours used for approval by Section/Department Head </p><br> <p>Update the vessels files for E&amp;I repairs. Capture all actual as fitted E&amp;I stuff at the end of repair to be &nbsp;compared with initial SOW for commercial purposes. &nbsp;</p><br><p> Prepare the work completion reports/certificates at the end of the repair. </p><br><p>Responsible for closing on time without any delays all relevant GRNs and SRNs for proper cost &nbsp;capturing of the projects affecting the gross margins calculation. &nbsp; </p><br><p>Prepare the detailed scope of work, work packages, specifications in case of work outsourcing to &nbsp;external parties. &nbsp; Liaise with the engineering team as needed. &nbsp; </p><br><p>To be able to optimize the material usage based on BOM and minimizing the material waste. &nbsp; </p><br><p>Ensure of the most efficient work preparation always keeping in mind the cost cutting and time saving. &nbsp;</p><br><p>&nbsp;Provide estimated man-hours details and progress of all jobs to Production Planning Units twice a &nbsp;week. &nbsp;</p><br><p>Attend daily meetings on board with Owner's Representatives and Project Managers to follow up the &nbsp;progress of the work as required. &nbsp; Develop work descriptions. &nbsp; </p><br><p>Perform other relevant tasks as directed by reporting management</p><br><p>QUALIFICATIONS &amp; EXPERIENCE Education  </p><br><p>Degree or Diploma in relevant electrical engineering discipline related with the required extensive experience. &nbsp; Professional Qualifications (Certifications &amp; Accreditations)  </p><br><p>Proven experience of performing E&amp;I work preparation within a Ship Repair and Rig Repair establishment at same/equivalent level.  </p><br><p>Shipyard Industry/Marine related professional qualifications or relevant time served. Competencies &nbsp; (Knowledge, Skills &amp; Abilities)  </p><br><p>Real and in-depth knowledge of production processes in a shipyard environment in ship and rig repairs.  QC/QA, Documentation management </p><br><p> Assessing resource requirements  </p><br><p>Proficiency in relevant software (e.g., MS suite, AutoCAD).  </p><br><p>Sound understanding of Engineering drawings  </p><br><p>Sound knowledge on tools/equipment and consumables and material grades &nbsp;  </p><br><p>Overhauling working methods and processes  </p><br><p>In depth knowledge of ISO standards, classification, API, and IECEX rules and regulations and other regulatory requirements.  </p><br><p>Physically fit and able to work in extreme climatic conditions. Experience  </p><br><p>At least 3 years’ experience for degree holders and 11 years’ experience for diploma holders in the E&amp;I production in shipyard environment to ship/rig repairs. &nbsp; Languages  </p><br><p>Excellent communication skills (oral and written) in the English Language</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.</p><br><p>Take the opportunity to become a Heartist®, and let your heart guide you in this world where life beats faster.</p><br><br>Job Description<br><br><ul><li>Operate Maintain, Repairs and does necessary adjustment for all electrical equipment and systems including Fire Alarm, Motor Control Centers electrical interconnectivity with 3rd party systems.&nbsp;</li><li>Assist Fire Alarm contractors on scheduled maintenance and briefs them on the condition of the equipment.</li><li>Ensures of sufficient stock of spare parts available for the electrical equipment and thoroughly checks the purchased materials for their quality.</li><li>Executes energy saving measures and helps the department to reduce the energy cost.</li><li>Carryout daily checks on Lighting control, Power system, Electrical service rooms (MV/ LV), Energy Meters, Transformer Rooms, Fire Pump Rooms, Room Management System, Water Tank systems, BMS system ensuring and all set parameters as desired for intended operation.</li><li>Familiarizes himself with total layout of the building and estate regarding safety aspects such as isolation points, etc.</li><li>Performs preventive maintenance work on for the electrical equipment and maintains service / history reports.</li><li>Attends to repair and maintain Electrical&nbsp; Service System</li><li>Advises improvements to the present system in order to optimize the operating efficiency and economy of the said system.</li><li>Assists supervisor to prepare spare parts lists for the electrical equipment</li><li>Attends to repair and maintain general mechanical systems.</li><li>Participates in the Hotel Energy Conservation Program.</li><li>Ensures that the plant room, workshop and related areas are kept in clean and tidy condition.</li><li>Also to do breakdown service in guest rooms,</li><li>Servicing and maintenance of public area electrical equipments.</li><li>Carries out occasional repair work as required, following specifications and handles any&nbsp; unexpected problems&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Prevents problems from occurring in the hotel's technical installations</li><li>Follows the preventive maintenance program.</li><li>To assist in carrying out monthly inventory of operating equipment.</li><li>To carry out any other reasonable duties and responsibilities as assigned.</li><li>To undertake Duties of the Electrical Technician as per the Engineer Duty Roster</li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

As a Service Trainee, you will be at the forefront of our brand-new, state-of-the-art industrial scientific facility. This role is designed for motivated individuals looking to launch a career in technical services, instrumentation, and laboratory support.<br><br>Under the guidance of senior engineers and specialists, you will learn to install, calibrate, and maintain sophisticated analytical equipment used in the industrial and energy sectors. This position offers a unique "ground-floor" opportunity to grow alongside our expanding operations in the Kingdom.<br><br>Key Responsibilities<br><br>Technical Assistance: Support senior technicians in the installation and commissioning of high-precision scientific instruments. Preventative Maintenance: Learn to perform routine checks, cleaning, and basic repairs to ensure equipment uptime. Calibration & Compliance: Assist in calibrating instruments according to Saudi Arabian and international standards Documentation: Maintain accurate digital logs of service reports, equipment performance, and spare parts inventory. Safety Adherence: Strictly follow facility HSE (Health, Safety, and Environment) protocols and Saudi industrial regulations. Customer Support: Accompany the field service team to client sites to learn professional communication and troubleshooting.<br><br>Requirements & Qualifications<br><br>Education: Recent Diploma or Associate Degree in Electronics, Mechatronics, Instrumentation, Applied Physics, or a related technical field. Language Skills: Proficiency in English (technical manuals are in English); Arabic required. Aptitude: Strong mechanical or electrical troubleshooting skills and a desire to work with "hands-on" technology. Mobility: A valid Saudi driver’s license (or willingness to obtain one) and a willingness to travel to various industrial sites if required. Soft Skills: A proactive attitude, eagerness to learn, and the ability to work effectively within a multicultural team.<br><br>Why Join Us?<br><br>Cutting-Edge Training: Hands-on experience with the latest industrial scientific technology. Career Path: Clear progression from Trainee to Field Service Engineer or Technical Specialist. Vision 2030 Growth: Contribute to the Kingdom’s industrial transformation and localization goals.<br><br>Notes To Applicants<br><br>This internship is unpaid and is designed to provide hands-on experience and learning opportunities rather than financial compensation. We are committed to fostering local talent. Saudi nationals are highly encouraged to apply as part of our commitment to the Saudization program.<br><br>Fortive Corporation Overview<br><br>Fortive's essential technology makes the world safer and more productive. We accelerate transformation in high-impact fields like workplace safety, build environments, and healthcare.<br><br>We are a global industrial technology innovator with a startup spirit. Our forward-looking companies lead the way in healthcare sterilization, industrial safety, predictive maintenance, and other mission-critical solutions. We're a force for progress, working alongside our customers and partners to solve challenges on a global scale, from workplace safety in the most demanding conditions to advanced technologies that help providers focus on exceptional patient care.<br><br>We are a diverse team 10,000 strong, united by a dynamic, inclusive culture and energized by limitless learning and growth. We use the proven Fortive Business System (FBS) to accelerate our positive impact.<br><br>At Fortive, we believe in you. We believe in your potential—your ability to learn, grow, and make a difference.<br><br>At Fortive, we believe in us. We believe in the power of people working together to solve problems no one could solve alone.<br><br>At Fortive, we believe in growth. We're honest about what's working and what isn't, and we never stop improving and innovating.<br><br>Fortive: For you, for us, for growth.<br><br>About Industrial Scientific<br><br>Industrial Scientific designs and manufactures gas detection products and solutions that protect workers from hazardous conditions around the world. Since our beginnings in 1985, we have pioneered numerous technologies, including the first 3-gas detector, 6-gas detector, wireless gas detector, and even the first gas detector to be included on a NASA space shuttle. Today, we continue to innovate and expand our hardware and software offerings to equip the connected workers of the future. Our latest solutions make it possible to see and respond to hazards in real time, bringing us one step closer to our vision of ending death on the job by 2050.<br><br>We Are an Equal Opportunity Employer. Fortive Corporation and all Fortive Companies are proud to be equal opportunity employers. We value and encourage diversity and solicit applications from all qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity or expression, or other characteristics protected by law. Fortive and all Fortive Companies are also committed to providing reasonable accommodations for applicants with disabilities. Individuals who need a reasonable accommodation because of a disability for any part of the employment application process, please contact us at applyassistance@fortive.com.<br><br>Industrial Scientific designs and manufactures gas detection products and solutions that protect workers from hazardous conditions around the world. Since our beginnings in 1985, we have pioneered numerous technologies, including the first 3-gas detector, 6-gas detector, wireless gas detector, and even the first gas detector to be included on a NASA space shuttle. Today, we continue to innovate and expand our hardware and software offerings to equip the connected workers of the future. Our latest solutions make it possible to see and respond to hazards in real time, bringing us one step closer to our vision of ending death on the job by 2050.<br><br>We Are an Equal Opportunity Employer. Fortive Corporation and all Fortive Companies are proud to be equal opportunity employers. We value and encourage diversity and solicit applications from all qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity or expression, or other characteristics protected by law. Fortive and all Fortive Companies are also committed to providing reasonable accommodations for applicants with disabilities. Individuals who need a reasonable accommodation because of a disability for any part of the employment application process, please contact us at applyassistance@fortive.com.

<p>The Assistant Manager Finance and Procurement Operations Business Partner supports the Marketing function in managing its financial planning, procurement activities, vendor relationships, and operational requirements. The role acts as the main coordination point between Marketing and Finance, Procurement, Legal, and external suppliers to ensure budgets, purchase requests, contracts, purchase orders, and payments are managed efficiently and in accordance with organizational policies.</p><p><strong>Financial Planning and Budget Management</strong></p><ul><li>Support the preparation and management of the Marketing department s annual budget and financial plans.</li><li>Work with Marketing teams to forecast spending requirements across campaigns, events, media, sponsorships, agencies, and other activities.</li><li>Monitor actual spending, commitments, and available budgets against approved plans.</li><li>Prepare regular budget reports, forecasts, variance analyses, and financial updates for Marketing leadership.</li><li>Identify potential budget risks, overspending, underspending, and funding gaps, and recommend appropriate actions.</li><li>Support budget transfers, reallocations, accruals, and year-end financial closing activities.</li><li>Ensure accurate allocation of costs across Marketing functions, projects, campaigns, and cost centres.</li></ul><p><strong>Procurement Operations</strong></p><ul><li>Coordinate procurement requirements for marketing campaigns, events, media services, creative agencies, production services, research, and other marketing activities.</li><li>Support the preparation and submission of purchase requisitions, requests for proposals, tender documents, and purchase orders.</li><li>Work with Marketing stakeholders to develop clear scopes of work, technical requirements, deliverables, and commercial evaluation criteria.</li><li>Track procurement activities from initial request through sourcing, evaluation, contracting, purchase order issuance, and payment.</li><li>Ensure procurement requests are supported by the required approvals and documentation.</li><li>Maintain visibility of procurement timelines and follow up on delayed or outstanding actions.</li></ul><p><strong>Vendor and Contract Management</strong></p><ul><li>Coordinate the onboarding and registration of new Marketing vendors and agencies.</li><li>Maintain accurate records of vendor contracts, purchase orders, deliverables, payment schedules, and contract expiry dates.</li><li>Monitor vendor performance against agreed service levels, deliverables, timelines, and budgets.</li><li>Support contract renewals, amendments, extensions, and closure activities.</li><li>Coordinate with Procurement and Legal to address contractual, commercial, or supplier-related matters.</li><li>Support the resolution of vendor disputes, delayed deliverables, invoice discrepancies, and payment issues.</li></ul><p><strong>Invoice and Payment Management</strong></p><ul><li>Review invoices and supporting documents to confirm alignment with contracts, purchase orders, and completed deliverables.</li><li>Coordinate with Marketing teams to obtain confirmation of services and approvals before processing payments.</li><li>Track invoices and payments and follow up with Finance, Procurement, and vendors on outstanding items.</li><li>Maintain accurate records of financial commitments, invoices, accruals, and payment status.</li><li>Support the timely resolution of blocked, rejected, or incorrectly submitted invoices.</li></ul><p><strong>Business Partnering and Stakeholder Management</strong></p><ul><li>Act as the main operational link between Marketing and Finance, Procurement, Legal, and other corporate functions.</li><li>Advise Marketing stakeholders on relevant financial, procurement, and contracting processes.</li><li>Support Marketing teams in planning procurement lead times and selecting the appropriate sourcing approach.</li><li>Facilitate regular budget and procurement review meetings with Marketing stakeholders.</li><li>Provide clear updates to management on budget status, procurement progress, risks, and required decisions.</li><li>Build effective relationships with internal teams, agencies, suppliers, and service providers.</li></ul><p><strong>Governance, Compliance and Reporting</strong></p><ul><li>Ensure all Marketing financial and procurement activities comply with organizational policies, delegated authorities, and approval requirements.</li><li>Maintain complete and accurate documentation to support governance reviews and internal or external audits.</li><li>Develop and maintain trackers, dashboards, reports, and operational records for budgets, contracts, purchase orders, and payments.</li><li>Identify process gaps and recommend improvements to increase efficiency, visibility, and compliance.</li><li>Support the development of standardized templates, guidelines, and working procedures for Marketing operations.</li><li>Monitor key operational indicators, including procurement turnaround time, budget utilization, payment status, and vendor performance.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Finance, Accounting, Business Administration, Procurement, Supply Chain Management, or a related field.</li><li>Professional certification in Finance, Procurement, Supply Chain, or Project Management is an advantage.</li><li>Minimum of 4-6 years of relevant experience in finance operations, procurement, commercial operations, business partnering, or budget management.</li><li>Previous experience supporting a Marketing, Communications, Events, Media, or Sponsorships function is preferred.</li><li>Experience managing budgets, purchase requisitions, purchase orders, contracts, invoices, and vendor relationships.</li></ul>

Job Title: Costing & Budget Controller. Role Purpose: The Costing & Budget Controller is responsible for planning, monitoring, and controlling project budgets and costs to ensure financial efficiency and alignment with project objectives. The role adds business value by enabling data-driven decision-making, enhancing cost transparency, and optimizing resource allocation to improve overall project performance and financial outcomes.<br>Key Activities:Develop and maintain detailed project budgets aligned with scope and cost estimates Validate cost assumptions and ensure alignment with project requirements Update budget forecasts based on project progress and financial performance Monitor actual costs against approved budgets and identify variances Analyze cost performance and determine root causes of deviations Implement cost control measures and recommend corrective actions Prepare accurate and timely cost and budget reports Deliver variance analysis and financial insights to support decision-making Ensure consistency, reliability, and transparency of financial data Maintain cost control systems and ensure data integrity across tools Enhance reporting efficiency through system improvements and automation Support digital transformation initiatives and automation of cost reporting processes Coordinate with IT teams for system updates and enhancements Collaborate with project, procurement, and finance teams on cost-related matters Support project planning, budgeting, and resource allocation activities Provide cost insights during project reviews and performance discussions<br>Necessary Knowledge and Experience:5–8 years of experience in cost control, budgeting, or project finance Strong understanding of construction cost structures and project lifecycle Industry experience in EPC, construction projects, or similar sectors is required Experience in budget preparation, cost tracking, and variance analysis<br>Education and Certification Minimum Requirements:Bachelor’s degree in Engineering, Finance, or related field Preferred: PMP (Project Management Professional), Cost Control / Project Control certifications<br>Job Specific Technical Skills:Strong Excel and financial modeling skills Proficiency in ERP systems (e.g., SAP, Oracle) Knowledge of cost control tools and reporting systems Ability to perform variance analysis and forecasting Proficiency in Power BI and dashboard development for reporting and data visualization

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Qiddiya is building a new kind of city, a city of play, creativity and experience.<br> The residential programme sits at the heart of that ambition.<br> In this role, you’ll influence early design decisions, make sure budgets drive outcomes, and lead a consistent cost planning approach across every villa and townhouse development.<br> You’ll work closely with development teams, challenge assumptions and translate technical detail into simple, practical advice that non-technical teams can use.<br> We’re looking for a Director of Cost Planning who knows how to plan the cost, not cost the plan .<br> Someone who can bring consistency, clarity and confidence to how we develop the residential product across Qiddiya’s Residential Business Unit.<br> (!!!) This is a pure cost planning role, not project controls, not procurement and not about measuring bills of quantities.<br> WHAT YOU’LL DO • Lead a consistent cost planning approach across all villa and townhouse assets.<br> • Ensure budgets shape design and cost vs value is tested at every stage.<br> • Provide early cost advice that steers feasibility, layouts and design direction.<br> • Support development teams with simple, structured cost insight they can use.<br> • Manage and challenge external cost consultants to deliver clear, reliable cost plans.<br> • Build and maintain benchmarking that supports fast, informed decision making.<br> • Produce clean cost summaries and support smooth Stage Gate progress.<br> • Explain complex technical matters in a clear, straightforward way for non-technical teams.<br> • Work closely with design, development, procurement and finance to keep decisions on track.<br> Strong Middle East experience, ideally delivering villas, townhouses or low-rise residential projects.<br> 15+ years in cost planning and related roles Proven client-side cost planning experience.<br> Confidence in leading design-to-budget discussions and challenging inefficient design.<br> Solid technical capability in Cost Planning, feasibility, benchmarking and value management.<br> Ability to translate technical cost information into simple, practical messages.<br> Collaborative mindset, strong communication skills and the ability to influence early decisions.<br> Professional accreditation such as RICS or AIQS preferred.<br></span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Who we are<br>Técnicas Reunidas (TR) group is a leading international engineering and construction company in the energy sector, with more than 65 years of experience and over 13,000 professionals worldwide. We have our headquarters in Madrid, offices in Bilbao and Cartagena, and engineering centers in India, Abu Dhabi, Saudi Arabia, Turkey, and Chile, among others, offering career opportunities in a truly international environment. Our commitment to people has been recognized with the Top Employer certification in Spain, Saudi Arabia and India.<br>Global projects and the energy of the future<br>At TR, we deliver projects in Oil & Gas, Power, and we are advancing toward the energy of the future through hydrogen, clean fuels, and carbon capture projects, integrating digitalization, AI, and robotics. Our high level of professionalism and commitment drives continuous research to improve efficiency and sustainability, always in strict compliance with the law and aligned with the highest ethical standards. We are looking for a SR. TECHNICAL SAFETY FOR ENGINEERING DESIGN <br>Main responsibilities<br>Preparation and review of deliverables related to Technical Safety/Environmental, as minimum but not limited to such as Health, Safety & Environmental (HSE) Management Plans, HSE Philosophies/Specifications, studies & reviews, HAZOP Management and review, SIL Determination, Hazardous Area Classification, BAT/ALARP studies, Noise Specification, Noise Report Management, Emission Modelling Report, HSE Action Tracking Management, impact and emission calculations and safety equipment specification. Experience in RISK ANALYSIS STUDIES QRA, FESA, COMAH, Consequence analysis, etc. Experience in participation in numerous workshops as a Technical Safety/Environmental Engineer to advise on technical safety related aspect and concerns at HAZOP, HAZID, ISD, BOW TIE, 3D Model Review, HFE Review, Construction HAZID, etc. Ensure compliance with HSE international and specific country legal requirements (Safety and Environmental)<br>Required profile and experience<br>Bachelor of Engineering in the Chemical discipline or equivalent. Possess a minimum of 12 years of working experience as Technical safety specialists and demonstrate experience in EPC companies or Engineering Companies. Significant experience in engineering design of oil and gas facilities. Self-directed and self-motivated (SD/SM) employee Able to work on a project with minimum supervision/Stand alone A strong background in onshore facility and brownfield project experience is an advantage. Skilled in Physical Effects Modelling and Quantitative Risk Assessment, experience with PHAST, FLARESIM, ALOHA, EFFECTS, EXsilentia software Effective communicator who can influence key stakeholders Strong knowledge of the Hazardous area classification, SCE/PS, EERA, FERA and other loss prevention analysis and risk assessment Knowledgeable in technical safety design standards such as NFPA, EPA, NIOSH, IP, ISO, ASME, API, etc. Additional knowledge of Russian Normative is an advantage. Experience as facilitator of HAZOP, HAZID, SIL Determination, ALARP and ERP Workshop, among others. Experience developing Radiation and Dispersion modelling using Flaresim software (or any similar software) to develop Flare Assessment (distances, emission, and radiation), review the simulations, analyses and Report. Review engineering interdisciplinary documents during the engineering stage. Preparing OFFERS and BUDGETS for Projects Monitoring manhour budget and prepare weekly workplan and updating project progress Ensure the schedule and deliverables dates are met with a high quality deliverables and action. Prepare specification, RFI/RFP and TBE for technical safety items.<br>What we offer<br>Employeer: Tecnicas Reunidas Global for Engineering Consultants Co. LTD48h per week ( Fridays and Saturdays off) Health and well-being programs (physical and emotional) Health insurance Study grants, continuous training, and professional development<br>Diversity and equality<br>At Técnicas Reunidas, we have a strong commitment to equal opportunities for women and men, as well as to diversity. To this end, we carry out rigorous recruitment processes that ensure these principles.

Area Director Riyadh, Saudi Arabia Lead one of the Middle East's fastest growing Data Centre engineering teams.<br>At Black & White Engineering, we're delivering some of the world's most advanced mission critical facilities for global clients. As our presence across Saudi Arabia continues to grow, we're looking for an experienced Area Director to lead our Riyadh office and play a key role in shaping the next phase of our regional success.<br>This is far more than an operational leadership position. You'll be responsible for developing our people, strengthening client relationships, driving commercial performance and ensuring exceptional project delivery across a multidisciplinary engineering team. Working closely with Regional leadership, you'll influence business strategy while helping expand our presence in one of the world's most exciting construction markets. If you're passionate about leading high performing teams, developing client partnerships and delivering technically complex projects, we'd love to hear from you.<br>What you'll be doing You'll lead the Riyadh office across every aspect of its performance, including:Leading, mentoring and developing a multidisciplinary engineering team. Driving profitable project delivery while maintaining the highest technical and quality standards. Developing and executing the office business plan aligned with regional objectives. Building long term relationships with key clients, partners and stakeholders across Saudi Arabia. Supporting business development, winning new work and identifying opportunities for growth. Providing commercial oversight including forecasting, project profitability, fee management and risk mitigation. Ensuring projects are delivered efficiently through effective resource planning and utilisation. Leading recruitment, succession planning and talent development to support continued growth. Promoting innovation, continuous improvement and operational excellence across the office. Representing Black & White Engineering with clients, industry bodies and at professional events.<br>What's in it for you? Joining Black & White Engineering means becoming part of a business that's growing rapidly across the globe while maintaining a collaborative and people focused culture. You'll benefit from:The opportunity to lead one of our flagship offices in Saudi Arabia. Working on some of the world's largest and most technically challenging Data Centre projects. Significant influence over business growth and strategic direction. Career progression within a rapidly expanding international consultancy. Collaboration with industry leading technical experts across multiple regions. A supportive leadership team that encourages innovation and professional development. The opportunity to build, develop and shape your own high performing team. Exposure to international projects and global clients. We'd love to hear from you if you have Significant experience leading multidisciplinary MEP engineering teams. A proven background delivering large, complex building projects, ideally within Data Centres or mission critical environments. Strong commercial acumen with experience managing project profitability, forecasting and financial performance. Experience developing client relationships and contributing to business growth. Excellent leadership, coaching and people development skills. Strong understanding of project governance, quality management and risk management. Experience working across international projects and multidisciplinary teams. A degree in an appropriate Engineering discipline. Chartered Engineer status (or working towards Chartership) is highly desirable.<br>Why Black & White Engineering? Black & White Engineering is a leading employee owned engineering consultancy specialising in the design of mission critical and high performance buildings. With offices across Europe, the Middle East, Asia and Australia, we deliver innovative engineering solutions for some of the world's most recognised organisations. Our teams are trusted to design complex, sustainable and future ready facilities, with Data Centres forming the core of our global expertise. Everything we do is guided by our values:Accountability Integrity Simplicity Supportive Quality<br>We believe our people are our greatest strength and we're committed to creating an environment where everyone can thrive, develop and make a meaningful impact.<br>Ready to lead the future of engineering in Saudi Arabia? If you're looking for an opportunity to lead a growing office, influence business strategy and deliver world class engineering projects, we'd love to hear from you.<br>Apply now and become part of Black & White Engineering's continued growth across the Middle East.