Concrete Engineer Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li><i>Requirements:</i></li><li><i>Bachelor's degree in Mechanical Engineering, Fire Protection Engineering, or a related field.</i></li><li><i>Minimum of 4 years of experience in Saudi Arabia in Fire &amp; Life Safety Engineering.</i></li><li><i>Valid membership with the Saudi Council of Engineers.</i></li><li><i>Strong practical experience in fire protection design, code review, authority approvals, and engineering supervision.</i></li><li><i>Comprehensive and in-depth knowledge of the Saudi Building Code (SBC), particularly SBC 201 and SBC 801, and extensive familiarity with NFPA standards and requirements.</i></li><li><i>Ability to interpret code requirements, reference code sections and clauses, and apply them effectively in engineering design and project execution.</i></li><li><i>Experience in preparing design calculations, technical reports, shop drawing reviews, and coordination with relevant authorities.</i></li><li><i>Preferred Qualifications:</i></li><li><i>Extensive experience in Fire Alarm, Fire Fighting, Life Safety, Smoke Management, and Code Compliance.</i></li><li><i>Experience with Civil Defense requirements and project approvals within Saudi Arabia.</i></li><li><i>Strong communication and technical reporting skills.</i></li><li><i>Note: Preference will be given to candidates possessing advanced and comprehensive knowledge of SBC and NFPA requirements rather than general familiarity with the codes.</i></li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Key Responsibilities:</li><li>Prepare, review, and develop Fire &amp; Life Safety (FLS) Reports, code compliance studies, and technical assessments in accordance with the Saudi Building Code (SBC) and NFPA standards.</li><li>Conduct comprehensive code reviews to ensure full compliance with SBC requirements, particularly SBC 201 and SBC 801, and all applicable NFPA standards.</li><li>Interpret, analyze, and apply code provisions and requirements to engineering designs, technical submissions, and project documentation.</li><li>Prepare and review fire protection system designs, calculations, specifications, and technical reports for various project types.</li><li>Review architectural and MEP drawings to verify compliance with fire and life safety requirements and identify potential code deficiencies.</li><li>Provide technical guidance and propose engineering solutions to address code-related comments and non-compliance issues.</li><li>Coordinate with authorities having jurisdiction (AHJs), consultants, and project stakeholders to obtain necessary approvals and ensure regulatory compliance.</li><li>Review shop drawings, material submittals, method statements, and as-built documentation for compliance with project requirements and applicable codes.</li><li>Participate in site inspections, testing, commissioning, and final acceptance processes related to fire protection and life safety systems.</li><li>Maintain up-to-date knowledge of amendments and updates to SBC and NFPA standards and ensure their effective implementation in projects.</li><li>Essential Requirement:</li><li>The candidate must possess strong and comprehensive expertise in SBC and NFPA codes, with the ability to reference specific code sections and clauses, prepare code compliance reports, and ensure full adherence to all applicable fire and life safety requirements</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Wood is currently seeking a Planner III to support our Projects business in Al Khobar. Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws. What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. If you don t meet every requirement listed, but believe you have relevant experience, knowledge, or transferable skills, we encourage you to apply. Some roles may include mandatory qualifications or legislative requirements that cannot be adjusted. Where this applies, these criteria will be clearly highlighted. For all other aspects of the role, we are open to considering a wide range of backgrounds and experiences. It will take all of us working together to deliver solutions to the world s most critical challenges</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Expected: Degree in Engineering is a must. Minimum overall relevant experience 10 years. Minimum of 5 years experience within a similar Engineering Company environment. Experienced user of Primavera P6. Able to create and manage EPC project schedules. Knowledge of ARAMCO standards and procedures. Expertise in SAEP-331 standards Practical applied experience in planning and scheduling. Ability to prepare and update Level II/III resource-loaded schedules Understands and applies planning theory, process, and best practices. Capable of the development and maintaining of performance targets. Expertise on project controls and planning tools. Knowledge of spreadsheets and databases. Team player with a willingness to share ideas with multi-disciplinary team members. Able to communicate with all levels up to top management. Good interpersonal, written and oral communication skills. Good numerical, analytical and literacy skills with a strong attention to detail. Possess good planning and organizational skills and be accustomed to meeting tight deadlines.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Key Responsibilities </p><p>1. Estimation &amp; Tendering</p><ul><li><p>Study, analyse, and interpret tender documents, drawings, BOQs, and technical specifications.</p></li><li><p>Prepare detailed and accurate cost estimates covering manpower, materials, equipment, subcontracting, overheads, and margins.</p></li><li><p>Identify project scope, risks, assumptions, and exclusions during estimation.</p></li><li><p>Obtain and evaluate quotations from suppliers and subcontractors.</p></li><li><p>Conduct site visits when required for scope verification and risk assessment.</p></li><li><p>Prepare and submit technical and commercial proposals within defined deadlines.</p></li><li><p>Support Business Development with budgetary and preliminary estimates for new opportunities.</p></li><li><p>Maintain and update databases for standard rates, productivity norms, and historical cost data.</p></li></ul><p>B. Planning &amp; Scheduling</p><ul><li><p>Develop detailed project schedules (baseline and revisions) covering mobilization, execution, shutdown, and demobilization phases.</p></li><li><p>Prepare manpower loading plans, equipment deployment schedules, and</p></li></ul><p>material planning inputs.</p><ul><li><p>Coordinate with Project Managers, site teams, procurement, and operations for effective resource planning.</p></li><li><p>Prepare and update look-ahead schedules in line with client and site requirements.</p></li><li><p>Develop and maintain S-curves, resource histograms, and progress charts for management review.</p></li><li><p>Monitor actual progress against planned schedules and identify delays, constraints, and recovery measures.</p></li></ul><p>C. Project Control &amp; Reporting</p><ul><li><p>Track daily manpower, equipment utilization, and productivity.</p></li><li><p>Ensure timely submission of daily, weekly, and monthly progress reports to clients and management.</p></li><li><p>Support cost control, forecasting, and cash flow planning through integration of planning and budget data.</p></li><li><p>Participate in shutdown readiness reviews, coordination meetings, and project debriefs.</p></li><li><p>Prepare planning documentation and lessons-learned reports upon project completion.</p></li></ul><p>D. Coordination &amp; Support</p><ul><li><p>Coordinate with clients for progress updates, planning reviews, and reporting as per contractual requirements.</p></li><li><p>Work closely with estimation, execution, and procurement teams to exchange data and improve future tender accuracy.</p></li><li><p>Ensure compliance with company procedures, contractual requirements, and HSE standards.</p></li></ul></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Hands-on experience in SABIC / ARAMCO projects, including shutdowns, chemical cleaning, hydro jetting, and mechanical maintenance.</p></li><li><p>Strong understanding of maintenance, and turnaround scopes.</p></li><li><p>Proficiency in Primavera P6, MS Project, MS Excel, and estimation / ERP systems.</p></li><li><p>Familiar with international standards and industrial safety practices in oil &amp; gas.</p></li><li><p>Middle East experience, particularly in Saudi Arabia, is an advantage.</p></li><li><p>Strong analytical and problem-solving skills with high attention to detail.</p></li><li><p>Good communication and coordination skills with multi-disciplinary teams.</p></li><li><p>Ability to work under pressure and meet tight deadlines, especially during shutdowns.</p></li><li><p>Familiarity with P&amp;ID, isometric drawings, and plant maintenance processes.</p><ul><li><p>Bachelor’s Degree in Mechanical / Industrial Engineering or related discipline.</p></li><li><p>Minimum 5 years of relevant experience in planning and estimation within industrial services, maintenance, shutdown, and oil &amp; gas sectors.</p></li></ul></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Description</span><br><span></span><p><span><span><strong>(Saudi National Only)</strong></span></span></p><br><p><span><span><strong>Grade: </strong></span></span><span><span>G05</span></span></p><br><p><span><span><strong>Location:</strong></span></span><span><span> RIYADH</span></span></p><br><p><span><span><strong>Working hours: </strong></span></span><span><span>full time</span></span></p><br><p><span><span><strong>Advert closing:</strong></span></span><span><span> 23/07/2026</span></span></p><br><p><span><span><strong>JOB PURPOSE: </strong></span></span></p><br><p><span><span>Responsible to the RSAF Directorate of Communications and Information Technology (DCIT) Network Engineering and Computer Center (NECC) for the administration, maintenance, security, and operational support of Microsoft Active Directory services, Docker and Kubernetes services, and Red Hat OpenShift enterprise platforms, ensuring stable, secure, and highly available services.</span></span></p><br><p><span><span><strong>Responsibilities</strong></span></span></p><br><p><span><span>• Maintain and support enterprise identity infrastructure</span></span><br><span><span>• Ensure reliability and operational readiness of Docker/Kubernetes/OpenShift environments</span></span><br><span><span>• Perform system upgrades, patching, backup verification, and health checks</span></span><br><span><span>• Troubleshoot authentication, infrastructure, and container platform incidents</span></span></p><br><p><span><span><strong>Job Requirements:</strong></span></span></p><br><p><span><span>• Strong experience in Microsoft Active Directory administration and troubleshooting •Experience with Docker and Kubernetes Services administration,</span></span></p><br><p><span><span>• Experience with Red Hat OpenShift Container Platform administration</span></span></p><br><p><span><span>• Knowledge of Windows Server, DNS, DHCP, Group Policy, and LDAP</span></span></p><br><p><span><span>• Experience with Identity and Access Management concepts</span></span></p><br><p><span><span>• Familiarity with Linux operating systems and enterprise virtualization</span></span></p><br><p><span><span>• Ability to troubleshoot infrastructure and platform-related issues</span></span></p><br><p><span><span>• Administer and maintain enterprise Active Directory environments</span></span></p><br><p><span><span>• Deploy, configure, and support Docker and Kubernetes services</span></span></p><br><p><span><span>• Deploy, configure, and support Red Hat OpenShift clusters</span></span></p><br><p><span><span>• Manage Group Policies, DNS, DHCP, and authentication services</span></span></p><br><p><span><span>• Monitor platform performance, availability, and security compliance</span></span></p><br><p><span><span>• Coordinate with infrastructure and cybersecurity teams</span></span></p><br><p><span><span><strong>SAUDI NATIONAL EMPLOYEE BENEFITS</strong></span></span></p><br><p><span><span>In return for the required high levels of commitment and hard work you will receive a competitive salary and benefits package, including a generous leave and leave allowance, a full health care scheme and access to discounted gym membership.</span></span></p><br><p><span><span><strong>BAE Systems</strong></span></span></p><br><p><span><span>BAE Systems has a heritage of commitment to the Kingdom of Saudi Arabia. For 50 years, we have provided the platforms and services that support the Saudi armed forces to defend the interests of the Kingdom. In support of the Saudi Arabia National Objectives, we’ve invested heavily in the development of Saudi people, technology, infrastructure and local companies in the defence supply chain. Our investments have helped to</span></span></p><br><p><span><span>develop the Saudi defence industry as well as developing a skilled and highly productive workforce.</span></span></p><br><p><span><span>(BAE Systems KSA is committed to the full inclusion of qualified people with disabilities. As part of this commitment, BAE Systems KSA will ensure that persons with disabilities are provided with reasonable accommodation during the job application or interview process, and or to perform essential job functions).</span></span></p><br><p><span><span>Note: All appointments in Saudi Arabia are subject to receipt of all necessary Government and/or Customer approvals..</span></span></p><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Maintenance Planning & Execution: Develop and implement inspection, maintenance, and repair schedules for all mechanical systems and equipment, including gas turbines, steam turbines, generators , condenser, heat recovery steam generators (HRSG), pumps, compressors, HVAC and other ancillary systems Ensures necessary tooling Ensures necessary Third-Party Certification Team Leadership: Lead, mentor, and supervise a team of mechanical maintenance engineers and technicians to ensure efficient maintenance operations and achieve targets & objectives Foster a culture of safety, compliance, and continuous improvement among team members Technical Support: Provide technical guidance and support to maintenance staff for troubleshooting and problem resolution of mechanical issues Provide in housetraining to enhance the team skills technically & safety Conduct root cause analysis of mechanical failures and implement corrective measures Project Management: Plan and oversee mechanical maintenance projects, ensuring they are completed on time and within budget Coordinate with other departments (operations, electrical, and instrumentation) to schedule maintenance work with minimal disruption to plant operations Budget and Resource Management: Assist the Maintenance Manager in the preparation of the annual maintenance budget and manage resource allocation effectively Monitor maintenance costs and identify opportunities for cost reductions without compromising safety or reliability<br><br>6 . Procurement & Storage<br><br> Ensures adequate inventories of spares and consumables and ensure timely procurement for the efficient operation To prepare purchase requisitions for spare parts and consumables<br><br>To perform technical evaluation of quotations received from purchase department and recommend appropriate choice.<br><br> Compliance and Safety: Ensure compliance with environmental regulations, safety standards, and industry best practices Conduct regular safety audits, risk assessments, and initiate safety improvement programs Ensure compliance of Corporate and site specific procedures and Work Instructions Documentation and Reporting: Maintain accurate records of maintenance activities, equipment performance, and inventory Prepare detailed reports on maintenance work, performance metrics, and project status for management review KPIs development, implementation and tracking, Continuous Improvement: Identify and implement improvement initiatives in mechanical maintenance processes and workflows Stay abreast with industry trends, advancements in technology, and maintenance best practices<br><br>10 Pre-PCOD role<br><br> support the Owner during the design review phase and during installation, commissioning, testing, and trial operation period O & M manuals and Initial Spare Parts list Review and finalization Development of Master Equipment List Development and implementation of CMMS Spares and maintenance strategy identification based on Criticality study of equipment Prepare site specific maintenance procedures and Work Instructions Ensure Maintenance team authorization as Permit Receivers Ensure timely placement of subcontracts ensure readiness for the operational period, by ensuring that all staff are trained and that all the systems and process required for O&M operations are ready ensure that the plant is fit for purpose to be taken-over and the plant is designed, built, commissioned and tested as per the EPC Contract and other Project Agreements<br><br>Requirements<br><br>Education: Bachelor's degree in Mechanical Engineering or a related field<br><br>Experience: Minimum of 10 years of relevant experience in mechanical maintenance, in large scale combined cycle power Plant. IPP and Siemens GT experience is preferred.<br><br>Leadership Skills: Proven experience leading maintenance teams, with strong interpersonal and communication skills.<br><br>Technical Skills: Proficiency in mechanical maintenance systems, reliability engineering, and condition monitoring techniques.<br><br>Software Knowledge: Familiarity with maintenance management software (CMMS) and Microsoft Office Suite.

Job Purpose / Objective: <br>Responsible for owning the end-to-end technical pre-sales lifecycle for satellite connectivity solutions across enterprise, telecom, oil & gas, and other mission-critical satcom customers. Acting as the technical authority throughout the sales cycle, this role ensures that proposed solutions are technically sound, operationally deliverable, and commercially competitive. the role serves as the bridge between Sales, Engineering, Product, and Network Operations, translating customer requirements into scalable, high-performance satellite solutions and ensuring a seamless transition from deal signature to service delivery.<br><br>Key Accountabilities: <br>1. Technical Pre-Sales Ownership:Own technical pre-sales activities from opportunity qualification through contract signature. Ensure proposed solutions are feasible, compliant with product and operational capabilities, and aligned with delivery readiness. Drive technical win strategy in close coordination with the Sales Director and commercial teams.<br>2. Customer Discovery & Solution Shaping:Lead structured customer discovery sessions and technical workshops to capture requirements, constraints, and success criteria. Assess applications, traffic profiles, SLA/SLI expectations, security requirements, integration dependencies, timelines, and commercial assumptions. Translate business and operational needs into robust, end-to-end satellite connectivity solutions.<br>3. Solution Architecture & Engineering:Design and validate satcom solutions including Enterprise broadband and private networks, Telco backhaul and trunking, Industrial, energy, and oil & gas connectivity. Perform and validate core satcom engineering activities, including link budgets, antenna sizing, coverage analysis, availability targets, and throughput modeling. Support capacity planning discussions using HTS concepts, beam allocation, contention models, CIR/MIR assumptions, gateway constraints, and QoS impacts.4. Technical Engagement & Customer Communication:Lead technical presentations, solution positioning, and customer Q&A sessions. Clearly articulate performance, availability, latency, resiliency, and operational trade-offs. Act as the primary technical point-of-contact for customers throughout the sales cycle.<br>5. Proposal Development & Documentation:Produce high-quality technical deliverables including High-Level and Low-Level Designs (HLD/LLD), Architecture diagrams and Bills of Materials (BoMs), Service descriptions and implementation plans, Acceptance criteria and operational handover packs. Lead and contribute to RFI, RFP, and RFQ responses with clear, defensible technical narratives.<br>6. Demos, Trials & Proof of Concepts:Define, plan, and execute technical demonstrations, trials, and PoCs. Establish scope, test plans, success metrics, acceptance criteria, and resource requirements. Manage vendors and partners during trials and drive successful conversion to production services.<br>7. Operational Readiness & Risk Management:Validate alignment between technical scope, product capabilities, and operational readiness. Identify and de-risk delivery dependencies including terminals, hubs, gateways, teleports, field services, and regulatory/licensing constraints prior to contract signature. Ensure clean and structured handover to Operations and NOC teams post-signature.<br>8. Cross-Functional Collaboration & Scaling:Coordinate closely with Engineering, Product, and Operations to validate feasibility, manage roadmap gaps, and resolve technical risks. Contribute to scaling the pre-sales function by developing reusable solution templates, proposal content, and best practices. Mentor junior engineers and support the gradual build-out of a solutions engineering team.<br><br><br>Qualification / Experience Education:Bachelor’s degree in Telecommunications, Electrical Engineering, Aerospace Engineering, Computer Engineering, or a related technical discipline. Certifications in satellite communications or networking are an advantage. Experience:8–12+ years of experience in satellite communications, telecommunications, or network engineering, with significant exposure to technical pre-sales or solutions engineering. Proven experience supporting enterprise, telco, and industrial connectivity solutions in a customer-facing role. Strong track record of leading complex pre-sales engagements from discovery through deal closure. Experience working across GEO/LEO/MEO systems, HTS platforms, gateways, and ground infrastructure.

Job Purpose Follow the day-to-day operations, Control the service reports delivered to the client Prepare and follow up quotations to the client, Follow up the client and suppliers contracts Ensure good response time to the client from his team Design high level electrical drawings, specifications, calculations, charts and graphs. Understand project controls, cost estimates, quantity takeoffs and manpower requirements for proposals, forecasts and change orders. Maintain high customer satisfaction and help achieve Enova’s business objectives.<br>Key Accountabilities Requires a broad knowledge of the application of engineering to plant and buildings operations and maintenance. Performs assignments independently with instruction as to the general results expected and with guidance from Department Manager on unusual or complex problems. Provides technical direction and on-the-job training to team leaders, supervisors and technicians. Assigns and coordinates work to team leaders, supervisors and technicians Plan, schedule, conduct, and coordinate program of assigned engineering work and projects. Running quality checks to make sure systems are working properly and safely Diagnosing and fixing faults Carrying out planned maintenance. Performs assignments independently with instruction as to the general results expected and with guidance from Line Manager on unusual or complex problems. Ensure proper interdisciplinary coordination and effective communication on projects. Analyze reports, maps, drawings, tests, and other data to plan and maintain installations. Direct and/or participate in job site visits to collect or deliver services. Operate computer-assisted engineering and design software and equipment to perform engineering tasks. Direct and coordinate small installations, maintenance, support, documentation, and testing activities to ensure compliance with specifications, codes, and customer requirements. Inspect completed installations and observe operations, to ensure conformance to design and equipment specifications and compliance with operational and safety standards. Provide technical assistance to field personnel in the areas of low/medium voltage distribution equipment and low/mediumvoltage motors/generators Respond and provide technical assistance to electrical equipment problems within the clients’ facilities Issue repair reports at the conclusion of critical jobs for proper historical documentation Identify engineered resolutions to recurring electrical issues Improve plant/equipment reliability through historical trending and improved maintenance procedures. Lead and participate in Failure Analysis and Vulnerability studies. Execute equipment maintenance strategies (predictive and preventive) Prepares reports by collecting, analyzing, and summarizing information and trends. Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications, establishing personal networks; participating in professional societies. Prepare timely and accurate departmental statements and reports to meet and department requirements, policies and standards. Ensure all relevant quality, health, safety and environmental procedures, instructions and controls are adhered to so that the safety of employees, quality of products/services and environmental compliance can be guaranteed. Liaise with the HSEQ department for creating standard operating procedures Timely issue and send the incident reports to HSEEQ department Support the HSEQ staff for investigating the incidents Finalize and update the HIRA with support of HSEQ staff Implement the risk control measures arising from the HIRAConduct toolbox & SOP training whenever the supervisor is deemed incompetent about the topic Prepare the yearly schedule of toolbox and SOP training with support HSEQ staff Ensure relevant emergency tests are conducted Perform other related duties or assignments as directed.<br>Qualifications, Experiences, & Skills Bachelor’s Degree in Engineering (4+ years Degree)2-4 years’ experience in technical maintenance with exposure to Facilities Management especially in the areas of Electrical & Mechanical Engineering

Work with Us. Change the World.<br><br>At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations.<br><br>There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.<br><br>We're one global team driven by our common purpose to deliver a better world. Join us.<br><br>Job Description<br><br> Under general supervision, performs routine duties. Displays knowledge and abilities to evaluate, select and apply standard engineering techniques, procedures and criteria to meet basic engineering and construction specifications. Displays applications of sound professional judgment on details of work. Independently performs walk-downs and inspections of installed commodities to assure conformance with specifications and design. Performs quantity surveys for tracking and reporting. May provide technical direction to drafters, technicians, and surveyors. <br><br>Additional Information<br><br>At AECOM, we are committed to maintaining a secure and trustworthy recruitment process and take any fraudulent hiring activity seriously. To support this commitment, all newly hired employees are required to attend an in-person Day 1 onboarding at an AECOM office location as a condition of employment.<br><br>About AECOM<br><br>AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan.<br><br>AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2025. Learn more at aecom.com.<br><br>What Makes AECOM a Great Place To Work<br><br>You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity.<br><br>As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.</p><p><br></p><p><b>Reimagine What’s Possible </b></p><p><br></p><p><br></p><p><b>Roles &amp; Responsibilities:&nbsp;</b></p><ul><li>Primary role will represent DT Plant Computing engineering efforts on the NEOM Green Hydrogen program located in NEOM, KSA.&nbsp;This person will be embedded in the day-to-day efforts and work closely with the Air Products Engineering centers in the US and India.&nbsp;&nbsp;&nbsp;</li><li>The potential candidate is required to have hands-on field experience in an active construction / project sites before operational phase.</li><li>The role will work with Process Automation Engineers to build and deploy control systems for the NEOM Green Hydrogen plant projects and control system as included in the projects.&nbsp;</li><li>Participate in Industrial Control System cybersecurity assessments and deployments.</li><li>Configure and install PCs and Servers for Process Control Applications.</li><li>Participate in troubleshooting issues identified during testing and also any issues related to the DT activities during commissioning and start up as related to the Process Control PCs and Servers.</li><li>Develop Zone &amp; Conduit Diagrams and Purdue Enterprise Reference Architecture models for Process Control Systems.</li><li>Develop, design, configure and deploy Plant Floor applications for malware, antivirus, disaster recovery, safelisting, asset management, remote access, intrusion detection and various other layers of protection for OT assets.</li><li>Work with vendors and follow industry best practices for proper infrastructure support.</li><li>Optimize work processes and implement automation to drive service efficiency and productivity.</li><li>Help train, orient, bring up to speed new team members.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>What we’re looking for:</b></p><ul><li>Bachelor’s degree in Information Technology, Computer Science, or an Engineering discipline (Chemical, Mechanical or Electrical), or equivalent work experience.</li><li>15+ years DT experience or comparable experience with process control systems</li><li>Experience with Windows PC Operating Systems (Windows 7, Windows 10, Windows 11) and Windows Server Operating Systems (Windows 2016, 2019, 2022)</li><li>Experience with Symantec Endpoint Protection, Acronis Backup, Netop Remote Control, and McAfee Application safelisting</li><li>Experience with networks (TCP/IP network protocols, DNS, DHCP), firewalls, and Active Directory</li><li>Fluent in IEC 62443, NIST SP-800 a plus.</li><li>ISA99/IEC 62443 Cybersecurity Fundamentals Specialist Certificate a plus</li><li>Willingness to learn and develop security administration skillset&nbsp;</li><li>Familiarity with industrial control systems like Siemens PCS7,Honeywell, ABB, etc</li><li>Ability to manage multiple project priorities and competing demands</li><li>English is the common language at site.&nbsp;Good communication skills in English, leadership and teamwork skills are required, including the ability to work independently.&nbsp;</li><li>Must be a creative thinker, results oriented, focused, and attentive to detail and accuracy</li><li>Must be sharp, quick, dedicated and innovative problem solver</li><li>Must be able to safely handle physical demands of the position, including ability to lift up to 25 pounds, install equipment in tight spaces, and pull wire, cables, and run conduits as needs arise.</li></ul><p>Willingness to demonstrate technical leadership and project delivery from project site location based working.</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div> <div> <div> <div> <p> <b>JOB PURPOSE</b> </p> </div> </div> </div> </div> <div> <div> <p> <span>This role<span> </span> </span> <span>will<span> </span>be responsible for<span> Operational Quality which includes On-line Quality management of manufacturing processes, from material handling to batch making as well as Finished Good Quality Assurance ensuring dispatch of 100% consumer acceptable quality products (CRQS/PQS approach) from the factory</span>. <span> </span>With key accountability in executing Digitalization and Quality support to UMS (continuous improvement).<span> </span> </span> <span>You ll<span> be part of a team that believes in doing work that matters for people and the planet.</span> </span> </p> </div> <div> <p> <span>Because here, we<span> don t</span> <span> just </span>hire for<span> jobs. We invite you to be part of something bigger.</span> </span> </p> </div> <div> <p> </p> </div> <div> <p> </p> </div> <div> <p> <b>KEY RESPONSIBILITIES</b> </p> </div> <div> <p> <span> <span>Operational Quality Assurance:</span> </span> </p> </div> <div> <ul> <li> <p> <span> <span>To<span> </span>develop,<span> </span>lead, and drive optimization and Kaizen related to top plant and quality losses.<span> </span> </span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To<span> </span>maintain, develop, and use operational knowledge of various Digital support systems used for Quality applications.<span> </span> </span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To define Statistical Process Control methods for use in setting targets and limits for operational areas. Supports innovation funnel activities within the supply chain. Works with internal and external customers of the innovation.<span> </span> </span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To manage and ensure compliance with the quality management system through communication, training, and internal/external audits at all levels.<span> </span> </span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To lead data collection, analysis, and assignment to standard Quality loss trees in support of operational KPIs reporting.</span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To<span> </span>utilize<span> SAP QM and Unilever specifications including SAP PLM &amp; ECC and </span>supports<span> verification of use for quality purposes. </span> </span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To track and trend consumer complaint data to ensure focused improvement within gaps.<span> </span> </span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To interpret, apply, and enforce all company policies, programs, regulations, and safety/Environmental rules, report and<span> </span>communicating<span> results, issues, and improvements to relevant stakeholders. </span> </span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To lead the improvement in packaging materials, reduction of E-incidents and Quality downtimes in production lines.</span> </span> </p> </li> </ul> </div> </div> <div> <div> <ul> <li> <p> <span> <span>To ensure that all the making and packing areas<span> </span>comply with<span> the Good Manufacturing Practice (GMP) and HACCP requirements.</span> </span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To<span> </span>identify<span> and develop Quality gate controls (Q points / CCPs, etc.,) at every critical stage of receiving, processing, storage, transferring, filling, packaging, and dispatch operations of Material &amp; Finished Goods in the factory along with manufacturing and </span>logistics<span> </span>teams.</span> <span> </span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To ensure that Quality related projects are being executed on time by following up with project owners. <span> </span> </span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To support the implementation and verification of procedures to control non-conforming materials and products.<span> </span> </span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To support /<span> </span>participate<span> in structured quality improvement activities related to customer, consumer </span>issues<span> and PQS gaps. </span> </span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To support implementation and on-going verification of category / technology GMP as applicable to the site.<span> </span> </span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To support implementing and<span> </span>assessing of<span> on-going compliance to in-take control program for received materials and packaging.</span> </span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To lead PQS/DSI improvement on shop floor with Quality analysts, Process Engineers, and Operators with respect to monitoring, compliance, reporting and sharing.</span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To lead in investigation and actions implementation on complaints received from market and Mfg. Q Incident from the production lines.</span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>To<span> </span>monitor<span> and improve KPI and KAI Performance of the department.</span></span></span></p></li></ul></div></div><div><div> </div> <div> <p> <b> </b> <b> </b> </p> </div> <div> <p> <b>REQUIRED<span> QUALIFICATIONS</span> </b> </p> </div> <div> <ul> <li> <p> <b> </b> <b> </b> <span> <span>Engineering Course, preferably Mechanical and Chemical.</span> </span> </p> </li> </ul> </div> <div> <ul> <li> <p> <span> <span>Must have a logical and methodical approach on work and fluent in spoken and written Arabic and English. He must have good knowledge of UMS, SPC, six<span> </span>sigma as well<span> </span>as<span> good analytical skills along with computer understanding.</span> </span> </span> </p> </li> </ul> </div> <div> <p> <span> <span>Team player, good in communication, ability to provide training, have a logical and methodical approach to his work</span></span></p></div></div></div></section>

Design, review, and verify protection settings and logic for BESS infrastructure, including substations, transformers, and inverters. Perform calculations, coordination studies, and fault analysis for High Voltage (HV), Medium Voltage (MV), and Low Voltage (LV) protection systems. Oversee testing, pre-commissioning, and commissioning of protection relays (e.g., SECO, Siemens, ABB, or Schneider). Troubleshoot complex protection system issues, investigate trippings, and implement corrective actions. Ensure all engineering activities strictly comply with GCC standards, SEC regulations, and project safety guidelines. Coordinate effectively with site operations, sub-contractors, and grid authorities during the integration phase.

Company Description Industrial Era Factory, based in Riyadh, Saudi Arabia, delivers innovative and high-quality solutions for modern residential and commercial spaces. The company specializes in the design, manufacturing, and installation of home and office furniture, wooden décor, aluminum works, glass works, and architectural glass facades. By combining craftsmanship with modern manufacturing techniques and strict attention to detail, Industrial Era Factory provides customized solutions for individuals, businesses, and real estate developers. The organization is committed to quality, functionality, and contemporary design, creating durable products and spaces that reflect excellence. Industrial Era Factory focuses on building long-term value through reliable products, professional execution, and continuous innovation. Key Responsibilities Read and interpret architectural and engineering drawings related to aluminum works. Prepare detailed Shop Drawings for aluminum doors, windows, and façades. Prepare quantity take-offs for aluminum profiles, glass, accessories, and other required materials. Prepare Cutting Lists and manufacturing orders based on approved drawings and dimensions. Prepare schedules for aluminum profiles, accessories, quantities, and materials for each project. Review dimensions, drawings, and technical details before releasing them for production. Follow up on drawing revisions and update technical documents according to project requirements. Coordinate with Production, Procurement, Sales, and Site teams to ensure smooth project execution. Support the preparation of quotations and cost calculations for materials and manufacturing when required. Follow up on project requirements and resolve technical issues related to aluminum works. Maintain accurate technical records, drawings, quantity take-offs, and production documents. Requirements Previous experience in a Technical Office role within the aluminum industry. Good knowledge of aluminum doors, windows, curtain walls, and architectural façades. Strong ability to read and interpret architectural and technical drawings. Good knowledge of aluminum profiles, accessories, systems, and manufacturing methods. Proficiency in Auto CAD and Microsoft Excel. Experience in quantity take-off, material calculations, and preparation of cutting lists. Good communication and coordination skills. High attention to detail and accuracy. Ability to work under pressure and meet project deadlines. Previous experience working in an aluminum factory in Saudi Arabia is highly preferred.

المهام والمسئوليات التفصيلية• إجراء البحوث وتحليل الاتجاهات التكنولوجية: المعرفة والدراية بأحدث التطورات التكنولوجية في مجال تقنية المعلومات وأن يقوم بالبحث والتحليل لفهم كيفية تطبيق هذه التقنيات في منتجات الشركة.• تصميم وتطوير المنتجات والتقنيات الجديدة: تصميم وتطوير منتجات وتقنيات جديدة تلبي احتياجات العملاء والمستخدمين. قد يشمل ذلك تصميم وبرمجة تطبيقات الويب وتطوير قواعد البيانات وتحسين أداء البرمجيات وغيرها.• اختبار وتقييم المنتجات والتقنيات: إجراء اختبارات شاملة للمنتجات والتقنيات الجديدة للتحقق من جودتها وأدائها. يتم توثيق النتائج وتحليلها لتحديد المزايا والعيوب واتخاذ التحسينات اللازمة.• التعاون مع فرق العمل الأخرى: التعاون مع فرق العمل الأخرى في الشركة مثل فرق التطوير والتصميم والجودة. بحيث يتم تبادل المعرفة والخبرة والعمل سويًا لضمان تنفيذ الابتكارات والتحسينات بشكل فعال.• متابعة التطورات والمعايير الصناعية في صناعه تقنية المعلومات: متابعة التطورات الصناعية والمعايير القياسية ذات الصلة. يساعد ذلك في ضمان أن المنتجات والتقنيات المطورة تلبي المعايير الصناعية ومتطلبات الأمان والجودة والمعايير العالمية.• إعداد الوثائق والتقارير التقنية: إعداد وثائق تقنية مفصلة تشرح المنتجات والتقنيات الجديدة وكيفية استخدامها وفوائدها. يساعد ذلك في توضيح المفاهيم التقنية المعقدة وتبسيطها للمستخدمين.• متابعة البحوث والمنافسة: مراقبة البحوث والابتكارات التي يقوم بها المنافسون ومتابعة التطورات في الصناعة. يساعد ذلك على البقاء على اطلاع دائم على أحدث التقنيات والاتجاهات وضمان أن الشركة تبقى في المقدمة التكنولوجية.• التواصل والتعاون: التواصل القوي والقدرة على التعاون مع شركاء التقنية للشركة. ومتابعه تجديد تراخيص الشركة الخاصة بالتقنية مع الشركات المنتجة.• متابعة الابتكارات القانونية وحقوق الملكية الفكرية: الدراية والعلم بقوانين حقوق الملكية الفكرية وضمان الامتثال لها في عملية التطوير والابتكار.<br>الشروط الوظيفيةشهادة علمية درجة البكالوريوس او اعلى في تخصص ذي صلة مثل علوم الكمبيوتر، هندسة البرمجيات علوم البيانات، أو تقنية المعلومات ,هندسة الحاسوبخبرة في البحث والتطوير: يجب أن يكون لدى المرشحين خبرة في العمل في مجال البحث والتطوير لا تقل عن 12سنة منها 6 سنوات على الأقل في تقنية المعلومات وقواعد البيانات<br>الشهادات المطلوبة:Azure Developer Associate Azure Administrator Associate Power Platform Developer Associate Project Management Professional Certified Data Scientist Certified Web Developer

Hiring HSE Analyst |Onsite in Dammam, KSA<br>About the Client:<br>Hiring for a group of companies that spanned its verticals into multiple domains, including Contracting, Media & Communications, Real Estate, Equipment Rentals, Engineering, Academics, Travel and Tourism, etc.<br>Job Responsibilities:Collects, analyzes, and interprets data to improve workplace safety, environmental performance, and regulatory compliance. Conducting risk assessments, investigating incidents, preparing compliance reports, developing and delivering training, and collaborating with teams to implement safety initiatives and reduce hazards. This role requires a strong understanding of HSE regulations and data analysis to provide insights that support management decisions and promote a safety-first culture. EHS analyst provides support in planning, implementation and monitoring of environmental, health, and safety programs and policies to ensure compliance. Track Environmental, Health and Safety metrics including Quarterly KPIs and PPE Acknowledgement submissions. Conduct formal and systematic reviews of campus operations and activities to ensure compliance with regulations. Responsible for the accuracy and auditing of all Safety related statistics. Track safety, health and Environmental audit documents. Work with affected departments to coordinate, implement and maintain employee / trainee injury prevention strategies and program(s) Provide hazard analysis, program customization, training and EHS support to activities within the organization, creative services and scripted television production activities. Support the maintenance of EHS database of accidents and incidents. Support site in achieving EHS targets C objectives. Track all the HSE related contracts' submissions. Organize and track HSE Campaigns. HSE Records and Files control and management<br>Requirements:<br>HSE Analyst Qualifications:Relevant degrees such as bachelor's degree in engineering, Industrial, Safety, Health, Environmental Science Also, certificates in HSE Fields Desired experience for HSE analysts includes: 3-5 years in similar field<br>Skills for HSE Analyst:Microsoft Office Fluent in English Language (Speaking, Writing, Reading) OSHA / NEBOSHlocal safety regulations EHS policies, standards and compliance Environmental Health Fire Systems<br>Experience Required: 3 - 5 Years Location: Dammam, KSA Working Days: Sunday to Thursday Working Timings: 7:00 AM - 3:00 PM

Candidate Requirements:Have a background in Construction Project Management (PMC). Have 6+ years of experience. Experience should be in the same required field.<br>Duties & Responsibilities:Directly responsible for preparation of the master schedule of the project including all milestone activities for pre-design, design, tender and award, construction, and completion activities. Directly responsible for the development of the design schedule, pre-bid schedules, shop drawing and submittal schedule, separate contract schedules and occupancy schedules. Direct responsibility for preparation of monthly narrative, cost, schedule and financial reports, submission, and distribution of same. Preparation and support for development of CPM schedules and precedence diagrams for design, and the separate design and construction contract packages. Review contractor's schedules and updates and advise the Managers and Superintendents of critical activities in the design and construction schedules. Assist the Managers of Design, Construction and Superintendents with activity sequencing and resource allocation. Assist in evaluation of tenders to determine that separate contractor schedules, and any qualifications to those schedules meet overall project time requirements. Provide recommendations when actual progress deviates from scheduled progress so that work may be re-scheduled or accelerated to provide for on-time completion. Conduct analysis of alternatives and options in the programming of the works to allow "what if" considerations where market fluctuations, implementation of changes, and/or unanticipated events impact the design and construction schedule. Participate in coordination meetings as required. Perform any other task assigned to him within the limits of his job duties and responsibilities.<br>Education Requirements:BSc in Engineering (Civil or Architecture Department), or BSc in Construction Management. Fluent in English Language (Reading, Writing and Speaking).<br>Qualifications:PMP. PRMG. IPMA.<br>Required Skills:Strong Communication Skills. Strong Contractual Knowledge. Strong Numerical and Analytical Skills, with proven experience in Microsoft Applications (Excel, Power Point, Word, etc.). Excellent Time Management Skills, with proficiency in Primavera P6 and Microsoft Project. High Attention to Detail. Ability to Work with the Team.

المهام والمسئوليات التفصيلية• إجراء البحوث وتحليل الاتجاهات التكنولوجية: المعرفة والدراية بأحدث التطورات التكنولوجية في مجال تقنية المعلومات وأن يقوم بالبحث والتحليل لفهم كيفية تطبيق هذه التقنيات في منتجات الشركة.• تصميم وتطوير المنتجات والتقنيات الجديدة: تصميم وتطوير منتجات وتقنيات جديدة تلبي احتياجات العملاء والمستخدمين. قد يشمل ذلك تصميم وبرمجة تطبيقات الويب وتطوير قواعد البيانات وتحسين أداء البرمجيات وغيرها.• اختبار وتقييم المنتجات والتقنيات: إجراء اختبارات شاملة للمنتجات والتقنيات الجديدة للتحقق من جودتها وأدائها. يتم توثيق النتائج وتحليلها لتحديد المزايا والعيوب واتخاذ التحسينات اللازمة.• التعاون مع فرق العمل الأخرى: التعاون مع فرق العمل الأخرى في الشركة مثل فرق التطوير والتصميم والجودة. بحيث يتم تبادل المعرفة والخبرة والعمل سويًا لضمان تنفيذ الابتكارات والتحسينات بشكل فعال.• متابعة التطورات والمعايير الصناعية في صناعه تقنية المعلومات: متابعة التطورات الصناعية والمعايير القياسية ذات الصلة. يساعد ذلك في ضمان أن المنتجات والتقنيات المطورة تلبي المعايير الصناعية ومتطلبات الأمان والجودة والمعايير العالمية.• إعداد الوثائق والتقارير التقنية: إعداد وثائق تقنية مفصلة تشرح المنتجات والتقنيات الجديدة وكيفية استخدامها وفوائدها. يساعد ذلك في توضيح المفاهيم التقنية المعقدة وتبسيطها للمستخدمين.• متابعة البحوث والمنافسة: مراقبة البحوث والابتكارات التي يقوم بها المنافسون ومتابعة التطورات في الصناعة. يساعد ذلك على البقاء على اطلاع دائم على أحدث التقنيات والاتجاهات وضمان أن الشركة تبقى في المقدمة التكنولوجية.• التواصل والتعاون: التواصل القوي والقدرة على التعاون مع شركاء التقنية للشركة. ومتابعه تجديد تراخيص الشركة الخاصة بالتقنية مع الشركات المنتجة.• متابعة الابتكارات القانونية وحقوق الملكية الفكرية: الدراية والعلم بقوانين حقوق الملكية الفكرية وضمان الامتثال لها في عملية التطوير والابتكار.<br>الشروط الوظيفيةشهادة علمية درجة البكالوريوس او اعلى في تخصص ذي صلة مثل علوم الكمبيوتر، هندسة البرمجيات علوم البيانات، أو تقنية المعلومات ,هندسة الحاسوبخبرة في البحث والتطوير: يجب أن يكون لدى المرشحين خبرة في العمل في مجال البحث والتطوير لا تقل عن 12سنة منها 6 سنوات على الأقل في تقنية المعلومات وقواعد البيانات<br>الشهادات المطلوبة:Azure Developer Associate Azure Administrator Associate Power Platform Developer Associate Project Management Professional Certified Data Scientist Certified Web Developer

Senior Specialist – Aircraft Engineering & Maintenance (Multiple Disciplines)???? Location: Jeddah, Saudi Arabia<br>Our Client is expanding its Aircraft Engineering & Maintenance organization and is seeking experienced aviation engineering professionals across multiple technical disciplines. If you have a strong background in Continuing Airworthiness, Technical Services, Aircraft Engineering, Reliability, Configuration Management, or Aircraft Systems, we would like to hear from you. We are hiring specialists in:Aircraft Structures Support Systems Reliability IFE Reliability Engine Engineering / Powerplant Engineering Configuration Control Tooling Compliance Technical Services Continued Airworthiness (CAMO) Maintenance Programs Engineering Support<br>Key Responsibilities:Provide engineering support to ensure aircraft safety, reliability and regulatory compliance. Review and evaluate Airworthiness Directives (ADs), Service Bulletins (SBs), Engineering Orders (EOs) and other technical documentation. Investigate technical issues and develop engineering solutions. Perform engineering analysis to improve aircraft reliability and operational performance. Support aircraft maintenance, modifications, repairs and major maintenance activities. Develop engineering instructions, technical reports and maintenance documentation. Ensure compliance with GACA, EASA, FAA and OEM requirements. Support aircraft induction, lease transition, redelivery and fleet introduction projects where applicable. Liaise with OEMs, MROs, vendors and internal stakeholders to resolve technical issues. Participate in reliability reviews, audits, investigations and continuous improvement initiatives. Contribute to engineering projects that improve fleet performance, safety and operational efficiency.<br>Requirements:Bachelor's Degree in Aerospace Engineering, Mechanical Engineering or related engineering discipline. Minimum 5+ years of aircraft engineering, technical services or continuing airworthiness experience. Experience within airlines, MROs, OEMs or CAMO organizations. Strong understanding of aircraft systems and aviation regulations. Experience with one or more of the following:Aircraft Structures Aircraft Systems Powerplant Engineering Reliability Engineering Configuration Management Cabin/IFE Engineering Technical Services Knowledge of EASA Part CAMO, Part-145, Part-M or equivalent regulations. Experience using engineering/MRO systems such as AMOS, TRAX, RAMCO, OASES, CAMP or similar. Strong analytical, communication and stakeholder management skills. Ability to work within multidisciplinary engineering teams.<br>Preferred Experience We particularly welcome professionals with experience on:Airbus A320 Family Airbus A330 / A350Boeing 737NG/MAXBoeing 777Boeing 787Regional aircraft and business jets

Job Requirements Develop and implement M&V plans for energy savings performance contracting (ESPC) projects at various facilities. Analyze and normalize utility data using linear regressions and other analyses. Supervise baseline and Pre / post-installation data collection, including trend data from building automation systems, field measurements, data loggers, and performance tests. Provide technical assistance with ongoing review of data from energy management systems, including troubleshooting, diagnostics, and energy savings analysis in co-ordination with the Asset Management Team. Prepare monthly / quarterly / annual energy savings reports in line with the IPMVP protocols and facilitate the billing process with customers. Develop & implement Measurement & Verification (M&V) plans for ESPC projects. Participate in data collection and performance verification of baseline and retrofitted equipment. Conduct spot measurements and short-term data collection during the ESPC (Energy Savings Performance Contract) lifecycle as required. Analyze energy management control system’s operation, sequences and trend data for system optimization and compliance to the M&V plan. Perform on-site trouble shooting and data logging to validate and correct project performance. Prepare savings performance analysis, reporting and/or presentations for customers. Educate the customer on the results. Prepare customer Meeting Reports to document all agreements and needed actions.<br>Qualifications Bachelor’s degree in Electrical/Mechanical Engineering. Certified Measurement & Verification Professional (CMVP) is a must. Experience of BMS background is mandatory. <br> Experience Must have minimum 2-4 years of relevant work experience in similar industry. Experience with HVAC/HVAC Engineering desired, including building controls and management systems.2-3 years' experience in engineering and energy savings calculations for performance contracting, knowledge and practice of M&V protocols and guidelines.<br>Knowledge & Skills Must have functional knowledge about the workings of an energy management company / ESCO. Good interpersonal skills in maintaining business relationships with clients. Proficient in Microsoft Power BI & Excel Including VBA,Advanced Excel, Word, SQL, Access, Outlook, Tableau use and programming skills. Experience with building energy simulation software programs such as e QUEST, Energy Plus, etc. Analytical and problem-solving skills, with ability to provide sound and reliable judgment in business solutions.

Job Summary:Providing technical support and helping our customers by responding to their requests for service in a timely and efficient manner. Maintain professional reporting mechanism insuring medical equipment up time and customer satisfaction. Delivering high quality corrective maintenance, periodic preventative maintenance, and medical equipment installations.<br>Duties and Responsibilities Key Responsibilities:Installation: Expertly install and configure laboratory instruments, with a focus on CDG instruments, to meet the technical specifications and requirements of the laboratory. Maintenance: Perform routine maintenance tasks, including calibration and adjustments, to uphold the reliability and accuracy of laboratory instruments. Troubleshooting: Identify, diagnose, and resolve technical issues efficiently to minimize downtime and maintain uninterrupted functionality of CDG instruments. Preventive Maintenance: Implement proactive measures to prevent potential issues, contributing to the overall longevity and performance of laboratory equipment. Collaboration: Collaborate with laboratory staff to understand their needs, provide technical support, and offer training on proper instrument usage. Documentation: Maintain detailed records of installation procedures, maintenance activities, and troubleshooting processes for compliance and continuous improvement. Technology Integration: Stay abreast of the latest advancements in laboratory instrumentation, providing insights into potential upgrades or enhancements. Qualifications:Proven experience in the installation, maintenance, and troubleshooting of laboratory instruments, with a focus on CDG instruments. Strong analytical and problem-solving skills. Excellent communication and interpersonal skills for effective collaboration with laboratory personnel. Adaptability to evolving technologies and ability to thrive in a dynamic laboratory environment. Attributes:Detail-oriented with a commitment to maintaining instrument accuracy. Adaptable to changing priorities, able to work efficiently under pressure. Dedication to ensuring the reliability and functionality of laboratory instruments. Ability to work independently and adapt to different laboratory environments.<br>EXPERIENCE, Skills & Knowledge. Bachelor’s degree in biomedical engineering or any related field. Saudi Council of Engineers<br>Experience A minimum of 1 years' experience in related field Laboratory equipment experience is a plus and preferable. Basic network knowledge is a plus<br>Languages Proficiency in English<br>Competencies Coaching skills. Communication skills. Public relations. Team player. Data Reporting. Product knowledge. Computer skills. Quality of work. Customer service. Agility.

Provides technical and coordination support for 380 k V substation projects, ensuring compliance with specifications and standards, and overseeing design, procurement, construction, testing, and commissioning to achieve safe, on-time, and cost-effective project delivery.<br>Project Planning & Coordination Assist in developing project execution plans, schedules, and resource allocation for 380k V substation works. Coordinate with design, procurement, construction, and commissioning teams to ensure timely completion of tasks. Monitor project progress, highlight deviations, and recommend corrective actions.<br>Design & Technical Support Review engineering drawings, technical documents, and vendor submittals to ensure compliance with project specifications and international standards (IEC, IEEE, SEC, etc.). Provide technical assistance during design, installation, testing, and commissioning phases. Support the resolution of engineering issues and interface problems between civil, electrical, and mechanical works. Construction Supervision Oversee installation of GIS, transformers, protection & control systems, HV equipment, and associated auxiliaries for the 380k V substation. Ensure adherence to construction methodologies, safety standards, and quality control requirements. Conduct site inspections and verify completed work against approved drawings and specifications. Testing & Commissioning Support testing and commissioning activities of primary and secondary systems. Ensure system readiness for energization in line with project milestones. Participate in FAT (Factory Acceptance Test) and SAT (Site Acceptance Test) with vendors and clients. Stakeholder Management Liaise with clients, consultants, and subcontractors to ensure smooth project execution Support project manager in client meetings, progress reporting, and approvals Facilitate technical communication between internal and external parties<br> Required Qualifications Bachelor’s degree in engineering (Civil, Mechanical, Electrical, or related field). Postgraduate or specialized training in Power Systems, Substation Engineering, or Project Management is an advantage. Academic Qualification Strong knowledge of IEC, IEEE, SEC, and other international electrical standards. Knowledge of SCADA, RTU, and substation automation systems. Specialization / Training 5–7 years of experience in power transmission projects, with at least 3–5 years in 380k V substation projects (design, construction, testing, or commissioning).2 years’ experience in similar role. Relevant Experience