Car painter Jobs

Khidmah is seeking a skilled and motivated ELV Technician to join our Facilities Management team in Abqaiq. The successful candidate will be responsible for the installation, maintenance, troubleshooting, and repair of Extra Low Voltage (ELV) systems, ensuring all systems operate safely, efficiently, and in accordance with company and client standards.<br><br>Key Responsibilities Install, maintain, inspect, and repair ELV systems, including:CCTV Systems Access Control Systems Fire Alarm Systems Public Address (PA) Systems Structured Cabling Intrusion & Security Systems Intercom Systems Perform preventive and corrective maintenance on ELV equipment. Diagnose faults and resolve technical issues efficiently to minimize downtime. Conduct routine inspections and testing to ensure system reliability and compliance. Read and interpret technical drawings, wiring diagrams, and schematics. Coordinate with supervisors and other maintenance teams to complete assigned work orders. Ensure all work is carried out in compliance with safety regulations and company procedures. Maintain accurate maintenance records and prepare service reports. Respond promptly to emergency maintenance requests when required. Ensure tools, equipment, and materials are properly maintained and used safely.<br>Requirements Diploma in Electronics, Electrical Engineering, or a related technical field. Minimum 5 years of experience in ELV systems maintenance and installation. Previous Facilities Management (FM) experience is mandatory. Valid Saudi driving license is mandatory. Strong knowledge of ELV systems, troubleshooting, and preventive maintenance. Ability to read technical drawings and electrical schematics. Good communication and problem-solving skills. Ability to work independently and as part of a team. Willingness to work on-site and respond to emergency maintenance requirements when needed.

Khidmah is seeking a skilled and motivated ELV Technician to join our Facilities Management team in Abqaiq. The successful candidate will be responsible for the installation, maintenance, troubleshooting, and repair of Extra Low Voltage (ELV) systems, ensuring all systems operate safely, efficiently, and in accordance with company and client standards.<br><br>Key Responsibilities Install, maintain, inspect, and repair ELV systems, including:CCTV Systems Access Control Systems Fire Alarm Systems Public Address (PA) Systems Structured Cabling Intrusion & Security Systems Intercom Systems Perform preventive and corrective maintenance on ELV equipment. Diagnose faults and resolve technical issues efficiently to minimize downtime. Conduct routine inspections and testing to ensure system reliability and compliance. Read and interpret technical drawings, wiring diagrams, and schematics. Coordinate with supervisors and other maintenance teams to complete assigned work orders. Ensure all work is carried out in compliance with safety regulations and company procedures. Maintain accurate maintenance records and prepare service reports. Respond promptly to emergency maintenance requests when required. Ensure tools, equipment, and materials are properly maintained and used safely.<br>Requirements Diploma in Electronics, Electrical Engineering, or a related technical field. Minimum 5 years of experience in ELV systems maintenance and installation. Previous Facilities Management (FM) experience is mandatory. Valid Saudi driving license is mandatory. Strong knowledge of ELV systems, troubleshooting, and preventive maintenance. Ability to read technical drawings and electrical schematics. Good communication and problem-solving skills. Ability to work independently and as part of a team. Willingness to work on-site and respond to emergency maintenance requirements when needed.

The Research Technician will support the Interfacial Lab (i Lab) at KAUST by assisting with greenhouse and growth chamber operations, laboratory testing, and field trials related to biochar and soil amendment research. The role involves preparing soil substrates, monitoring plant growth, conducting soil and plant analyses, supporting irrigation and field deployments, and maintaining accurate experimental records to ensure successful execution of agricultural research projects.<br><br>Requirements<br><br>Support greenhouse and growth chamber operations, including setting up and maintaining plant growth experiments. Prepare soil substrates with biochar amendments (Carbo Soil, Sand X, and superhydrophobic sand) according to experimental protocols, and monitor plant health, growth conditions, and productivity metrics. Conduct soil and plant sample analysis, including p H, EC, nutrient composition, and water retention. Assist with field trials, soil preparation, planting, irrigation setup, soil sampling, and environmental monitoring. Maintain laboratory inventory, experimental records, and ensure compliance with laboratory safety procedures.<br>Requirements:<br>Bachelor's degree in Agriculture, Agronomy, Plant Science, Soil Science, Horticulture, or a related field. Minimum 5 years of hands-on experience in greenhouse operations, agricultural research, field trials, and soil/plant analysis. Experience with irrigation systems, greenhouse/growth chamber operations, and laboratory testing. Knowledge of biochar and soil amendment technologies is an advantage. Proficiency in soil and plant analysis, including p H, electrical conductivity (EC), nutrient composition, and water retention testing. Ability to maintain accurate experimental records, manage laboratory inventory, and follow laboratory safety procedures. Valid driving license and willingness to work at field sites when required.

Responsibilities Greet patients and obtain medical and ocular history. Perform preliminary tests, including visual acuity, color vision, depth perception, and visual field testing. Conduct tonometry and pupil dilation as directed. Operate ophthalmic equipment, including autorefractors, lensometers, slit lamps, and OCT machines. Perform and acquire ophthalmic ancillary diagnostic tests, including Optical Coherence Tomography (OCT), corneal topography, fundus photography, and visual field analysis, ensuring image quality and proper documentation. Assist in refractive procedures, including pre- and post-operative assessments for LASIK, PRK, and other refractive surgeries; prepare patients, obtain measurements, and support the care team throughout the procedure workflow. Assist ophthalmologists during examinations and procedures. Maintain accurate patient records using EHR systems. Schedule appointments and support patient flow. Sanitize, calibrate, and troubleshoot clinical equipment regularly. Coordinate with ophthalmologists regarding patients undergoing refractive procedures.<br><br>Qualification Diploma of optometry/ Optics or Equivalent Valid Saudi MOH license as an optometry/ Optics technician No prior clinical experience necessary — full training will be provided Strong interest in ophthalmology and eye care, with eagerness to learn in a surgical center environment Excellent interpersonal skills with the ability to communicate clearly and compassionately with patients High attention to detail and ability to follow clinical protocols accurately Ability to work efficiently in a fast-paced, high-volume surgical setting Basic computer literacy and willingness to learn EHR/EMR software Professional demeanor, reliability, and a strong team-oriented attitude Ability to stand for extended periods and assist with patient positioning as needed<br>.

Role Description United International Group is seeking an experienced Automation Technician to join our engineering team in Jeddah. The successful candidate will be responsible for maintaining, troubleshooting, and optimizing automated material handling equipment (MHE) and control systems to ensure maximum operational efficiency and equipment uptime.<br>Key Responsibilities Perform preventive and corrective maintenance on automated systems and conveyor equipment. Troubleshoot and repair PLC-controlled automation systems. Diagnose faults in SCADA, HMI, VFD, and electrical control systems. Monitor equipment performance and support continuous improvement initiatives. Support installation, commissioning, and testing of new automation equipment. Read and interpret electrical schematics, control drawings, and technical documentation. Maintain accurate maintenance records and reports. Collaborate with engineering, operations, and IT teams to ensure system reliability.<br>Requirements Diploma or Degree in Electrical, Electronics, Automation, Mechanical Engineering, or a related field. Minimum 5 years of experience in automation, controls, or material handling systems. Hands-on experience with PLCs, SCADA, HMIs, and VFDs. Experience working with conveyor and sortation systems. Strong troubleshooting and fault-finding skills. Ability to read electrical and mechanical drawings. Good communication skills in English.<br>Preferred Qualifications Experience in logistics, warehouse, manufacturing, or industrial automation environments. Knowledge of control system programming and industrial networking. Experience with Auto CAD, Visio, Solid Works, or similar tools. Understanding of safety standards and best maintenance practices.<br>Why Join Us? Join United International Group and become part of a team dedicated to delivering reliable, innovative, and efficient engineering solutions across the Kingdom of Saudi Arabia.<br>???? Location: Jeddah, Saudi Arabia???? Apply Now: hr@unitedintls.com

<h3 >About BAE Systems Saudi Arabia</h3> <p >BAE Systems serves as the UK Government’s nominated Prime Contractor under Government-to-Government arrangements, providing essential equipment, support, and training to Saudi Arabia. The company is responsible for the maintenance of Royal Saudi Air Force (RSAF) aircraft and for training RSAF and Royal Saudi Naval Force personnel in the safe use of their aircraft, equipment, and weapons. BAE Systems Saudi Arabia is committed to supporting the Saudi Arabian National Agenda, including Saudisation and the development of Saudi National capability through partnerships and industrialisation.</p> <h3 >The Role: Jet Engine Maintenance Technician</h3> <p >BAE Systems Saudi Arabia is seeking a <strong >Jet Engine Maintenance Technician</strong> to join its team in Al Majma'ah. This full-time role involves performing and supervising aircraft maintenance, components, and Bay support activities specifically for Engine, Propellor, and Fuel Systems. The technician will also provide On the Job Training (OJT) and Production Inspections, alongside troubleshooting, inspecting, removing-installing, repairing, modifying, and operating all Engine, Propellor, and Fuel aircraft systems, components, and associated support and test equipment.</p> <h3 >Key Responsibilities</h3> <ul > <li >Maintain good engineering practice and ensure compliance with RSAF Technical Orders within the Jet Engine / Fuel Shop.</li> <li >Prepare items for calibration within the designated work area.</li> <li >Execute TCTO’s (Time Compliance Technical Orders) and Special inspections as directed.</li> <li >Demonstrate thorough knowledge of Aircraft Safety devices and Aircraft operating areas.</li> <li >Ensure compliance with tool control procedures and the KFAA SAFO program.</li> <li >Support deployments to other bases both within and outside KSA when required, including preparing equipment for these deployments.</li> <li >Act as a Maintenance Inspection and Investigation Point (MIIP) for aircraft or ground support technical issues.</li> <li >Provide technical activities supporting KFAA mission statements and aircraft servicing programmes, including Workshop support equipment servicing, fault troubleshooting/rectification, modifications, and inspections/evaluations of components/test/support equipment at the Intermediate level maintenance.</li> <li >Offer technical specialty support in the evaluation, interpretation, determination of requisite corrective actions, and assessment of performance and operational status for specialty-specific aircraft systems, components, and test-support equipment at the Intermediate level maintenance.</li> <li >Deliver informal and formal On the Job Training (OJT) to both RSAF and BAE Systems Saudi National personnel to facilitate Saudisation of PC9/PC21 Intermediate Maintenance operations.</li> <li >Obtain and maintain necessary certifications to support specialty and aircraft maintenance functions.</li> <li >Acquire user expertise and proficiency with the RSAF aircraft data management and tracking computer system, MIRO Gold.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >A recognised qualification at NVQ3/ONC/OND/BTEC level in a relevant technical discipline, or a technical apprenticeship, or a suitable equivalent technical qualification acceptable to M&amp;CA, or a Part 66 license (current or lapsed), or a suitable equivalent technical license acceptable to M&amp;CA.</li> <li >Relevant type training (‘Q’ Course) and equipment specific training, if required.</li> <li >Extensive post-qualification practical maintenance experience within an operational flying aircraft environment, supported by formal recorded workplace applied related training; OR significant years of experience on the same aircraft type; OR successful completion of a BAESSA apprenticeship programme (SNTTP/ TSNTTP).</li> <li >Demonstrated knowledge and understanding of aircraft maintenance and engineering principles.</li> <li >Understanding and application of human factors, error management, health &amp; safety, and proactive hazard analysis, appropriate to the role.</li> <li >Must hold a current Valid SEC membership.</li> </ul> <h3 >Desirable Skills and Knowledge</h3> <ul > <li >Broad knowledge of the Aerospace and defence company / industry.</li> <li >An understanding of BAESSA engineering operating procedures.</li> </ul> <h3 >Compensation</h3> <p >A competitive salary is offered for this full-time position.</p>

<div dir="rtl"><h3 >نبذة عن الوظيفة</h3> <p >تبحث <strong >شركة سقيفة الرواد</strong> عن <strong >فني كهربائي تمديدات كهربائية</strong> للانضمام إلى فريقها في <strong >جدة، مكة المكرمة</strong>. يتولى شاغل هذا الدور بدوام كامل مسؤولية الإشراف على أعمال التمديدات الكهربائية، بدءًا من دراسة المخططات وتقدير المواد، وصولاً إلى متابعة التنفيذ وتشخيص الأعطال ومعالجتها. يتطلب الدور خبرة عملية تتراوح بين سنتين وخمس سنوات في المجال.</p> <h3 >المسؤوليات الرئيسية</h3> <ul > <li >دراسة وتحليل مخططات التمديدات الكهربائية للمشاريع المنزلية، الصناعية، والتجارية ومكوناتها بدقة.</li> <li >تقدير كميات المواد والأجهزة الكهربائية اللازمة لتنفيذ أعمال التمديدات، وتأمين التجهيزات ومطابقة مواصفاتها الفنية.</li> <li >متابعة الإشراف على تنفيذ أعمال التمديدات الكهربائية، ومراقبة تشغيل الدارات، وإجراء الفحوصات اللازمة مثل فحوص العازلية والاستمرارية والتأريض.</li> <li >تشخيص أعطال التمديدات الكهربائية وتحديد الإجراءات التصحيحية اللازمة لمعالجتها، بالإضافة إلى متابعة برامج الصيانة الوقائية.</li> <li >تطبيق جميع إجراءات وتعليمات السلامة والصحة المهنية في مواقع العمل لضمان بيئة آمنة.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >خبرة عملية تتراوح بين <strong >سنتين وخمس سنوات</strong> في مجال التمديدات الكهربائية.</li> <li >فهم عميق لمخططات التمديدات الكهربائية المنزلية والصناعية والتجارية.</li> <li >القدرة على تقدير الكميات وتأمين التجهيزات الكهربائية اللازمة للمشاريع.</li> </ul> <h3 >المهارات الأساسية</h3> <ul > <li >مهارات تحليلية قوية لدراسة المخططات الكهربائية وتحديد مكوناتها.</li> <li >القدرة على تشخيص الأعطال الكهربائية وتحديد حلولها بفعالية.</li> <li >الالتزام بمعايير السلامة والصحة المهنية في جميع الأوقات.</li> <li >مهارات تنظيمية لمتابعة تنفيذ الأعمال والصيانة الوقائية.</li> </ul> <h3 >تفاصيل الوظيفة</h3> <p >هذه الوظيفة بدوام كامل ضمن فريق <strong >شركة سقيفة الرواد</strong> في مدينة <strong >جدة، مكة المكرمة</strong>. الراتب غير معلن وسيتم تحديده بناءً على الخبرة والمؤهلات خلال عملية التوظيف.</p> <h3 >كيفية التقديم</h3> <p >ندعو المهتمين ممن تنطبق عليهم المتطلبات المذكورة أعلاه إلى تقديم طلباتهم للنظر فيها.</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong><span>QA Technician <span>| Saudi Arabia, Jeddah</span></span></strong></p><br><br> <br> <p><strong><span>The Company:</span></strong></p><br><br> <br> <p><span>Founded in 1977, Almarai Company is the world’s largest vertically integrated dairy company and the largest food and beverage manufacturing and distribution company in MENA. Headquartered in Riyadh, Almarai Company is ranked as the number one FMCG Brand in the MENA region and the market leader in all its categories across GCC, Egypt, and Jordan.</span></p><br><br> <p><span>Over five decades of sustainable growth, Almarai has consistently provided nutritious and healthy products to consumers of all ages, driven by its core principle: “Quality you can trust.”</span></p><br><br> <p><span>Almarai has expanded its product range to include, in addition to dairy products, juices and beverages, baked goods, poultry, infant formula, dates, fish and seafood, and bottled water, under more than 20 brands such as Almarai, L’usine, 7DAYS, ALYOUM, Nuralac, Farm’s Select, Ice Leaf, Almira, Seama, Oska, IVAL, Almara Pro, Premier Chef, Bakemart, and others. </span></p><br><br> <p><span>Almarai currently employs over 43,000 Quality Makers, across the GCC, Egypt &amp; Jordan. </span></p><br><br> <p><span>In 2025, Almarai reported net income of SAR 2.4 billion on sales of SAR 22 billion.</span></p><br><br> <br> <p><strong><span>About the role:</span></strong></p><br><br> <p><span>To handle RDNCNs and investigate minor QA related issues in the area of warehouse, transport, workshop and yard operation.</span></p><br><br> <p><span><br><strong>Key Responsibilities</strong></span></p><br><br> <ul> <li><span>Manage and follow up on Reefer Delivery Non‑Compliance Notifications (RDNCN) raised by the Sales Division. </span></li> <li><span>Conduct regular Good Hygiene Practice (GHP) audits across the Transportation &amp; Logistics (T&amp;L) operations. </span></li> <li><span>Perform Pre‑Requisite Program (PRP) verifications in line with quality and food safety standards. </span></li> <li><span>Support the maintenance and updating of QA databases, including GHP audit records, training logs, and QA monitoring sheets through data collection and verification. </span></li> <li><span>Assist in the preparation of weekly and monthly KPI reports. </span></li> <li><span>Monitor Non‑Conformance Notices (NCNs) and ensure timely follow‑up and closure of corrective actions with relevant stakeholders.</span></li> </ul> <br> <br> <br> <p><strong><span>Requirements:</span></strong></p><br><br> <ul> <li><span>Diploma holder in any science discipline.</span></li> <li><span>1 Year of working experience in quality function.</span></li> <li><span>English Fluency <br></span></li> </ul> <br> <p><span>Almarai offers a competitive package, generous leave, medical coverage, discretionary bonus, training, and development etc.</span></p><br><br> <br> <p><span>This is a great opportunity to join a successful and expanding global business, offering an excellent remuneration and benefits package.</span></p><br><br> <br> <br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 1+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The Mechanical / Electrical Technician is responsible for maintaining the operational readiness and serviceability of Ground Support Equipment (GSE) and specialized operational equipment.<br> The role requires strong technical knowledge, troubleshooting skills, and strict compliance with safety and operational standards.<br> Key Responsibilities Perform preventive and corrective maintenance on GSE and specialized equipment.<br> Diagnose and troubleshoot mechanical and/or electrical faults.<br> Conduct equipment inspections, testing, repairs, and routine maintenance.<br> Ensure assigned maintenance tasks are completed within the required timeframe and to high-quality standards.<br> Maintain equipment serviceability and operational readiness.<br> Follow OEM maintenance guidelines and technical procedures.<br> Perform basic troubleshooting when required.<br> Conduct daily equipment checks before release for operations.<br> Coordinate with Operations and relevant technical teams regarding equipment maintenance and availability.<br> Maintain accurate maintenance records and equipment documentation.<br> Prepare daily equipment performance and maintenance reports.<br> Ensure full compliance with operational and safety procedures.<br> Qualifications &amp; Experience Minimum Diploma in Mechanical, Electrical, Automotive, Auto Mechanic, or a related technical field .<br> Minimum 2–3 years of technical experience in maintenance, workshop operations, vehicle maintenance, or GSE maintenance.<br> Experience in preventive and corrective maintenance .<br> Previous experience with Ground Support Equipment (GSE) is highly preferred.<br> Ability to perform maintenance and troubleshooting independently.<br> Ability to understand technical manuals, drawings, and equipment instructions.<br> Ability to work with computerized systems and technical equipment.<br> Key Competencies Mechanical / Electrical Troubleshooting Preventive &amp; Corrective Maintenance GSE Maintenance Equipment Inspection &amp; Testing Technical Problem-Solving Safety Awareness Attention to Detail Teamwork &amp; Communication Ability to work under operational pressure Willingness to work rotational shifts</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

JOB PURPOSE:<br>To deliver hands-on, multi-disciplinary technical care across all integrated exhibit systems, ensuring safe, reliable, visually impeccable, and continuously available operation for public use.<br>KEY RESPONSIBILITIES & ACCOUNTABILITIES:<br>Asset Care & Maintenance Execution:Perform scheduled preventive maintenance on all assigned exhibit systems in accordance with CMMS schedules, approved SOPs, and OEM manuals. Perform daily exhibit readiness and condition inspections before public opening Execute corrective maintenance and repairs to restore exhibit functionality Perform functional testing, calibration, and verification after maintenance or resets Diagnose faults across integrated exhibit systems (mechanical, electrical, AV, control, and digital, etc.) Identify early signs of wear, degradation, or abnormal behavior and report them for corrective action Replace consumables, wear parts, and minor components before failure occurs Support reliability improvement by properly reporting repeat faults and abnormal trends<br>Vendor & System Support:Support specialist vendors during servicing, testing, and upgrades Verify exhibit functionality before and after vendor intervention Protect warranties by ensuring correct operating and maintenance practices<br>CMMS & Documentation:Ensure work orders are closed by recording all work performed in the CMMS, including findings, actions, time, and parts used.<br>Aesthetics & Visitor Experience:Maintain exhibit aesthetic integrity after every maintenance activity. Ensure panels, covers, screens, cables, and surfaces are clean, aligned, and visually acceptable.<br>Safety & Observation:Follow all safety, electrical, water, and public-protection procedures. Proactively identify and report emerging hazards caused by visitor behavior or misuse.<br><br>QUALIFICATIONS, EXPERIENCE & SKILLS:<br>Bachelor’s degree in maintenance or any related field. OR Associate Diploma in the maintenance field or any related field. Prior hands-on technician experience is preferred; exceptional fresh graduates with high potential may also be considered.

We are looking for a BMS & Control Panel Technician with hands-on experience in the assembly, installation, and wiring of electrical control panels and Building Management Systems (BMS). The candidate should be able to read electrical drawings and perform wiring, testing, and installation works in accordance with approved drawings, specifications, and standards.<br><br>Requirements2. BMS Works Qualifications & Requirements Preferred Technical Experience<br><br> Electrical Control Panel Works Assemble and install electrical control panel components. Install and wire electrical circuit breakers MCB and MCCB. Install contactors, relays, timers, and power supplies. Perform internal wiring according to approved electrical drawings. Install and organize Wire Ducts and ensure proper finishing quality. Label and identify wires and components inside control panels. Perform necessary testing and ensure the safety and quality of all connections. Install and wire BMS DDC Controllers. Connect various sensors, including Temperature, Humidity, and Pressure Sensors. Connect Actuators and Control Valves. Install and wire digital and analog I/O points (DI, DO, AI, AO). Test wiring integrity and verify connections against BMS drawings. Assist with testing and Commissioning activities under the supervision of the BMS Engineer. Technical Diploma in Electrical, Electronics, or Industrial Control. 2-5 years of experience in electrical control panel assembly and wiring and/or BMS systems. Ability to read electrical drawings and Single Line Diagrams (SLD). Good knowledge of electrical control components and BMS systems. Proficiency in using electrical testing equipment, including: Multimeter Clamp Meter Megger <br>Hands-on experience with:<br><br> Johnson Controls Siemens MCC Panels Niagara Framework KNX<br><br>Benefits<br><br>Private Health Insurance Paid Time Off Training & Development

Company Description<br>W&J Salon.spa is a women’s beauty and wellness destination dedicated to enhancing natural beauty and promoting well-being. We provide a welcoming and relaxing environment where quality, professionalism, and exceptional customer care are at the heart of everything we do. Our salon offers a range of beauty and self-care experiences, creating a comfortable and luxurious experience for every client.<br>Role Description<br>We are looking for a professional and experienced Nail Technician to join our team on a full-time basis. The ideal candidate should be highly skilled in a wide range of nail services, nail art, and current nail trends, while providing high-quality results and an exceptional client experience.<br>Responsibilities:<br>Gel extensions and nail extensions Gel polish and regular nail polish Manicures and pedicures French manicures and French nail designs Nail shaping and preparation Nail art and knowledge of current nail trends Maintaining excellent hygiene and sanitation standards Providing professional recommendations based on each client’s needs Delivering excellent customer service<br>Qualifications<br>Minimum 2 years of professional experience in a salon Professional-level nail skills with strong attention to detail Experience with a wide range of nail techniques and services Strong nail-art skills and knowledge of current nail trends Excellent knowledge of nail care, hygiene, and sanitation Ability to create clean, precise, and high-quality finishes Good communication and customer-service skills Arabic language proficiency required Ability to work professionally as part of a team Reliable, organized, and committed to maintaining a high standard of work Passionate about beauty and providing an excellent client experience

Summary:The Telecom Installation Technician is responsible for installing telecom equipment, structured cabling, fiber optic systems, and AC/DC power connections while ensuring compliance with project specifications, quality standards, and safety requirements. The role supports the successful delivery of telecom infrastructure projects.<br><br>Key Responsibilities:<br>• Install telecom equipment, including MPLS-TP, DWDM, routers, switches, and other network devices, as per approved drawings and manufacturer guidelines.• Install LAN/WAN infrastructure, including copper and fiber optic cabling, patch panels, racks, and cable management systems.• Perform AC and DC power termination for telecom equipment and panels.• Install and wire DC distribution components, including MCBs, fuses, terminal blocks, power distribution units (PDUs), and related panel accessories.• Carry out fiber optic cable laying, termination, and support fiber splicing activities.• Ensure clean, organized, and professional equipment installation, cable routing, dressing, labeling, and cable termination.• Read and interpret engineering drawings, wiring diagrams, cable schedules, and installation layouts.• Perform continuity and basic cable/fiber testing and support engineers during testing activities.• Follow project quality, safety, and housekeeping requirements at all times.<br><br>Technical Skills• Knowledge of telecom equipment installation and structured cabling practices.• Good understanding of fiber optic cable standards, laying, termination, and fiber splicing.• Knowledge of AC/DC power systems and electrical components used in telecom panels.• Ability to read electrical schematics, wiring diagrams, and installation drawings.• Familiarity with basic cable and fiber testing tools.• Experience with AC/DC power wiring and telecom panel installation.<br><br>Preferred Skills<br>• Experience working on Saudi Energy (SEC) telecom or substation projects.• Strong attention to detail with excellent workmanship in equipment installation and cable management.• Good communication and teamwork skills.

Career Overseas Consultants Ltd. is looking for Air Conditioner & Refrigerator Technician<br>Job Description / Responsibility Install, commission, and test air conditioning and refrigeration systems. Perform preventive and corrective maintenance on HVAC and refrigeration equipment. Diagnose and repair electrical, mechanical, and control system faults. Inspect and service compressors, condensers, evaporators, expansion valves, thermostats, and fan motors. Conduct refrigerant charging, recovery, leak detection, and pressure testing. Read and interpret technical drawings, wiring diagrams, and equipment manuals. Monitor system performance and recommend improvements to enhance efficiency. Replace defective parts and components as required. Ensure all maintenance activities comply with safety regulations and environmental standards. Maintain accurate maintenance records and prepare service reports. Respond to emergency breakdowns and perform troubleshooting activities. Coordinate with supervisors and other maintenance personnel to complete assigned tasks.<br>Educational Requirements SSCHSCDiploma Technical Diploma, Trade Certificate, or Vocational Training in Air Conditioning & Refrigeration Technology.<br>Experience Requirements2 to 5 year(s) The applicants should have experience in the following business area(s): Training Institutes, Engineering Firms, Real Estate, Developer<br>Additional Requirements Relevant work experience in HVAC or refrigeration maintenance will be preferred. HVAC Technician Certification. Refrigeration & Air Conditioning Trade Certificate Occupational Health & Safety Training Certificate Sound knowledge of HVAC and refrigeration systems, components, and controls. Ability to troubleshoot electrical and mechanical equipment. Familiarity with refrigerants, recovery procedures, and safety practices. Ability to read technical manuals and wiring diagrams.* Good communication and teamwork skills. Strong problem-solving and analytical abilities. Ability to work under pressure and meet maintenance schedules. Ability to work at heights, in confined spaces, and under varying weather conditions. Ability to lift and carry tools, equipment, and spare parts. Physically fit to perform maintenance and repair activities.<br>Job Location Saudi Arabia

<h3 >Role Overview</h3> <p >Petromin Corporation is seeking a <strong >PDI Stockyard Technician</strong> for a full-time position based in Jeddah, Makkah, Saudi Arabia. The primary responsibility of this role is to conduct thorough pre-delivery inspections, ensuring all vehicles meet established quality standards before being dispatched to dealerships. This involves detailed assessments of mechanical functionalities, safety features, and cosmetic conditions, with a focus on preparing vehicles for customer delivery and upholding the company's reputation for quality.</p> <h3 >Core Responsibilities: Pre-Delivery Inspection</h3> <ul > <li >Perform comprehensive pre-delivery inspections and related activities.</li> <li >Inspect vehicles for visible damage, missing major components, and loose or misaligned items such as trim, doors, and hardware.</li> <li >Record all identified discrepancies and acknowledge acceptance slips for each delivered vehicle.</li> <li >Execute repairs and replace defective items with efficiency and accuracy, adhering to dealership and factory standards.</li> <li >Ensure proper documentation and charging of warranty repairs.</li> <li >Conduct test drives to evaluate steering, brakes, transmission, and engine operation.</li> <li >Activate power equipment, including electric windows, seats, radio, horn, lights, and directional signals, to confirm specified operating standards.</li> <li >Inspect vehicle surfaces for minor chips and scratches in paint, performing touch-ups using brush applicators and factory-supplied matching paint.</li> <li >Install optional equipment as specified by the customer or dealer, and install standard components.</li> <li >Pour antifreeze into radiators according to seasonal requirements.</li> <li >Tune engines using appropriate technician tools and test equipment.</li> <li >Install or repair major mechanical, hydraulic, or electromechanical equipment such as radios, air conditioners, power steering units, and power brakes, utilizing hand tools.</li> <li >Wash, polish, and clean the exterior and interior of vehicles.</li> <li >Maintain and be accountable for all dealership-owned tools and manuals.</li> </ul> <h3 >Documentation and Reporting</h3> <ul > <li >Maintain accurate records of inspection findings, test results, and all work performed on each vehicle.</li> <li >Complete pre-delivery inspection checklists and documentation in strict accordance with company procedures and industry standards.</li> <li >Report regularly to higher management, providing timely updates on pre-delivery inspection activities and status.</li> </ul> <h3 >Quality Assurance and Safety Compliance</h3> <ul > <li >Ensure all vehicles consistently meet the quality standards and specifications set by the manufacturer.</li> <li >Identify and promptly rectify any defects or discrepancies discovered during the inspection process to ensure customer satisfaction and compliance with regulatory requirements.</li> <li >Understand, keep abreast of, and comply with federal, state, and local regulations, including hazardous waste disposal and OSHA Right-to-Know standards.</li> <li >Operate all tools and equipment in a safe and responsible manner.</li> <li >Verify that vehicles comply with all safety regulations and standards mandated by regulatory authorities.</li> <li >Confirm the full functionality of safety features such as airbags, seat belts, lights, and brakes to ensure optimal performance and occupant protection.</li> </ul> <h3 >Required Experience</h3> <p >Candidates for the PDI Stockyard Technician position should possess <strong >0-1 years of relevant experience</strong> in vehicle inspection or automotive maintenance.</p> <h3 >Company and Location</h3> <p >This full-time role is with Petromin Corporation, a prominent company, and will be based in Jeddah, Makkah, Saudi Arabia. The successful candidate will contribute to maintaining the high standards of vehicle quality and customer satisfaction.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Skin Care Technician role at our innovative market research company in Medina, Saudi Arabia, is a unique opportunity for individuals passionate about skincare and consumer insights. This position is designed for those looking to blend their technical skills with their love for skincare, as they will play a pivotal role in conducting product testing and gathering valuable data that influences market trends. As part of a dynamic team, you'll have the chance to contribute to groundbreaking research while enhancing your expertise in skincare technologies.</p><p>In this role, you will not only engage with cutting-edge skincare products but also work closely with industry professionals and researchers. Our company fosters a collaborative environment where team members are encouraged to share ideas and learn from one another. We believe in investing in our employees' growth, offering training sessions and workshops that will help you advance your career in both skincare and market research. This is more than just a job; it's a stepping stone to a fulfilling career in a thriving industry.</p><p>As a Skin Care Technician, your contributions will directly impact the development of skincare products that meet consumer needs. You'll have the opportunity to provide feedback on formulations and assist in the creation of effective marketing strategies based on your findings. With a strong emphasis on career progression, we are committed to helping you achieve your professional goals while making a meaningful difference in the skincare market.</p><p><b>Responsibilities:</b></p><ol><li>Conduct thorough skin assessments using various diagnostic tools to evaluate skin health, ensuring accurate data collection for market research purposes.</li><li>Administer product application tests and document results meticulously to provide comprehensive feedback on product performance and consumer satisfaction.</li><li>Collaborate with cross-functional teams, including marketing and product development, to align research outcomes with business strategies and consumer demands.</li><li>Engage with consumers during product testing sessions, gathering qualitative insights that will inform future product innovations and market positioning.</li><li>Maintain a clean and organized testing environment, adhering to health and safety regulations while ensuring all equipment is properly calibrated and functioning.</li><li>Participate in training programs to stay updated on the latest skincare technologies and market trends, enhancing your expertise and value to the team.</li><li>Prepare detailed reports summarizing research findings, presenting data in a clear and actionable format to stakeholders and team members.</li><li>Assist in the development of educational materials for consumers, helping them understand the benefits and usage of skincare products based on research findings.</li><li>Monitor and evaluate competitor products and industry trends to provide insights that will guide strategic decision-making within the company.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficient in skin analysis techniques and tools, enabling accurate assessments of skin conditions.</li><li>Strong communication skills to effectively engage with consumers and present findings to stakeholders.</li><li>Ability to work collaboratively within a team, leveraging diverse skills to achieve common goals.</li><li>Detail-oriented with strong organizational skills, ensuring meticulous documentation of research processes and outcomes.</li><li>Knowledge of skincare formulations and active ingredients, providing a solid foundation for product testing.</li><li>Adaptability to new technologies and methodologies in skincare research, ensuring continuous improvement in practices.</li><li>Critical thinking skills to analyze data and derive meaningful insights that influence product development.</li></ul></div>

<p>Perform professional manicure and pedicure services.<br>Apply regular nail polish, gel polish, and other nail enhancements as required.<br>Perform nail cleaning, shaping, buffing, cuticle care, and basic nail treatments.<br>Provide nail art and customized nail designs according to client preferences.<br>Remove existing nail polish, gel polish, or nail enhancements safely.<br>Assess the condition of clients' nails and recommend appropriate nail-care services.<br>Maintain proper sanitation and sterilization of nail tools and equipment.<br>Keep the workstation clean, organized, and hygienic at all times.<br>Follow company health, safety, and hygiene procedures.<br>Provide courteous and professional customer service.<br>Handle client requests and concerns professionally.<br>Maintain adequate supplies and inform management when products or materials need replenishment.<br>Assist with maintaining the overall cleanliness and appearance of the salon.<br>Perform other related duties as assigned by management.</p><p><strong>Desired Candidate Profile</strong></p><p>Female , preferably 21 years old and above.<br>Must be Vocational Graduate, preferably with NCII Nail Technician.<br>Previous experience as a Nail Technician, Manicurist, Pedicurist, or Beauty Therapist is preferred.<br>Minimum 2 year relevant experience is recommended, although candidates with formal nail-care training and good practical skills may also be considered.<br>Knowledge of basic manicure and pedicure techniques.<br>Knowledge of nail polish and gel polish application and removal.<br>Basic knowledge of nail sanitation, sterilization, and hygiene procedures.<br>Able to perform nail shaping, cuticle care, buffing, and basic nail treatments.<br>Good hand skills, attention to detail, and patience.<br>Good communication and interpersonal skills.<br>Customer-service oriented and professional in dealing with clients.<br>Well-groomed, presentable, responsible, and trustworthy.<br>Willing to work on weekends, holidays, or flexible shifts when required.<br>Physically able to stand or sit for extended periods while providing nail services.</p>

About the Company:National Care Company (NCC) is a premier manufacturing firm in Saudi Arabia, dedicated to delivering high-quality cleaning solutions across various sectors. With a workforce of over 5,000, NCC is committed to excellence, innovation, and sustainability, making it a trusted partner in households, industries, and veterinary practices nationwide.<br>Job Purpose:The Electrical Technician is responsible for performing electrical maintenance, troubleshooting, and repair activities for electrical panels, wiring, and equipment to ensure safe and reliable operation while supporting continuous production and complying with QHSE standards.<br>Responsibilities:Planning:Full knowledge of electrical panels. Knowledge of electrical wiring and connections. Ability to read electrical diagrams. Ability to detect faults and repair them.<br>Execution:Review job orders to determine work priorities. Confer with management, engineering, and quality control personnel to resolve maintenance problems and recommend measures to improve operations and conditions of machines and equipment. Schedule repair, maintenance, and installation of parts and equipment to ensure continuous production operations. Arrange specialist procurement of fixtures, fittings, or components.<br>Research & Development:Design maintenance strategies, procedures, and methods. Study current equipment and machinery to recommend solutions to improve efficiency and stability. Develop innovative solutions to reduce operating costs. Identify and capture opportunities for improvement in equipment maintainability and reliability.<br>People Management:Monitor the performance of maintenance personnel. Ensure that junior staff are adequately trained. Direct training and induction of workers to improve work performance and familiarize them with company policies and procedures.<br>QHSE:Follow QHSE procedures while setting up, welding, and handling materials. Perform safety checks on equipment before work. Use adequate personal protective equipment (PPE) according to the job requirements, such as helmets, gloves, goggles, safety shoes, etc.<br>Qualifications and Experience: Bachelor’s in electrical engineering or Diploma. With minimum 5 years relevant experience<br>Job Specific Skills:Knowledge of maintenance best practices. Knowledge of maintenance equipment, tools, and materials. Basic IT skills. English language proficiency. Leadership and problem-solving skills. Communication, time management, and interpersonal skills. Critical thinking skills. Team-building skills. Analytical skills. Innovation and creativity.

Primary Purpose:Preparing and blending raw materials according to precise formulations and quality standards. This role involves ensuring that ingredients are accurately measured, mixed, and blended to produce high-quality products in a timely and efficient manner. The ideal candidate will have strong technical skills, attention to detail, and a commitment to maintaining safety and quality standards throughout the mixing process.<br>Key Accountabilities: Prepare and measure raw materials according to product specifications and formulas. Operate mixing equipment to blend ingredients accurately and efficiently. Monitor and control the mixing process, ensuring consistency and quality of the final product. Perform quality checks to ensure that the mixture meets required specifications, making adjustments as necessary. Record and document all material usage, batch numbers, and other required information for traceability and quality control. Maintain a clean and safe work environment, following safety guidelines and company protocols. Troubleshoot and resolve issues related to mixing equipment or ingredients, reporting any malfunctions to supervisors. Assist in inventory management by monitoring raw material stock levels and communicating needs for reordering. Assist in the development and implementation of process improvements, cost reduction initiatives, and waste management strategies. Performs any work requested by the direct manager.<br>Education: High school diploma or equivalent; additional training or certification in a related field is a plus.<br>Experience:Proven experience as a Mixing Technician or in a similar role in a manufacturing or production environment. Skills:Strong verbal and written communication in both Arabic and English. Strong problem-solving skills and the ability to troubleshoot mixing issues effectively. Good communication skills and the ability to work collaboratively in a team environment. Excellent attention to detail and ability to follow detailed instructions and specifications. Knowledge of safety protocols and procedures in a manufacturing setting. Ability to stand for extended periods, lift moderate weights, and work in a physically demanding environment. Experience in factories

About the job Position: Onsite Fire Fighting Equipment and Fire Alarm Technician Location: Saudi Arabia - Jubail & Yanbu <br>Position Summary We are looking for skilled and experienced professionals specializing in the inspection, testing, and maintenance of firefighting equipment’s, fire alarm and gas detection systems. The ideal candidate will ensure that all inspections are completed efficiently and in compliance with industry standards and client specifications, playing a crucial role in safeguarding lives and property<br>Key Responsibilities Inspection and Testing:Conduct regular inspections of all onsite firefighting equipment’s to ensure functionality and compliance with regulatory standards. Test fire alarm systems, including smoke detectors, fire alarms, and control panels, to verify operational readiness. Record findings from inspections and tests accurately, suggesting improvements and necessary repairs. Maintenance - Preventive and Corrective:Perform preventive maintenance (PM) on firefighting equipment, including lubrication, cleaning, and part replacements as per manufacturer and regulatory standard guidelines. Identify and troubleshoot defects or malfunctions in fire alarm systems, performing corrective maintenance (CM) to restore systems to operational condition. Install and commission firefighting equipment’s, fire alarm systems, gas detection systems, and related components as per assigned project requirements. Ensure all work adheres to NFPA standards, manufacturer guidelines, and local fire safety regulations. Follow safety protocols and use appropriate tools and equipment during all tasks. Submit reports on inspected system performance and any corrective measures undertaken Coordinate with site Supervisor, engineers, foremen, and project teams to meet deadlines and ensure smooth workflow. Communicate effectively with clients regarding system operations and maintenance requirements.<br>Qualifications and Skills Diploma or certification in Electrical, Electronics, or a related technical field. Proven experience in fire alarm and gas detection system installation and maintenance. Strong understanding of NFPA standards and safety protocols. Ability to read and interpret technical schematics and manuals. Excellent troubleshooting and problem-solving skills. Excellent communication skills, both verbal and written.