3d Printing Jobs in Saudi

Company Description Hemamco Construction Company is a dynamic enterprise based in the commercial center of Al Khobar, Saudi Arabia, with offices in the prestigious Ababtain Tower. From this strategic location, the company has direct access to major business networks and infrastructure projects across the Eastern Province. Hemamco delivers high-quality construction services across large-scale commercial developments and complex residential projects. The company emphasizes sustainability, innovation, and technical excellence in all projects. Hemamco is committed to shaping the skylines of Saudi Arabia while contributing to long-term growth in the construction industry.<br>Role Description The Civil Engineer will work on-site in Dammam in a full-time capacity, supporting the planning, design, and execution of construction and infrastructure projects. Daily responsibilities include preparing and reviewing engineering designs and drawings, coordinating with multidisciplinary teams, and ensuring compliance with local codes, standards, and safety regulations. The role involves overseeing site activities, monitoring project progress, and resolving technical issues that arise during construction. The Civil Engineer will also participate in stormwater management planning, cost estimation, and reporting, while maintaining clear communication with project managers, contractors, and clients to ensure project quality, timelines, and budgets are met.<br>Qualifications<br> Strong skills in Civil Engineering Design and Civil Engineering fundamentals, with the ability to apply engineering principles to practical project challenges. Experience in Planning and project coordination, including scheduling, resource allocation, and progress tracking for construction and infrastructure projects. Knowledge of Stormwater Management practices, including drainage design, flood mitigation measures, and compliance with environmental regulations. Professional experience as Civil Engineers on-site, including supervision of construction activities and quality control of civil works. Bachelor’s degree or higher in Civil Engineering or a closely related discipline. Proficiency in engineering design and drafting software (e.g., Auto CAD, Civil 3D or similar) and familiarity with relevant local and international standards. Strong analytical and problem-solving abilities, with attention to detail and a focus on safety and quality. Effective communication skills and the ability to collaborate with multidisciplinary teams and stakeholders. Previous experience in Saudi Arabia or the Gulf region and knowledge of local regulatory requirements is an advantage.

JOB PURPOSETechnical Services Engineer produces specifications, designs, develops, technical configuration and technical assessment for new or modifiedcomponents or systems and manages and controls enterprise asset. Also, drives continuous improvement and develops the most appropriatemodels and engineering methods.<br>DUTIES & RESPONSIBILITIES1. Participates in analysis, development and evaluation of basic designs, engineering calculations, implementation plan and documentssupporting Khazeen work.2. Works on preparing studies and finding engineering solutions to increase efficiency and reduce operational cost.3. Approaches new technology specially in LPG industry.4. Works to develop the reliability of the equipment and monitors & controls the preventive maintenance plan on all the company's assets.5. Evaluates new systems and equipment based on approved requirements and standards.6. Reviews drawings and technical specifications of equipment and its materials.7. Contributes to the preparation of studies, designs, technical specifications, and estimated cost of engineering work.8. Evaluates and initiates technical testing of Khazeen new products.9. Develops 3D engineering designs and graphics using design software.10. Makes recommendations on adjusting and upgrading equipment according to business needs.11. Develops calibration procedures to comply with global standards for reliability and equipment availability.12. Provides technical support on new and existing equipment to the end user.13. Adheres to all safety and performance regulations.14. Performs other related duties or tasks assigned by line manager.<br>QUALIFICATIONS, EXPERIENCE & SKILLSQualifications · Bachelor’s degree in engineering Years of Experience · +3 years of experience. Competencies Core Competencies · Customer Focus · Interpersonal Sensitivity & Teamwork · Accountability & Professionalism · Commitment to Health & Safety · Learning & Innovation Competencies Core Competencies · Customer Focus · Interpersonal Sensitivity & Teamwork · Accountability & Professionalism · Commitment to Health & Safety · Learning & Innovation

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Role</h3> <p style="margin:0 0 12px; ************;">SEGULA Technologies is seeking experienced <strong style="font-weight:700;">Automotive IVI &amp; Connected Vehicle Systems Specialists</strong> to support a major next-generation electric vehicle development program. This full-time, remote position involves collaborating closely with customer engineering teams on advanced infotainment, connectivity, software architecture, and diagnostics topics. The role is suited for engineers with 5-10 years of experience in automotive embedded systems, infotainment platforms, and connected vehicle technologies.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Technical Focus Areas</h3> <p style="margin:0 0 12px; ************;">We are seeking specialists with strong experience in one or more of the following technical areas:</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;"><strong style="font-weight:700;">Augmented Virtuality Navigation:</strong> Design, development, and integration of advanced navigation solutions using augmented reality and virtualized visualization technologies.</li> <li style="margin:0 0 6px;"><strong style="font-weight:700;">Audio, Voice Assistant &amp; ECNR / Noise Cancellation:</strong> Development and integration of automotive audio and voice assistant systems, optimizing in-cabin voice capture and acoustic performance.</li> <li style="margin:0 0 6px;"><strong style="font-weight:700;">Variant Coding:</strong> Design and implementation of automotive variant coding and configuration management solutions across multiple vehicle variants.</li> <li style="margin:0 0 6px;"><strong style="font-weight:700;">OTA / SOVD Logging, Diagnostics &amp; Debugging:</strong> Support for Over-the-Air (OTA) software update architectures and Service-Oriented Vehicle Diagnostics (SOVD) concepts.</li> <li style="margin:0 0 6px;"><strong style="font-weight:700;">Functional Safety &amp; Safety-Related Technical Discussions:</strong> Participation in system and software safety-related engineering discussions, with experience in ISO 26262 highly desirable.</li> <li style="margin:0 0 6px;"><strong style="font-weight:700;">3D / HMI Deployment &amp; Resource Management:</strong> Deployment and integration of advanced 3D graphics and HMI applications, optimizing performance and resource utilization.</li> <li style="margin:0 0 6px;"><strong style="font-weight:700;">QNX / Hypervisor System-Level Design:</strong> Design and support of system-level architectures based on QNX and hypervisor technologies, defining partitioning strategies for multi-OS platforms.</li> <li style="margin:0 0 6px;"><strong style="font-weight:700;">Resource Allocation &amp; Optimization:</strong> Analysis and optimization of CPU, GPU, memory, storage, bandwidth, and system resources across embedded platforms.</li> <li style="margin:0 0 6px;"><strong style="font-weight:700;">IPC Design:</strong> Defining and implementing Inter-Process Communication (IPC) mechanisms for distributed and multi-domain automotive platforms, with experience in technologies like SOME/IP, DDS, or gRPC.</li> <li style="margin:0 0 6px;"><strong style="font-weight:700;">CP / AP Communication Design:</strong> Designing communication mechanisms between Classic Platform (CP) and Adaptive Platform (AP) environments, with AUTOSAR Classic and Adaptive experience.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <p style="margin:0 0 12px; ************;">Specialists will undertake responsibilities including:</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Collaborating closely with customer engineering teams on advanced infotainment, connectivity, software architecture, and HMI topics.</li> <li style="margin:0 0 6px;">Supporting system architecture, performance optimization, integration, and validation activities.</li> <li style="margin:0 0 6px;">Analyzing and resolving variant coding, configuration, and system-level integration issues.</li> <li style="margin:0 0 6px;">Developing and analyzing logging, tracing, monitoring, and debugging mechanisms.</li> <li style="margin:0 0 6px;">Participating in safety analysis, requirements definition, architecture reviews, and technical risk assessments.</li> <li style="margin:0 0 6px;">Troubleshooting complex system-level performance and integration constraints across distributed automotive software platforms.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Required Qualifications</h3> <p style="margin:0 0 12px; ************;">Candidates for this role should meet the following qualifications:</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Bachelor’s or Master’s degree in Computer Science, Software Engineering, Electrical Engineering, Electronics Engineering, Automotive Engineering, or a related technical field.</li> <li style="margin:0 0 6px;">Strong professional experience (5-10 years) in automotive embedded software, infotainment, connected vehicle systems, digital cockpit, or vehicle software architecture.</li> <li style="margin:0 0 6px;">Hands-on experience in one or more of the technical areas listed above.</li> <li style="margin:0 0 6px;">Strong understanding of embedded operating systems and automotive computing platforms.</li> <li style="margin:0 0 6px;">Experience with system integration, troubleshooting, debugging, and root cause analysis.</li> <li style="margin:0 0 6px;">Ability to work effectively within distributed and international engineering teams.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Model and Project Context</h3> <p style="margin:0 0 12px; ************;">This is a <strong style="font-weight:700;">full-time project assignment</strong> for a next-generation automotive / electric vehicle development program. The role operates on an <strong style="font-weight:700;">off-site / remote</strong> model, allowing candidates to work from their respective countries. The project requires an urgent start.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Application Details</h3> <p style="margin:0 0 12px; ************;">SEGULA Technologies is seeking professionals fluent in English for this role, supporting projects in Saudi Arabia. Salary for this position will be disclosed during the application process.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>The Civil Site Engineer will be responsible for planning, designing, and overseeing construction and infrastructure development for National Guard housing projects. This role requires in-depth knowledge of civil engineering practices, site development, and military housing standards. The engineer will ensure that all phases of site work—from earthworks to utility installations—are completed in accordance with engineering drawings, safety protocols, and project timelines.</span></p><br> <p><strong><span>Responsibilities:</span></strong></p><br> <ul> <li><span>Review and interpret project drawings, specifications, and design documents.</span></li> <li><span>Supervise and inspect civil works on-site, including grading, drainage, utility installations (water, sewer, electricity), and road works.</span></li> <li><span>Ensure all construction activities are carried out in compliance with local codes, regulations, and military standards.</span></li> <li><span>Coordinate with structural, MEP, and architectural teams to ensure integrated site execution.</span></li> <li><span>Develop detailed work schedules and allocate resources effectively.</span></li> <li><span>Monitor daily site operations and report progress to the Project Manager.</span></li> <li><span>Enforce safety regulations and participate in safety audits.</span></li> <li><span>Conduct quality checks to ensure construction meets project specifications and standards.</span></li> <li><span>Maintain accurate site records, including daily reports, labor logs, material usage, and inspection reports.</span></li> <li><span>Participate in project meetings and provide technical support during reviews or site inspections.</span></li> </ul> <p><strong><span>Requirements:</span></strong></p><br> <ul> <li><span>Bachelor’s Degree in Civil Engineering.</span></li> <li><span>6 years in civil/site engineering, preferably with experience in military, government, or institutional housing projects.</span></li> <li><span>Strong knowledge of civil engineering software AutoCAD, Civil 3D, MS Project.</span></li> <li><span>Excellent communication and coordination skills.</span></li> </ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Building the Future - One Project at a Time!</p><br><p>At El Seif, we embrace and embody our core values of excellence, integrity, and innovation in every aspect of our work from meticulous planning to expert construction, we consistently uphold the highest standards of excellence, ensuring that our projects are delivered with precision and attention to detail. With half a century of diverse experiences across a wide range of industries, ranging from public infrastructure to military and defense applications, we have honed our expertise and gained indispensable insights that enable us to tackle complex challenges and maintain our standard of delivering exceptional results. Our forward-thinking approach sets us apart as a trusted partner in the construction industry. By continuously pushing the boundaries of innovation, we strive to pioneer the future of construction, creating sustainable and impactful solutions that leave a lasting legacy.</p><br><p>Excellence, Integrity and, Innovation - every step of the way.</p><br><br>Responsibilities:<br><p>Structural BIM Modeller is responsible for creating, developing, and maintaining accurate structural 3D models including steel, concrete, and hybrid systems within a Building Information Modelling (BIM) environment. The role involves coordinating with multidisciplinary teams, producing detailed shop drawings, ensuring models align with project standards, and supporting the design-to-construction workflow.</p><br><ul><li>Develop detailed 3D structural models including beams, slabs, and columns using Revit or other BIM software, in line with project LOD requirements (LOD 350, 400 &amp; 500).</li><li>Prepare coordinated shop drawings, sections, and schedules from the BIM model.</li><li>Ensure compliance with LOD, BIM Execution Plans (BEP), company standards, and project-specific requirements.</li><li>Coordinate with other disciplines (Civil, architectural, and MEP) to detect and resolve clashes and ensure accuracy &amp; quality.&nbsp;</li><li>Setting up families and libraries for structural systems.</li><li>Update models to reflect design changes, RFIs, and site modifications.</li><li>Export models/drawings for submission in required formats (DWG, IFC, PDFs).</li><li>Support project engineers and managers by providing accurate quantity take-offs and data from models.</li><li>Generate structural plans, sections, elevations, and detailed shop drawings from models.&nbsp;</li><li>Maintain proper documentation and version control of BIM files.</li><li>Conduct model quality check and audits to ensure compliance with established standards.&nbsp;</li></ul><br>Qualifications:<br><ul><li>Diploma/Degree in structural engineering or related field.</li><li>Proficiency in Revit, Navisworks, AutoCAD and other BIM tools.&nbsp;</li><li>Strong knowledge of structural systems: steel, concrete, and precast.&nbsp;</li><li>Understanding common data environments (e.g., ACC/BIM 360).</li><li>Familiarity with international structural standards and sizes.&nbsp;</li><li>Ability to interpret engineering drawings, specifications and generate full structural drawing package.&nbsp;</li><li>Good problem-solving skills and attention to detail.</li><li>Effective communication and teamwork in a multidisciplinary environment.</li></ul><p>Additional Info:</p><br><p>This is a Full-time job offering standard benefits such as paid annual leave, public holidays, living allowances, healthcare coverage, and end of service benefits. We also offer discretionary benefits such as a performance bonus and merit increase along with training and development opportunities if eligible.</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for a Mechanical Design Engineer with strong experience in SolidWorks and industrial manufacturing.</p><p>Main Responsibilities</p><ul><li>Create 3D models, assemblies, and detailed manufacturing drawings using SolidWorks.</li><li>Design industrial machines, mechanical parts, and sheet metal components.</li><li>Prepare Bills of Materials (BOM) and technical documentation.</li><li>Review dimensions, tolerances, materials, and manufacturing requirements.</li><li>Modify existing designs and improve machine performance.</li><li>Coordinate with production, CNC, laser-cutting, and fabrication teams.</li><li>Follow up on the manufacturing and assembly of designed components.</li><li>Resolve technical and design issues during production.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Requirements</p><ul><li>Bachelor’s degree in Mechanical Engineering.</li><li>2–5 years of relevant experience.</li><li>Strong proficiency in SolidWorks, including assemblies and sheet metal design.</li><li>Good knowledge of AutoCAD.</li><li>Experience in industrial machinery, metal fabrication, or manufacturing.</li><li>Ability to read and prepare technical drawings.</li><li>Good knowledge of materials, welding, machining, and production processes.</li><li>Good communication and problem-solving skills.</li><li>Good command of English.</li></ul><p><br></p></div>

<strong>About The Job<br><br></strong>We are seeking an experienced <strong>Architect </strong>to join our team in Riyadh. This role is perfect for a professional with strong design skills, technical expertise, and a passion for delivering innovative architectural solutions.<br><br><strong>Key Responsibilities<br><br></strong><ul><li>Lead and manage architectural design projects from concept to completion.</li><li>Lead and manage proposals for design contracts</li><li>Develop detailed drawings, plans, and 3D models using advanced design software.</li><li>Ensure compliance with local and international building codes and standards.</li><li>Collaborate with engineers, contractors, and stakeholders to achieve project objectives.</li><li>Mentor junior architects and provide technical guidance.<br><br><br></li></ul><strong>About You<br><br></strong><strong>Requirements:<br><br></strong><ul><li>Bachelor’s degree in architecture (master’s degree preferred).</li><li>4–5 years of relevant experience in architectural design and project execution.</li><li>Saudi national.</li><li>Fluent in Arabic and English.</li><li>Strong proficiency in AutoCAD, Revit, and other architectural tools.</li><li>Excellent communication, leadership, and problem-solving skills.<br><br><br></li></ul><strong>Additional Requirements:<br><br></strong><ul><li>International exposure or experience working on global projects.</li><li>Knowledge of sustainable design principles and advanced building technologies.<br></li></ul>

This position is listed on behalf of a partner company, who manages all applications and next steps. Our partner is looking for a Visual Designer Graduate based in Saudi Arabia.<br><br>This role offers an exciting opportunity for an early-career designer to develop creative skills while contributing to impactful visual experiences in a global technology environment. You will work across branding, marketing, and digital product initiatives, creating engaging assets that connect with audiences worldwide. Collaborating with experienced designers and cross-functional teams, you will gain hands-on experience with modern design tools and creative workflows. The position combines creativity, experimentation, and continuous learning in a fully remote setting. You will help shape visual storytelling while building a strong foundation for a career in design. This is an ideal opportunity for a curious and motivated graduate passionate about visual design, emerging technologies, and creative innovation.<br><br>Accountabilities<br><br>Create visual assets for marketing and brand initiatives, including social media content, campaign materials, advertisements, and promotional designs. Develop motion graphics and animations for digital channels, product demonstrations, and engaging customer experiences. Produce creative visuals using existing asset libraries while exploring new approaches, including AI-generated imagery and 3D-inspired content. Collaborate with marketing, product, and design teams to understand briefs and deliver high-quality creative solutions. Maintain brand consistency across all design outputs while contributing ideas to evolve the visual identity. Iterate on designs based on feedback while balancing quality, creativity, and delivery timelines. Partner with experienced designers to learn best practices and contribute to the development of a strong visual language. Support multiple creative projects simultaneously while managing priorities in a fast-paced remote environment.<br><br>Requirements<br><br>Strong portfolio demonstrating visual design skills through academic projects, personal work, freelance projects, or professional experience. Proficiency in Figma for digital design, layouts, and collaborative design workflows. Hands-on experience with motion design tools such as Rive, Lottie, Principle, After Effects, or similar platforms. Experience using AI image generation tools such as Midjourney or comparable creative technologies. Interest in 3D design tools such as Blender, Spline, or similar applications is considered an asset. Strong attention to detail and ability to produce polished, high-quality visual work. Ability to manage multiple projects, adapt to feedback, and work effectively with different stakeholders. Self-motivated mindset with the ability to work independently in a fully remote environment.0-1 year of professional experience is preferred, with internships, freelance projects, or academic experience considered valuable. Familiarity with Adobe Creative Suite tools such as Illustrator, Photoshop, or Premiere is a plus. Basic understanding of design systems and component-based design is an advantage. Interest in fintech, digital finance, or emerging technologies is considered a plus.<br><br>Benefits<br><br>Fully remote work opportunity with the ability to work from anywhere.12-month graduate program designed to accelerate professional development and career growth. Opportunity to transition into a full-time position after successful completion of the program. Exposure to global teams and innovative projects within the technology and financial services space. Flexible work environment supporting autonomy and work-life balance. Paid time off flexibility to support personal well-being and recharge. Annual learning and development budget to support skill growth through courses, books, conferences, and other resources. Opportunity to collaborate with experienced professionals and develop expertise in modern design practices. Global impact through work on products serving users around the world. Remote-first culture focused on creativity, collaboration, and continuous improvement.<br><br>How Jobgether Works<br><br>We use an AI-powered matching process to ensure your application is reviewed quickly, objectively, and fairly against the role's core requirements. Our system identifies the top-fitting candidates, and this shortlist is then shared directly with the hiring company. The final decision and next steps (interviews, assessments) are managed by their internal team.<br><br>We appreciate your interest and wish you the best!<br><br> Why Apply Through Jobgether?<br><br>Data Privacy Notice: By submitting your application, you acknowledge that Jobgether will process your personal data to evaluate your candidacy and share relevant information with the hiring employer. This processing is based on legitimate interest and pre-contractual measures under applicable data protection laws (including GDPR). You may exercise your rights (access, rectification, erasure, objection) at any time.<br><br>We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Role Summary: The Assistant Interior Designer will support the senior design team in developing creative and practical interior design solutions.<br> This role is ideal for a fresh graduate who is passionate about design, eager to learn, and capable of contributing to project delivery through research, drafting, and coordination.<br> The candidate will assist in preparing design concepts, drawings, and material selections while ensuring compliance with client specifications and project requirements.<br> Key Responsibilities: Assist in the development of interior design concepts, presentations, and mood boards Support the preparation of drawings, layouts, and 3D visualizations Conduct research on materials, finishes, furniture, and design trends Coordinate with project teams, consultants, and suppliers Assist in site visits to monitor progress and ensure design compliance Prepare documentation, reports, and design specifications Ensure all design work aligns with project standards, timelines, and budget requirements Provide administrative and technical support to senior designers Requirements: Diploma degree in Interior Design or a related field Fresh graduate or up to 1 year of experience Basic knowledge of design software (AutoCAD, SketchUp, Revit, Adobe Creative Suite, etc.<br>) Strong creativity and attention to detail Good communication and teamwork skills Ability to manage multiple tasks and meet deadlines Willingness to learn and grow in a professional environment</span> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>The Survey Engineer will perform accurate land, construction, and indoor surveying activities to support project planning, design, execution, and measurement. The role requires practical expertise in operating surveying instruments, establishing site levels and coordinates, and preparing reliable survey data and drawings.</span></p><br> <p><strong><span>Key Responsibilities:</span></strong></p><br> <ul> <li><span>Conduct topographic, construction, site-leveling, setting-out, and indoor surveys.</span></li> <li><span>Establish and verify survey control points, benchmarks, coordinates, elevations, and reference lines.</span></li> <li><span>Perform setting-out activities for buildings, infrastructure, utilities, and other construction works.</span></li> <li><span>Operate surveying instruments, particularly Total Stations, GPS/GNSS equipment, and Levels.</span></li> <li><span>Record field measurements accurately and maintain complete survey records and field notes.</span></li> <li><span>Process survey data and prepare drawings, layouts, contour maps, and survey reports.</span></li> <li><span>Use AutoCAD Civil 3D or equivalent surveying and drafting software.</span></li> <li><span>Verify dimensions, alignments, levels, and coordinates against approved drawings and specifications.</span></li> <li><span>Support quantity estimation and measurement activities using collected survey data.</span></li> <li><span>Identify discrepancies between actual site conditions and approved design documents.</span></li> <li><span>Coordinate with engineers, construction teams, consultants, and other project stakeholders.</span></li> <li><span>Ensure surveying instruments are properly maintained, calibrated, and stored.</span></li> <li><span>Follow project quality, health, safety, and environmental requirements.</span></li> <li><span>Participate in company-provided technical training and professional development activities.</span></li> <li><span>Perform other surveying-related duties as required by the project.</span></li> </ul> <p><strong><span>Minimum Requirements:</span></strong></p><br> <ul> <li><span>Bachelor’s degree in Geomatics Engineering, Surveying Engineering, or Land Surveying with 3+ years of experience.</span></li> <li><span>Degrees in Geology, Geography, or GIS alone will not be accepted.</span></li> <li><span>Three to five years of relevant surveying experience.</span></li> <li><span>Valid Saudi driving licence.</span></li> <li><span>Willingness to travel to and work at different project and site locations as required</span></li> </ul> <br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

<h3 >About Esnad Contracting</h3> <p >Esnad Contracting is seeking a <strong >Civil Technical Office Engineer – Wet Utilities</strong> to join its team. This full-time position is based in <strong >Jeddah, Makkah, Saudi Arabia</strong>, focusing on critical infrastructure projects within the region.</p> <h3 >Role Summary</h3> <p >The Civil Technical Office Engineer will play a key role in the technical office, responsible for the preparation, review, and coordination of detailed engineering drawings and documentation for wet utility networks. This position requires a strong technical background and the ability to ensure design accuracy and coordination across project phases.</p> <h3 >Key Responsibilities</h3> <ul > <li >Prepare and review detailed shop drawings for gravity networks, including sewerage and stormwater systems.</li> <li >Prepare and review shop drawings for pressurized networks, including water supply, firefighting, and irrigation systems.</li> <li >Develop detailed drawings for manholes, chambers, thrust blocks, puddle flanges, and connection details.</li> <li >Produce fully coordinated fabrication and shop drawings from design packages prior to client submission and site execution.</li> <li >Prepare Purchase Requisitions (PRs) and Material Submittals for pipes, fittings, valves, and other network components.</li> <li >Coordinate with vendors to obtain shop and fabrication drawings for specialized items.</li> <li >Prepare accurate Material Take-Offs (MTO) and verify Bills of Quantities (BOQs) based on approved drawings.</li> <li >Respond to Requests for Information (RFIs) and provide technical support to the site team regarding levels, slopes, alignment, and design clashes.</li> <li >Coordinate technically with clients, consultants, vendors, and site teams to ensure project alignment.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Bachelor’s degree in Civil Engineering.</li> <li >Minimum <strong >7 years</strong> of relevant experience in wet utilities, infrastructure, or technical office works.</li> <li >Strong knowledge of gravity and pressurized utility networks.</li> <li >Demonstrated experience with sewerage, stormwater, water supply, firefighting, and irrigation networks.</li> <li >Strong knowledge of pipe materials, fittings, valves, and related utility components.</li> </ul> <h3 >Technical Skills</h3> <ul > <li >Proficiency in AutoCAD and Civil 3D.</li> <li >Strong experience in shop drawing production, Material Take-Offs (MTO), material submittals, and technical coordination processes.</li> </ul> <h3 >Work Environment</h3> <p >This is a <strong >full-time</strong> position located in <strong >Jeddah, Makkah, Saudi Arabia</strong>. The salary for this role is not disclosed and will be discussed during the interview process.</p>

المسمى الوظيفي: رسام / مصمم طرق (Roads Draftsman / CAD Designer)القطاع: الهندسة المدنية والإنشائية / البنية التحتيةالهدف الوظيفي: إعداد ومراجعة المخططات التنفيذية والتفصيلية لمشاريع الطرق الرئيسية والفرعية، وحساب المناسيب والميول وكميات الحفر والردم بدقة وفق المعايير والاشتراطات الهندسية.المهام والمسؤوليات الرئيسية:إعداد المخططات التنفيذية (Shop Drawings) ومخططات ما بعد التنفيذ (As-Built) لشبكات الطرق الرئيسية والسريعة.رسم وحساب المقاطع الطولية (Profiles) والمقاطع العرضية (Cross Sections) وتحديد مناسيب خطوط السير وميول التصريف الجانبية والسطحية.تطبيق معايير الميول الطولية والعرضية (Superelevation) والتدرجات المناسبة لضمان تصريف مياه الأمطار وسلامة الحركة المرورية.استخراج جداول الكميات لحساب أعمال القطع والردم (Cut & Fill) ومواد طبقات الرصف والأسفلت.تنسيق ومطابقة مسارات الطرق مع شبكات البنية التحتية الأخرى (تصريف السيول، الصرف الصحي، الكهرباء، المياه).تجهيز ملفات الإخراج والطباعة بمقاييس رسم معتمدة وتصدير البيانات المساحية لفرق التنفيذ الميدانية.المؤهلات والمتطلبات:المؤهل العلمي: دبلوم فني (رسم هندسي / مساحة / طرق) أو بكالوريوس هندسة مدنية.الخبرة العملية: خبرة عملية لا تقل عن سنتين إلى 4 سنوات في رسم وتصميم الطرق والبنية التحتية.البرامج والمهارات التقنية:احتراف تام لبرنامج Auto CAD (أساسي).إتقان قوي أو معرفة ممتازة ببرنامج Auto CAD Civil 3D (خاصة في تصميم الميول والمناسيب وحساب الكميات).فهم قراءة الرفع المساحي والتعامل مع النقاط والمناسيب (Point Clouds / Survey Data).

Job Overview We are hiring a Cards Technical Implementation Lead on behalf of a leading financial services client in Saudi Arabia. This is an exciting opportunity to lead the end-to-end technical implementation of next-generation card programs, including consumer credit cards, wallet-linked prepaid cards, and commercial card solutions. The successful candidate will work closely with product, technology, compliance, payment processors, and card schemes to deliver a greenfield card issuing program from inception through production launch. This role requires deep expertise in card issuing, processor integration, scheme certification, digital wallets, and payments technology within the banking or fintech industry.<br>Key Responsibilities Lead the end-to-end technical implementation and production launch of consumer credit, prepaid/wallet, and commercial card programs. Drive BIN setup, ICA assignment, and principal membership enablement with major card schemes. Coordinate processor integrations and card management system implementations. Manage Mastercard scheme certification, testing, and production readiness activities. Oversee card personalization, production, fulfillment, and digital issuance processes. Lead digital wallet integrations including Apple Pay, Google Pay, tokenization (MDES), and 3D Secure implementation. Manage authorization, authentication, dispute management, and operational readiness for production. Coordinate with processors, personalization bureaus, payment schemes, technology teams, compliance, and business stakeholders. Drive project governance, milestone tracking, risk management, and stakeholder reporting.<br>Requirements Bachelor's degree in Computer Science, Engineering, Information Systems, or a related discipline10+ years of experience in card issuing, payments technology, and technical implementation Proven experience delivering end-to-end card implementation projects for consumer and commercial card products Strong experience with BIN setup and management ICA assignment Principal membership enablement Processor integration Mastercard scheme certification Strong understanding of card lifecycle, authorization, clearing, settlement, and dispute management Experience with card management platforms such as Power CARD, Way4, Vision PLUS, Cortex, Prime, or similar Knowledge of ISO 8583/ISO 20022 messaging standards Experience implementing digital wallets (Apple Pay, Google Pay), tokenization (MDES), and 3D Secure Understanding of PCI-DSS requirements and payment security standards Knowledge of API integrations and certification environments Familiarity with the Saudi Arabian (SAMA) regulatory framework for card issuance Experience using JIRA, Confluence, MS Project, or similar project management tools Excellent communication and stakeholder management skills Fluent in English. Arabic is an advantage.------------------------------------------------------------------------------------------------------------Job location – Riyadh, KSAOutsourced though Innovations Global Type – 12 months project(may extend) Package – SAR 25000/month

<p>Roles and Responsibilities Prepare detailed shop drawings for Curtain Wall, Facades, Windows &amp; Doors. Prepare fabrication and installation drawings based on project requirements. Review architectural drawings, specifications, and project details. Coordinate drawings with engineering, production, and site teams. Revise drawings according to consultant/client comments. Design and develop cutting tools for various materials such as aluminum, steel, glass, etc. Manage production processes to ensure timely completion of projects within budget constraints. Collaborate with fabricators to resolve design-related issues and optimize fabrication techniques. Conduct quality control checks on finished products to ensure compliance with project specifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma/Bachelors degree in Civil, Architectural, or related field. 5:7 years of experience in facade/aluminium drafting. Proficiency in AutoCAD; knowledge of Revit/3D software is an advantage. Good understanding of aluminium systems, facade details, and fabrication processes. Immediate Joining is must</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Your responsibilities will encompass a wide range of engineering disciplines, from transportation and drainage to structural and geotechnical aspects. You will be expected to provide expert guidance and reviews throughout the design and development stages, ensuring that projects meet the highest standards and regulations.</p><br><p>Project duration: 5 months</p><br><br>Responsibilities:<br><ul><li> Conduct technical reviews of highway, roadway, and interchange designs, ensuring compliance with Saudi Highway Code (SHC), MOT standards, and international best practices.</li><li> Coordinate and evaluate multidisciplinary engineering submissions, including transportation, drainage, structural, and traffic engineering packages.</li><li> Review design reports, drawings, calculations, and technical studies, providing constructive feedback and recommendations.</li><li> Engage with design consultants, contractors, and stakeholders to ensure effective collaboration and alignment with project goals.</li><li> Support constructability reviews and assess designs for construction feasibility, identifying potential challenges and proposing solutions.</li><li> Review drainage systems, hydraulic studies, and stormwater management solutions, ensuring sustainable and effective water management.</li><li> Evaluate road structures, such as bridges, retaining walls, and underpasses, for safety and structural integrity.</li><li> Participate in technical workshops, design reviews, and risk assessments, contributing to the overall project strategy.</li><li> Assist with permitting processes, authority coordination, and stakeholder engagement, ensuring smooth project progression.</li><li> Monitor consultant performance and maintain high standards of design output, adhering to project schedules and quality expectations.</li></ul><br>Qualifications:<br><ul><li> Bachelor's Degree in Civil Engineering is mandatory, with a preference for a Master's Degree in Transportation Engineering.</li><li> A minimum of 10 years of relevant experience in transportation and highway engineering, with a strong track record in major infrastructure projects.</li><li> Proficiency in Highway Design, Traffic Engineering, Drainage &amp; Hydrology, Structural Engineering, Geotechnical Engineering, and Road Safety Engineering is essential.</li><li> Experience in reviewing multidisciplinary engineering designs, with a solid understanding of utility coordination and interfaces.</li><li> Proficiency in engineering software such as Civil 3D, OpenRoads, AutoCAD, MicroStation, HEC-RAS, and HEC-HMS is required.</li><li> Familiarity with PMC, client, or design consultancy environments, demonstrating an ability to work effectively in diverse teams.</li><li> Excellent communication and interpersonal skills, with the ability to collaborate and build relationships with stakeholders.</li><li> Strong analytical and problem-solving abilities, with a proactive approach to identifying and resolving technical challenges.</li><li> A commitment to continuous learning and staying updated with industry advancements and best practices.</li><li> A valid Saudi driving license and the ability to travel within the region as required by project needs.</li></ul> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Job Summary Mobco Group is seeking a qualified and experienced Landscape Architect to join our team in Riyadh. The ideal candidate will have 7–10 years of experience in landscape architecture, with a strong background in the design, planning, coordination, and execution of landscape works for large-scale construction projects. The successful candidate will be responsible for developing innovative landscape designs while ensuring compliance with project specifications, client requirements, and applicable standards. Key Responsibilities Prepare and develop landscape concepts, detailed designs, and construction drawings. Coordinate landscape design activities with architectural, civil, structural, and MEP teams. Review and approve landscape shop drawings, material submittals, and method statements. Ensure all landscape works comply with project specifications, local regulations, and quality standards. Conduct site inspections to monitor construction progress and ensure compliance with approved designs. Coordinate with consultants, contractors, suppliers, and project stakeholders throughout the project lifecycle. Prepare planting plans, irrigation layouts, hardscape details, and landscape specifications. Resolve technical issues related to landscape design and site execution. Support value engineering initiatives and recommend cost-effective landscape solutions. Prepare progress reports and participate in project coordination meetings. Ensure timely completion of landscape works while maintaining the highest quality standards. Qualifications Bachelor's Degree in Landscape Architecture (Mandatory). Professional registration or relevant certifications are an advantage. Mandatory Requirements Minimum 7–10 years of experience as a Landscape Architect. Proven experience in landscape design and execution for construction projects. Strong knowledge of landscape materials, irrigation systems, planting design, and hardscape works. Experience reviewing construction drawings and coordinating with multidisciplinary teams. Proficiency in Auto CAD, Civil 3D, Revit, Sketch Up, Lumion, Adobe Creative Suite, or similar design software. Strong communication and coordination skills. Must be able to join immediately or within a short notice period.

Job Title : Architecture Landscape Draftsman Department : Engineering- Design Report's To : Engineering Manager Location : Qiddiya, Riyadh, Saudi Arabia Availability : Immediately ( Required Only )<br>Job Summary The Architecture/Landscape Draftsman is responsible for preparing accurate architectural and landscape design/shop drawings, construction documents, and technical details using CAD and BIM software. The role supports architects and landscape architects throughout the design and construction process by producing high-quality drawings that comply with project requirements, applicable codes, and company standards.<br>Key Responsibilities Prepare architectural and landscape drawings, plans, sections, elevations, and construction details using Auto CAD, Revit, and drafting software. Develop detailed hardscape, softscape, grading, irrigation, planting, and site layout drawings. Revise and update drawings based on design changes, consultant comments, and client feedback. Coordinate drawings with architectural, structural, MEP, civil, and landscape disciplines to ensure consistency and accuracy. Prepare presentation drawings, layout plans, and technical documentation for design submissions. Assist in preparing permit, tender, and construction documentation. Maintain drawing registers and ensure proper document control procedures are followed. Conduct quantity take-offs and assist in preparing material schedules when required. Support site teams by preparing as-built drawings and incorporating site modifications into project documentation. Organize and maintain project files, CAD standards, and drawing templates.<br>Qualifications Diploma or bachelor’s degree in architecture, Drafting Technology, Landscape Architecture, Minimum of 7 years of drafting experience in architectural and/or landscape projects. Experience in infrastructure , roads ,landscape.<br>Required Skills Proficiency in Auto CAD (essential). Working knowledge of Revit, Sketch Up, Civil 3D, or BIM software is an advantage. Familiarity with Adobe Photoshop, Illustrator, or Lumion is beneficial. Strong understanding of architectural and landscape construction drawings. Knowledge of grading, irrigation, planting plans, and hardscape detailing. Excellent attention to detail and drafting accuracy. Ability to interpret sketches, specifications, and design concepts. Strong communication and teamwork skills. Good time management and ability to work on multiple projects simultaneously.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Building the Future - One Project at a Time!</p><br><p>At El Seif, we embrace and embody our core values of excellence, integrity, and innovation in every aspect of our work from meticulous planning to expert construction, we consistently uphold the highest standards of excellence, ensuring that our projects are delivered with precision and attention to detail. With half a century of diverse experiences across a wide range of industries, ranging from public infrastructure to military and defense applications, we have honed our expertise and gained indispensable insights that enable us to tackle complex challenges and maintain our standard of delivering exceptional results. Our forward-thinking approach sets us apart as a trusted partner in the construction industry. By continuously pushing the boundaries of innovation, we strive to pioneer the future of construction, creating sustainable and impactful solutions that leave a lasting legacy.</p><br><p>Excellence, Integrity and, Innovation - every step of the way.</p><br><br>Responsibilities:<br><p>Architectural BIM Modeler is responsible for creating, developing, and maintaining accurate architectural 3D models including walls, finishes, openings, floors, ceilings, furniture, landscape, and façade within a Building Information Modelling (BIM) environment. The role involves coordinating with multidisciplinary teams, producing detailed shop drawings, ensuring models align with project standards, and supporting the design-to-construction workflow.</p><br><ul><li>Develop detailed 3D architectural models for exterior and interior of buildings, and landscape using Revit or other BIM software, in line with project LOD requirements (LOD 350, 400 &amp; 500).</li><li>Prepare coordinated shop drawings, sections, and schedules from the BIM model.</li><li>Ensure compliance with LOD, BIM Execution Plans (BEP), company standards, and project-specific requirements.</li><li>Coordinate with other disciplines (Civil, structural, and MEP) to detect and resolve clashes and ensure accuracy &amp; quality.&nbsp;</li><li>Setting up families and libraries for architectural systems.</li><li>Update models to reflect design changes, RFIs, and site modifications.</li><li>Export models/drawings for submission in required formats (DWG, IFC, PDFs).</li><li>Support project engineers and managers by providing accurate quantity take-offs and data from models.</li><li>Participate in BIM coordination meetings and contribute to resolving multidisciplinary issues.</li><li>Maintain proper documentation and version control of BIM files.</li><li>Support visualization and walkthrough using rendering visualization tool. (a plus)</li><li>Conduct model quality check and audits to ensure compliance with established standards.&nbsp;</li></ul><br>Qualifications:<br><ul><li>Diploma/Degree in Architecture or related field.</li><li>Proficiency in Revit, Navisworks, AutoCAD and other BIM tools.&nbsp;</li><li>Experience in rendering program (Lumion, twin motion, etc.)</li><li>Strong knowledge of architectural detailing's, finishes, partitions, ceilings, doors, windows, landscape, and façade models.&nbsp;</li><li>Understanding common data environments (e.g., ACC/BIM 360).</li><li>Familiarity with international architectural standards and sizes.&nbsp;</li><li>Ability to interpret engineering drawings, specifications.</li><li>Good problem-solving skills and attention to detail.</li><li>Effective communication and teamwork in a multidisciplinary environment.</li></ul><p>Additional Info:</p><br><p>This is a Full-time job offering standard benefits such as paid annual leave, public holidays, living allowances, healthcare coverage, and end of service benefits. We also offer discretionary benefits such as a performance bonus and merit increase along with training and development opportunities if eligible.</p><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Jasara Program Management Company (Jasara PMC) is a leading Joint Venture between Public Investment Fund (PIF), Jacobs, and Saudi Aramco, established to deliver world-class program management services across the Kingdom of Saudi Arabia. Jasara plays a key role in supporting the realization of Saudi Vision 2030, particularly in delivering giga-projects and large-scale infrastructure developments.<br><br>We are seeking a Sr. Discipline Engineer (Infrastructure) to join Jasara Program Management Company (Jasara PMC).<br><br>This is a full-time role based in Saudi Arabia.<br><br>The project involves large-scale residential community development comprising villas, small buildings infrastructure networks, utilities, roads, parks, and commercial facilities.<br><br>The role reports directly to the Project Director and involves close collaboration with both internal and external stakeholders.<br><br>Requirements<br><br>Bachelor's degree in civil engineering, infrastructure engineering, or a closely related engineering field7+ years of infrastructure engineering experience, including work on large-scale residential communities, infrastructure networks and utilities, roads and public realm, or mixed-use/commercial developments Strong experience across utilities, roads, stormwater and drainage, landscape infrastructure, and sitewide infrastructure coordination within infrastructure projects Experience with PMC-style project delivery on large masterplanned developments Proven ability to coordinate with a Project Director, consultants and contractors, and manage external stakeholders across large infrastructure packages Currently based in Saudi Arabia and eligible for local transfer Experience with Auto CAD, Civil 3D, BIM/Revit, or other infrastructure design and coordination tools commonly used on large community developments is a plus

<p><br></p> <p> <strong>Role Overview</strong> </p> <p>Saudi Gold Refinery (SGR) is seeking a Civil Draftsman in Riyadh, Saudi Arabia to produce precise technical drawings for our refinery infrastructure and expansion projects. This role supports the technical team by converting engineering concepts into compliant construction documents for civil and structural works. The position requires a detail-oriented professional who understands industrial safety standards and the specific needs of precious metals processing facilities.</p> <p>The Civil Draftsman will report directly to the VP of Technical &amp; Operation and will play a key role in maintaining the integrity of our plant's physical documentation. You will ensure that all civil designs meet regulatory requirements and operational needs while supporting ongoing maintenance and capital projects.</p> <p> <strong>Key Responsibilities</strong> </p> <p>The Civil Draftsman will be responsible for the following key areas of work.</p> <p> <strong>Drafting and Design Support</strong> </p> <p>The role produces detailed 2D and 3D civil drawings for foundations, structures, and site works using AutoCAD and Revit.</p> <p> <strong>Compliance Assurance</strong> </p> <p>This position ensures all drawings adhere to the Saudi Building Code, SASO standards, and internal SGR engineering guidelines.</p> <p> <strong>As-Built Updates</strong> </p> <p>The Draftsman updates master drawing sets to reflect field changes and maintains an accurate archive of as-built documentation.</p> <p> <strong>Technical Coordination</strong> </p> <p>The role collaborates with mechanical and electrical engineers to resolve spatial conflicts and integrate utility requirements into civil designs.</p> <p> <strong>Quantity Take-Offs</strong> </p> <p>This position provides accurate material quantities and dimensional data to support procurement and cost estimation activities.</p> <p> <strong>Site Verification</strong> </p> <p>The Draftsman conducts site visits to verify existing conditions and ensure constructed elements match approved design specifications.</p> <p> <strong>Document Control</strong> </p> <p>The role manages the version control and distribution of all civil drawings in accordance with ISO 9001 quality standards.</p> <p> <strong>Contractor Liaison</strong> </p> <p>This position provides technical clarifications to construction contractors to minimize errors and rework during implementation.</p> <p><br></p><ul> </ul> <p> <strong>Success Metrics</strong> </p> <ul> <li> Delivers 100 percent of assigned drawings within agreed timelines and quality standards.</li> <li> Maintains zero major design-related rework incidents during construction phases.</li> <li> Completes the update of all legacy civil drawings for the existing plant within the first year.</li> <li> Achieves full compliance with document control protocols for all issued technical documents.</li> <li> Reduces drafting turnaround time by implementing standardized detail libraries.</li> <li> Receives positive feedback from project engineers and contractors on drawing clarity.</li> <li> Supports successful regulatory inspections by providing accurate and up-to-date as-built records.</li> </ul> <p> <strong>Equal Opportunity Statement:</strong> </p> <p>Saudi Gold Refinery welcomes applications from all qualified candidates. Hiring decisions are made based on role requirements, skills, experience, and alignment with Saudization and Vision 2030 priorities.</p><p><strong>Desired Candidate Profile</strong></p><div><span style="font-size: 11px;">Holds a Diploma or Bachelor's degree in Civil Engineering, Architectural Technology, or a related field.</span></div><div><span style="font-size: 11px;">Possesses at least five years of drafting experience in an industrial, mining, or heavy construction setting.</span></div><div><span style="font-size: 11px;">Demonstrates advanced proficiency in AutoCAD and working knowledge of Revit or Civil 3D.</span></div><div><span style="font-size: 11px;">Understands Saudi Building Code requirements and standard practices for reinforced concrete detailing.</span></div><div><span style="font-size: 11px;">Has experience producing drawings for industrial facilities, including chemical containment and heavy foundations.</span></div><div><span style="font-size: 11px;">Shows ability to interpret engineering sketches and technical specifications accurately.</span></div><div><span style="font-size: 11px;">Communicates clearly in English with engineers, contractors, and internal stakeholders.</span></div><div><span style="font-size: 11px;">Maintains a valid driving license and ability to perform regular site inspections.</span></div><div><span style="font-size: 11px;"><b><br></b></span></div><div><span style="font-size: 11px;"><b>Preferred / Nice-to-have</b></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Experience in precious metals refining, chemical processing, or high-security facility projects.</span></div><div><span style="font-size: 11px;">Proficiency in BIM workflows and clash detection tools.</span></div><div><span style="font-size: 11px;">Knowledge of SASO standards for industrial safety and environmental protection.</span></div><div><span style="font-size: 11px;">Familiarity with document control systems such as Aconex or SharePoint.</span></div><div><span style="font-size: 11px;">Membership in the Saudi Council of Engineers (SCE).</span></div>