وظائف فني تعبئة و تغليف - ينبع السعودية

<h3 >About the Role</h3> <p >SEVEN is seeking a highly skilled and experienced <strong >Senior Technician - Maintenance</strong> to join our team on a full-time basis. This critical role involves performing a variety of advanced-level planned maintenance, repair activities, and troubleshooting for attraction rides and devices across our projects in Riyadh, Tabuk, Abha, Yanbu, and Medina. The Senior Technician will lead work execution alongside other attraction technicians, actively supporting onsite installations, collaborating with contractors and manufacturers to ensure SEVEN’s maintenance requirements and operational readiness are met.</p> <h3 >Key Responsibilities</h3> <ul > <li >Lead and execute technical activities for rides and attractions, supported by the technician team and technical management.</li> <li >Perform advanced planned maintenance, repair, and troubleshooting for attraction rides and devices of all typologies.</li> <li >Actively participate with Operations, Project Attraction Teams, and Project Management Consultants.</li> <li >Maintain close communication with ride manufacturers' representatives engaged at SEVEN project sites.</li> <li >Act as Team Leader when required during absences, verifying the quality and accuracy of technicians' work, particularly on safety-critical inspections and repairs.</li> </ul> <h3 >Maintenance Operations and Compliance</h3> <ul > <li >Execute and record corrective maintenance activities on rides and attractions in accordance with industry standards and manufacturer requirements.</li> <li >Execute and record planned preventive maintenance activities according to approved schedules.</li> <li >Respond to ride and attraction breakdowns, diagnose faults, and restore operations safely and efficiently.</li> <li >Lead and execute major annual maintenance and rehabilitation activities to ensure optimal ride performance.</li> <li >Support daily ride operational readiness and achievement of reliability and availability targets.</li> <li >Work in accordance with international safety best practices and KSA regulatory requirements, adhering to all QHSE policies, procedures, and company standards.</li> </ul> <h3 >Technical Support and Development</h3> <ul > <li >Contribute to the continuous improvement of technical documentation, including SOPs, technical manuals, troubleshooting guides, and PM checklists.</li> <li >Support the implementation and effective use of asset management systems and related documentation.</li> <li >Monitor spare parts and consumable stock requirements, providing proactive feedback to support availability.</li> <li >Conduct inspections of tools and equipment, ensuring compliance with calibration and safety requirements.</li> <li >Deliver training and maintain training records in line with Learning &amp; Development requirements.</li> <li >Identify opportunities to improve ride performance, maintenance efficiency, and operational effectiveness.</li> </ul> <h3 >Qualifications and Experience</h3> <ul > <li >An Engineering Certificate or Diploma in a relevant technical field (Electrical, Mechanical, or Electromechanical).</li> <li >A minimum of <strong >5 years of experience</strong> in the leisure, attractions, or theme park industry, with a preference for candidates possessing 5-10 years of experience.</li> <li >Demonstrated hands-on experience in major ride and attraction maintenance activities, including annual rehabilitation (REHAB).</li> </ul> <h3 >Work Environment and Company Values</h3> <p >The Senior Technician will contribute to achieving departmental objectives and KPIs aligned with SEVEN’s strategic goals. This role requires effective communication with Operations teams to resolve technical issues and a commitment to promoting guest experience excellence while maintaining the highest safety standards. You will be expected to support SEVEN’s vision, mission, and values, and adhere to the SEVEN Code of Conduct, upholding the highest standards of integrity.</p>

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث <strong >شركة المردوف للمقاولات</strong> عن <strong >مهندس مواد</strong> للانضمام إلى فريقها في <strong >ينبع، المدينة المنورة</strong>. سيعمل شاغل هذه الوظيفة بدوام كامل، ويكون مسؤولاً عن دراسة وتصميم المواد المستخدمة في مختلف الصناعات، بالإضافة إلى تقديم الدعم الفني والمشورة المتخصصة لضمان جودة وكفاءة المشاريع.</p> <h3 >الهدف من الوظيفة</h3> <p >يهدف هذا الدور إلى تعزيز جودة وكفاءة العمليات والمنتجات من خلال الخبرة المتخصصة في علم المواد. سيساهم المهندس في الجوانب التقنية للمشاريع الهندسية، مع التركيز على الأداء والجودة والتكلفة الاقتصادية، وضمان الامتثال لمعايير الجودة العالمية المعتمدة.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >دراسة وتصميم المواد لمختلف التطبيقات الصناعية وتقديم الاستشارات التقنية المتعلقة بها.</li> <li >المساهمة الفعالة في عملية التصميم الشاملة وتقديم المشورة بشأن أداء المواد وجودتها وتكلفتها الاقتصادية للعمليات والمنتجات.</li> <li >توفير الدعم الفني للمشاريع الهندسية والمشاركة في العمليات المتعلقة بالتصنيع والتقنية والمشتريات.</li> <li >تطوير وتحسين أساليب وإجراءات العمل ومواكبة أحدث التطورات التقنية في مجال المواد.</li> <li >إعداد الوثائق والتقارير المتخصصة بالأعمال والمشروعات الهندسية، وتوثيق نسب تقدمها وعرضها وحفظها في قاعدة البيانات المعتمدة وفقاً للسياسات والإجراءات.</li> <li >المسؤولية عن مراقبة وتنفيذ جميع أمور الجودة والاختبار، ورفع التقارير الدورية وفقاً لمتطلبات نظام الأيزو <strong >ISO 9001</strong>.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <p >لشغل هذا الدور، يتطلب المرشح خبرة عملية تتراوح بين <strong >سنتين إلى خمس سنوات</strong> في مجال هندسة المواد أو مجال ذي صلة. يجب أن يمتلك المرشح فهماً عميقاً لخصائص المواد وتطبيقاتها الصناعية، بالإضافة إلى القدرة على تحليل البيانات الفنية وإعداد التقارير المتخصصة.</p> <h3 >بيئة العمل</h3> <p >تتيح هذه الوظيفة فرصة للعمل ضمن بيئة ديناميكية في قطاع المقاولات، حيث يتم التركيز على الابتكار والجودة. يتطلب الدور التواجد بدوام كامل في مواقع المشاريع بـ <strong >ينبع، المدينة المنورة</strong>، والتعاون مع فرق عمل متعددة التخصصات لضمان تحقيق أهداف المشاريع.</p> <h3 >تقديم الطلبات</h3> <p >ندعو المهتمين والذين يستوفون المتطلبات المذكورة لتقديم طلباتهم. يرجى ملاحظة أن تفاصيل الراتب سيتم مناقشتها خلال المقابلة الشخصية.</p></div>

<h3 >About Tronox and the Role</h3> <p >Tronox is a global leader in the vertically integrated manufacturing of titanium dioxide (TiO2) pigment and other materials that add brightness and durability to products encountered daily. With 5,700 employees across six continents, the company operates unified by strong values and a vision to shape a sustainable, thriving world through enriched and refined minerals. We are seeking a <strong >Learning &amp; Development Specialist</strong> to join our team in Yanbu, Al Madinah, Saudi Arabia, on a full-time basis.</p> <h3 >Role Purpose</h3> <p >The Learning &amp; Development Specialist is responsible for developing, implementing, and continuously improving the competency assurance system specifically for Maintenance personnel. This is achieved through structured classroom learning, practical workshops, simulation, coaching, and structured On-the-Job Training (OJT). The role supports safe, reliable, environmentally responsible, and efficient plant operations by identifying competency gaps, conducting Training Needs Analysis (TNA), developing competency-based learning programs, facilitating technical training, and conducting competency assessments. The position partners closely with Maintenance, Operations, Engineering, Reliability, Process Safety, HSE, HR, and Subject Matter Experts (SMEs) to ensure employees possess the required technical competencies to perform their work safely, effectively, and in compliance with Tronox standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Deliver classroom, practical workshop, field coaching, and structured OJT programs.</li> <li >Conduct Training Needs Analysis (TNA) with department leaders and identify competency gaps using various data sources such as competency matrices, performance data, incident learnings, audits, and business requirements.</li> <li >Develop and continuously improve competency-based training curricula, including CETP, JRTP, OJT, qualification pathways, and technical development programs.</li> <li >Design structured learning pathways for new hires, experienced employees, multi-skilled personnel, and succession planning initiatives.</li> <li >Develop technical training manuals, presentations, SOP learning guides, assessment packages, and reference materials.</li> <li >Convert operational procedures, maintenance work instructions, OEM manuals, and engineering standards into effective learning materials.</li> <li >Collaborate with SMEs in developing technical learning content and blended learning solutions, including instructor-led, digital, self-paced, and workplace learning resources.</li> </ul> <h3 >Competency Assessment and Learning Administration</h3> <ul > <li >Conduct theoretical and practical competency assessments, developing written examinations, practical assessment checklists, and question banks.</li> <li >Verify employee competence against defined competency standards before qualification or authorization, and support periodic competency reassessment and reauthorization programs.</li> <li >Maintain employee learning records, competency matrices, qualification status, and training history.</li> <li >Prepare monthly competency reports and updates, ensuring compliance with LMS requirements and document control standards.</li> <li >Coordinate annual plans and monthly training calendars with stakeholders.</li> </ul> <h3 >Continuous Improvement and Safety Compliance</h3> <ul > <li >Evaluate training effectiveness using learner feedback, assessment results, workplace observations, and operational performance, recommending improvements to competency programs.</li> <li >Participate in capability improvement initiatives.</li> <li >Ensure all learning programs comply with Tronox Safety Standards, Process Safety Management (PSM), environmental requirements, and company procedures.</li> <li >Promote Human Performance principles, Learning from Events, and Safe Work Practices.</li> <li >Support competency requirements associated with Permit to Work, Isolation, Critical Risk Management, and Life Saving Rules.</li> </ul> <h3 >Required Experience</h3> <p >Candidates for this full-time position should possess <strong >5-10 years of relevant experience</strong> in learning and development, particularly within an industrial or manufacturing context, with a focus on technical competency assurance.</p>

<h3 >About KBR Saudi Arabia</h3> <p >KBR Saudi Arabia is seeking a highly skilled <strong >Sr. Rotating Equipment Engineer</strong> specializing in Design &amp; Construction to join their team in Yanbu. This full-time position offers an opportunity to contribute to significant projects within a leading global company known for its engineering and technology solutions.</p> <h3 >The Role of Sr. Rotating Equipment Engineer</h3> <p >Under general supervision, the Sr. Rotating Equipment Engineer independently applies advanced engineering techniques to address complex challenges. This role involves making critical decisions on engineering problems and methods, ensuring optimal project outcomes. The engineer will also represent the organization in key forums, engaging with external engineers and officials to resolve important questions and negotiate effectively.</p> <h3 >Key Responsibilities</h3> <ul > <li >Independently apply advanced engineering techniques and methodologies.</li> <li >Make informed decisions regarding engineering problems and proposed methods.</li> <li >Represent the organization in conferences to resolve significant technical questions.</li> <li >Engage in negotiations with key engineers and officials from other organizations.</li> <li >Manage measurable assets, including assigned staff and project budgets.</li> <li >Provide technical guidance and mentorship to designers and less experienced engineers.</li> <li >Serve as a trusted consultant, with associates and others relying heavily on scientific interpretations and advice.</li> </ul> <h3 >Required Experience and Expertise</h3> <p >Candidates for this role should possess <strong >5 to 10 years of relevant experience</strong> in rotating equipment engineering, particularly within design and construction contexts. A proven ability to apply advanced engineering principles and make independent technical decisions is essential. The role requires strong communication and negotiation skills for external representation, alongside the capacity to provide effective technical guidance internally.</p> <h3 >Work Environment and Commitment</h3> <p >This is a <strong >full-time position</strong> based in <strong >Yanbu</strong>, Saudi Arabia. The successful candidate will operate in an environment where scientific interpretations and advice are highly valued, contributing to critical projects and providing leadership through technical expertise.</p> <h3 >Application Process</h3> <p >Interested candidates who meet the specified requirements are encouraged to apply. Salary for this position will be discussed during the interview process.</p>

<h3 >About the Role</h3> <p >sraco is seeking an <strong >Associate Instrument Engineer</strong> to join its team in Yanbu, Saudi Arabia. This is a full-time position designed for individuals with foundational knowledge in instrumentation and control systems, offering an opportunity to contribute to critical engineering functions.</p> <h3 >Role Overview</h3> <p >The Associate Instrument Engineer will be responsible for supporting the calibration, maintenance, and integration of various instrumentation and control systems. This role involves applying engineering principles to ensure the accurate measurement, control, and optimal performance of industrial processes, while adhering to established safety and industry standards.</p> <h3 >Key Responsibilities</h3> <ul > <li >Calibrate and maintain instruments to ensure optimal performance and accuracy.</li> <li >Analyze data to verify accurate measurements and effective system control.</li> <li >Troubleshoot and resolve issues related to instrumentation and control systems.</li> <li >Collaborate with other engineering teams for the seamless integration of control systems.</li> <li >Provide technical support and training to staff regarding instrumentation systems.</li> <li >Ensure compliance with all relevant safety and industry standards in instrumentation activities.</li> <li >Develop and implement software solutions for instrumentation control applications.</li> <li >Conduct performance tests and prepare comprehensive technical reports documenting findings.</li> <li >Oversee the installation and commissioning processes for new instrumentation equipment.</li> </ul> <h3 >Qualifications and Experience</h3> <p >Candidates for this role should possess <strong >0-1 years of relevant experience</strong>. This position is suitable for fresh graduates with a <strong >high GPA from top universities</strong>, demonstrating a strong academic foundation in engineering or a related field.</p> <h3 >Work Environment</h3> <p >This full-time position is based in <strong >Yanbu, Saudi Arabia</strong>. The successful candidate will work within a professional and collaborative engineering environment focused on precision, operational excellence, and adherence to industry best practices.</p> <h3 >Application Information</h3> <p >Interested candidates who meet the specified qualifications are encouraged to apply for this Associate Instrument Engineer position.</p>