وظائف رسام كهربائي - تبوك السعودية

About the Role We are seeking a skilled Low Current / ELV Technician to perform installation, testing, preventive maintenance, troubleshooting, and corrective maintenance activities for Extra-Low Voltage (ELV) and low-current systems within building facilities and Operations & Maintenance environments. The role requires practical hands-on experience with building ELV systems, including CCTV, Access Control, Fire Alarm, Structured Cabling, Intercom, Public Address (PA/BGM), SMATV/IPTV, and related low-current infrastructure. The technician will be responsible for ensuring ELV systems remain operational, reliable, and compliant with site requirements and safety procedures.<br>Key Responsibilities Install, maintain, troubleshoot, and repair low-current / ELV systems within buildings and facilities. Perform installation and maintenance of CCTV cameras, recording systems, monitors, and related equipment. Install, test, and troubleshoot Access Control systems, including card readers, controllers, magnetic locks, exit buttons, and associated devices. Perform basic installation, testing, and maintenance of Fire Alarm system devices, including detectors, manual call points, sounders, modules, and field wiring. Install and maintain structured cabling systems, including data/voice cables, patch panels, cabinets, outlets, and cable management. Perform installation and maintenance of Public Address (PA), Background Music (BGM), Intercom, SMATV/IPTV, and similar ELV systems. Trace and troubleshoot cable faults, connectivity issues, device failures, and system alarms. Terminate and test cables using appropriate tools and testing equipment. Read and interpret basic ELV drawings, layouts, schematics, cable schedules, and wiring diagrams. Conduct preventive maintenance inspections and identify potential system failures before they affect operations. Perform corrective maintenance and replace defective devices, components, cables, and accessories as required. Verify system functionality after installation, repair, or maintenance activities. Maintain proper labeling, routing, termination, and organization of ELV cables and equipment. Coordinate with supervisors, engineers, and other maintenance teams when troubleshooting system-related issues. Record completed maintenance activities, identified faults, spare parts used, and required follow-up actions. Follow site safety procedures, permit requirements, PPE requirements, and manufacturer recommendations. Maintain tools, testing equipment, and work areas in safe and good working condition. Respond to assigned maintenance requests and emergency faults within the required response time. Perform other ELV-related technical duties as assigned by the supervisor.<br>Required Technical Skills Practical hands-on experience with ELV / Low Current systems. Knowledge of one or more of the following systems:CCTVAccess Control Fire Alarm Structured Cabling / Data Networks Public Address / BGMIntercom SMATV / IPTVGate Barrier / Parking Systems Other building ELV systems Ability to identify and troubleshoot basic electrical and ELV faults. Ability to perform cable pulling, termination, labeling, testing, and fault tracing. Ability to use basic ELV testing equipment and hand tools. Ability to read basic ELV drawings, schematics, and wiring diagrams. Basic understanding of IP addressing, network connectivity, and Ethernet cabling is an advantage. Knowledge of preventive and corrective maintenance practices. Good understanding of technical safety procedures and PPE requirements.<br>Qualifications & Experience Technical diploma, certificate, or recognized vocational qualification in Electrical, Electronics, Telecommunications, ELV, Low Current Systems, or a related technical discipline. Relevant experience in building facilities, Operations & Maintenance, Facility Management, construction, or ELV projects. Candidates should meet one of the following experience/qualification combinations:Minimum 2 years of relevant experience with a three-year technical diploma. Minimum 4 years of relevant experience with a two-year technical certificate. Minimum 6 years of relevant experience with a one-year apprenticeship or vocational certificate. Experience working on commercial buildings, residential compounds, hospitals, hotels, malls, airports, or large facilities is an advantage. Basic English communication skills. Ability to follow technical instructions and work effectively under supervision. Willingness to complete a technical / ELV trade test.<br>Personal Competencies Strong troubleshooting and fault-finding ability. Practical, hands-on approach to technical work. Good attention to detail. Ability to work independently and as part of a technical team. Good communication and coordination skills. Ability to prioritize maintenance requests and respond to urgent faults. Commitment to safety, quality, and site procedures. Punctual, disciplined, and reliable.<br>Work Environment The position is based within building facilities and Operations & Maintenance environments and may require working in plant rooms, electrical/ELV rooms, ceilings, risers, equipment rooms, and other technical areas. The technician may be required to work shifts, respond to emergency maintenance requests, and perform tasks in accordance with site operational requirements. Trade Test Shortlisted candidates may be required to complete a practical ELV technical assessment covering areas such as:CCTV troubleshooting Access Control troubleshooting Fire Alarm basic troubleshooting Cable termination and testing Fault tracing Reading basic ELV drawings Use of ELV tools and testing equipment Basic IP/network connectivity<br>Equal Opportunity Statement We are committed to maintaining an inclusive and professional workplace and providing equal opportunities to qualified candidates.

About the Role We are seeking a skilled Low Current / ELV Technician to perform installation, testing, preventive maintenance, troubleshooting, and corrective maintenance activities for Extra-Low Voltage (ELV) and low-current systems within building facilities and Operations & Maintenance environments. The role requires practical hands-on experience with building ELV systems, including CCTV, Access Control, Fire Alarm, Structured Cabling, Intercom, Public Address (PA/BGM), SMATV/IPTV, and related low-current infrastructure. The technician will be responsible for ensuring ELV systems remain operational, reliable, and compliant with site requirements and safety procedures.<br>Key Responsibilities Install, maintain, troubleshoot, and repair low-current / ELV systems within buildings and facilities. Perform installation and maintenance of CCTV cameras, recording systems, monitors, and related equipment. Install, test, and troubleshoot Access Control systems, including card readers, controllers, magnetic locks, exit buttons, and associated devices. Perform basic installation, testing, and maintenance of Fire Alarm system devices, including detectors, manual call points, sounders, modules, and field wiring. Install and maintain structured cabling systems, including data/voice cables, patch panels, cabinets, outlets, and cable management. Perform installation and maintenance of Public Address (PA), Background Music (BGM), Intercom, SMATV/IPTV, and similar ELV systems. Trace and troubleshoot cable faults, connectivity issues, device failures, and system alarms. Terminate and test cables using appropriate tools and testing equipment. Read and interpret basic ELV drawings, layouts, schematics, cable schedules, and wiring diagrams. Conduct preventive maintenance inspections and identify potential system failures before they affect operations. Perform corrective maintenance and replace defective devices, components, cables, and accessories as required. Verify system functionality after installation, repair, or maintenance activities. Maintain proper labeling, routing, termination, and organization of ELV cables and equipment. Coordinate with supervisors, engineers, and other maintenance teams when troubleshooting system-related issues. Record completed maintenance activities, identified faults, spare parts used, and required follow-up actions. Follow site safety procedures, permit requirements, PPE requirements, and manufacturer recommendations. Maintain tools, testing equipment, and work areas in safe and good working condition. Respond to assigned maintenance requests and emergency faults within the required response time. Perform other ELV-related technical duties as assigned by the supervisor.<br>Required Technical Skills Practical hands-on experience with ELV / Low Current systems. Knowledge of one or more of the following systems:CCTVAccess Control Fire Alarm Structured Cabling / Data Networks Public Address / BGMIntercom SMATV / IPTVGate Barrier / Parking Systems Other building ELV systems Ability to identify and troubleshoot basic electrical and ELV faults. Ability to perform cable pulling, termination, labeling, testing, and fault tracing. Ability to use basic ELV testing equipment and hand tools. Ability to read basic ELV drawings, schematics, and wiring diagrams. Basic understanding of IP addressing, network connectivity, and Ethernet cabling is an advantage. Knowledge of preventive and corrective maintenance practices. Good understanding of technical safety procedures and PPE requirements.<br>Qualifications & Experience Technical diploma, certificate, or recognized vocational qualification in Electrical, Electronics, Telecommunications, ELV, Low Current Systems, or a related technical discipline. Relevant experience in building facilities, Operations & Maintenance, Facility Management, construction, or ELV projects. Candidates should meet one of the following experience/qualification combinations:Minimum 2 years of relevant experience with a three-year technical diploma. Minimum 4 years of relevant experience with a two-year technical certificate. Minimum 6 years of relevant experience with a one-year apprenticeship or vocational certificate. Experience working on commercial buildings, residential compounds, hospitals, hotels, malls, airports, or large facilities is an advantage. Basic English communication skills. Ability to follow technical instructions and work effectively under supervision. Willingness to complete a technical / ELV trade test.<br>Personal Competencies Strong troubleshooting and fault-finding ability. Practical, hands-on approach to technical work. Good attention to detail. Ability to work independently and as part of a technical team. Good communication and coordination skills. Ability to prioritize maintenance requests and respond to urgent faults. Commitment to safety, quality, and site procedures. Punctual, disciplined, and reliable.<br>Work Environment The position is based within building facilities and Operations & Maintenance environments and may require working in plant rooms, electrical/ELV rooms, ceilings, risers, equipment rooms, and other technical areas. The technician may be required to work shifts, respond to emergency maintenance requests, and perform tasks in accordance with site operational requirements. Trade Test Shortlisted candidates may be required to complete a practical ELV technical assessment covering areas such as:CCTV troubleshooting Access Control troubleshooting Fire Alarm basic troubleshooting Cable termination and testing Fault tracing Reading basic ELV drawings Use of ELV tools and testing equipment Basic IP/network connectivity<br>Equal Opportunity Statement We are committed to maintaining an inclusive and professional workplace and providing equal opportunities to qualified candidates.

<div dir="rtl"><h3 >نبذة عن الدور</h3> <p >تبحث شركة صحارى لخدمات الصيانة عن <strong >مهندس كهربائي</strong> للانضمام إلى فريقها في تبوك. يتولى شاغل هذا الدور مسؤولية إعداد التصاميم والمخططات الكهربائية لمختلف المشاريع والأعمال الهندسية، بالإضافة إلى متابعة تنفيذها وتشخيص الأعطال وإعداد برامج الصيانة الوقائية. هذا الدور بدوام كامل يتطلب خبرة تتراوح بين 0-1 سنة ويهدف إلى ضمان كفاءة وسلامة الأنظمة والمعدات الكهربائية.</p> <h3 >المهام والمسؤوليات الرئيسية</h3> <ul > <li >إعداد التصاميم والمخططات الكهربائية لمشاريع وأعمال الهندسة الكهربائية، ومتابعة مراحل تنفيذها لضمان الجودة والالتزام بالمواصفات.</li> <li >تطوير مخططات ومواصفات خطوط شبكات النقل والتوزيع الكهربائية، وتحديد مساراتها بدقة وكفاءة.</li> <li >إعداد برامج تشغيل الأنظمة والمعدات الكهربائية بما يتوافق مع متطلبات العمل والتشغيل.</li> <li >تشخيص أعطال الأجهزة والمعدات الكهربائية، ومتابعة إجراءات الإصلاح والصيانة لضمان استمرارية العمل.</li> <li >وضع برامج الصيانة الوقائية للأجهزة والمعدات والشبكات الكهربائية بناءً على توصيات الشركات المصنعة والتعليمات الفنية.</li> <li >المساهمة في تطوير أساليب وإجراءات العمل ومواكبة أحدث التطورات التقنية في مجال الهندسة الكهربائية.</li> <li >إعداد الوثائق والتقارير الفنية المتخصصة بنتائج الدراسات والتحاليل، وعرضها وتوضيحها وحفظها في قاعدة البيانات المعتمدة.</li> </ul> <h3 >المؤهلات والخبرات المطلوبة</h3> <ul > <li >شهادة جامعية في الهندسة الكهربائية أو مجال ذي صلة.</li> <li >خبرة عملية تتراوح من <strong >0 إلى 1 سنة</strong> في مجال الهندسة الكهربائية.</li> </ul> <h3 >المهارات والكفاءات</h3> <ul > <li >القدرة على إعداد التصاميم والمخططات الكهربائية باستخدام البرامج المتخصصة.</li> <li >مهارات تحليلية قوية لتشخيص الأعطال وتحديد الحلول المناسبة.</li> <li >القدرة على إعداد التقارير الفنية والوثائق المتخصصة بشكل واضح ودقيق.</li> <li >معرفة جيدة ببرامج تشغيل الأنظمة والمعدات الكهربائية.</li> <li >الالتزام بمعايير السلامة والجودة في جميع مراحل العمل.</li> <li >مهارات التواصل الفعال والقدرة على العمل ضمن فريق.</li> </ul> <h3 >تفاصيل الوظيفة</h3> <ul > <li >نوع العمل: دوام كامل.</li> <li >الموقع: تبوك، المملكة العربية السعودية.</li> <li >الراتب: لم يتم الإفصاح عنه.</li> </ul> <h3 >التقديم</h3> <p >ندعو المهتمين ممن تنطبق عليهم الشروط المذكورة أعلاه للتقديم لهذه الفرصة المهنية في شركة صحارى لخدمات الصيانة.</p></div>

Egis is a leading global architectural, consulting, construction engineering, operations and mobility services firm. We create and operate intelligent infrastructure and buildings that both respond to the climate emergency and contribute to balanced, sustainable and resilient development. Our 20,500 employees operate across over 100 countries, deploying their expertise to develop and deliver cutting-edge innovations and solutions for clients. Through the wide range of our activities, we are central to the collective organization of society and the living environment of citizens all over the world.<br><br><br><br>Job Description<br><br>The Senior Electrical Engineer is responsible for providing oversight, coordination and construction supervision support for electrical works across AlUla infrastructure and development projects. The role ensures that electrical works are executed in accordance with approved designs, specifications, applicable Saudi regulations, authority requirements, international standards, project quality requirements, and approved construction programmes.<br><br>The position will work closely with the Resident Engineer, Project Manager, contractors, supervision consultants, designers, utility providers (SEC), authorities and other engineering disciplines to facilitate the successful delivery, testing, commissioning, and handover of electrical infrastructure.<br><br> <br><br>Key Roles & Responsibilities<br><br>Provide senior technical oversight of electrical works during the construction, testing, commissioning and handover stages. Sanity checks electrical drawings, specifications, method statements, material submissions, shop drawings, and technical proposals for compliance with project requirements. Monitor installation of electrical infrastructure including HV/MV/LV networks, substations, transformers, switchgear, distribution systems etc. Coordinate electrical works with civil, utilities, roads, architectural, mechanical, ICT and other project disciplines. Monitor site activities to ensure compliance with approved IFC drawings, specifications, approved materials, and relevant standards. Coordinate interfaces with Saudi Electricity Company (SEC) and other relevant utility providers and authorities as required. Support the Project Manager/Resident Engineer in facilitating technical and authority approvals necessary for construction. Monitor contractor progress against the approved programme and identify electrical activities that may affect project milestones or critical interfaces. Monitor testing and commissioning activities and verify that required inspections, tests and documentation are completed before handover. Review electrical snagging/punch-list items and monitor their closure. Support review of as-built drawings, O&M manuals, testing and commissioning records and final handover documentation. Maintain professional communication with the Client, contractors, consultants and relevant stakeholders. Perform other electrical engineering duties required for successful delivery of the assigned AlUla projects. <br><br><br>Qualifications<br><br>Bachelor’s degree in electrical engineering from a recognized university. Minimum 10 years of relevant professional experience, preferably involving major infrastructure, utilities, and development projects. Strong experience in electrical infrastructure including HV/MV/LV distribution, substations, transformers, street lighting, external networks and associated systems. Demonstrable experience working within PMC, PMCM, engineering consultancy or construction supervision environments. Previous experience on major infrastructure or multidisciplinary development programmes is highly desirable. Previous experience in Saudi Arabia and/or the GCC is required. Good knowledge of SEC requirements, Saudi Building Code and applicable Saudi authority requirements. Good knowledge of relevant international standards including IEC, IEEE, NFPA and BS standards, as applicable. Experience with testing, commissioning, and handover of electrical systems. Professional engineering registration or membership of a recognized engineering institution is preferred. Registration with the Saudi Council of Engineers (SCE), where applicable, is preferred.

painter

We are looking for an experienced Engineering Manager – Design (Electrical) to join our team in Saudi Arabia. Responsibilities Lead electrical design and engineering activities across projects. Design and review Primary & Secondary Electrical Systems. Design earthing/grounding, lightning protection, lighting, emergency lighting, and lighting control systems. Prepare and review SLDs, schematics, technical specifications, and detailed electrical layouts. Manage design validation, verification, technical reviews, and approval processes. Coordinate with clients, consultants, and multidisciplinary project teams. Coordinate electrical interfaces with Civil, Structural, Architectural, BIM, Mechanical, Fire Protection, Firefighting, CCTV, Protection, and Secondary Design teams. Ensure compliance with applicable codes, standards, specifications, and project requirements. Support project execution from design development through final submission. Provide technical support to proposal and estimation teams during bidding stages. Participate in design reviews, client meetings, and technical discussions. Requirements BE / BTech in Electrical Engineering.15+ years of relevant electrical design and engineering experience. Minimum 10 years of experience in GIS and AIS Substation design and engineering. Strong knowledge of Primary & Secondary Electrical Systems. Strong leadership, coordination, and team-management skills. Experience in utility and major infrastructure projects is highly preferred.

<h3>نبذة عن الوظيفة</h3><p>تبحث مجموعة الذيابي للمقاولات عن <strong>فني كهربائي تمديدات كهربائية</strong> للانضمام إلى فريقها في تبوك. يتولى شاغل هذه الوظيفة مسؤولية دراسة مخططات التمديدات الكهربائية، تقدير المواد اللازمة، متابعة التنفيذ، وتشخيص الأعطال لضمان سير العمل بكفاءة وسلامة.</p><h3>المهام والمسؤوليات الرئيسية</h3><ul><li>دراسة وتحليل مخططات التمديدات الكهربائية لمختلف أنواع المنشآت (المنزلية، الصناعية، والتجارية) ومكوناتها.</li><li>تقدير الكميات المطلوبة من المواد والأجهزة الكهربائية، وتأمين التجهيزات اللازمة لتنفيذ أعمال التمديدات، مع التأكد من مطابقتها للمواصفات الفنية.</li><li>متابعة تنفيذ أعمال التمديدات الكهربائية، والإشراف على تشغيل الدارات الكهربائية، وإجراء الفحوصات اللازمة مثل فحوص العازلية، الاستمرارية، والتأريض.</li><li>تشخيص الأعطال في التمديدات الكهربائية، وتحديد الإجراءات التصحيحية اللازمة لمعالجتها، بالإضافة إلى متابعة أعمال الصيانة الوقائية.</li><li>تطبيق جميع إجراءات وتعليمات السلامة والصحة المهنية لضمان بيئة عمل آمنة.</li></ul><h3>المؤهلات والخبرات المطلوبة</h3><ul><li>خبرة عملية تتراوح بين <strong>سنتين إلى 5 سنوات</strong> في مجال التمديدات الكهربائية.</li><li>معرفة قوية بمخططات التمديدات الكهربائية المنزلية والصناعية والتجارية.</li><li>القدرة على تشخيص الأعطال الكهربائية وتحديد حلولها.</li><li>الالتزام بتطبيق معايير السلامة والصحة المهنية.</li></ul><h3>مكان العمل ونوع الوظيفة</h3><p>هذه الوظيفة بدوام كامل ومقرها في <strong>تبوك</strong>. سيعمل الفني الكهربائي ضمن فريق مجموعة الذيابي للمقاولات، وستكون مسؤولياته محورية لضمان جودة وسلامة المشاريع الكهربائية.</p><h3>معلومات إضافية</h3><p>الراتب لهذه الوظيفة سيتم تحديده بناءً على الخبرة والمؤهلات، وسيتم الإفصاح عنه خلال عملية المقابلة.</p><h3>التقديم للوظيفة</h3><p>ندعو المهتمين الذين يستوفون المتطلبات المذكورة أعلاه إلى تقديم طلباتهم لهذه الفرصة في تبوك.</p>

<h3>About the Role</h3><p>SAMA Holding Co- SAMA Construction ** is seeking an experienced <strong>Engineering Manager – Design (Electrical)</strong> to join their team. This full-time position is based in Saudi Arabia, with locations in Duba and Tabuk. The role involves leading electrical design and engineering activities across various projects, ensuring compliance with industry standards and project requirements.</p><h3>Key Responsibilities</h3><ul><li>Lead electrical design and engineering activities for projects.</li><li>Design and review Primary &amp; Secondary Electrical Systems.</li><li>Design earthing/grounding, lightning protection, lighting, emergency lighting, and lighting control systems.</li><li>Prepare and review Single Line Diagrams (SLDs), schematics, technical specifications, and detailed electrical layouts.</li><li>Manage design validation, verification, technical reviews, and approval processes.</li><li>Coordinate with clients, consultants, and multidisciplinary project teams.</li><li>Coordinate electrical interfaces with Civil, Structural, Architectural, BIM, Mechanical, Fire Protection, Firefighting, CCTV, Protection, and Secondary Design teams.</li><li>Ensure compliance with applicable codes, standards, specifications, and project requirements.</li><li>Support project execution from design development through final submission.</li><li>Provide technical support to proposal and estimation teams during bidding stages.</li><li>Participate in design reviews, client meetings, and technical discussions.</li></ul><h3>Required Qualifications and Experience</h3><ul><li>Bachelor of Engineering (BE) or Bachelor of Technology (BTech) in Electrical Engineering.</li><li>A minimum of 15 years of relevant electrical design and engineering experience.</li><li>At least 10 years of experience in GIS and AIS Substation design and engineering.</li><li>Strong knowledge of Primary &amp; Secondary Electrical Systems.</li><li>Strong leadership, coordination, and team-management skills.</li><li>Experience in utility and major infrastructure projects is highly preferred.</li></ul><h3>Work Environment and Location</h3><p>This full-time position is based in Saudi Arabia, specifically in the cities of Duba and Tabuk. The role requires collaboration with various internal and external stakeholders within a project-driven environment.</p><h3>Application Process</h3><p>Interested candidates who meet the specified requirements are encouraged to apply for this Engineering Manager – Design (Electrical) position.</p>

<h3 >About the Buggy Host Role</h3> <p >Carra is seeking a <strong >Buggy Host</strong> for Raffles The Red Sea, a full-time position located in Umluj, Tabuk, Saudi Arabia. This role is central to ensuring a refined and comfortable experience for guests, providing essential transportation services within the luxury resort environment.</p> <h3 >Raffles The Red Sea: A Destination Overview</h3> <p >Raffles The Red Sea is part of the kingdom's Red Sea Project, offering visitors access to nature-focused resorts. With 361 rooms, 11 distinct dining concepts including an overwater restaurant, and a Spa, Raffles The Red Sea is designed as a sanctuary of refined elegance and timeless luxury. The property blends Raffles’ renowned graciousness and personalized service with the natural beauty and sustainability ethos of Red Sea Global, providing a curated haven for discerning travelers.</p> <h3 >Key Responsibilities</h3> <ul > <li >Provide seamless transportation for guests between villas, dining venues, and resort facilities, ensuring a smooth and comfortable journey.</li> <li >Anticipate guest needs and offer intuitive, personalized service, acting as a resort storyteller by sharing information about the destination, facilities, and local culture.</li> <li >Operate electric buggies in a safe and responsible manner, strictly adhering to resort speed limits, pedestrian safety protocols, and KSA driving regulations.</li> <li >Conduct daily pre-shift inspections of buggies, including battery levels, tire pressure, and cleanliness, ensuring vehicles are kept in pristine condition.</li> <li >Assist guests with the loading and unloading of luggage or personal items with professionalism and care.</li> <li >Maintain constant communication with the Front Office and Concierge teams to ensure timely guest pickups and drop-offs.</li> <li >Adhere to the resort’s sustainability ethos by managing vehicle charging efficiently and reporting any mechanical issues affecting energy consumption.</li> <li >Uphold Raffles’ grooming and conduct standards, ensuring every guest interaction reflects bespoke and heartfelt service.</li> </ul> <h3 >Required Qualifications and Experience</h3> <ul > <li >Minimum of 1–2 years of experience in a guest-facing role within a luxury hotel or resort environment.</li> <li >Demonstrated understanding of Ultra-Luxury guest expectations and brand alignment.</li> <li >Experience gained in a pre-opening phase of a luxury establishment is required.</li> </ul> <h3 >Desired Skills and Attributes</h3> <ul > <li >A proactive and anticipatory approach to service, coupled with a strong sense of ownership and accountability.</li> <li >Impeccable grooming and personal presentation, consistent with luxury service standards.</li> </ul> <h3 >Work Environment</h3> <p >This full-time position is based at Raffles The Red Sea in Umluj, Tabuk, Saudi Arabia, operating within a luxury resort setting that prioritizes guest experience and environmental sustainability.</p>

NEOM Green Hydrogen Company Limited (NGHC):NEOM Green Hydrogen Company (NGHC) is on a mission to make a carbon-free, climate-safe future a reality. We are building the world’s largest plant to produce green ammonia at scale, providing humankind with a cost-efficient solution that will accelerate the worldwide green hydrogen economy. Located in NEOM and supporting Saudi Arabia’s Vision 2030, NGHC will be integrating up to 4GW of onshore solar and wind energy to supply up to 650 tons of green ammonia per day for transportation globally. Operations will go onstream in 2026. NGHC brings together the technology, operational efficiency and know-how of ACWA Power, Air Products and NEOM in a joint-venture partnership with over 80 years of combined experience in the fields of hydrogen, energy, renewables and global networks.<br>JOB DETAILS:Division: NGHC Operations. REPORTS TO: NGHC Instrument Supervisor. LIAISE/COOPERATE WITH: Air Products, External EPCs, Suppliers, NGHC Operation Directors, Operations and Maintenance Staff.<br>POSITION SUMMARY:This position will be part of NGHC (Neom Green Hydrogen Company) Maintenance group. Will be based in Neom Region. Plan and schedule maintenance activities, coordinating with operations, maintenance, engineering, and procurement teams to ensure timely execution. Timely and accurately reporting Maintenance KPIs. Allocate sufficient resources, including labour, materials, and tools, to maximize maintenance efficiency and manpower utilization.<br>NATURE & SCOPE:The main functions of this position are:Planning and Scheduling all Instrument Maintenance Jobs Support in preparation and reporting of maintenance KPIs. Effectively reporting of schedule Compliance, KPI parameters etc. Report status of external jobs. Single point of contact for contractors for external jobs. Comply with NGHC Safety Standards. Comply with NGHC contractors’ management system. Manpower optimization and utilization. Lead daily Operation and Maintenance coordination meeting. Lead contractors Kick-Off meetings. Interface with NGHC-MM and list out priorities, provide clear visibility on Hold for material orders. Support on-call emergencies. Ensure inventory control and balance for all instrument spare parts.<br>PRINCIPAL DUTIES AND RESPONSBILITIES:Develop detailed maintenance schedules using software like SAP S/4Hana, MS Project, or other planning tools. Domain expertise in SAP PM/maintenance modules; strong command of relevant SAP transactions and configuration. Define work breakdown structures (WBS) and sequence activities efficiently. Establish and maintain baseline schedules. Identify and allocate manpower, equipment, tooling, spares and materials as per project needs. Ensure optimal utilization of instrument resources to enhance productivity. On-call support during plant emergencies, to plan any emergency maintenance activity. Track and monitor the progress of electrical works against the schedule. Generate weekly and monthly progress reports for NGHC management. Identify delays, analyze root causes, and recommend corrective actions. Ensure smooth coordination between different electrical activities and other disciplines. Identify potential project risks (delays, resource shortages, design changes) and develop mitigation strategies. Revise schedules as needed to accommodate unforeseen changes. Monitor subcontractor performance to ensure adherence to Job timelines aligned with predetermined schedule. Support in TA/SD job package preparation. Act as Point of contact for external contractors. Ability to act as SAP power user and Master Data specialist will be added advantage. To prepare report based on KPIS.<br>PEOPLE MANAGEMENT:Act as single point of contact with contractors and external service providers.<br>SKILLS / TECHNICAL KNOWLEDGE AREAS:Demonstrated safe work skills Experience: 7–10 years in Routine maintenance planning, Scheduling within petrochemical, or fertilizer and oil & gas. Ability to work collaboratively with various disciplines, Engineers, Plant managers to effectively schedule the activities. Ability to work independently and complete tasks as scheduled is required Experience of mentoring / coaching less experienced, Planners and Electrical technicians Proficiency in Primavera P6, MS Project, SAP S4Hana, and ERP systems Strong understanding of Instrument systems, control valves, analysers, Transmitters, vibration sensors, RTD, gauge, switches, flowmeters, electro-pneumatic positions for control valves, actuators, conductive limit detectors, etc. Excellent analytical, problem-solving, and time-management skills. Strong communication and teamwork abilities. Negotiation skills. Single point for contact with external contactors.<br>QUALIFICATIONS REQUIRED:B. S. in Instrument Engineering or equivalent. MINIMUM YEARS EXPERIENCE IN SIMILAR JOB ROLE:7 - 12 years of relevant experience.

<p><strong>NEOM Green Hydrogen Company Limited (NGHC)</strong></p><p>NEOM Green Hydrogen Company (NGHC) is on a mission to make a carbon-free, climate-safe future a reality. We are building the world’s largest plant to produce green ammonia at scale, providing humankind with a cost-efficient solution that will accelerate the worldwide green hydrogen economy. Located in NEOM and supporting Saudi Arabia’s Vision 2030, NGHC will be integrating up to 4GW of onshore solar and wind energy to supply up to 650 tons of green ammonia per day for transportation globally. Operations will go onstream in 2026. NGHC brings together the technology, operational efficiency and know-how of ACWA Power, Air Products and NEOM in a joint-venture partnership with over 80 years of combined experience in the fields of hydrogen, energy, renewables and global networks.</p><p><br></p><p><strong>Position Title: </strong>System Dispatcher - EPMS</p><p><strong>Division: Power </strong>Transmission Operations</p><p><strong>Reports to: </strong>EPMS Supervisor</p><p><br></p><p><strong>Position Summary:</strong></p><p>The System Dispatcher – EPMS is responsible for the real-time monitoring and operation of the transmission and distribution network through EPMS and SCADA systems to ensure safe, reliable, and stable grid performance. The role supports daily control center operations, disturbance management, and coordination with generation, field, and maintenance teams to maintain uninterrupted power supply.</p><p><br></p><p><strong>Nature of Scope:</strong></p><p>Executes switching operations, responds to system events and emergencies, and takes immediate corrective actions to maintain system operating limits and grid stability. Collaborates with internal and external stakeholders while supporting troubleshooting, reporting, and continuous improvement of control center operations in compliance with applicable standards and regulations.</p><p><br></p><p><br></p><p><strong>PRINCIPAL DUTIES AND RESPONSBILITIES:</strong></p><p><br></p><p>•Monitor and control the real-time operation of the power system to maintain reliability and stability.</p><p>•Coordinate with generation, transmission, and interconnected entities to ensure seamless integration of renewable energy resources.</p><p>•Implement corrective actions to mitigate potential system disturbances and maintain grid stability &amp; reliability.</p><p>•Coordinate emergency response efforts during system disturbances, outages, or extreme weather events.</p><p>•Implement contingency plans to restore system stability and minimize disruptions to electricity supply.</p><p>•Collaborate with internal teams, external stakeholders, and regulatory agencies to address emergency situations effectively.</p><p>•Practical experience in reviewing and validating Telecom, Supervisory control and data acquisition “SCADA”, EPMS / HCIS and SAS engineering scope engineering tasks. Including reviewing SAS and SCADA point lists.</p><p>•Ability and willingness to work in 24/7 shift schedules at the working places within the control room including stand-by duty in line with Saudi-Arabian work labor rules.</p><p>•Working knowledge of current IEC standards, including establishment of renewable energy project performance guarantees, and testing procedures, Experience working in the Middle East and knowledge of local and national standards including KSA SAF standards, HCIS requirements</p><p>and the Saudi Electrical Code would also be an advantage.</p><p>•Ensures that lessons learned for engineering are clearly identified, recorded, and communicated.</p><p>•Ensure Risk Management procedures are followed, and any issues addressed/resolved.</p><p>•Provide technical training, guidance and support to project and maintenance teams.</p><p>•Troubleshoot and resolve technical issues related to EPMS and SCADA systems.</p><p>•Stay up-to-date with emerging technologies and industry trends related to EPMS and SCADA systems.</p><p>•Bring in innovation and new ideas for the operation of a control center to operate a highly loaded transmission grid, considering the renewable energy system and smart systems of demand side response.</p><p>•Contribute according to his later role in the NGHC SCADA/EPMS operations in a secure and reliable manner e.g.</p><p>- Operate the Transmission and distribution system security in a manner that will not exceed frequency and voltage limits or cause System Operating Limits (SOL’s).</p><p>- Bottleneck management for current overloads (I) and voltage control (U) - Frequency control (f) and activation of flexibility providers</p><p>- Granting of disposition permits and test permits for grid field operation - Execution or instruction of switching operations</p><p>- Notifying of the grid field operation when irregularities or disturbances occur</p><p>- Takes or directs appropriate real-time actions, as necessary, under normal and emergency conditions, to maintain system reliability, including restoration plan.</p><p>- Maintain situational awareness of all the installations within control.</p><p>- Logs and documentation for grid operations and prepare reports as required.</p><p>- Collaborate with other engineering disciplines to ensure system integration and coordination.</p><p>- Conduct technical analyses and evaluations of substation equipment and systems.</p><p>- Develop and maintain engineering standards and procedures for EPMS and SCADA systems.</p><p>- Lead the internal and/or external problem-solving necessary to arrive at appropriate engineering decisions.</p><p>•Complete other responsibilities as requested by NGHC management e.g.</p><p>•Liaise with relevant internal and external stakeholders to stay updated and make proposals to improve the processes in NGHC as needed.</p><p>•Review and approve deliverables prepared by the EPC and OEM and assess validate scope to ensure alignment and interface between packages.</p><p>•Oversight and direction of EPC submittals for all SCADA engineering activities including safety in design, on time on budget on quality.</p><p>•Ensures effective technical scope coordination with EPC.</p><p>•Contributes to the review of Neom Green Hydrogen Company specifications and procedures and manages the review of EPC deliverables &amp; vendor drawings related to the assigned scope.</p><p>•Conduct factory acceptance testing (FAT) and site acceptance testing (SAT) of EPMS and SCADA systems.</p><p>•Write, plan, and implement approved detailed switching procedures and issue clearances on transmission and distribution lines.</p><p><br></p><p><br></p><p><strong> ESSENTIAL EDUCATION and/or QUALIFICATIONS REQUIRED:</strong></p><p>•Minimum qualification of Electrical Engineering Degree (power options preferred).</p><p>•Experience in SCADA and EMS engineering systems.</p><p>•Experience working with the Saudi Electric supply company.</p><p>•Excellent communication and interpersonal skills</p><p>•Ability to work independently and as part of a team.</p><p>•Strong problem-solving and analytical skills</p><p>•Control room experience is preferred.</p><p>•Knowledge of power system operations and equipment.</p><p>•Demonstrated analytical and problem-solving skills.</p><p>•Excellent verbal and written communication skills</p><p>•Must have an operating knowledge of personal computers including MS Windows Software including Word and Excel.</p><p>•Ability to work rotating shifts.</p>

In a world of possibilities, pursue one with endless opportunities. Imagine Next!<br><br>At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what’s possible.<br><br><strong>Job Description<br><br></strong>Parsons is looking for an amazingly talented <strong>Electrical Technician – Saudi National</strong> to join our team! In this role you will get to support the installation, inspection, testing, maintenance, and troubleshooting of electrical systems and equipment across office and field locations.<br><br><strong>What You'll Be Doing<br><br></strong><ul><li>Perform routine electrical installation, maintenance, inspection, testing, and repair activities under the supervision of senior technicians and professional staff.</li><li>Assist with the installation, operation, and maintenance of electrical systems, equipment, panels, generators, motors, pumps, lighting systems, and related components.</li><li>Conduct basic inspections and testing of electrical equipment to identify faults, defects, and unsafe conditions.</li><li>Assist with troubleshooting electrical circuits, control systems, wiring, power distribution systems, and equipment.</li><li>Read and interpret basic electrical drawings, schematics, wiring diagrams, and technical documentation.</li><li>Support the testing, calibration, repair, and modification of electrical control and instrumentation systems.</li><li>Use electrical testing tools and equipment in accordance with approved procedures and safety requirements.</li><li>Maintain accurate records, inspection reports, maintenance logs, test results, and documentation of completed activities.</li><li>Assist in preparing field and office reports related to electrical work, inspections, findings, and equipment status.</li><li>Follow all applicable safety procedures, electrical codes, permit requirements, and project-specific requirements.</li><li>Assist with preventive and corrective maintenance activities at project and field locations.</li><li>Coordinate with higher-level technicians, engineers, and other project team members to complete assigned work.</li><li>Perform routine and occasionally physical tasks in office, industrial, construction, and field environments.</li><li>Travel to and work at field locations as required.</li><li>Perform other responsibilities associated with this position as appropriate.<br><br><br></li></ul><strong>What Required Skills You'll Bring<br><br></strong><ul><li>Must be a Saudi National.</li><li>Diploma or Associate degree in Electrical Engineering, Electrical Technology, Electromechanical Engineering, or a related discipline.</li><li>Minimum of 3 years of related professional experience.</li><li>Basic knowledge of electrical installation, maintenance, inspection, testing, and troubleshooting.</li><li>Ability to read and interpret electrical drawings, schematics, wiring diagrams, and technical manuals.</li><li>Knowledge of electrical tools, testing equipment, control panels, wiring systems, motors, generators, pumps, and power distribution equipment.</li><li>Ability to follow instructions, standard operating procedures, safety requirements, and electrical work practices.</li><li>Ability to maintain accurate records, logs, reports, and technical documentation.</li><li>Ability to work effectively under the supervision of senior technicians, engineers, and professional staff.</li><li>Ability to work in office, industrial, construction, and field environments.</li><li>Willingness to travel and work at project and field locations as required.</li><li>Ability to perform routine physical and occasionally heavy labor activities.</li><li>Basic understanding of electrical health and safety requirements, including lockout/tagout procedures and safe work practices.<br><br><br></li></ul><strong>What Desired Skills You'll Bring<br><br></strong><ul><li>Experience working on large infrastructure, construction, industrial, utility, or facilities projects.</li><li>Experience with electrical systems, power distribution equipment, control panels, generators, motors, pumps, lighting systems, and instrumentation.</li><li>Experience performing preventive and corrective maintenance on electrical equipment.</li><li>Experience using multimeters, insulation resistance testers, clamp meters, electrical test equipment, and related tools.</li><li>Familiarity with low-voltage and medium-voltage electrical systems.</li><li>Familiarity with electrical control systems, instrumentation, and automation equipment.</li><li>Knowledge of applicable electrical codes, standards, and safety requirements.</li><li>Experience preparing inspection reports, maintenance records, testing documentation, and equipment logs.</li><li>Relevant electrical or safety certifications are preferred.</li></ul><li><br><br><br></li>Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information.<br><br>We truly invest and care about our employee’s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest—APPLY TODAY!<br><br>Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/.

In a world of possibilities, pursue one with endless opportunities. Imagine Next!<br><br>At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what’s possible.<br><br><strong>Job Description<br><br></strong>Parsons is looking for an amazingly talented <strong>Electrical Technician – Saudi National</strong> to join our team! In this role you will get to support the installation, inspection, testing, maintenance, and troubleshooting of electrical systems and equipment across office and field locations..<br><br><strong>What You'll Be Doing<br><br></strong><ul><li>Perform routine electrical installation, maintenance, inspection, testing, and repair activities under the supervision of senior technicians and professional staff.</li><li>Assist with the installation, operation, and maintenance of electrical systems, equipment, panels, generators, motors, pumps, lighting systems, and related components.</li><li>Conduct basic inspections and testing of electrical equipment to identify faults, defects, and unsafe conditions.</li><li>Assist with troubleshooting electrical circuits, control systems, wiring, power distribution systems, and equipment.</li><li>Read and interpret basic electrical drawings, schematics, wiring diagrams, and technical documentation.</li><li>Support the testing, calibration, repair, and modification of electrical control and instrumentation systems.</li><li>Use electrical testing tools and equipment in accordance with approved procedures and safety requirements.</li><li>Maintain accurate records, inspection reports, maintenance logs, test results, and documentation of completed activities.</li><li>Assist in preparing field and office reports related to electrical work, inspections, findings, and equipment status.</li><li>Follow all applicable safety procedures, electrical codes, permit requirements, and project-specific requirements.</li><li>Assist with preventive and corrective maintenance activities at project and field locations.</li><li>Coordinate with higher-level technicians, engineers, and other project team members to complete assigned work.</li><li>Perform routine and occasionally physical tasks in office, industrial, construction, and field environments.</li><li>Travel to and work at field locations as required.</li><li>Perform other responsibilities associated with this position as appropriate</li></ul><li><br><br><br></li><strong>What Required Skills You'll Bring<br><br></strong><ul><li>Must be a Saudi National.</li><li>Diploma or Associate degree in Electrical Engineering, Electrical Technology, Electromechanical Engineering, or a related discipline.</li><li>Minimum of 3 years of related professional experience.</li><li>Basic knowledge of electrical installation, maintenance, inspection, testing, and troubleshooting.</li><li>Ability to read and interpret electrical drawings, schematics, wiring diagrams, and technical manuals.</li><li>Knowledge of electrical tools, testing equipment, control panels, wiring systems, motors, generators, pumps, and power distribution equipment.</li><li>Ability to follow instructions, standard operating procedures, safety requirements, and electrical work practices.</li><li>Ability to maintain accurate records, logs, reports, and technical documentation.</li><li>Ability to work effectively under the supervision of senior technicians, engineers, and professional staff.</li><li>Ability to work in office, industrial, construction, and field environments.</li><li>Willingness to travel and work at project and field locations as required.</li><li>Ability to perform routine physical and occasionally heavy labor activities.</li><li>Basic understanding of electrical health and safety requirements, including lockout/tagout procedures and safe work practices.</li></ul><li><br><br><br></li><strong>What Desired Skills You'll Bring<br><br></strong><ul><li>Experience working on large infrastructure, construction, industrial, utility, or facilities projects.</li><li>Experience with electrical systems, power distribution equipment, control panels, generators, motors, pumps, lighting systems, and instrumentation.</li><li>Experience performing preventive and corrective maintenance on electrical equipment.</li><li>Experience using multimeters, insulation resistance testers, clamp meters, electrical test equipment, and related tools.</li><li>Familiarity with low-voltage and medium-voltage electrical systems.</li><li>Familiarity with electrical control systems, instrumentation, and automation equipment.</li><li>Knowledge of applicable electrical codes, standards, and safety requirements.</li><li>Experience preparing inspection reports, maintenance records, testing documentation, and equipment logs.</li><li>Relevant electrical or safety certifications are preferred.</li></ul><li><br><br><br></li>Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information.<br><br>We truly invest and care about our employee’s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest—APPLY TODAY!<br><br>Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/.

In a world of possibilities, pursue one with endless opportunities. Imagine Next!<br><br>At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what’s possible.<br><br><strong>Job Description<br><br></strong>Parsons is looking for an amazingly talented <strong>Electrical Technician – Saudi National</strong> to join our team! In this role you will get to support the installation, inspection, testing, maintenance, and troubleshooting of electrical systems and equipment across office and field locations.<br><br><strong>What You'll Be Doing<br><br></strong><ul><li>Perform routine electrical installation, maintenance, inspection, testing, and repair activities under the supervision of senior technicians and professional staff.</li><li>Assist with the installation, operation, and maintenance of electrical systems, equipment, panels, generators, motors, pumps, lighting systems, and related components.</li><li>Conduct basic inspections and testing of electrical equipment to identify faults, defects, and unsafe conditions.</li><li>Assist with troubleshooting electrical circuits, control systems, wiring, power distribution systems, and equipment.</li><li>Read and interpret basic electrical drawings, schematics, wiring diagrams, and technical documentation.</li><li>Support the testing, calibration, repair, and modification of electrical control and instrumentation systems.</li><li>Use electrical testing tools and equipment in accordance with approved procedures and safety requirements.</li><li>Maintain accurate records, inspection reports, maintenance logs, test results, and documentation of completed activities.</li><li>Assist in preparing field and office reports related to electrical work, inspections, findings, and equipment status.</li><li>Follow all applicable safety procedures, electrical codes, permit requirements, and project-specific requirements.</li><li>Assist with preventive and corrective maintenance activities at project and field locations.</li><li>Coordinate with higher-level technicians, engineers, and other project team members to complete assigned work.</li><li>Perform routine and occasionally physical tasks in office, industrial, construction, and field environments.</li><li>Travel to and work at field locations as required.</li><li>Perform other responsibilities associated with this position as appropriate.</li></ul><li><br><br><br></li><strong>What Required Skills You'll Bring<br><br></strong><ul><li>Must be a Saudi National.</li><li>Diploma or Associate degree in Electrical Engineering, Electrical Technology, Electromechanical Engineering, or a related discipline.</li><li>Minimum of 3 years of related professional experience.</li><li>Basic knowledge of electrical installation, maintenance, inspection, testing, and troubleshooting.</li><li>Ability to read and interpret electrical drawings, schematics, wiring diagrams, and technical manuals.</li><li>Knowledge of electrical tools, testing equipment, control panels, wiring systems, motors, generators, pumps, and power distribution equipment.</li><li>Ability to follow instructions, standard operating procedures, safety requirements, and electrical work practices.</li><li>Ability to maintain accurate records, logs, reports, and technical documentation.</li><li>Ability to work effectively under the supervision of senior technicians, engineers, and professional staff.</li><li>Ability to work in office, industrial, construction, and field environments.</li><li>Willingness to travel and work at project and field locations as required.</li><li>Ability to perform routine physical and occasionally heavy labor activities.</li><li>Basic understanding of electrical health and safety requirements, including lockout/tagout procedures and safe work practices</li></ul><li><br><br><br></li><strong>What Desired Skills You'll Bring<br><br></strong><ul><li>Experience working on large infrastructure, construction, industrial, utility, or facilities projects.</li><li>Experience with electrical systems, power distribution equipment, control panels, generators, motors, pumps, lighting systems, and instrumentation.</li><li>Experience performing preventive and corrective maintenance on electrical equipment.</li><li>Experience using multimeters, insulation resistance testers, clamp meters, electrical test equipment, and related tools.</li><li>Familiarity with low-voltage and medium-voltage electrical systems.</li><li>Familiarity with electrical control systems, instrumentation, and automation equipment.</li><li>Knowledge of applicable electrical codes, standards, and safety requirements.</li><li>Experience preparing inspection reports, maintenance records, testing documentation, and equipment logs.</li><li>Relevant electrical or safety certifications are preferred.</li></ul><li><br><br><br></li>Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information.<br><br>We truly invest and care about our employee’s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest—APPLY TODAY!<br><br>Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/.

In a world of possibilities, pursue one with endless opportunities. Imagine Next!<br><br>At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what’s possible.<br><br><strong>Job Description<br><br></strong>Parsons is looking for an amazingly talented <strong>Electrical Technician – Saudi National</strong> to join our team! In this role you will get to support the installation, inspection, testing, maintenance, and troubleshooting of electrical systems and equipment across office and field locations.<br><br><strong>What You'll Be Doing<br><br></strong><ul><li>Perform routine electrical installation, maintenance, inspection, testing, and repair activities under the supervision of senior technicians and professional staff.</li><li>Assist with the installation, operation, and maintenance of electrical systems, equipment, panels, generators, motors, pumps, lighting systems, and related components.</li><li>Conduct basic inspections and testing of electrical equipment to identify faults, defects, and unsafe conditions.</li><li>Assist with troubleshooting electrical circuits, control systems, wiring, power distribution systems, and equipment.</li><li>Read and interpret basic electrical drawings, schematics, wiring diagrams, and technical documentation.</li><li>Support the testing, calibration, repair, and modification of electrical control and instrumentation systems.</li><li>Use electrical testing tools and equipment in accordance with approved procedures and safety requirements.</li><li>Maintain accurate records, inspection reports, maintenance logs, test results, and documentation of completed activities.</li><li>Assist in preparing field and office reports related to electrical work, inspections, findings, and equipment status.</li><li>Follow all applicable safety procedures, electrical codes, permit requirements, and project-specific requirements.</li><li>Assist with preventive and corrective maintenance activities at project and field locations.</li><li>Coordinate with higher-level technicians, engineers, and other project team members to complete assigned work.</li><li>Perform routine and occasionally physical tasks in office, industrial, construction, and field environments.</li><li>Travel to and work at field locations as required.</li><li>Perform other responsibilities associated with this position as appropriate</li></ul><li><br><br><br></li><strong>What Required Skills You'll Bring<br><br></strong><ul><li>Must be a Saudi National.</li><li>Diploma or Associate degree in Electrical Engineering, Electrical Technology, Electromechanical Engineering, or a related discipline.</li><li>Minimum of 3 years of related professional experience.</li><li>Basic knowledge of electrical installation, maintenance, inspection, testing, and troubleshooting.</li><li>Ability to read and interpret electrical drawings, schematics, wiring diagrams, and technical manuals.</li><li>Knowledge of electrical tools, testing equipment, control panels, wiring systems, motors, generators, pumps, and power distribution equipment.</li><li>Ability to follow instructions, standard operating procedures, safety requirements, and electrical work practices.</li><li>Ability to maintain accurate records, logs, reports, and technical documentation.</li><li>Ability to work effectively under the supervision of senior technicians, engineers, and professional staff.</li><li>Ability to work in office, industrial, construction, and field environments.</li><li>Willingness to travel and work at project and field locations as required.</li><li>Ability to perform routine physical and occasionally heavy labor activities.</li><li>Basic understanding of electrical health and safety requirements, including lockout/tagout procedures and safe work practices</li></ul><li><br><br><br></li><strong>What Desired Skills You'll Bring<br><br></strong><ul><li>Experience working on large infrastructure, construction, industrial, utility, or facilities projects.</li><li>Experience with electrical systems, power distribution equipment, control panels, generators, motors, pumps, lighting systems, and instrumentation.</li><li>Experience performing preventive and corrective maintenance on electrical equipment.</li><li>Experience using multimeters, insulation resistance testers, clamp meters, electrical test equipment, and related tools.</li><li>Familiarity with low-voltage and medium-voltage electrical systems.</li><li>Familiarity with electrical control systems, instrumentation, and automation equipment.</li><li>Knowledge of applicable electrical codes, standards, and safety requirements.</li><li>Experience preparing inspection reports, maintenance records, testing documentation, and equipment logs.</li><li>Relevant electrical or safety certifications are preferred.</li></ul><li><br><br><br></li>Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information.<br><br>We truly invest and care about our employee’s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest—APPLY TODAY!<br><br>Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/.

In a world of possibilities, pursue one with endless opportunities. Imagine Next!<br><br>At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what’s possible.<br><br><strong>Job Description<br><br></strong>Parsons is looking for an amazingly talented <strong>Electrical Technician – Saudi National</strong> to join our team! In this role you will get to support the installation, inspection, testing, maintenance, and troubleshooting of electrical systems and equipment across office and field locations.<br><br><strong>What You'll Be Doing<br><br></strong><ul><li>Perform routine electrical installation, maintenance, inspection, testing, and repair activities under the supervision of senior technicians and professional staff.</li><li>Assist with the installation, operation, and maintenance of electrical systems, equipment, panels, generators, motors, pumps, lighting systems, and related components.</li><li>Conduct basic inspections and testing of electrical equipment to identify faults, defects, and unsafe conditions.</li><li>Assist with troubleshooting electrical circuits, control systems, wiring, power distribution systems, and equipment.</li><li>Read and interpret basic electrical drawings, schematics, wiring diagrams, and technical documentation.</li><li>Support the testing, calibration, repair, and modification of electrical control and instrumentation systems.</li><li>Use electrical testing tools and equipment in accordance with approved procedures and safety requirements.</li><li>Maintain accurate records, inspection reports, maintenance logs, test results, and documentation of completed activities.</li><li>Assist in preparing field and office reports related to electrical work, inspections, findings, and equipment status.</li><li>Follow all applicable safety procedures, electrical codes, permit requirements, and project-specific requirements.</li><li>Assist with preventive and corrective maintenance activities at project and field locations.</li><li>Coordinate with higher-level technicians, engineers, and other project team members to complete assigned work.</li><li>Perform routine and occasionally physical tasks in office, industrial, construction, and field environments.</li><li>Travel to and work at field locations as required.</li><li>Perform other responsibilities associated with this position as appropriate.<br><br><br></li></ul><strong>What Required Skills You'll Bring<br><br></strong><ul><li>Must be a Saudi National.</li><li>Diploma or Associate degree in Electrical Engineering, Electrical Technology, Electromechanical Engineering, or a related discipline.</li><li>Minimum of 3 years of related professional experience.</li><li>Basic knowledge of electrical installation, maintenance, inspection, testing, and troubleshooting.</li><li>Ability to read and interpret electrical drawings, schematics, wiring diagrams, and technical manuals.</li><li>Knowledge of electrical tools, testing equipment, control panels, wiring systems, motors, generators, pumps, and power distribution equipment.</li><li>Ability to follow instructions, standard operating procedures, safety requirements, and electrical work practices.</li><li>Ability to maintain accurate records, logs, reports, and technical documentation.</li><li>Ability to work effectively under the supervision of senior technicians, engineers, and professional staff.</li><li>Ability to work in office, industrial, construction, and field environments.</li><li>Willingness to travel and work at project and field locations as required.</li><li>Ability to perform routine physical and occasionally heavy labor activities.</li><li>Basic understanding of electrical health and safety requirements, including lockout/tagout procedures and safe work practices.<br><br><br></li></ul><strong>What Desired Skills You'll Bring<br><br></strong><ul><li>Experience working on large infrastructure, construction, industrial, utility, or facilities projects.</li><li>Experience with electrical systems, power distribution equipment, control panels, generators, motors, pumps, lighting systems, and instrumentation.</li><li>Experience performing preventive and corrective maintenance on electrical equipment.</li><li>Experience using multimeters, insulation resistance testers, clamp meters, electrical test equipment, and related tools.</li><li>Familiarity with low-voltage and medium-voltage electrical systems.</li><li>Familiarity with electrical control systems, instrumentation, and automation equipment.</li><li>Knowledge of applicable electrical codes, standards, and safety requirements.</li><li>Experience preparing inspection reports, maintenance records, testing documentation, and equipment logs.</li><li>Relevant electrical or safety certifications are preferred.<br><br><br></li></ul>Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information.<br><br>We truly invest and care about our employee’s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest—APPLY TODAY!<br><br>Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/.

<p>We are looking for an experienced <strong>Engineering Manager – Design (Electrical)</strong> to join our team in Saudi Arabia.</p><strong>Responsibilities</strong><ul><li>Lead electrical design and engineering activities across projects.</li><li>Design and review <strong>Primary &amp; Secondary Electrical Systems</strong>.</li><li>Design <strong>earthing/grounding, lightning protection, lighting, emergency lighting, and lighting control systems</strong>.</li><li>Prepare and review <strong>SLDs, schematics, technical specifications, and detailed electrical layouts</strong>.</li><li>Manage design validation, verification, technical reviews, and approval processes.</li><li>Coordinate with clients, consultants, and multidisciplinary project teams.</li><li>Coordinate electrical interfaces with <strong>Civil, Structural, Architectural, BIM, Mechanical, Fire Protection, Firefighting, CCTV, Protection, and Secondary Design teams</strong>.</li><li>Ensure compliance with applicable codes, standards, specifications, and project requirements.</li><li>Support project execution from design development through final submission.</li><li>Provide technical support to proposal and estimation teams during bidding stages.</li><li>Participate in design reviews, client meetings, and technical discussions.</li></ul><strong>Requirements</strong><ul><li><strong>BE / BTech in Electrical Engineering</strong>.</li><li><strong>15+ years</strong> of relevant electrical design and engineering experience.</li><li>Minimum <strong>10 years of experience in GIS and AIS Substation design and engineering</strong>.</li><li>Strong knowledge of <strong>Primary &amp; Secondary Electrical Systems</strong>.</li><li>Strong leadership, coordination, and team-management skills.</li><li>Experience in <strong>utility and major infrastructure projects</strong> is highly preferred.</li></ul>

At Jacobs, we're challenging today to reinvent tomorrow by solving the world's most critical problems for thriving cities, resilient environments, mission-critical outcomes, operational advancement, scientific discovery and cutting-edge manufacturing, turning abstract ideas into realities that transform the world for good.<br><br>Your impact<br><br>At Jacobs, we push the limits of what is possible to make the world smarter and more connected. We are seeking a Senior Electrical Engineer to join our team at NEOM and provide technical leadership during the closeout and handover phase of a major water infrastructure programme.<br><br><strong>About Opportunity<br><br></strong>The Senior Electrical Engineer will lead the completion, commissioning, closeout, and handover of the electrical engineering scope across major water infrastructure assets. The role will focus on verifying that electrical installations have been completed, tested, documented, and handed over in accordance with approved designs, project specifications, safety requirements, and client expectations.<br><br>The successful candidate will coordinate with contractors, consultants, commissioning teams, operations representatives, and other engineering disciplines to resolve outstanding technical issues, close defects and non-conformances, verify project records, and support the safe and effective transfer of completed assets into operation.<br><br>Key Responsibilities<br><br><ul><li> Lead the completion, testing, commissioning, closeout, and handover of electrical systems associated with water transmission infrastructure, pumping stations, treatment facilities, substations, and related assets.</li><li> Review the status of outstanding electrical works, identify completion gaps and risks, and coordinate recovery actions to achieve project closeout milestones.</li><li> Verify that electrical installations comply with approved designs, project specifications, applicable codes and standards, quality requirements, and electrical safety procedures.</li><li> Review and close outstanding technical queries, punch-list items, non-conformance reports, design changes, concessions, and contractor action items.</li><li> Coordinate the completion of factory and site acceptance testing, system energization, functional testing, integrated systems testing, reliability testing, and performance demonstrations.</li><li> Review commissioning records, test results, electrical safety documentation, energization procedures, protection settings, inspection reports, and final acceptance evidence.</li><li> Coordinate electrical interfaces with mechanical, process, civil, structural, instrumentation, control, SCADA, telecommunications, and operations teams to confirm that systems are fully integrated and ready for operation.</li><li> Review and verify closeout documentation, including as-built drawings, approved design changes, operation and maintenance manuals, asset registers, spare-parts records, warranties, training records, and equipment certificates.</li><li> Support final inspections, asset acceptance, contractor demobilization, operational readiness, and the formal transfer of electrical systems to the client and operations teams.</li><li> Provide technical leadership, resolve complex electrical issues, mentor junior engineers, and maintain effective communication with contractors, consultants, vendors, utility providers, client representatives, and project stakeholders.<br><br><br></li></ul>Here's what you'll need<br><br><ul><li> Education A bachelor’s degree in electrical engineering, Electrical Power Engineering, or related discipline is preferred. Professional engineering registration, chartership, or membership of a recognized engineering institution would be advantageous.</li><li> Experience Minimum 10 years of relevant electrical engineering experience, including construction completion, testing, commissioning, closeout, and handover of major infrastructure projects.</li><li> Sector and Technical Expertise Experience with water infrastructure, pumping stations, treatment facilities, utilities, or industrial assets, supported by strong knowledge of high-voltage, medium-voltage, and low-voltage systems, substations, transformers, switchgear, motor control centers, variable frequency drives, generators, motors, protection systems, cabling, earthing, and electrical distribution.</li><li> Closeout and Commissioning Demonstrated experience managing punch lists, non-conformances, technical queries, acceptance testing, energization, commissioning records, as-built documentation, operation and maintenance manuals, asset data, operational readiness, and final handover.</li><li> Engineering Standards and Digital Capability Strong knowledge of applicable IEC, IEEE, NFPA, NEC, ISO, local authority, and electrical safety requirements, with experience using electrical design and analysis software such as ETAP, DIgSILENT PowerFactory, or equivalent, and platforms such as AutoCAD, Revit, BIM, or Autodesk Construction Cloud.</li><li> Leadership and Communication Strong technical leadership, analytical thinking, problem-solving, professional judgement, stakeholder management, multidisciplinary coordination, communication, documentation review, and mentoring skills.<br><br><br></li></ul>Jacobs. A world where you can. From our inclusive employee networks to our positive mental health champions, we’re committed to driving a culture of caring where you can be you. Joining Jacobs not only connects you locally but globally, and together, our diverse perspectives and unique backgrounds power our collective strength.<br><br>With safety and flexibility always top of mind, we’ve gone beyond traditional ways of working so you have the support, means, and space to maximize your potential. You’ll uncover flexible working arrangements, benefits, and opportunities to do good too, from participating in our global giving and volunteering program to exploring new and inventive ways to help our clients make the world a better place.<br><br>Start your Jacobs career with a company that inspires and empowers you to deliver your best work so you can evolve, grow, and succeed, today and into tomorrow.<br><br>From our inclusive employee networks to our positive mental health champions – we’re committed to driving a culture of caring where you can be you. Joining Jacobs not only connects you locally but globally - and together, our diverse perspectives and unique backgrounds power our collective strength. We collaborate and share! By supporting one another, we all succeed.<br><br>With safety and flexibility always top of mind, we’ve gone beyond traditional ways of working so you have the support, means and space to maximize your potential. You’ll uncover flexible working arrangements, benefits and opportunities to do good too – from participating in our global giving and volunteering program, to exploring new and inventive ways to help our clients make the world a better place.<br><br>No matter what drives you, you’ll discover how you can cultivate, nurture and achieve your goals – all at a single global company.<br><br>Onsite employees are expected to attend a Jacobs Workplace on a full-time basis, as required by the nature of their role.<br><br>Your application experience is important to us, and we’re keen to adapt to make every interaction even better. If you require further support or reasonable adjustments with regards to the recruitment process (for example, you require the application form in a different format), please contact the team via Careers Support.

<p><strong>We're Hiring | Draftsman – Electrical &amp; ELV</strong></p><p><br></p><p><strong>Lantern Systems Co. Ltd.</strong></p><p><br></p><p>We are looking for an experienced <strong>Draftsman – Electrical &amp; ELV</strong> to join our team.</p><p><br></p><p><strong>Job Purpose</strong></p><p>The Draftsman is responsible for preparing, updating, and maintaining engineering drawings and CAD models for Electrical, Telecommunications, ELV, and Security Systems in accordance with project specifications, client requirements, international standards, and company drafting procedures.</p><p>The role supports design development, construction documentation, IFC/As-Built drawing preparation, and document control activities throughout the project lifecycle.</p><p>Key Responsibilities</p><p><strong>1. Drawing &amp; Documentation Control</strong></p><p>Prepare the following drawings:</p><ul><li>Concept Drawings</li><li>IFR (Issued for Review) Drawings</li><li>IFI (Issued for Information) Drawings</li><li>IFC (Issued for Construction) Drawings</li><li>As-Built Drawings</li><li>Shop Drawings</li><li>Detailed Installation Drawings</li></ul><p>Additional responsibilities:</p><ul><li>Maintain drawing registers and revision history.</li><li>Ensure all drawings comply with project CAD standards, drafting procedures, and document numbering systems.</li><li>Support preparation of engineering deliverables for Aconex, client submissions, and consultant reviews.</li></ul><p><strong>2. Coordination &amp; Site Support</strong></p><ul><li>Coordinate with engineers, construction teams, subcontractors, and vendors for drawing development.</li><li>Review site conditions and update drawings based on red-line markups.</li><li>Support technical queries and drawing clarifications during construction.</li></ul><p>Required Qualifications</p><p><strong>Education</strong></p><ul><li>Diploma or Bachelor’s Degree in Drafting or a related field.</li></ul><p><strong>Experience &amp; Technical Requirements</strong></p><ul><li>Minimum <strong>3–5 years</strong> of drafting experience in Electrical, Telecom, ELV, or Security System projects.</li><li>Experience in EPC, industrial, infrastructure, oil &amp; gas, utility, or HCIS security projects is preferred.</li><li>Ability to interpret engineering specifications, vendor drawings, and design calculations.</li><li>Knowledge of electrical and ELV drafting standards.</li></ul><p><br></p>

<h3><strong>About the Role</strong></h3><p>Lantern Systems Co. Ltd. is seeking an experienced <strong>Draftsman – Electrical &amp; ELV</strong> to join their team in Tabuk, Saudi Arabia. This is a full-time position for professionals with 3-5 years of relevant experience. The Draftsman will be responsible for preparing, updating, and maintaining engineering drawings and CAD models for various electrical and low-voltage systems.</p><h3><strong>Role Overview</strong></h3><p>The primary function of this role is to ensure all Electrical, Telecommunications, ELV, and Security Systems drawings comply with project specifications, client requirements, international standards, and company drafting procedures. The Draftsman will provide essential support for design development, construction documentation, and the preparation of IFC/As-Built drawings, as well as document control activities throughout the project lifecycle.</p><h3><strong>Key Responsibilities</strong></h3><ul><li><strong>Drawing &amp; Documentation Control:</strong>Prepare Concept Drawings, IFR (Issued for Review) Drawings, IFI (Issued for Information) Drawings, IFC (Issued for Construction) Drawings, As-Built Drawings, Shop Drawings, and Detailed Installation Drawings.</li><li>Maintain drawing registers and revision history for all project documentation.</li><li>Ensure all drawings adhere to project CAD standards, established drafting procedures, and document numbering systems.</li><li>Support the preparation of engineering deliverables for Aconex, client submissions, and consultant reviews.</li><li><strong>Coordination &amp; Site Support:</strong>Coordinate effectively with engineers, construction teams, subcontractors, and vendors to facilitate drawing development.</li><li>Review site conditions and update drawings based on red-line markups provided by site teams.</li><li>Provide support for technical queries and drawing clarifications during the construction phase.</li></ul><h3><strong>Experience and Qualifications</strong></h3><ul><li>A minimum of 3 to 5 years of experience as a Draftsman, specifically in Electrical and ELV systems.</li><li>Proficiency in preparing engineering drawings and CAD models.</li><li>Demonstrated ability to work in accordance with project specifications, client requirements, and international standards.</li><li>Experience with document control activities and maintaining drawing registers.</li></ul><h3><strong>Work Environment</strong></h3><p>This full-time position is based in Tabuk, Saudi Arabia, and involves working as part of a dedicated team at Lantern Systems Co. Ltd.</p>