- Al Ahsa Saudi
41 Jobs Found
Save and set alert for similar positionsManage alerts
Head of Engineering Eastern Province, Saudi Arabia | Full-time<br>We are seeking a Head of Engineering to lead our engineering consultancy and design function, serving as the senior technical authority across civil, mechanical, and electrical disciplines. This is an advisory and design leadership role — not a general management position. The role is responsible for providing engineering consulting services to our group's operating entities, charity projects, and stakeholders, as well as supporting operations with technical oversight on fit-out, renovation, and maintenance projects. The Head of Engineering also oversees offshore CAD drafting and interior design resources, manages the department's document control function, and ensures all engineering deliverables meet quality, regulatory, and client requirements.<br>Key Accountabilities Engineering Consultancy Provide civil, mechanical, and electrical engineering consulting to group entities and stakeholders. Conduct site assessments, feasibility reviews, and technical evaluations. Act as owner's representative in dealings with external engineering offices and contractors. Design & Drafting Management Oversee production of engineering drawings, Auto CAD drafts, specifications, and design packages. Manage and coordinate offshore CAD and interior/landscape design resources. Review and approve all drawings before issue. Maintain structured document control through the Admin Assistant / Document Controller. Technical Support to Operations Provide engineering guidance to the operations team on fit-out, renovation, and maintenance projects. Review project scopes, specifications, and technical requirements. Advise on material selection, construction methods, and engineering solutions for complex issues. Quality Assurance & Standards Establish and enforce engineering quality standards, drawing conventions, and specification templates. Ensure compliance with Saudi building codes, municipal regulations, and industry standards. Conduct periodic deliverable reviews for accuracy and compliance. Team Leadership & Development Lead, mentor, and evaluate in-house engineers and the offshore design team. Manage workload allocation across consulting engagements, design work, and operations support. Identify training needs and participate in engineering recruitment decisions. Reporting & Coordination Prepare monthly engineering activity reports covering ongoing projects, resource utilization, and deliverable status. Coordinate with the Operations Manager. Liaise with external consultants, contractors, and regulatory authorities. Support business development proposals and client presentations. Other Perform any other duties reasonably required by the General Manager consistent with the scope of this role.<br>Competencies Core: ▸ Civil Engineering — Strong expertise in civil design, structural assessment, and construction supervision ▸ Multi-Discipline Knowledge — Working knowledge of mechanical, electrical, and plumbing systems ▸ Auto CAD & Design Tools — Proficiency in Auto CAD; ability to review and approve technical drawings ▸ Building Codes & Regulations — Familiarity with Saudi building codes and construction standards ▸ Project Technical Oversight — Ability to provide guidance on fit-out, renovation, and maintenance projects<br>Soft: ▸ Leadership — Proven ability to lead a small, multi-discipline team including remote/offshore resources ▸ Communication — Ability to explain complex engineering concepts to non-technical stakeholders ▸ Organizational Skills — Strong document control instincts and deliverable tracking ▸ Problem Solving — Practical, solutions-oriented approach in a resource-constrained environment ▸ Collaboration — Ability to influence through expertise rather than hierarchy<br>Job Specifications Industry: General Contracting / Facility Management / Engineering Consultancy Experience:▸ 10 to 15 years in civil engineering, with at least 5 years in a supervisory or lead role▸ Experience providing engineering consultancy across civil, mechanical, and electrical disciplines in a contracting or facility management environment▸ Proven experience managing engineering design teams, including offshore/remote resources▸ Familiarity with fit-out, renovation, and maintenance work in commercial and industrial facilities ▸ GCC experience preferred<br>Education: ▸ Bachelor's degree in Civil Engineering or a closely related discipline▸ Professional Engineer (PE) registration or equivalent is preferred▸ Master's degree or professional certification (PMP, LEED) is an advantage<br>Languages:▸ Arabic — Native▸ English — Advanced proficiency
At Air Products, we reimagine what’s possible. By tapping into the motivation of our people and our collective experience, we create the ideas and innovations that drive us forward. When we come together – where every voice is heard and everyone knows they belong and matter – we create solutions that launch people into space, support lifesaving care in hospitals, and enable the construction of groundbreaking, world scale production facilities.<br><br>Reimagine What’s Possible <br><br>Purpose<br><br>The Senior Process Controls Engineer works closely with Maintenance, Operations, Engineering and Technical Management to coordinate, organize and execute process controls activities for preventive and corrective maintenance. The role aims to reduce maintenance-related costs while improving plant reliability and availability in line with business needs across Air Separation Units (ASU), Steam Methane Reformers (HYCO), CO2 capture, utilities and associated ancillary equipment. The role may also support joint venture partners, equipment sales customers and new customers as required by BHIG.<br><br>Nature & Scope<br><br>Reporting to the Engineering Manager, the Senior Process Controls Engineer provides day-to-day technical support to maintain the safe, reliable and efficient operation of process control systems and low-voltage instrumentation and controls equipment. The role plans and executes preventive and corrective maintenance activities in coordination with Maintenance Management, Operations and Engineering and works closely with internal and external resources to ensure safe and reliable execution.<br><br>The facilities cover multiple technologies, including ASU, HYCO, CO2 production and H2 mobility. The incumbent routinely interfaces with Operations, Maintenance and Instrument Technicians to provide troubleshooting support, work instructions and technical guidance for process control systems. The position requires teamwork, clear communication, organization, change management, work-process optimization, planning, leadership, and hands-on technical capability across related disciplines.<br><br>Safety<br><br>Principal Accountabilities<br><br> Maintain a safe work environment and demonstrate visible leadership in BHIG and industry safe-work processes to prevent injuries. Ensure appropriate documentation is maintained for safety-related activities. Provide technical support and safety leadership for Management of Change (MOC), Operational/Process Hazard Reviews (OPHR), Safety Integrity Level (SIL) assessments and other process-safety initiatives. Consult BHIG and shareholder process safety specialists as required. Support the implementation, audit and revalidation of Critical Safety Systems (CSS), Safety Instrumented Systems (SIS) and Safety Instrumented Functions (SIF), including the applicable lifecycle documentation and testing requirements.<br><br>Technical<br><br> Provide technical solutions and lead execution planning for SAP PM activities covering plant instrumentation, analyzers, gas chromatography and process control systems, including DCS, local PLCs and associated control loops. Maintain long-term instrumentation and controls plans covering calibration, spare-parts management, control logic, programming, graphics changes, operational changes, system migration and backup management. Perform SIL assessments and verification and support SIS and SIF lifecycle activities. Provide engineering support and prepare punch lists during plant construction and commissioning. Ensure timely closure of punch items, accurate document control and compliance with quality assurance requirements. Interface with Process Engineering to identify gaps and develop improved operating and control strategies to achieve productivity targets. Develop tracking programs and metrics for plant optimization, efficiency and controller on-stream performance. Interface with Advanced Controls resources to define DCS interface requirements and jointly design, implement and test the required interfaces. Support plant productivity and improvement projects, including instrument specification, control-system configuration, detailed cable and wiring design, and preparation of work packages for contractor bidding and installation. Maintain current engineering specifications and sizing calculations for procurement of instrumentation and controls equipment, including control valves, flowmeters, inline devices, transmitters and analyzers. Provide engineering input to develop and maintain instrumentation and controls standards, procedures, best practices, inspection contracts and contractor-selection guidelines. Lead and provide technical support for new installations, existing plant modifications, ongoing operations, continuous improvement and maintenance activities across BHIG facilities. Ensure compliance with legal requirements and BHIG safety and technical standards. Provide technical support for BHIG equipment-sales activities, existing plant modifications, operations, continuous improvement and maintenance services for customers in the Region through site visits, remote support or the Process Intelligence Center. Provide technical leadership for investigations and Root Cause Analysis (RCA) to identify and implement sustainable corrective and preventive actions.<br><br>Operations<br><br> Provide process-controls engineering support to operate ASU, HYCO, CO2 and H2 mobility facilities safely and reliably while meeting customer requirements for product quality, supply flexibility and contractual compliance. Ensure BHIG standards and applicable shareholder best practices for EH&S, productivity, reliability, quality and customer service are met. Provide technical support to commissioning teams during commissioning, start-up and troubleshooting activities and participate in Operations training before plant commissioning. Assist Operations in maintaining accurate document control and monitoring quality assurance initiatives. Maintain alignment with Plant Managers, Site Leadership, and the Business Area on asset-management opportunities and commercial priorities. Provide technical support for turnarounds and major maintenance activities. Establish and maintain compliance with applicable company requirements, local regulations, technology standards and codes consistent with BHIG operational objectives. Participate in technical reviews, equipment design, installation, operation and optimization, including validation, Mechanical Integrity, Management of Change and procedure development and implementation.<br><br>Repair & Maintenance<br><br> Establish and maintain close working relationships with Process Engineering, Operations and Maintenance personnel to continuously monitor and evaluate plant performance and process-control systems and equipment. Develop and implement comprehensive maintenance plans for process-control systems and equipment and provide technical guidance and detailed instructions to schedule, execute and monitor plan compliance. Develop engineering solutions for repetitive failures and other conditions that adversely affect plant operations. Provide engineering support and participate in or lead incident investigations and RCA activities. Identify and implement sustainable corrective actions. Guide the Maintenance team in setting spare-parts inventory levels, managing quality and developing inventory strategies.<br><br>Project Management / Budget<br><br> Apply appropriate project-development and project-management practices, including scope, budget, schedule, execution strategy, risk planning and cost reporting, for projects and turnaround activities. Provide engineering support in developing the annual budget for process-control systems and equipment maintenance, repair and system upgrades.<br><br>Professional<br><br> Lead by example and promote teamwork through open communication, active listening, and timely issue resolution. Drive continuous improvement in safety performance, reliability, and cost of quality. Build and maintain positive working relationships with internal and external stakeholders. Support, mentor and develop instrument technicians and less-experienced engineers.<br><br>Minimum Requirements And Qualifications<br><br>Education & Experience<br><br> Bachelor's degree in Instrumentation, Control, Electrical, Electronics or related engineering discipline. Minimum 10 years of relevant process automation experience in chemical, refinery or gas-plant maintenance, inspection or engineering. Demonstrated hands-on plant experience in troubleshooting, maintenance, commissioning and operation of instrumentation and process-control systems. Experience with Air Separation, HYCO, and gasification process systems is preferred.<br><br>Technical Skills<br><br> Troubleshooting and maintenance-level knowledge of Siemens PCS 7 Distributed Control Systems, including specifications, configuration and programming using PCS 7, STEP 7 and Win CC. Experience with other control platforms is an advantage. Demonstrated ability to configure, calibrate, troubleshoot and repair process instrumentation for temperature, pressure, flow, voltage and other process variables. Working knowledge of industrial computer networks and demonstrated logical, systematic troubleshooting and problem-solving capability. Knowledge of SIL, SIS, SIF and Supervisory Control and Data Acquisition (SCADA) principles and applications. Knowledge of applicable oil, gas and refining industry codes and standards, including API, ISA, NEC/IEC, NFPA and ASME. Knowledge of Saudi Aramco standards and working practices is preferred. Knowledge of process safety, occupational health and applicable local environmental requirements. Proficiency in Microsoft Office and relevant engineering, maintenance and data-historian applications.<br><br>Leadership & Behavioral Competencies<br><br> Strong commitment to employee involvement, teamwork, diversity, and inclusion. Ability to communicate effectively with management, Operations, Maintenance, customers and contractors. Proficiency in spoken and written English is required; Arabic language capability is an advantage. Demonstrated leadership, organizational, computer, interpersonal and written and verbal communication skills. Confident, self-motivated, results oriented and committed to continuous improvement. Formal training and experience in Six Sigma and continuous improvement tools is a plus.<br><br>Founded in 1940, Air Products is a world-leading industrial gases company and has a proud history of innovation, operational excellence, with an unwavering commitment to safety and environmental stewardship. Working together, we are taking our passion and diverse backgrounds forward to reimagine what’s possible and generate a cleaner future for our customers, our communities, and the world.
Job Summary: The QC Inspector performs inspection and testing of piping, civil, and mechanical construction activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>Duties & Responsibilities:<br><br>Perform in-process and final inspections on piping, civil, and mechanical works. Witness hydrotests, NDE activities, and other required tests per the ITP. Verify materials, welding, and installation against approved drawings and specifications. Record inspection results and raise Non-Conformance Reports as required. Coordinate hold points and inspections with client/third-party inspectors. Maintain inspection records, checklists, and daily QC reports. Verify calibration status of measuring and test equipment used on site. Support punch-list generation and verification of closure. Ensure work fronts comply with approved method statements. Report quality issues and trends to the QC Manager. Support preparation of quality documentation for handover dossiers.<br><br>Requirements<br><br>Experience: 5+ years of experience as a QC Inspector on piping/civil/mechanical construction projects.<br><br>Education:<br><br>Diploma or Bachelor's degree in Mechanical/Civil Engineering. QC/inspection certification (e.g., CSWIP, CWI) preferred.<br><br>Required Skills & Abilities:<br><br>1- Core Competencies:<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>2- Technical Skills:<br><br>Piping/Civil Inspection Techniques Reading Isometrics, P&IDs, and Civil Drawings Welding Inspection Basics / NDE Awareness Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting
Job Summary: The QC Manager is responsible for establishing and managing the project quality control system, ensuring all piping, civil, and mechanical works meet contractual, code, and specification requirements through inspection, testing, and non-conformance management.<br><br>Duties & Responsibilities:<br><br>Develop and implement the project Quality Control Plan and Inspection & Test Plans (ITPs). Manage and supervise QC Inspectors across the piping, civil, and mechanical disciplines. Ensure inspections, tests, and hold points are executed per approved ITPs and specifications. Review and approve inspection reports, NDE reports, and material certificates. Manage the Non-Conformance Report (NCR) process, including root cause and corrective action. Coordinate third-party inspection, client inspection, and certification activities. Ensure calibration and control of inspection and test equipment. Conduct internal quality audits and site quality walkdowns. Compile quality documentation for final dossiers and project handover. Liaise with client/consultant QA/QC representatives on quality matters. Provide quality performance reporting to project management. Support training and awareness of QC requirements across site teams.<br><br>Requirements<br><br>Experience: +10 years of experience in quality control/assurance on EPC or industrial construction projects, including supervisory experience.<br><br>Education:<br><br>Bachelor's degree in Engineering (Mechanical/Civil) or a related field. Certified Welding Inspector (CWI) or equivalent QC certification preferred.<br><br>Required Skills & Abilities:<br><br>1- Core Competencies:<br><br>Attention to Detail Analytical Thinking Integrity Communication Skills Decision Making Leadership<br><br>2- Technical Skills:<br><br>Quality Management Systems (ISO 9001) Welding & NDE Standards (ASME, API, etc.) Piping & Civil Inspection Techniques Inspection & Test Plan (ITP) Development NCR & Corrective Action Management Reading Technical Drawings & Specifications
Job Description: Mechanical Engineer<br>We’re Hiring!<br>We are seeking an experienced Mechanical to join our team for Saudi Aramco–approved and others Potential clients’ projects, ensuring high-quality construction, safety, and compliance with engineering standards.<br>Role Purpose<br>Responsible for supporting the engineering, procurement, construction, testing, and execution of mechanical works for industrial and EPC projects, ensuring compliance with project specifications, approved drawings, applicable standards, schedule, quality, and HSE requirements.<br>Key Responsibilities• Review mechanical drawings, specifications, datasheets, BOQs/MTOs, and scope of work.• Review technical submittals, material specifications, method statements, and vendor documentation.• Coordinate mechanical activities with engineering, procurement, construction, QA/QC, HSE, and project controls.• Support preparation and verification of material take-offs.• Participate in technical bid evaluations for vendors and subcontractors.• Monitor site mechanical works and resolve technical issues.• Prepare/respond to RFIs and technical queries.• Monitor interfaces between mechanical works and other disciplines.• Participate in inspections, testing, pre-commissioning, commissioning, and project close-out.• Maintain appropriate engineering and project records.<br>Qualifications & Experience• Bachelor’s Degree in Mechanical Engineering.• Minimum 5 years of relevant experience preferred.• Experience in industrial, Oil & Gas, infrastructure, construction, or EPC projects.• Saudi Arabia project experience preferred.• Saudi Aramco, SABIC, SEC, or major industrial client experience is an advantage.<br>Technical Competencies• Mechanical drawings and specifications.• Piping/mechanical equipment and industrial systems.• BOQ/MTO preparation and review.• Technical bid and vendor-document review.• Auto CAD and MS Office.• Knowledge of relevant international engineering codes and standards.<br>GENERAL RECRUITMENT REQUIREMENTSCandidates should demonstrate:• Relevant academic/technical qualifications for the position.• Relevant industrial, construction, infrastructure, Oil & Gas, or EPC experience.• Good written and verbal communication skills.• Ability to work within multidisciplinary project teams.• Strong commitment to safety, quality, cost, and schedule.• Professional accountability and ability to work in a developing project organization.• Previous Saudi Arabia experience is preferred.• Familiarity with Saudi Aramco, SABIC, SEC, or other major Saudi industrial clients is an advantage where relevant to the position.• English communication capability appropriate to the position.<br>HEMAMCO reserves the right to assess candidates against project-specific client requirements, professional certifications, technical competencies, and relevant experience before final selection.
We are looking for a Mechanical Engineer to join our Projects in Dammam<br>Key Responsibilities<br>Supervise preventive and corrective maintenance of HVAC, ventilation, plumbing, drainage, water supply, sewage, fire-fighting, LPG, and water treatment systems. Monitor daily mechanical operations and troubleshoot equipment faults. Supervise mechanical technicians and service contractors. Ensure compliance with mechanical codes, safety regulations, and Civil Defense requirements. Coordinate mechanical shutdowns with mall operations and tenants. Monitor HVAC performance and support energy-efficiency initiatives. Conduct inspections and condition assessments of mechanical equipment. Support CAPEX projects, renovations, and tenant fit-out activities. Prepare maintenance and KPI reports. Manage spare-parts requirements and ensure maintenance activities are updated in CAFM/CMMS. Participate in emergency response, incident investigations, and troubleshooting activities. Support 24/7 mall operations, including emergency call-outs when required.<br>Requirements Bachelor’s Degree in Mechanical Engineering.5–7 years of experience in Facilities Management. Experience in shopping malls, commercial buildings, hospitals, or mixed-use developments. Strong hands-on experience with:Chillers, AHUs, FCUs, Package Units & Split ACsPlumbing & Drainage Systems Water Supply & Booster Pumps Sewage & Storm Water Systems Fire Fighting & Fire Pump Systems LPG Systems Ventilation & Exhaust Systems Preventive & Corrective Maintenance Contractor & Service Provider Management Good English communication and MS Office skills. Experience with CMMS/CAFM systems is preferred. Knowledge of Saudi mechanical codes and Civil Defense requirements is preferred. Experience with BMS integration, D365, CAFM/CMMS, and energy-efficiency initiatives is an advantage. Ability to read mechanical and electrical drawings.
Required to join an established building and facilities management contractor in the Eastern Province of Saudi Arabia. Based on site (this may be remote) you will take responsibility forthe day-to-day Operation & Maintenance activities on Site; Analyse trends and takes corrective action Ensures that responsibilities are assigned and associated authorizations delegated; Provides leadership, maintains good personnel relations and provides support; Structures and maintains information / communication flows between upstream and downstream parties. Ensures that works are established within established Quality Control Standards Applies the principles and techniques of site-supervision including; planning, organizing, staffing, leadership and control, and maintaining of discipline. Manage and monitors training/support for Saudi Trainees, as and when required; Monitors career development and appraise site personnel. Coordinates and liaise with Client Coordinates and liaise with the Company’s Project, Operations and Commercial Management<br>Applicants should meet the following criteria Degree in Mechanical or Electrical Engineering or equivalent experience. Minimum of 8 years experience in the broad spectrum of operation & maintenance function Knowledge of standards pertaining to SFG20, C4, Mechanical, Electrical and HVAC maintenance; environmental safety work practices. Happy to work in remote location Excellent communication & stakeholder management skills
Job Summary:We are looking for a motivated Mechanical Engineer to join our team in the metal recycling industry. The role will support maintenance, equipment reliability, production operations, and continuous improvement activities within the recycling plant.<br>Key Responsibilities:Support the maintenance and operation of mechanical equipment and machinery. Assist in preventive and corrective maintenance activities. Inspect equipment and identify mechanical faults and abnormalities. Support troubleshooting and repair of mechanical systems. Monitor equipment performance and assist in reducing breakdowns and downtime. Support the operation and maintenance of recycling equipment and production lines. Assist in implementing maintenance plans and procedures. Prepare maintenance reports and maintain equipment records. Coordinate with production and maintenance teams to ensure smooth plant operations. Follow company safety, quality, and environmental requirements. Participate in continuous improvement and equipment efficiency initiatives.<br>Requirements:Bachelor’s degree in Mechanical Engineering. Fresh graduate or up to 1 year of relevant experience. Strong interest in mechanical maintenance and industrial equipment. Basic knowledge of mechanical systems, maintenance, and troubleshooting. Good analytical and problem-solving skills. Good communication and teamwork skills.
Job Description The Quality Inspector is responsible for ensuring that all parts and assemblies of oilfield drilling and completion tools produced or maintained in the workshop meet the required quality and technical standards. The role involves inspecting mechanical parts and assemblies, interpreting engineering drawings, and verifying product conformity using precision measurement tools. The Quality Inspector supports workshop operations by identifying non-conformities, assisting in root cause analysis, and collaborating with production and engineering teams to ensure continuous quality improvement and compliance with company and client requirements.<br>Duties and responsibilities1. Read and interpret engineering drawings, technical specifications, and inspection standards.2. Perform incoming, in-process, and final inspections of drilling and completion tools, components, and assemblies.3. Conduct visual inspections to identify defects, wear, corrosion, or other quality concerns.4. Use precision measuring tools (e.g., calipers, micrometers, gauges, and thread measurement devices) to verify dimensional accuracy and tolerances.5. Record, document, and report inspection findings, non-conformance reports (NCRs), and corrective action requests.6. Assist in the analysis of defects and failures to support root cause investigation and corrective actions.7. Ensure all inspection activities comply with company QA/QC procedures, safety standards, and customer specifications.8. Support calibration management and ensure all inspection instruments are properly maintained and traceable.9. Participate in internal and external audits and contribute to continuous improvement initiatives. <br>Qualifications & Requirements1. Diploma or bachelor’s degree in mechanical engineering, industrial engineering, or related technical field.2. Minimum 5 years of QA/QC or inspection experience in the mechanical manufacturing of oilfield drilling and completion tools.3. Strong ability to read and interpret technical drawings, assembly procedures, and engineering standards.4. Familiar with API, ISO, and industry quality requirements for drilling and completion tools.5. Proficient in using precision measuring instruments.6. Basic understanding of machining and mechanical assembly processes.7. Good communication and teamwork skills, with strong attention to detail.8. Proficient in English (spoken and written) and in Microsoft Office (Word, Excel).9. High sense of responsibility, safety awareness, and continuous improvement mindset.
Production Engineer – Manufacturing / Steel Fabrication Location: Saudi Arabia Industry: Manufacturing / Steel Fabrication<br>We are supporting a well-established manufacturing and fabrication business in Saudi Arabia with the appointment of an experienced Production Engineer. This role will be responsible for supervising day-to-day production activities, ensuring fabrication work is delivered safely, efficiently, to the required quality standards, and within allocated budgets. The successful candidate will work closely with Production Supervisors and cross-functional teams including Quality, Design, Project Management and Procurement.<br>Key Responsibilities Supervise production and fabrication activities to ensure output meets quality, cost and programme requirements. Control material wastage, man-hours and consumable usage against budget. Allocate manpower, machinery and other production resources effectively. Set daily production targets and monitor progress against the fabrication schedule. Coordinate with Quality Control, Design, Project Management and Procurement teams to resolve production issues. Review work orders, technical documentation and drawings before allocating work to supervisors. Ensure accurate production records, reports and documentation are maintained. Monitor attendance and timesheets for production teams. Ensure compliance with relevant safety, quality and environmental procedures. Support continuous improvement across production activities. Requirements BSc in Mechanical Engineering or a related discipline, or a Diploma in Mechanical Engineering. Approximately 5–7 years of relevant experience in Process or Static Equipment Fabrication. Candidates with a BSc should ideally have at least 5 years' fabrication-industry experience. Candidates with a Diploma should have approximately 8 years' fabrication-industry experience. Strong experience working within a manufacturing or fabrication environment. Good understanding of production planning, manpower allocation, quality and cost control. Strong coordination and supervisory skills.
Role Summary: The Mechanical Quality Engineer (Piping, Welding, Coating & NDT) is responsible for assuring and controlling the quality of piping fabrication and installation, welded joints, protective coating systems, and non-destructive testing activities for the JESCO / Arcelor Mittal Tubular Products Al-Jubail Heat Treatment and Finishing Line Project. The role provides owner-side surveillance of EPC contractors, subcontractors, vendors, and third-party inspection agencies from material receipt and fabrication through erection, testing, pre-commissioning, turnover, and final dossier close-out. The incumbent ensures compliance with approved project specifications, drawings, Inspection and Test Plans, welding and coating procedures, applicable Saudi requirements, and relevant ASME, API, ASTM, AWS, ISO, SSPC/AMPP, and ASNT standards.<br>Job Duties & Responsibilities:Review and approve contractor quality documents, including Project Quality Plans, Inspection and Test Plans, method statements, field inspection checklists, welding procedure specifications and qualification records, NDT procedures, coating procedures, pressure-test packages, and turnover dossiers. Perform surveillance and inspection of shop and field piping activities, including material receiving, identification and traceability, storage and preservation, fit-up, joint preparation, welding, supports, flange alignment, bolt tightening, cleanliness, reinstatement, and system completion. Verify piping materials, fittings, flanges, valves, gaskets, welding consumables, and coating materials against approved drawings, specifications, purchase orders, material requisitions, MTCs, heat numbers, and positive material identification requirements. Witness and verify welder and welding-operator qualifications, WPS/PQR compliance, welding consumable control, preheat and inter pass temperature, heat input, joint sequencing, visual inspection, weld repair, and post-weld heat treatment activities where applicable. Coordinate and monitor NDT activities, including VT, PT, MT, UT, RT, and advanced methods when specified; verify technician certification, equipment calibration, technique sheets, examination coverage, acceptance criteria, reports, film or digital-image quality, and repair-cycle closure. Inspect surface preparation and coating application, including environmental conditions, abrasive and coating batch control, surface cleanliness and profile, stripe coating, wet and dry film thickness, holiday testing, adhesion testing, curing, repair, and final acceptance in accordance with the approved coating system. Witness piping pressure and leak testing, line flushing or blowing, drying, chemical cleaning where applicable, valve testing, punch-list clearance, and reinstatement; confirm calibrated test instruments, test boundaries, temporary supports, safety controls, and complete test records. Review isometric drawings, P&IDs, line lists, plot plans, weld maps, spool drawings, support details, vendor drawings, specifications, and approved technical queries to confirm construction and inspection compliance. Raise inspection observations and Non-Conformance Reports for deviations; support root-cause analysis, corrective and preventive actions, concession or repair review, verification of implementation, and timely close-out. Maintain inspection status, weld and NDT traceability, coating records, NCR and punch-list logs, quality KPIs, and weekly progress reports; identify recurring defects and recommend preventive improvement actions. Coordinate with Project Management, Engineering, Construction, HSE, Operations, EPC contractors, vendors, authorized inspectors, and third-party agencies to resolve quality issues without compromising safety, code compliance, or project schedule. Support mechanical completion, system handover, pre-commissioning, and final quality dossier review, ensuring all records are complete, legible, traceable, approved, and aligned with the project turnover index.<br>Education & Experience:Bachelor’s degree in mechanical engineering or equivalent discipline Minimum 8-10 years of QA/QC experience in piping, welding, coating, and NDT for industrial construction, steel, oil and gas, petrochemical, power, or process-plant projects. At least 3 years in an owner, client, PMC, or lead site-quality role supervising EPC contractors, subcontractors, and third-party inspection agencies. Demonstrated field experience with carbon steel, stainless steel, and alloy-steel piping fabrication and installation, welding control, NDT coordination, coating inspection, pressure testing, and turnover documentation. Experience reviewing and implementing ITPs, WPS/PQRs, welder qualifications, NDT procedures, coating procedures, inspection requests, test packs, NCRs, punch lists, and final manufacturing or construction dossiers. Experience on Heat Treatment and Finishing Line, steelmaking, pipe manufacturing, or comparable heavy-industrial projects is preferred; Saudi Arabia or GCC project experience is an advantage.<br>Skills:Excellent technical knowledge and quality-control skills Strong leadership and contractor-management abilities Effective communication, reporting, and coordination skills Strong analytical, problem-solving, and decision-making abilities Good planning, organization, teamwork, and time-management skills
Description<br><br>Tuwaiq Casting & Forging is seeking a detail-oriented and experienced QC Engineer to join the Quality Control Division. Reporting to the QC Manager, this role is responsible for ensuring that all casting and forging products meet internal quality standards and customer specifications through the implementation and maintenance of effective quality control processes. The QC Engineer plays a critical role in minimising defects, improving production efficiency, and ensuring compliance with applicable industry standards and certifications.<br><br>Quality Inspection & Control<br><br>Conduct inspections of castings and forgings in accordance with quality procedures and engineering drawings Drive the QC process across the casting shop in line with organisational procedures and expectations Control non-conforming products within the plant in accordance with the NCR procedure, including internal NCR management Prepare casting Inspection and Test Plans (ITPs) and product inspection plans for both internal and external requirements to ensure product quality Perform quality inspections on raw materials, in-process components, and finished products Record inspection results and analyse quality data to identify trends and issues Manage day-to-day inspection activities on the casting shop floor Liaise with third-party inspection agencies for inspections and related activities Ensure final product clearance in accordance with quality requirements.<br><br>Problem Solving & Continuous Improvement<br><br>Coordinate with the team on root cause analysis, corrective actions, and preventive actions Provide quality feedback to support the improvement of production processes.<br><br>Quality System Management<br><br>Maintain and improve quality management systems including ISO 9001 and API Q1Manage customer and third-party audits in coordination with the QA function.<br><br>Inspection Equipment Management<br><br>Manage calibration and maintenance of all inspection equipment Operate equipment to ensure measurement accuracy.<br><br>Requirements<br><br>Education<br><br>Bachelor's degree in Mechanical Engineering, Materials Science, Metallurgical Engineering, or a related field.<br><br>Experience<br><br>Minimum 5 years of experience in quality control within a manufacturing environment, preferably in the casting or forging industry Experience with API Q1, API 20A, and API 20B standards is essential.<br><br>Technical Skills<br><br>Proficiency in using inspection tools including calipers, micrometers, CMM, and ultrasonic testers Familiarity with quality inspection methods including visual inspection and NDEUnderstanding of metallurgical properties and heat treatment processes Exposure to ASTM, EN, API Q1, API 20A, and API 20B standards related to the casting and forging industry.<br><br>Certifications<br><br>NDE certification to ASNT or ISO 9712 Level IIQMS Internal Auditor certification.<br><br>Behavioral Competencies<br><br>Strong analytical thinking and problem-solving ability High attention to detail Effective communication skills.
QC INSPECTOR – PIPING & WELDING<br>We are seeking experienced QC Inspectors – Piping & Welding to join our project in KSA.<br>Key Responsibilities<br>Perform quality control inspections for piping installation, fabrication, welding, and related activities in accordance with project specifications, Saudi Aramco standards, and applicable international codes. Inspect piping materials, fabrication, installation, welding, and testing activities to ensure compliance with approved procedures and quality requirements. Conduct visual inspections and witness hydrostatic, pneumatic, welding, and other required tests. Review drawings, Inspection and Test Plans (ITPs), method statements, welding procedures, and quality documentation. Ensure compliance with applicable codes and standards, including ASME B31.3, ASME B31.4, ASME B31.8, ASME Section V & IX, API 620, API 650, and AWS D1.1. Conduct and review welding inspection activities in accordance with applicable certification requirements. Review and verify Non-Destructive Testing (NDT) programs, procedures, and inspection results. Perform, review, or ensure VT, MT, PT, RT, and UT inspections as applicable, with valid certification in the relevant method(s). Hold ASNT Level II certification in the relevant NDT method(s) when performing, reviewing, or ensuring NDT activities. Perform or review Radiographic Testing Film Interpretation (RTFI) when required, with valid RTFI certification. Prepare and maintain inspection reports, quality records, and related documentation. Coordinate with construction, engineering, and client representatives to resolve quality-related issues and ensure compliance with project quality requirements. Ensure compliance with applicable Saudi Aramco Engineering Procedures, standards, and project quality requirements.<br>Requirements<br>Diploma or bachelor’s degree in mechanical engineering.8–10 years of experience as a QC Inspector in Piping and/or Welding. Proven experience in Oil & Gas projects/fields. For Welding Inspectors: valid AWS CWI, CSWIP 3.1, or COMPANY-approved equivalent certification. For Welding Inspectors: valid ASNT Level II certification in relevant NDT method(s), where applicable. Valid certification for relevant VT, MT, PT, RT, UT, and RTFI activities, where applicable. Ex-Saudi Aramco approved candidates with a valid SAP Number are highly preferred. Candidates with Saudi Aramco approval should provide their SAP Number and approval copy. Strong knowledge of Saudi Aramco standards, specifications, applicable codes, and quality requirements.
The ideal candidate will own the entire production process. They will strategize with other internal teams to ensure operational excellence. The will also run quality assessment to ensure customer satisfaction.<br>Responsibilities Manage and evaluate entire production process Contribute to production planning and budgeting Lead and monitor quality assessments to ensure customer satisfaction Maintain a safe production environment Coordinate with key internal and external production stakeholders Communicate with department managers to define business strategy and required goals. Estimating costs and preparing budgets for the production process. Organizing workflow to meet required specifications and supervising setting deadlines for delivery. Production control and problem solving in the production process. Supervising the performance of production staff and all workers in the production department. Determine the necessary resources such as the volume of labor, raw materials and all requirements of the production process. Supervising the maintenance work and purchasing the equipment required to operate the department. Monitoring and ensuring the production of products that meet quality standards. Supervising the implementation of occupational health and safety precautions. Preparing periodic reports and submitting them to senior management.<br><br>Qualifications<br>Education: Bachelor of Mechanical Engineering. Specialized knowledge: Deep knowledge of production management Skills: Excellent organizational and leaderships skills. MS-Office proficiency Abilities: Teamwork, taking new assignments etc. Other characteristics such as personal characteristics: Discipline, Punctuality, Hardworking, committed to work etc. Professional Certification: Experience: 5-8 Years
Company Description Al Khazama Co LTD specializes in quality control and inspection services that ensure projects meet stringent standards of safety, efficiency, and durability. The company leverages advanced technologies and proven methodologies to deliver precise evaluations across a range of industrial and mechanical projects. By helping clients mitigate risks and maintain regulatory and technical compliance, Al Khazama supports successful project outcomes from planning through completion. Team members work in a professional environment focused on accuracy, reliability, and continuous improvement in quality assurance.<br>Role Description The Mechanical Welding QC role is a full-time, on-site position based in Al Khobar. The individual in this role will perform daily inspections of welded and mechanical components, verifying compliance with project specifications, safety standards, and applicable codes. Responsibilities include reviewing drawings and welding procedures, conducting visual and dimensional checks, documenting findings, and preparing inspection reports. The role also involves coordinating with engineers, supervisors, and welders to resolve nonconformities, recommending corrective actions, and supporting ongoing maintenance and quality improvement activities. The Mechanical Welding QC will help ensure that all welding and mechanical work is executed safely, efficiently, and in line with company and client requirements.<br><br>Qualifications Must have Aramco CBT qualification in mechanical and welding. Must have Saudi market experience Hands-on experience with Inspection activities for mechanical and welded components, including visual, dimensional, and quality checks. Familiarity with relevant quality, safety, and regulatory standards (e.g., welding codes, inspection procedures). Strong attention to detail, documentation skills, and ability to prepare clear inspection reports. Effective communication and teamwork skills, with the ability to collaborate with cross-functional site personnel. Technical diploma or degree in Mechanical Engineering or a related field; welding or QC certifications are a plus. Ability to work on-site across the kingdom and perform physical inspection tasks in industrial environments.immadiate joining is preferred
Job Description<br><br>Job Summary**<br><br>Responsible for the maintenance, repair, and optimal performance of can decoration equipment to ensure efficient production and high-quality printed cans.<br><br>Job Responsibilities**<br><br> Perform preventative maintenance on can decoration machinery, including presses, coaters, and ovens. Diagnose and troubleshoot mechanical, electrical, and pneumatic issues affecting can decorators. Execute repairs and replacements of faulty components, such as gears, bearings, cylinders, and electrical controls. Conduct equipment changeovers and adjustments for different can sizes and print designs. Monitor equipment during operation to identify potential problems and ensure adherence to production specifications. Collaborate with production operators to optimize machine performance and minimize downtime. Document maintenance activities, repairs, and parts usage accurately. Adhere to all safety procedures and company policies during maintenance and repair operations. Participate in continuous improvement initiatives related to equipment reliability and efficiency.<br><br>Job Qualifications**<br><br> High school diploma or equivalent; vocational training or technical degree in mechanics, electrical, or a related field is highly preferred. Proven experience as a mechanic, preferably within a manufacturing environment, with specific experience in decorating or printing equipment being a significant advantage. Strong mechanical aptitude and troubleshooting skills. Ability to read and interpret technical manuals, schematics, and blueprints. Familiarity with pneumatic and hydraulic systems. Basic understanding of electrical systems and controls. Ability to work independently and as part of a team. Good communication skills. Physical ability to lift heavy objects, stand for extended periods, and work in a manufacturing environment.
Salama Engineering Industries is looking for an experienced Quality Assurance Manager to lead the Quality function for our Process Equipment Division (PED) in Dammam. The ideal candidate must have strong hands-on experience in pressure vessel and shell & tube heat exchanger fabrication, with a proven background in Oil & Gas and petrochemical manufacturing. The role will be responsible for ensuring that all engineering, fabrication, welding, inspection, testing and final documentation activities comply with applicable ASME, API, ISO 9001 and customer requirements.<br>Key Responsibilities<br>Lead and manage the QA/QC function for the PED manufacturing and fabrication facility. Develop, implement and maintain the ISO 9001 Quality Management System. Ensure compliance with ASME Section VIII Division 1 & 2, ASME Section IX, ASME Section II, API and applicable TEMA requirements. Oversee quality activities for pressure vessels, shell & tube heat exchangers and other static/process equipment. Review and approve Quality Plans, ITPs, QCPs, inspection procedures, WPS/PQR/WPQ and quality documentation. Ensure quality control from raw material receiving through fabrication, fit-up, welding, NDT, PWHT, hydrotesting, final inspection and dispatch. Ensure compliance of welding and fabrication activities with approved procedures and applicable codes. Coordinate with ASME Authorized Inspectors, third-party inspection agencies, clients and EPC contractors. Manage NCRs, corrective actions, root-cause analysis and preventive actions. Conduct internal, external and customer audits and ensure timely closure of findings. Review MTCs, NDT reports, welding records, inspection reports and final manufacturing/quality dossiers. Establish and monitor quality KPIs, identify recurring quality issues and implement continuous improvement initiatives. Lead and develop the QA/QC team, including QA/QC Engineers, Inspectors and NDT personnel. Support management in maintaining and improving the company's quality standards and customer satisfaction.<br>Mandatory Qualifications & Experience<br>Bachelor's Degree in Mechanical Engineering or equivalent. Minimum 15 years of QA/QC experience in Oil & Gas / Petrochemical fabrication. Mandatory experience in pressure vessel and heat exchanger fabrication. Strong experience with ASME Section VIII Division 1 & 2. Strong knowledge of ASME Section IX, ASME Section II and applicable API/TEMA requirements. Proven experience in welding, NDT, fabrication inspection and pressure testing. Strong knowledge of ISO 9001 Quality Management Systems. ISO 9001 certification – Mandatory. ASQ Certified Manager of Quality/Organizational Excellence (CMQ/OE) – Mandatory. Experience dealing with ASME Authorized Inspectors, third-party inspectors and Oil & Gas clients.
MEP Engineer – Facilities Management Advisory Location: King Salman Energy Park (SPARK), Eastern Province, Saudi Arabia Employment Type: Full-time<br>Position Summary King Salman Energy Park (SPARK) is a premier industrial ecosystem supporting the region’s energy and manufacturing sectors. As part of SPARK’s commitment to operational excellence and sustainable infrastructure, the MEP Engineer plays a key role in ensuring the reliability, efficiency, and compliance of mechanical, electrical, and plumbing systems across the park. This position will support the inspection, maintenance, and performance optimization of MEP systems within both building and infrastructure assets, including tenant facilities, substations, pumping stations, utility corridors, and common areas. The MEP Engineer will work closely with senior engineers, FM teams, and service providers to maintain high operational standards and system integrity.<br>Key Responsibilities1. MEP Systems Support (Infrastructure & Building Assets) Monitor the performance and operational status of MEP systems including HVAC, water supply, drainage, fire protection, lighting, power distribution, and pumping stations. Conduct site inspections and support maintenance activities for MEP systems across both infrastructure and building facilities. Participate in the troubleshooting, fault analysis, and resolution of MEP-related technical issues. Support the review of method statements, risk assessments, and maintenance procedures submitted by contractors. Ensure building MEP systems are maintained according to required specifications, tenant guidelines, and health and safety standards. Support the technical review and commissioning of new MEP installations or refurbished systems.2. Preventive & Corrective Maintenance Coordination Assist in implementing preventive and corrective maintenance schedules for MEP systems in coordination with O&M contractors. Conduct field verification of maintenance activities to ensure alignment with SLAs and technical standards. Maintain records of completed works, service reports, and contractor performance. Monitor spare parts usage and support timely identification of required materials. Coordinate with FM teams to minimize downtime and ensure timely resolution of urgent issues.3. Utilities Performance Monitoring Assist in tracking consumption data for utilities such as electricity, water, and chilled water across MEP systems. Identify abnormal usage trends and report potential inefficiencies or faults. Support the implementation of energy efficiency measures and corrective actions. Work with sustainability teams to improve performance through data-driven insights and technical adjustments.4. Compliance & Safety Ensure all MEP activities are performed in compliance with local regulations, SPARK standards, and international codes (e.g., SBC, ASHRAE, NFPA, NEC, IEC). Participate in safety inspections and enforce compliance with HSE protocols during site activities. Assist with documentation and audits related to safety and regulatory compliance.5. Contractor & Vendor Coordination Liaise with external contractors and vendors to support ongoing MEP maintenance works and service delivery. Monitor contractor performance and ensure compliance with contractual obligations, timelines, and quality expectations. Provide site-level coordination during minor works, equipment replacements, and system upgrades.6. Technical Documentation & Reporting Maintain up-to-date MEP documentation, including drawings, asset registers, test reports, and maintenance logs. Assist in preparing technical reports, condition assessments, and recommendations for system improvements. Support the integration of MEP asset data into CAFM/CMMS platforms for centralized monitoring and tracking.<br>Qualifications & Experience Bachelor’s degree in Mechanical or Electrical Engineering (or related field).4–7 years of experience in MEP operations, maintenance, or technical support—preferably in industrial parks, large-scale developments, or infrastructure projects. Strong knowledge of MEP systems for both buildings and infrastructure (e.g., utility corridors, substations, pump stations). Familiarity with international and local codes and standards (SBC, ASHRAE, NFPA, NEC, IEC). Experience using CAFM/CMMS platforms for asset and work order management is preferred. Previous experience in the GCC region is an advantage.<br>Key Skills & Attributes Technical Proficiency: Solid understanding of MEP systems, their operation, and typical fault conditions. Problem Solving: Able to respond to system failures and maintenance issues quickly and efficiently. Attention to Detail: Strong focus on system compliance, documentation accuracy, and service quality. Teamwork: Able to collaborate with internal teams, contractors, and stakeholders to support joint goals. Communication: Clear reporting and coordination with field teams, vendors, and engineering supervisors. Safety Awareness: Strong commitment to HSE and regulatory compliance during operations and inspections.<br>Reporting Line Reports To:Senior MEP Engineer<br>Collaborates With Internal Stakeholders:Facilities Management Utilities and Sustainability Teams Engineering and Projects HSE and Compliance Procurement and Vendor Management External Stakeholders:O&M contractors and service providers Engineering consultants Utility suppliers Regulatory bodies (for inspections and compliance matters)<br>All interested applicants can also email their CVs to careers.escl@dhowsolutions.com with a subject line of “MEP Engineer-Saudi National” mentioning their availability.
Welding Engineer – Production Location: Saudi Arabia Industry: Manufacturing / Steel Fabrication / Engineering<br>We are currently supporting a well-established engineering and manufacturing organization in Saudi Arabia with the appointment of a Welding Engineer – Production.<br>This role will be responsible for maintaining welding quality across production projects, ensuring welding procedures, consumables, equipment and documentation meet applicable codes, project requirements and delivery schedules.<br>Key Responsibilities Prepare Weld Maps and Welding Procedure Specifications (WPS) and coordinate Procedure Qualification Records (PQR). Liaise with clients to obtain WPS approvals and ensure compliance with project-specific requirements. Supervise welding of test coupons in accordance with applicable codes and standards. Verify calibration and readiness of welding equipment. Monitor the correct use of welding consumables including electrodes, wire and flux. Verify welder qualifications and approval status before assignment to projects. Raise Non-Conformance Reports (NCRs) for welding-related non-compliance identified on the shop floor. Review and accept Non-Destructive Examination (NDE) reports before client submission. Review welding records and supplier documentation for compliance with project and industry standards. Maintain accurate welding documentation and prepare required production/manpower reports. Ensure compliance with safety, quality and environmental procedures.<br>Requirements Bachelor’s Degree or Diploma in Engineering, preferably Mechanical Engineering. A recognised welding certification such as CSWIP or CWI. Minimum 2–3 years' experience within a production environment. Strong knowledge of WPS, PQR, weld maps, welder qualification and welding codes/standards. Experience reviewing NDE/NDT reports and welding quality documentation. Ability to coordinate effectively with clients, QA/QC teams, project teams, vendors and third-party inspectors.<br>Interested? If you have experience in welding engineering, fabrication, production and QA/QC and hold a recognized CSWIP or CWI certification, we would like to hear from you.
JOB PURPOSE:The Unit Head of Total Productive Maintenance (TPM) in the ferrous and non-ferrous recycling industry oversees all plant machinery, heavy equipment reliability, and operational efficiency. This executive role blends heavy industrial operations management with continuous improvement methodologies, optimizing shredders, balers, and sorting systems while ensuring zero accidents and zero equipment breakdowns.<br>KEY ACCOUNTABILITIES/RESPONSIBILITIES:1. Strategic Equipment & TPM Leadership:• Autonomous Maintenance: Empower operators to perform basic daily equipment upkeep (cleaning, lubricating, inspecting) on heavy machinery.• Equipment Reliability: Minimize costly downtime of critical assets, including industrial shredders, eddy currents, optical sorters, shears, and balers.• Root Cause Analysis (RCA): Lead RCA protocols for chronic equipment failures to implement permanent engineering solutions.2. Operations & Production Management:• Process Optimization: Oversee the inbound processing, sorting, grading, and shredding flows for both ferrous (iron/steel) and non-ferrous (copper, aluminum, stainless) metals.• KPI: Report metrics like Overall Equipment Effectiveness (OEE), Total Effective Equipment Performance. (TEEP)• Resource Allocation: Oversee workforce schedules and cross-functional teams across multiple departments (e.g., non-ferrous recovery plants).3. Quality Control & Inventory:• Grading & Segregation: Ensure strict quality control for metal purity levels to meet mill specifications and global market standards.• Inventory Control: Manage raw scrap intake, Work-In-Progress (WIP), and outbound shipments of processed commodities.4. Safety & Environmental Compliance:• OSHA/HSE Standards: Enforce rigorous safety regulations relevant to heavy scrap yards (e.g., traffic management, molten metal protocols, radiation checks).• Housekeeping: Champion 5S workplace organization methodologies.• Environmental Permits: Ensure strict compliance with local and federal environmental laws regarding hazardous and non-hazardous scrap management.<br>JOB CONTEXT:1- Utilization of the Total Productive Maintenance (TPM) as their primary management framework.2- Eliminating the "Six Big Losses" (breakdowns, setup time, minor stops, speed loss, defects, and startup losses).<br>Qualification:Bachelor’s degree in Mechanical/Electrical Engineering, Metallurgy, or Industrial Management.<br>Experience:7-10+ years of progressive leadership experience in heavy manufacturing, metals processing, or a scrap recycling environment.<br>Skill & Competencies:• TPM/Lean Certification: Strong background in implementing TPM, Six Sigma, or Lean Manufacturing concepts in a plant setting.• Technical Aptitude: Comprehensive understanding of industrial hydraulic systems, conveyor belts, magnetic separators, and shredder wear parts.• Soft Skills: Exceptional change-management, analytical, and cross-functional leadership capabilities.
Receive email alerts for jobs
You can cancel your email alert at anytime