Jobs For Faculty Of Engineering Graduates - Eastern Province Saudi
1239 Jobs Found
Save and set alert for similar positionsManage alerts
<p>Supervise structural construction activities on-site and ensure compliance with approved drawings, specifications, and project requirements.</p><ul><li><p>Monitor the execution of reinforced concrete, structural steel, foundations, slabs, columns, beams, walls, and other structural works.</p></li><li><p>Inspect completed works and ensure that construction activities meet the required quality standards.</p></li><li><p>Review structural shop drawings, method statements, material submittments, and technical documents.</p></li><li><p>Coordinate with the Contractor to resolve technical and construction-related issues.</p></li><li><p>Review and respond to RFIs, technical queries, and structural site issues.</p></li><li><p>Verify that construction works are executed in accordance with approved materials, drawings, specifications, and applicable standards.</p></li><li><p>Monitor the progress of structural works and report any delays, non-conformities, or technical concerns to the Resident Engineer/Project Manager.</p></li><li><p>Coordinate with architectural, civil, MEP, and other disciplines to resolve site interface issues.</p></li><li><p>Conduct regular site inspections and prepare inspection reports and technical recommendations.</p></li><li><p>Identify defective or non-compliant works and follow up on corrective actions.</p></li><li><p>Participate in site meetings and technical coordination meetings with the Contractor and Client.</p></li><li><p>Provide technical support and professional recommendations to the Consultantu2019s supervision team.</p></li><li><p>Ensure that structural works are completed safely, efficiently, and in accordance with the project schedule.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bacheloru2019s degree in <b>Civil Engineering or Structural Engineering</b>.</li><li><p><b>7–8 years of relevant professional experience in structural engineering and construction</b>.</p></li><li><p>Minimum <b>3 years of experience in Saudi Arabia</b>.</p></li><li><p>Minimum <b>2 years of experience with an Engineering Consultancy</b>.</p></li><li><p>Strong experience in <b>structural site supervision and construction</b>.</p></li><li><p>Proven experience supervising reinforced concrete and structural construction works.</p></li><li><p>Good knowledge of structural drawings, specifications, construction methods, and quality requirements.</p></li><li><p>Experience working from the <b>Consultantu2019s side is highly preferred</b>.</p></li><li><p>Strong communication, coordination, inspection, and problem-solving skills.</p></li><li><p>Good command of <b>English, both written and spoken</b>.</p></li><li><p>Candidates currently located in Saudi Arabia (Must).</p></li><li><p><b>Must be available to join immediately</b>.</p></li></ul>
We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.<br><br><strong>Job Duties<br><br></strong>Under direct supervision:<br><br><ul><li>Provides technical and operational expertise to external customer in a professional manner.</li><li>This is the entry level position for this discipline.</li><li> Performs assignments requiring knowledge and application of basic engineering principles.</li><li> Assists in the delivery of Completion, Products & Services (CPS) services.</li><li> Assists in pre- planning, job execution, and post job analysis to ensure project success and efficiency.</li><li> Participates in developmental programs to accelerate learning and to increase abilities relative to the successful implementation of PSL objectives.</li><li>Requires the ability to analyze well site data in real time, using complex technologies such as software simulators and the latest electrical and mechanical equipment.<br><br></li></ul><strong>Qualifications<br><br></strong><ul><li>Undergraduate degree required – acceptable degrees are: All engineering, Engineering Technology, Geology, Mathematics, Physics, & Chemistry.<br><br></li></ul><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.<br><br><strong>Location<br><br></strong>Jubail Highway Abu Hadria Exit, Al-Khobar, Al Khobar, 31952, Saudi Arabia<br><br><strong>Job Details<br><br></strong><strong>Requisition Number:</strong> 211729<br><br><strong>Experience Level: </strong>Entry-Level<br><br><strong>Job Family:</strong> Engineering/Science/Technology<br><br><strong>Product Service Line: </strong>Completion Tools<br><br><strong>Full Time / Part Time: </strong>Full Time<br><br><strong>Additional Locations for this position: <br><br></strong><strong>Compensation Information<br><br></strong>Compensation is competitive and commensurate with experience.
<strong>Title:<br><br></strong>Lead Flow Assurance Engineer<br><br><strong>Overall Summary<br><br></strong>Lead Flow Assurance Engineer with proven experience in the design of pipelines, utilities and offsite piping system /pipeline from conceptual stage through detailed design of medium to large size projects. Thorough knowledge of projects/process & flow assurance engineering practices, economics principles, calculation methods, international standards, codes, specifications, and procedures. Minimum 15 years’ experience in Oil & Gas, Hydrocarbons, and/or Infrastructure industries. Excellent communication skills required.<br><br><strong>Responsibilities:<br><br></strong>Has demonstrated experience in pipeline flow assurance and hydraulic calculations. Has been working as a pipeline simulation engineer. Knowledge of project engineering practices, international codes, standards, procedures, and specifications.<br><br><ul><li>Good Experience in steady-state and transient hydraulic analyses using industry standard software like SPS, PIPENET and PIPESIM.</li><li>Have the capability to use other Process tools like HYSYS, PVTSIM, and Multiflash.</li><li>Review and approve process deliverables (PFDs, P&IDs, Design Basis, Process Narratives, Process Calculations, Equipment Specification documents, etc)</li><li>Experience in performing surge analysis on liquid lines using simulation tools like SPS.</li><li>Have full capability to design surge protection systems.</li><li>Have full capability to of simulating gas networks.</li><li>Must be able to demonstrate experience in single and multiphase pipelines hydraulic simulation.</li><li>Familiar with applicable regulations, codes and standards.</li><li>GCC experience particularly Saudi Aramco experience will be preferred.</li><li>Work independently and create a positive work environment.</li><li>Experience with firewater demand calculations and equipment requirements, industrial drainage design and equipment, familiarity with the associated Saudi Aramco standards and NFPA requirements are desirable.</li><li>Provide technical leadership to ensure that applicable procedures and standards (client, KBR and international) are correctly applied.</li><li>Must be proficient in English, oral and written.</li><li>Excellent technical presentation skills required.<br><br></li></ul><strong>Qualifications & Years Of Experience:<br><br></strong><ul><li>Bachelor's degree in chemical engineering</li><li>15 years’ experience in process and flow assurance.</li><li>Candidates must hold an Engineering Degree Qualification or equivalent from a government recognized institution.</li></ul>
<p><strong>Qualifications</strong></p><ul><li>Two-year associate technical degree in a relevant field.</li><li>Minimum 3 years of experience across phases of chemical or petrochemical projects.</li><li>Certificates or credentials in office-based systems.</li><li>Administration experience leading office admin activities in a fast paced department.</li><li>Experience of document control procedures and activities.</li><li>Very organized, proactive and willing to keep the department organized.</li></ul><p><br></p><p><strong>Key Responsibilities</strong></p><ul><li>Office administration activities for a dept of approx. 20 persons – Proactive, organizing dept admin, maintaining the office flow.</li><li>Maintaining and organizing the temporary office location at Sadara or at a contractor office.</li><li>Ensuring smooth onboarding of new employees with initial activities.</li><li>Raising small purchase orders for equipment, PPE, etc.</li><li>Issuing formal communications to contractors.</li><li>Organizing logistics for the department, such as transportations, meetings conference rooms.</li><li>Organizing recognition events, lunches etc.</li><li>Back-up cover for a dept document control technician.</li><li>Maintain professional and technical knowledge through workshops, publications, professional networks, and technical societies.</li><li>Assist in organising training sessions for operators, engineers, and technicians.</li><li>Provide second-line application support, identify root causes, troubleshoot issues, and restore proper operation.</li><li>Escalate unresolved application issues to the appropriate solution provider.</li><li>Provide Project, MOC, and Work Order support and technical assistance within the Engineering System Design Environment.</li><li>Maintain document, data, and deliverable-format standards with discipline SMEs and ensure requirements are included in documents for internal and external engineering work.</li><li>Coordinate with IT to improve engineering-application performance and maintain compatibility with the corporate software and hardware infrastructure.</li><li>Provide engineering-system access in accordance with intellectual-property requirements.</li><li>Ensure compliance with EH&S guidelines, regulatory requirements, and permit requirements.</li><li>Matching of department work hours will be required, requiring some overtime in the role.</li><li>Perform other job-related activities requested by the immediate supervisor or manager.</li></ul><p><br></p>
<p><strong>Department Administrator</strong></p><p><br></p><p><strong>Qualifications</strong></p><p><br></p><ul><li>Minimum 3 years of experience across phases of chemical or petrochemical projects.</li><li>Two-year associate technical degree in a relevant field.</li><li>Certificates or credentials in office-based systems.</li><li>Administration experience leading office admin activities in a fast-paced department.</li><li>Experience of document control procedures and activities.</li><li>Very organized, proactive and willing to keep the department organized.</li></ul><p><br></p><p><strong>Key Responsibilities</strong></p><p><br></p><ul><li>Office administration activities for a dept. of approx. 20 persons – Proactive, organizing dept admin, maintaining the office flow.</li><li>Maintaining and organizing the temporary office location at Sadara or at a contractor office.</li><li>Ensuring smooth onboarding of new employees with initial activities.</li><li>Raising small purchase orders for equipment, PPE, etc.</li><li>Issuing formal communications to contractors.</li><li>Organizing logistics for the department, such as transportations, meetings conference rooms.</li><li>Organizing recognition events, lunches etc.</li><li>Back-up cover for a dept document control technician.</li><li>Maintain professional and technical knowledge through workshops, publications, professional networks, and technical societies.</li><li>Assist in organizing training sessions for operators, engineers, and technicians.</li><li>Provide second-line application support, identify root causes, troubleshoot issues, and restore proper operation.</li><li>Escalate unresolved application issues to the appropriate solution provider.</li><li>Provide Project, MOC, and Work Order support and technical assistance within the Engineering System Design Environment.</li><li>Maintain document, data, and deliverable-format standards with discipline SMEs and ensure requirements are included in documents for internal and external engineering work.</li><li>Coordinate with IT to improve engineering-application performance and maintain compatibility with the corporate software and hardware infrastructure.</li><li>Provide engineering-system access in accordance with intellectual-property requirements.</li><li>Ensure compliance with EH&S guidelines, regulatory requirements, and permit requirements.</li><li>Matching of department work hours will be required, requiring some overtime in the role.</li><li>Perform other job-related activities requested by the immediate supervisor or manager.</li></ul><p><br></p>
<h3>About Worley</h3><p>Worley is a global company specializing in energy, chemicals, and resources, headquartered in Australia. The company partners with customers to deliver projects and create value across the lifecycle of their assets. Worley provides consulting, engineering, procurement, and construction services, extending through operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, Worley supports customers in navigating complexity to meet current needs and transition to more sustainable solutions.</p><h3>The Role of Lead Materials / Corrosion Engineer</h3><p>Worley is seeking a <strong>Lead Materials / Corrosion Engineer</strong> to join its team in Al Khobar, Eastern region. This full-time position is responsible for consultancy and engineering activities related to corrosion management and materials integrity within various projects.</p><h3>Key Responsibilities</h3><ul><li>Participate under Principal / Lead Engineer supervision to create and develop Corrosion Management Programs.</li><li>Specify and identify corrosion loops and potential corrosion mechanisms.</li><li>Create and develop corrosion control strategies covering various corrosion mitigation methodologies.</li><li>Apply RBI assessment methodology.</li><li>Prepare and issue engineering corrosion philosophies, material selection reports, and perform corrosion rate calculations.</li><li>Create and develop material selection diagrams.</li><li>Advise on equipment, valves, and piping material selection based on internal and external corrosion considerations.</li><li>Provide authoritative technical assessment and interpretation of corrosion aspects.</li><li>Support cost-effective material selection for Company engineering projects during the design phase.</li><li>Prepare coating specifications and insulation specifications.</li><li>Ensure all produced deliverables comply with the Company's QA/QC and ISO System requirements.</li><li>Carry out, review, approve, and/or supervise work using Company and Client design methods, standards, and data, ensuring high quality and adherence to Project requirements.</li><li>Ensure compliance with Company and Client’s Health and Safety, Environmental, and Quality Management Procedures.</li></ul><h3>Work Environment</h3><p>This is a full-time position based in Al Khobar, Eastern region, contributing to Worley's global projects and customer partnerships.</p>
<p>We are seeking a Metallurgy Engineer to join our Mechanical Services Shops. Mechanical Services Shops is responsible for providing rotating and static equipment repair and fabrication of components.</p><p>Your primary role is to provide materials and metallurgical engineering support for component fabrication, repair, qualification, and failure prevention. You will establish material requirements, evaluate microstructure and properties, select processing routes, resolve degradation mechanisms, and ensure materials are fit for oil and gas service.</p><p><br></p><p><strong><u>Key Responsibilities</u></strong></p><p>As the successful candidate you will be required to perform the following:</p><p>· <strong>Material Selection & Specification:</strong> Select metals, alloys, heat treatments, coatings, and acceptance requirements based on strength, toughness, temperature, corrosion, wear, and manufacturability.</p><p>· <strong>Material Characterization:</strong> Plan and interpret metallography, microstructure, hardness, tensile, impact, fracture, corrosion, and coating examinations to confirm material condition.</p><p>· <strong>Fabrication & Repair Support:</strong> Provide metallurgical control for casting, forging, welding, cladding, additive manufacturing, machining, heat treatment, and repair qualification.</p><p>· <strong>Failure & Damage Analysis:</strong> Investigate cracking, corrosion, erosion, embrittlement, creep, fatigue, wear, overheating, and fabrication defects; identify root cause and recommend corrective action.</p><p>· <strong>Technical Governance:</strong> Develop material specifications and test plans, review certificates and deviations, qualify procedures, issue technical reports, and mentor personnel.</p><p><br></p><p><strong>Requirements</strong></p><ul><li>You will hold a Bachelor's degree in Metallurgical Engineering, Materials Engineering, or Materials Science from a recognized and approved program; a Master's degree or PhD is preferred.</li><li>You will have at least 15 years of metallurgical or materials-engineering experience, including a minimum of 8 years supporting industrial manufacturing, repair, or failure analysis.</li><li>Strong expertise in ferrous and nonferrous metallurgy, phase transformations, heat treatment, welding metallurgy, corrosion, fracture, fatigue, and wear is required.</li><li>Demonstrated experience with metallography, microstructure evaluation, material characterization, mechanical testing, and failure-analysis reporting is necessary.</li><li>Ability to translate service conditions and damage mechanisms into material, process, inspection, and acceptance requirements is required.</li><li>ASM professional materials credentials, AMPP/NACE corrosion training, or equivalent recognized certification is preferred.</li></ul>
<h3>About the Role</h3><p>KBR Saudi Arabia is seeking a <strong>Sr. Technical Professional-Pipeline</strong> to join their team in Al Khobar, Eastern Region. This full-time role involves comprehensive responsibilities related to pipeline study, design, and specification, contributing to critical infrastructure projects.</p><h3>Role Overview</h3><p>The Sr. Technical Professional will be responsible for all conventional aspects of pipeline engineering, while also devising new approaches to complex problems. The role requires independent judgment in evaluating, selecting, and adapting engineering techniques and criteria. This position involves conventional engineering practice, but may include features such as conflicting design requirements, material suitability challenges, and difficult coordination needs. The professional will also provide technical guidance to designers and less experienced engineers, with tasks indirectly impacting cost containment, efficiency, profitability, and operations.</p><h3>Key Responsibilities</h3><ul><li>Conduct studies, design, and specification for pipelines.</li><li>Manage services related to pipelines, including route selection and layout.</li><li>Oversee field surveys, material selection, coating systems, and cathodic protection.</li><li>Implement leak detection systems, and design valve, terminal, and pump stations.</li><li>Determine appropriate installation techniques.</li><li>Lead a functional area on small projects or a segment of larger projects.</li><li>Plan, budget, organize, coordinate, and control project activities.</li><li>Conduct employee performance appraisals.</li><li>Coach and develop lower-level professionals.</li></ul><h3>Qualifications and Experience</h3><ul><li>A minimum of 5 to 10 years of relevant experience in pipeline engineering.</li><li>Demonstrated ability to perform conventional aspects of the functional area.</li><li>Proven capacity to devise new approaches to encountered problems.</li><li>Experience in planning, scheduling, and conducting work requiring independent judgment.</li></ul><h3>Work Environment</h3><p>This is a full-time position based in Al Khobar, Saudi Arabia, within the Eastern Region. The role operates under general supervision, requiring a professional capable of independent work while also providing technical guidance to team members.</p>
<p>Provide on-site quality support to manufacturing operations, ensuring compliance with customer specifications, applicable standards, and internal quality requirements. The role is responsible for supporting product release activities, coordinating inspections, and verifying the effective implementation of quality control processes throughout the production line. Main Responsibilities</p>
<ul>
<li>Provide on-site quality support to production operations, ensuring products meet quality and customer requirements prior to release.</li>
<li>Prepare products, materials, and quality documentation for customer and third-party inspections.</li>
<li>Implement, monitor, and verify Quality Control Plans (QCPs) in accordance with applicable standards, customer specifications, and internal procedures.</li>
<li>Ensure production activities comply with quality requirements defined during customer pre-inspection meetings.</li>
<li>Perform inspections and review quality records to verify product conformity and traceability.</li>
<li>Support the investigation and resolution of quality deviations and non-conformities.</li>
<li>Work closely with Production, Operations, and Quality teams to maintain product quality and support continuous improvement initiatives.</li>
<li>Interface with customers, inspectors, and third-party representatives during inspection and release activities.</li>
</ul>
<p>Requirements</p>
<ul>
<li>Bachelor's degree in Mechanical Engineering, Metallurgical Engineering, Industrial Engineering, or a related engineering discipline.</li>
<li>Experience in Quality Control, Quality Assurance, or Manufacturing Quality within an industrial environment.</li>
<li>Experience in steel manufacturing is strongly preferred.</li>
<li>Experience in pipe manufacturing (seamless or welded pipes) is considered a significant advantage.</li>
<li>Knowledge of manufacturing processes, inspection techniques, quality control systems, and applicable industry standards.</li>
<li>Ability to read and interpret technical specifications, drawings, and quality documentation.</li>
<li>Professional proficiency in English, both written and spoken.</li>
<li>Strong communication, analytical, and problem-solving skills.</li>
</ul><p><strong>Desired Candidate Profile</strong></p><p>Preferred Candidate Profile We are seeking a hands-on quality professional with a strong manufacturing mindset and experience in industrial production environments. Candidates from steel, pipe, metals, heavy industry, or related manufacturing sectors are encouraged to apply. The position is open to both Saudi nationals and expatriates currently based in Saudi Arabia. If your experience and knowledge match our requirements, please apply</p>
<p>Analyzes and optimizes the Vessel Traffic Management and Information System (VTMIS) to enhance Maritime Safety and operational efficiency within the oil & gas sector. </p><p>Collaborates with stakeholders to understand user needs, translating them into system requirements.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor degree in System Engineering, Information Engineering, or related field VTMIS Certificates. </p>
<p>We are currently seeking qualified and experienced professionals for multiple opportunities within the <strong>Upstream & Drilling sector in Saudi Arabia</strong>.</p> <p>We are looking for talented individuals across various disciplines, including Engineering, Drilling, Exploration, Supply Chain, Project Management, Construction, Inspection, Field Compliance, Telecommunications, Instrumentation & Control, and IT Support.</p> <p>Candidates with relevant qualifications and experience in the Oil & Gas industry, particularly in Upstream and Drilling operations, are encouraged to apply.</p> <p> <strong>Interested candidates are invited to share their updated CVs, mentioning the relevant job title in their application.</strong> </p> <p> <strong>Open Positions:</strong> </p> <ol> <li>Lead Supply Chain Analyst</li> <li>Crane Operator</li> <li>Lead Scheduling Engineer</li> <li>Field Compliance Specialist</li> <li>Lead Drilling Engineer</li> <li>Engineering Specialist</li> <li>Supervisor Project Engineer</li> <li>Senior Engineering Consultant</li> <li>Lead Exploration Systems Analyst</li> <li>Lead Estimating Engineer</li> <li>Lead Field Compliance Coordinator</li> <li>Instrumentation & Control Engineer</li> <li>Lead Inspection Specialist</li> <li>Telecommunication Engineer</li> <li>Senior Construction Specialist</li> <li>Senior Assistant Engineer</li> <li>IT Support Assistant</li> </ol><p><strong>Desired Candidate Profile</strong></p><ul><li>Relevant educational qualifications and professional experience in the respective discipline.</li><li>Previous experience in the Oil & Gas / Upstream / Drilling industry is preferred.</li><li>Strong technical knowledge and relevant industry experience.</li><li>Ability to work in a challenging project environment.</li></ul>
<p><strong><u>Responsibilities:</u></strong></p><p><br></p><ul><li>Assist in the execution and maintenance of Material Requirements Planning (MRP) and Resource Requirements Planning (RRP) in Oracle Fusion, ensuring that demand requirements are properly reviewed and converted into required planning actions.</li><li>Maintain and update planning master data in Oracle Fusion, including item lead times, safety stock levels, and other planning parameters, to support accurate MRP outputs.</li><li>Review MRP exception messages, including reschedule-in, reschedule-out, cancellation, and past-due order recommendations, and coordinate required actions with the relevant stakeholders.</li><li>Coordinate with Production Supervisors and shop floor teams to support alignment between the Master Production Schedule (MPS), material availability, and actual capacity constraints.</li><li>Monitor planning and shop floor information available in MES or other systems, and escalate data gaps, inconsistencies, or recurring issues that may impact production planning accuracy.</li><li>Support cross-functional analysis of lead-time drivers by sharing planning data, shortage trends, and execution constraints, and escalate recurring issues to the Planning Manager.</li><li>Release inventory Purchase Requisitions (PRs) to Purchasing in line with approved planning requirements and material availability needs.</li><li>Coordinate inventory transfer requests between Business Units when usable inventory is identified, supporting improved stock utilization across the organization.</li><li>Coordinate with Sustaining Engineering and relevant teams to review possible alternatives for existing non-finished goods inventory, supporting inventory utilization and obsolescence reduction.</li><li>Support coordination between Engineering and Purchasing for sample procurement prior to full-scale purchasing, as required.</li><li>Monitor open purchase orders and follow up with Purchasing on urgent or critical requirements to support production schedules.</li><li>Maintain and update the Material Shortage Report (MSR) by coordinating with Purchasing, Production Planning, and Customer Service to provide visibility on shortages and recovery actions.</li><li>Provide planning input on shipment urgency and material availability to support shipment mode decisions by Customer Service and Purchasing.</li><li>Track and report inventory information, including inventory levels versus targets, inventory trends, slow-moving stock, and intercompany or BU supply requirements.</li><li>Participate in continuous improvement initiatives related to planning process efficiency, lead-time visibility, and inventory accuracy.</li><li>Prepare regular planning reports related to MRP execution, shortages, inventory status, schedule adherence, and planning risks for review by the Planning Manager.</li></ul><p><br></p><p><strong><u>Required Skills and Qualifications:</u></strong></p><p><br></p><ul><li>Bachelor's degree or diploma in Mechanical Engineering, Industrial Engineering, Electrical Engineering, or equivalent is required.</li><li>1-2 years of experience in Manufacturing Planning for both Production and Material.</li><li>Excellent communication skills.</li><li>Good reporting and documentation skills.</li><li>Good knowledge of production planning and quality control principles.</li><li>Good knowledge of manufacturing processes.</li><li>Working knowledge of MS Office and ERP systems, preferably Oracle Fusion.</li><li>Excellent Analytical Skills.</li></ul><p><br></p>
<ul><li>Install, inspect, maintain, calibrate, and troubleshoot instrumentation and control systems within Oil & Gas and petrochemical facilities</li><li>Perform preventive and corrective maintenance on field instrumentation devices, transmitters, meters, and control equipment</li><li>Troubleshoot and maintain Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), and Remote Terminal Units (RTU)</li><li>Read and interpret Piping and Instrumentation Diagrams (P&ID) and Instrument Loop Diagrams (ILD)</li><li>Perform instrument loop checking, calibration, and functional testing to ensure accurate process measurement and control</li><li>Inspect and maintain pressure, temperature, level, and flow measurement instruments</li><li>Install, configure, and troubleshoot radar transmitters and other field instrumentation devices</li><li>Support the operation and maintenance of complex control and analyzer systems</li><li>Perform troubleshooting and maintenance of control systems from Honeywell, Invensys, Yokogawa, Emerson, and GE</li><li>Monitor and troubleshoot cascade, ratio, feedback, and feedforward control loops</li><li>Configure and maintain instrumentation communication protocols, including HART and Fieldbus</li><li>Perform vibration monitoring and assist in identifying equipment performance issues</li><li>Coordinate with engineering, operations, and maintenance teams to resolve instrumentation and control system issues</li><li>Ensure compliance with applicable safety procedures, technical standards, and operational requirements</li><li>Prepare maintenance reports, calibration records, and technical documentation<br><br></li></ul><strong>Requirements<br><br></strong><ul><li> Education:</li><li>Candidates with a Degree: Bachelor's degree in Instrumentation and Control Engineering, Control and Instrumentation Systems Engineering, Automation Control, or a Bachelor's degree in a Technical, Trade, or Vocational field specializing in Instrumentation and Control Engineering</li><li>Expat Candidates Without a Degree: High School Certificate or Vocational School Diploma in Instrumentation and Control Engineering</li><li> Experience:</li><li>Candidates with a Degree: Minimum 4 years of relevant experience in the Oil & Gas sector</li><li>Candidates Without a Degree: Minimum 11 years of relevant experience in the Oil & Gas sector</li><li> English Language Proficiency: Minimum IELTS score of 6.0 or equivalent TOEFL scores:</li><li>Internet-Based (iBT): 60</li><li>Paper-Based (PBT): 498</li><li>Computer-Based (CBT): 171</li><li> Preferred Technical Skills & Experience:</li><li>Experience in Oil & Gas and petrochemical environments</li><li>Strong knowledge of instrumentation field devices, transmitters, and industrial control systems</li><li>Ability to read and interpret P&ID and Instrument Loop Diagrams (ILD)</li><li>Experience with DCS, PLC, and RTU systems</li><li>Familiarity with Honeywell, Invensys, Yokogawa, Emerson, GE, and Fox I/A control systems</li><li>Knowledge of pressure, level, and flow measurement instruments and meters</li><li>Experience with instrument installation, calibration, and troubleshooting</li><li>Understanding of cascade, ratio, feedback, and feedforward control strategies</li><li>Knowledge of Fieldbus and HART communication protocols</li><li>Experience with radar transmitters and complex analyzer systems</li><li>Familiarity with vibration analysis and equipment monitoring</li><li>Strong technical troubleshooting and problem-solving skills</li></ul>
<p>At Tenaris , you will join a global network of professionals working together toward a common goal: shape the future of energy through advanced tubular products and services . If you want to become part of a diverse team that values results, analytical approach to problem solving and teamwork, Tenaris is the place for you.</p><p>GT AI Engineering Industrial Application LOCATION: Dammam - Eastern Province - Saudi Arabia DEPARTMENT: INDUSTRIAL OPERATIONS Join our Global Training Program as a GT-AI Engineering Industrial Application trainee. An exceptional opportunity designed for individuals eager to grow professionally in a dynamic and international setting. This program offers a comprehensive learning experience focused on the development of technical expertise and transferable skills that are vital for a successful career in AI engineering and industrial applications. As a participant, you will engage in a variety of projects that expose you to different functions and challenges across the company. Working alongside peers and colleagues from diverse cultural and professional backgrounds, you will collaborate in an environment that fosters innovation, inclusivity, and continuous improvement. The program encourages you to contribute your ideas, curiosity, and enthusiasm to support ongoing initiatives aimed at advancing both our technological capabilities and operational excellence. You will develop core competencies in communication, teamwork, and problem-solving, empowering you to make meaningful contributions to project outcomes and team successes. Your journey will be supported by structured learning activities and mentorship from experienced professionals who are committed to enhancing your growth and adaptability. This training program emphasizes taking an active role in your own development in an ever-evolving industry, preparing you for future leadership opportunities.</p><h4><b><br></b></h4><h4><b>Key Responsibilities</b></h4><ul><li>Participate in multidisciplinary projects that integrate AI and industrial engineering principles to optimize performance and innovation.</li><li>Collaborate effectively across departments and international teams to deliver project milestones and knowledge sharing.</li><li>Apply analytical and technical skills to contribute to problem-solving and process improvement activities.</li><li>Engage actively in training sessions, workshops, and seminars to build domain-specific skills and professional competencies.</li><li>Support and contribute to the documentation and communication of project findings and recommendations.</li></ul><h4><br></h4><p><strong>Desired Candidate Profile</strong></p><h4>Who You Are</h4><ul><li>A fresh graduate, with less than 2y experience from graduation professional. Passionate about artificial intelligence, industrial engineering, and technology-driven solutions.</li><li>Eager to learn, adaptable, and motivated to take ownership of your personal and professional development.</li><li>Comfortable working collaboratively in a multicultural and diverse environment.</li><li>Strong communicator with an ability to express ideas clearly and engage with colleagues at all levels.</li><li>Enthusiastic about contributing innovative ideas and solutions to enhance business processes.</li></ul>
<strong>Organization- Grand Hyatt Al Khobar<br><br></strong><strong>Summary<br><br></strong>Assists in the smooth and efficient running of the Engineering Department in support of all other operating departments<br><br><strong>Qualifications<br><br></strong>Holder of an official trade certificate or diploma in engineering, with minimum of 2 years work experience as engineer in hotel or in a similar large building/complex with central plant.
<p>Requirements: * Bachelor s degree in Engineering (Any discipline). * Minimum 10 years of relevant marketing and business development experience in engineering consultancy. * Strong knowledge of the Saudi market and established client relationships. * Proven ability to secure consultancy contracts. * Excellent communication and negotiation skills. * Any nationality may apply. * Local transfer within Saudi Arabia preferred. * Immediate availability is an advantage.</p>
<strong>Company Description<br><br></strong><strong>Saipem</strong> is a global leader in the engineering and construction of major projects for the energy and infrastructure sectors, both offshore and onshore. Saipem is “One Company” organized into business lines: <strong>Asset Based Services</strong>, <strong>Drilling</strong>, <strong>Energy Carriers</strong>, <strong>Offshore Wind</strong>, <strong>Sustainable Infrastructures</strong>, <strong>Robotics & Industrialized Solutions</strong>. Always oriented towards technological innovation, the company’s purpose is “<strong>Engineering for a sustainable future</strong>”. As such Saipem is committed to supporting its clients on the energy transition pathway towards Net Zero, with increasingly digital means, technologies and processes geared for environmental sustainability. Listed on the Milan Stock Exchange, it is present in more than <strong>50 countries</strong> around the world and employs about <strong>30,000 people of over 130 nationalities</strong>.<br><br><strong>Purpose of the position: </strong>As Offshore Structural Designer you will be part of the Asset Based Services Business Line within Offshore Structural Engineering dept. You will support in structural design of jackets and top sides.<br><br><strong>How can you support us? <br><br></strong><ul><li>Prepare project structural drawings under the supervision of the Lead Designer, ensuring accuracy, clarity and compliance with project standards.</li><li>Perform 3D modeling activities, developing and updating models to support the design and engineering teams.</li><li>Interface effectively with Project Specialists and other Designers, sharing information and ensuring consistency across disciplines.</li><li>Contribute to the preparation and organization of project deliverables, such as drawings, material takeoffs and 3D models, supporting timely project execution.</li><li>Apply company procedures, industry standards and safety requirements to all drafting and modeling activities.</li><li>Support design reviews by providing updated drawings, models and documentation, and by implementing comments and revisions.<br><br></li></ul><strong>What are we looking for?<br><br></strong><strong>Education: </strong>Bachelor’s degree in Civil Engineering or technical diploma<br><br><strong>Background: </strong>Preferably 1-2 years of experience in offshore engineering<br><br><strong>Languages:</strong> English<br><br><strong>Technical Knowledge:</strong> Ms Office, AutoCAD. Preferably 3D modeling software’s.<br><br><strong>What We Can Offer To You<br><br></strong><ul><li>[Permanent Contract]</li><li>Corporate Benefits: We offer a comprehensive benefits packages.</li><li>Our One Saipem Way soft skills model leverages on skills development, career growth, opportunities to innovate through complex challenges by promoting communication and collaboration to achieve common goals.</li><li>Location: Dhahran, KSA<br><br></li></ul>Your opinion helps us grow every day! We would greatly appreciate it if you could share your opinion by completing this short, anonymous <strong>survey</strong>. https://forms.office.com/e/3sCe293xsf<br><br><strong>Additional Information<br><br></strong><strong>We support your development! </strong> Do you feel you might not fit this role perfectly? If you think you can contribute to our business development in the future, don’t hesitate to apply anyway through our spontaneous application form!<br><br><strong>We embrace diversity! </strong>At Saipem, we believe that innovation thrives through diversity. Our culture is built on mutual respect, collaboration, inclusion and the belief that our differences drive our progress.<br><br><strong>Safety and Sustainability matter to us! </strong>Operating in difficult and at times extreme situations, the focus is always on the health and safety of people and the preservation of the natural ecosystem.<br><br><strong>Find out more in our career page </strong><strong>here</strong><strong> and our Instagram profile </strong><strong>here</strong><strong>. <br><br></strong><strong>One</strong> vision, <strong>many</strong> paths, <strong>limitless </strong>possibilities.<br><br><ul><li>PRIVACY POLICY: In accordance with Kingdom of Saudi Arabia's Personal Data Protection Law (PDPL) and Royal Decree No. M/148 dated 05/09/1444H (27 March 2023). (“GDPR”). All interested candidates (L. 903/03) are invited to consult the privacy policy (art 13, 14, D.Lgs 196/03 and art 13 GDPR 679/16).</li></ul>
<h3>About Arab Center for Engineering Studies (ACES)</h3><p>Arab Center for Engineering Studies (ACES) is a specialized engineering company operating across the Middle East. ACES delivers a range of engineering services, including site and geotechnical investigation, materials technology and testing, quality control, specialized studies, land and marine surveying, and chemical and environmental testing. The company focuses on providing reliable, cost-effective, and quality engineering solutions to meet client expectations.</p><h3>About the Role</h3><p>ACES is seeking a <strong>Senior Calibration Engineer</strong> to join its team in Al Khobar, Eastern, Saudi Arabia. This full-time role involves coordinating construction testing activities, ensuring site lab readiness, issuing testing reports, and supervising testing procedures according to specifications. The Senior Calibration Engineer will also lead and motivate a team to maintain efficiency and report directly to the Calibration Technical Section Head.</p><h3>Key Responsibilities</h3><ul><li>Implement company policies, goals, objectives, and procedures, and support their development.</li><li>Oversee the implementation of operations plans, policies, procedures, and transition/migration plans.</li><li>Support the calibration technical head in managing resources, cost control, and budgeting.</li><li>Monitor costs and resources in day-to-day activities.</li><li>Ensure impartiality by avoiding conflicts of interest and providing unbiased assessments of equipment.</li><li>Maintain confidentiality of all data and calibration results, including secure handling and storage.</li><li>Respond to customer inquiries regarding calibration progress and reporting.</li><li>Prepare and initially check calibration reports before submission for approval.</li><li>Analyze data and conduct corrective actions to prevent non-conforming items.</li><li>Set calibration schedules and supervise work performed by supervisors and technicians.</li><li>Communicate with equipment suppliers/vendors and calibration agencies for purchasing, calibration, and rental.</li><li>Review master equipment certificates, calibration agencies' CMCs, and suppliers’ proposals.</li><li>Evaluate requests, prepare, and provide quotes and bids for calibration, maintenance, and special inspection works.</li><li>Conduct calibration/verification and special inspection reports, communicating results to relevant parties.</li><li>Ensure tests are carried out according to standard test methods/work instructions and customer requirements.</li><li>Conduct analysis of test results from technicians, ensuring compliance with national and international standards.</li><li>Ensure all site/lab equipment and instruments are fit for use by providing resources for calibration and maintenance.</li><li>Investigate non-conformities, devise, and implement corrective and preventive actions.</li><li>Review related orders to ensure all required information is clear and available.</li><li>Ensure proper storage of received items, maintaining specified storage conditions, handling requirements, and ambient temperature/humidity.</li><li>Supervise the work of lab supervisors and data entry personnel.</li><li>Review and approve certificates, technical proposals, and special reports in coordination with the calibration Head.</li><li>Provide technical training to technicians and adopt new technologies related to calibration.</li></ul><h3>Qualifications and Experience</h3><p>Candidates should possess 2-5 years of relevant experience in a calibration or engineering role. The position requires strong technical knowledge and the ability to manage and motivate a team effectively.</p><h3>Reporting Structure</h3><p>The Senior Calibration Engineer reports to the <strong>Calibration Technical Section Head</strong> and will have direct reports including Calibration Lab Supervisors, Technicians, and Data Entry personnel.</p><h3>Commitment to Sustainability</h3><p>ACES integrates sustainability into its operations and strategic direction, guided by the ISO 14001 Environmental Management Standard. The company maintains a fully digitized, paperless environment and embeds environmental sustainability into its governance framework. ACES actively seeks environmentally conscious talent and provides ongoing training and awareness programs, along with opportunities to contribute to sustainability initiatives and projects.</p>
<p>Location(s) Al Jubail, Eastern Company Guardian Glass Career Field Operations & Manufacturing Job Number PHONE_NUMBER Apply now Share Email Facebook X LinkedIn Your Job As a Reliability Coater Manager, you will provide strategic leadership for the maintenance and reliability of critical coating line assets, ensuring safe, reliable, and cost-effective operations. You will play a key role in maximising equipment availability, improving operational performance, and driving continuous improvement initiatives that create value for the business, customers, and manufacturing operations. Our Team You will join a collaborative manufacturing team responsible for delivering operational excellence across coating operations. Working closely with Operations, Engineering, EHS, Quality, and Production teams, you will help drive reliability improvements, optimise asset performance, and support the site's long-term growth and strategic objectives. What You Will Do Lead the reliability and maintenance strategy for critical coating line assets to improve equipment availability and operational performance. Create value through proactive maintenance programmes, reliability initiatives, and data-driven decision making. Partner with cross-functional teams to identify opportunities that enhance safety, quality, productivity, and manufacturing efficiency. Develop and mentor maintenance professionals while fostering a culture of accountability, continuous learning, and operational excellence. Drive root cause analysis and long-term corrective actions that reduce unplanned downtime and improve asset reliability. Lead shutdowns, turnarounds, and major maintenance activities to enable safe and effective execution of business priorities. Support capital projects, equipment upgrades, and commissioning activities that strengthen operational capability and future growth. Champion safety, environmental stewardship, and compliance while promoting a zero-incident mindset across the maintenance organisation. At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Who We Are At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results. #LI-MM2</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Mechanical Engineering, Electrical Engineering, Mechatronics Engineering, or a related engineering discipline.</p><p>Experience leading maintenance and reliability activities within an industrial manufacturing environment.</p><p>Experience managing maintenance teams, contractors, and cross-functional stakeholders.</p><p>Experience developing and executing preventive and predictive maintenance programmes.</p><p>Experience utilising CMMS systems for maintenance planning, work management, and reporting.</p><p>Knowledge of reliability engineering principles, root cause analysis methodologies, and asset management practices.</p><p>Background supporting coating lines, metal processing, steel manufacturing, or continuous process operations.</p><p>Knowledge of motors and drives, PLC/DCS systems, hydraulics, pneumatics, and rotating equipment.</p><p>Proficiency with SAP PM or other advanced CMMS platforms.</p><p>Demonstrated success leading shutdowns, turnarounds, and reliability improvement projects.</p><p>Success driving Lean Manufacturing, Operational Excellence, or continuous improvement initiatives.</p><p>Track record of managing maintenance budgets and executing capital improvement projects.</p><p>Maintenance leadership experience within an industrial manufacturing environment.</p><p>Industrial maintenance expertise supporting reliability and asset performance objectives.</p>
<p><strong>Position : ESTIMATION ENGINEER E & I</strong></p><p><br></p><p><strong>Degree in Electrical & Instrumentation Engineering</strong></p><p><br></p><p><strong>Analyze ITTs (Invitations to Tender), scope of work documents, and specifications.</strong></p><p><strong>Extract material quantities (Material Take-Offs and Bill of Quantities) from engineering drawings, single-line diagrams, and P&IDs.</strong></p><p><strong>Do Cost Calculation / Vendor quote evaluation / Compile comprehensive techno-commercial bid packages for submission to clients or main contractors.</strong></p>
Receive email alerts for Jobs For Faculty Of Engineering Graduates jobs
You can cancel your email alert at anytime