Field Monitor Jobs - Jubail Saudi
306 Jobs Found
Save and set alert for similar positionsManage alerts
The QC Inspector - Civil performs inspection and testing of civil construction activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on civil works (earthworks, formwork, rebar, concrete) Witness concrete pours, compaction tests, and cube/cylinder sampling per the ITP Verify formwork, rebar placement, and dimensions against approved civil drawings Verify materials (concrete mix, rebar) against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for civil works Ensure work fronts comply with approved method statements and civil codes Support preparation of quality documentation for civil handover dossiers<br><br>Requirements<br><br>SECTION VI: LEVEL OF AUTHORITY <br><br>Supervisory / Managerial:<br><br>No supervisory responsibility.<br><br>Financial:<br><br>No financial or budget authority.<br><br>SECTION VII: MISCELLANEOUS JOB-SPECIFIC REQUIREMENTS<br><br>General Profile / Specifications:<br><br> Field-based role requiring daily presence on active civil work fronts Exposure to site/construction conditions May require shift work or extended hours to cover inspection hold points
SECTION I: Job Summary <br><br>The QC Inspector - Piping performs inspection and testing of piping fabrication and installation activities to verify compliance with isometrics, welding procedures, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on piping fabrication and installation works Witness hydrotests, NDE activities (RT/UT/PT/MT), and other required tests per the ITP Verify pipe fit-up, alignment, and welding against approved isometrics and WPS Verify materials, spools, and fittings against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for piping works Ensure work fronts comply with approved method statements and piping codes (ASME B31.3) Support preparation of quality documentation for piping handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time weld/inspection acceptance rate Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities<br><br>Core Competencies<br><br> Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Piping Inspection Techniques Reading Isometrics, P&IDs & Welding Maps Welding Inspection & NDE Awareness (RT/UT/PT/MT) Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education<br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on piping construction/fabrication projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical Engineering QC/inspection certification (e.g., CSWIP, CWI) preferred<br><br>SECTION VI: LEVEL OF AUTHORITY<br><br>Supervisory / Managerial: No supervisory responsibility.<br><br>Financial: No financial or budget authority.<br><br>SECTION VII: MISCELLANEOUS JOB-SPECIFIC REQUIREMENTS<br><br>General Profile / Specifications:<br><br> Field-based role requiring daily presence on active piping work fronts Exposure to site/construction conditions May require shift work or extended hours to cover inspection hold points
SECTION I: Job Summary <br><br>The QC Inspector - Piping (UG) performs inspection and testing of underground piping installation activities, including trenching, bedding, coating, and backfill, to verify compliance with drawings, specifications, and applicable codes.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on underground piping installation works Witness trench excavation, pipe bedding, coating/wrapping, and backfill activities per the ITP Verify underground pipe alignment, depth, and joint integrity against approved drawings Witness hydrotests, holiday testing (coating integrity), and cathodic protection checks as required Verify materials (pipe, coating, bedding material) against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors prior to backfill Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for underground piping works Support preparation of quality documentation for underground piping handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances Hold point compliance prior to backfill Adherence to inspection schedules Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Underground Piping Inspection Techniques Trenching, Bedding & Backfill Inspection Coating/Wrapping & Holiday Testing Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on underground piping/utilities construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical/Civil Engineering QC/inspection certification preferred
The QC Inspector - Instrument performs inspection and testing of instrumentation construction activities to verify compliance with drawings, specifications, and applicable standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on instrumentation installation works Witness loop checks, calibration, and instrument testing activities per the ITP Verify instrument installation, tubing, and wiring against approved drawings and specifications Verify materials and instruments against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of test and measuring equipment used on site Support punch-list generation and verification of closure for instrumentation works Ensure work fronts comply with approved method statements and instrumentation standards Support preparation of quality documentation for instrumentation handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Instrumentation Inspection Techniques Reading Loop Diagrams & Instrument Datasheets Calibration & Loop Checking Verification Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on instrumentation construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Instrumentation Engineering QC/inspection certification preferred
SECTION I: Job Summary <br><br>The QC Inspector - Structural performs inspection and testing of structural steel fabrication and erection activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on structural steel fabrication and erection works Witness structural bolting, welding, and alignment checks per the ITP Verify structural steel installation against approved drawings, erection plans, and tolerances Verify materials (structural steel, bolts, coatings) against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for structural works Ensure work fronts comply with approved method statements and structural codes (AISC, etc.) Support preparation of quality documentation for structural handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Structural Steel Inspection Techniques Reading Structural/Erection Drawings Bolting & Welding Inspection Standards (Structural) Inspection & Test Plans (ITPs) Measuring & Alignment Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on structural steel construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Civil/Structural Engineering QC/inspection certification preferred
SECTION I: Job Summary <br><br>The QC Inspector - Structural performs inspection and testing of structural steel fabrication and erection activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on structural steel fabrication and erection works Witness structural bolting, welding, and alignment checks per the ITP Verify structural steel installation against approved drawings, erection plans, and tolerances Verify materials (structural steel, bolts, coatings) against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for structural works Ensure work fronts comply with approved method statements and structural codes (AISC, etc.) Support preparation of quality documentation for structural handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Structural Steel Inspection Techniques Reading Structural/Erection Drawings Bolting & Welding Inspection Standards (Structural) Inspection & Test Plans (ITPs) Measuring & Alignment Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on structural steel construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Civil/Structural Engineering QC/inspection certification preferred
SECTION I: Job Summary <br><br>The QC Inspector - Mechanical performs inspection and testing of mechanical equipment installation activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on mechanical equipment installation works (pumps, vessels, packages, structural skids) Verify equipment installation, alignment, and grouting against approved drawings and vendor specifications Witness mechanical running tests, alignment checks, and equipment box-up activities per the ITP Verify materials and equipment against material certificates, vendor data, and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for mechanical works Ensure work fronts comply with approved method statements and mechanical equipment standards Support preparation of quality documentation for mechanical handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Mechanical Equipment Inspection Techniques Reading Mechanical/Equipment Drawings & Vendor Data Equipment Alignment & Grouting Inspection Inspection & Test Plans (ITPs) Measuring & Alignment Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on mechanical equipment installation projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical Engineering QC/inspection certification preferred
SECTION I: Job Summary <br><br>The QC Inspector - Fireproofing performs inspection and testing of passive fireproofing application activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on fireproofing application works Verify surface preparation, primer, and fireproofing material application against specifications Witness thickness (DFT/WFT) checks and adhesion tests per the ITP Verify materials and batch certificates against approved specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment (thickness gauges) used on site Support punch-list generation and verification of closure for fireproofing works Ensure work fronts comply with approved method statements and fireproofing standards Support preparation of quality documentation for fireproofing handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Fireproofing/Passive Fire Protection Inspection Techniques Surface Preparation & Coating Application Standards Thickness (DFT/WFT) & Adhesion Testing Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on fireproofing/coating application projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical/Civil Engineering NACE/coating inspection certification preferred
<h3>About the Role</h3><p>Jubail and Yanbu Industrial Cities Services Company (JABEEN) is seeking an <strong>Airport Security Management Director</strong> to join their team in Al Jubail, Eastern region. This full-time role involves overseeing and enhancing security operations to ensure the safety of airport facilities, aircraft, passengers, and cargo.</p><h3>Key Responsibilities</h3><ul><li>Supervise the implementation of security plans, protocols, and procedures to protect airport facilities, aircraft, passengers, and cargo.</li><li>Manage the security team, assign tasks, monitor performance, and provide guidance, training, and skill development for staff.</li><li>Conduct and monitor security patrols and inspections to identify threats and risks, preventing unauthorized access and suspicious activities.</li><li>Monitor surveillance camera systems and alarm devices, ensuring immediate response to incidents and security alerts.</li><li>Ensure compliance with national and international civil aviation security regulations, including GACA requirements and ICAO standards.</li><li>Manage and monitor access to airport facilities, review permit applications, and issue permanent and temporary security passes according to approved procedures.</li><li>Ensure the maintenance and updating of records for airport staff, vehicles, and equipment, in coordination with airport management and relevant authorities.</li><li>Coordinate with security agencies and relevant entities to enhance passenger security and streamline travel procedures.</li><li>Develop and implement security training, exercises, and simulations to improve readiness and preparedness for various scenarios.</li><li>Evaluate reports and incidents based on their nature and severity, oversee response, containment, mitigation, and control plans, and document incidents and actions taken.</li><li>Prepare security minutes for the Airport Security Committee, update the Security Manual, and monitor the implementation of the National Civil Aviation Security Program.</li><li>Monitor the application of security policies and procedures, prepare periodic reports, and submit recommendations to improve performance.</li></ul><h3>Qualifications and Experience</h3><ul><li>Bachelor's degree in Aviation Management, Airport Operations, Aviation Security, Engineering, Business Administration, or a related field.</li><li>7+ years of experience in airport operations or airport security, including airport operations, airside, and/or terminal experience, or related experience.</li><li>Proven experience in leadership, management, or supervisory positions related to airport security, with the ability to manage teams and coordinate with regulatory bodies and stakeholders.</li><li>Understanding of General Authority of Civil Aviation (GACA) regulations and bylaws, particularly GACAR Part 139 and other relevant operational requirements.</li><li>Professional certifications in the field are preferred.</li></ul><h3>Work Type</h3><p>This is a full-time position requiring dedicated commitment to airport security operations.</p><h3>Experience Required</h3><p>Candidates should have 5-10 years of relevant experience, with a minimum of 7 years specifically in airport operations or security as detailed in the qualifications.</p><h3>Application Process</h3><p>The salary for this position will be disclosed during the interview process. Interested candidates are encouraged to apply.</p>
<h3>About the Role</h3><p>Jubail and Yanbu Industrial Cities Services Company (JABEEN) is seeking an experienced Airport Maintenance Management Director to oversee maintenance operations in Al Jubail, Eastern Region. This full-time role requires a professional with 5-10 years of experience in airport maintenance, ensuring the efficient and ready operation of airport facilities and infrastructure.</p><h3>Key Responsibilities</h3><ul><li>Supervise airport maintenance operations, ensuring facilities, equipment, and infrastructure function efficiently.</li><li>Monitor weekly and monthly schedules for generators and automatic transfer switches, and oversee periodic testing of mechanical systems.</li><li>Oversee the inspection and maintenance of water and sewage treatment plants, conveyor belts, elevators, escalators, fire extinguishers, and passenger boarding bridges.</li><li>Track power and water outages and maintenance-related disruptions, assess their impact on airport operations, and coordinate resolution.</li><li>Ensure the availability and readiness of specialized tools and test equipment for electrical and electronic system maintenance, and monitor periodic testing and calibration.</li><li>Monitor contractors' implementation of irrigation and cleaning plans, establish cleaning schedules and plans, and oversee quality and material/equipment availability.</li><li>Prepare and review reports on materials and supplies used in preventive and corrective maintenance, and inspect newly installed systems.</li><li>Inspect maintenance warehouses to assess spare parts storage conditions and monitor inventory of recoverable spare parts and company-owned materials.</li><li>Identify the need for work permits for maintenance, repair, renovation, and construction activities, prepare necessary documents, and submit requests to airport management and relevant authorities.</li><li>Coordinate with airport staff, security, air traffic control, and stakeholders regarding scheduled works and their operational impacts.</li><li>Monitor HVAC, lighting, and energy-consuming equipment using building automation systems.</li><li>Prepare necessary drawings, layouts, and spatial data as required, and update the maintenance section of the Airport Operations Manual in accordance with GACAR 139 requirements.</li><li>Supervise the maintenance team, develop their skills, monitor policy and procedure implementation, and prepare progress reports and improvement recommendations.</li></ul><h3>Qualifications and Experience</h3><ul><li>Bachelor's degree in Aviation Management, Airport Operations, Aviation Security, Aviation Safety, Engineering, Business Administration, or a related field.</li><li>7+ years of experience in airport maintenance, including airport operations, airside, and/or terminal operations, or related experience.</li><li>Proven experience in leadership, managerial, or supervisory roles related to airport maintenance, with the ability to manage teams and coordinate with regulatory bodies and stakeholders.</li><li>Understanding of General Authority of Civil Aviation (GACA) regulations and systems, particularly GACAR Part 139 and other relevant operational requirements.</li><li>Professional certifications in the same field are preferred.</li></ul><h3>Work Type</h3><p>This is a full-time position based in Al Jubail, Eastern Region.</p><h3>Application Process</h3><p>Qualified candidates are invited to apply for this role. Salary details will be discussed during the interview process.</p>
<h2 ><span lang="ar" dir="rtl">إعلان الشركة العالمية للصناعات البحرية عن وظائف في مختلف المجالات الإدارية والفنية والتقنية والهندسية</span></h2><h3 ><span lang="ar" dir="rtl">المسميات الوظيفية:</span></h3><ul><li><p ><span lang="ar" dir="rtl">مفتش مراقبة الجودة الهيكلية</span></p></li><li><p ><span lang="ar" dir="rtl">مراقب التكاليف</span></p></li><li><p ><span lang="ar" dir="rtl">مفتش أول مراقبة الجودة الميكانيكية</span></p></li><li><p ><span lang="ar" dir="rtl">مفتش أول مراقبة جودة اللحام</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف قسم اللحام</span></p></li><li><p ><span lang="ar" dir="rtl">مسؤول الإنتاج</span></p></li><li><p ><span lang="ar" dir="rtl">منسق تصاريح العمل</span></p></li><li><p ><span lang="ar" dir="rtl">منسق المواد</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي عقود</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس إنتاج</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف قسم الأنابيب</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف ورشة الهياكل</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف قسم الميكانيكا</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف قسم الكهرباء</span></p></li><li><p ><span lang="ar" dir="rtl">منسق أول تصريح عمل</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف التشغيل الميكانيكي</span></p></li><li><p ><span lang="ar" dir="rtl">مراقب إدارة الإنتاج</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس إنتاج ميكانيكي</span></p></li><li><p ><span lang="ar" dir="rtl">مفتش أول مراقبة جودة الطلاء</span></p></li><li><p ><span lang="ar" dir="rtl">مدير خدمات الدعم</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس تخطيط</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس إنتاج</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف أول تجهيز الأعمال الإنشائية</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي فحص الأصول</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس أنابيب الإنتاج</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي عمليات لوجستية</span></p></li><li><p ><span lang="ar" dir="rtl">محلل علاقات الموردين</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي فحص الأصول الكهربائية</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي فحص الأصول الميكانيكية</span></p></li><li><p ><span lang="ar" dir="rtl">(وظائف أخرى)</span></p></li></ul><h3 ><span lang="ar" dir="rtl">التخصصات المطلوبة:</span></h3><ul><li><p ><span lang="ar" dir="rtl">إدارة الأعمال</span></p></li><li><p ><span lang="ar" dir="rtl">إدارة العمليات</span></p></li><li><p ><span lang="ar" dir="rtl">إدارة سلاسل الإمداد</span></p></li><li><p ><span lang="ar" dir="rtl">الأمن</span></p></li><li><p ><span lang="ar" dir="rtl">هندسة الأمن</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة الميكانيكية</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة الكهربائية</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة</span></p></li><li><p ><span lang="ar" dir="rtl">(تخصصات أخرى)</span></p></li></ul><h3 ><span lang="ar" dir="rtl">الشروط:</span></h3><ul><li><p ><span lang="ar" dir="rtl">أن يكون المتقدم حاصل على المؤهلات والخبرات الموضحة في الوصف الوظيفي.</span></p></li><li><p ><span lang="ar" dir="rtl">إجادة اللغة الإنجليزية تحدثاً وكتابة.</span></p></li><li><p ><span lang="ar" dir="rtl">القدرة على العمل تحت الضغط وساعات إضافية (مع التعويض).</span></p></li></ul><h3 ><span lang="ar" dir="rtl">لمحة عن الشركة العالمية للصناعات البحرية:</span></h3><p ><span lang="ar" dir="rtl">الشركة العالمية للصناعات البحرية (IMI) مشروع مشترك بين أرامكو السعودية وشركة لامبريل بي إل سي والشركة الوطنية للنقل البحري وشركة هيونداي للصناعات الثقيلة المحدودة، يقدم المشروع واحداً من أكبر المجمعات البحرية المتكاملة الخدمات في العالم عند إكتمال مراحل التشغيل في عام 2022م، ويقع المجمع في رأس الخير قرب مدينة الجبيل الصناعية.</span></p>
<h3>About the Role</h3><p>Jubail and Yanbu Industrial Cities Services Company (JABEEN) is seeking an Airport Safety Management Director to join their team in Al Jubail, Eastern region. This full-time role involves leading and overseeing all aspects of airport safety, health, and environmental compliance, ensuring adherence to civil aviation regulations and international standards.</p><h3>Key Responsibilities</h3><ul><li>Develop and implement safety, health, and environmental policies, procedures, and programs in accordance with civil aviation requirements and international standards.</li><li>Monitor environmental compliance programs related to waste management, pollution prevention, and resource conservation.</li><li>Oversee the safe operation of vehicles and equipment within the airport to prevent collisions with aircraft and other equipment, and ensure safe handling and transport of hazardous materials.</li><li>Coordinate responses to hazardous material incidents, including containment, cleanup procedures, and ensuring the safety of personnel and the environment.</li><li>Prepare and conduct emergency drills and evacuation exercises to test readiness and improve the effectiveness of incident response.</li><li>Conduct regular safety inspections to ensure airport facilities are safe and free from hazards, including foreign object debris (FOD).</li><li>Lead investigations into safety incidents and near misses to identify root causes and develop corrective and preventive measures to prevent recurrence.</li><li>Prepare comprehensive reports on incidents and hazards, recommend mitigation measures, and ensure timely reporting to relevant authorities and stakeholders.</li><li>Monitor regulatory requirements and best practices in safety and environmental management, and coordinate with regulatory bodies and auditors during inspections and audits.</li><li>Ensure that safety and environmental documents and records are maintained and updated in accordance with regulatory requirements.</li><li>Develop and update emergency response plans for various scenarios, including aircraft incidents, hazardous material spills, and natural disasters.</li><li>Coordinate with emergency response teams and agencies to ensure readiness and effective response.</li><li>Monitor and update the Airport Safety Management System (SMS) manual in accordance with General Authority of Civil Aviation (GACA) requirements and GACAR Part 139.</li><li>Supervise the safety team, develop staff skills, ensure the implementation of policies and procedures, and prepare periodic reports.</li></ul><h3>Qualifications and Experience</h3><ul><li>Bachelor's degree in Aviation Management, Airport Operations, Aviation Safety, Engineering, Business Administration, or a related field.</li><li>7+ years of experience in airport safety, including airport operations, airside, and/or terminal experience, or related fields.</li><li>Proven experience in leadership, management, or supervisory roles related to airport safety, with the ability to manage teams and coordinate with regulatory bodies and stakeholders.</li><li>Understanding of GACA regulations and rules, particularly GACAR Part 139 and other relevant operational requirements.</li><li>Professional certifications in the same field are preferred.</li></ul><h3>Work Type</h3><p>This is a full-time position requiring 5-10 years of experience. Salary for this role will be disclosed during the interview process.</p>
<div dir="ltr"><h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Job Overview</h3>
<p style="margin:0 0 12px;">Al Asas Al Taqaddum Factory for Plastic Industries is seeking a <strong style="font-weight:700;">Security Guard</strong> to join its team in Jubail, Eastern Province. This role aims to protect property and ensure a safe work environment through regular monitoring and regulating entry and exit. The position is full-time and requires experience ranging between two to five years.</p>
<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Purpose of the Role</h3>
<p style="margin:0 0 12px;">The Security Guard is responsible for conducting regular patrols and monitoring workplaces to protect property from theft and vandalism. The role also includes overseeing entry and exit points of the facility and maintaining public order to ensure a safe and organized work environment.</p>
<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Tasks and Responsibilities</h3>
<ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;">
<li style="margin:0 0 6px;">Monitoring entry and exit operations at the facility and issuing necessary permits.</li>
<li style="margin:0 0 6px;">Verifying the identity of suppliers and visitors, recording their details, and issuing entry permits.</li>
<li style="margin:0 0 6px;">Conducting regular patrols in work areas, inspecting gates, doors, and windows to ensure they are closed and secure.</li>
<li style="margin:0 0 6px;">Mediating between visitors and employees to maintain order, protect property, and disseminate regulations and guidelines within the facility.</li>
<li style="margin:0 0 6px;">Responding promptly to alarms and investigating incidents, communicating with fire, ambulance, or police departments as needed, and reporting incidents to management.</li>
<li style="margin:0 0 6px;">Strictly adhering to the facility’s health, safety, and environmental policies and procedures.</li>
</ul>
<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Required Qualifications and Experience</h3>
<ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;">
<li style="margin:0 0 6px;">Two to five years of <strong style="font-weight:700;">practical experience</strong> in security or guarding.</li>
<li style="margin:0 0 6px;">Ability to effectively monitor and secure property.</li>
<li style="margin:0 0 6px;">Strong communication skills for interacting with visitors and employees.</li>
<li style="margin:0 0 6px;">Ability to respond quickly to incidents and emergencies.</li>
</ul>
<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Environment</h3>
<p style="margin:0 0 12px;">The work environment is at Al Asas Al Taqaddum Factory for Plastic Industries in Jubail, Eastern Province. The position is full-time and requires on-site presence to ensure continuous security and protection of the facility.</p>
<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">How to Apply</h3>
<p style="margin:0 0 12px;">Interested candidates who meet the above requirements are invited to apply for this opportunity at Al Asas Al Taqaddum Factory for Plastic Industries.</p></div>
<h3>About the Company</h3><p>iHR (International Human Resources) is a company specializing in providing human resources solutions. This role supports the company's mission to deliver comprehensive HR services to clients.</p><h3>About the Role</h3><p>iHR (International Human Resources) is seeking a <strong>Sales Representative (HR Sector)</strong> to join their team in Al Jubail, Eastern region. This full-time role involves contributing to business development and attracting new clients through field visits, focusing on marketing recruitment services and human resources solutions. The ideal candidate will have 2-5 years of experience in a related field.</p><h3>Key Responsibilities</h3><ul><li>Attracting new clients and expanding the targeted client base.</li><li>Conducting regular field visits to current and prospective clients.</li><li>Promoting recruitment services and human resources solutions.</li><li>Preparing and presenting commercial proposals, and negotiating with clients until contracts are finalized.</li><li>Building and managing long-term client relationships.</li><li>Monitoring client needs and providing appropriate solutions.</li><li>Achieving monthly and annual sales targets.</li><li>Preparing periodic reports and tracking sales opportunities.</li></ul><h3>Qualifications and Requirements</h3><ul><li>Bachelor's degree in Business Administration or a related specialization.</li><li>Minimum of two years of experience in field sales within the human resources or services sector.</li></ul><h3>Required Skills</h3><ul><li>Strong communication, negotiation, and relationship-building skills.</li><li>Ability to achieve targets and work effectively in a competitive environment.</li><li>Valid driving license and readiness for field work.</li></ul><h3>Work Environment</h3><p>This is a full-time position based in Al Jubail, Eastern region, requiring regular field visits to clients.</p>
<h2 ><span lang="ar" dir="rtl">إعلان شركة أرامكو توتال ساتورب عن وظائف في عدة مجالات</span></h2><h3 ><span lang="ar" dir="rtl">المسميات الوظيفية:</span></h3><ul><li><p ><span lang="ar" dir="rtl">أخصائي أول جودة المختبر</span></p></li><li><p ><span lang="ar" dir="rtl">مدير نظام إدارة الجودة في المختبر</span></p></li><li><p ><span lang="ar" dir="rtl">متخصص اللحام</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي اختبار غير إتلافي</span></p></li><li><p ><span lang="ar" dir="rtl">مفتش ثاني</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف الدعم الفني للأمن</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف المشاريع الصغيرة</span></p></li><li><p ><span lang="ar" dir="rtl">فني مراقبة العمليات</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس عمليات</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف هندسة العمليات</span></p></li><li><p ><span lang="ar" dir="rtl">محاسب مساعد دفتر الأستاذ العام</span></p></li><li><p ><span lang="ar" dir="rtl">مدير خدمات العقود</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس بيئي أول</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس أول متخصص التآكل</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس رئيسي لسلامة العمليات</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف هندسة الصيانة الكهربائية</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي أول الأداء المالي</span></p></li></ul><h3 ><span lang="ar" dir="rtl">التخصصات المطلوبة:</span></h3><ul><li><p ><span lang="ar" dir="rtl">إدارة الأعمال</span></p></li><li><p ><span lang="ar" dir="rtl">المحاسبة</span></p></li><li><p ><span lang="ar" dir="rtl">المالية</span></p></li><li><p ><span lang="ar" dir="rtl">القانون</span></p></li><li><p ><span lang="ar" dir="rtl">هندسة الإلكترونيات</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة البيئية</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة الكهربائية</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة الكيميائية</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة</span></p></li><li><p ><span lang="ar" dir="rtl">أو مايعادلهم</span></p></li></ul><h3 ><span lang="ar" dir="rtl">المزايا العمل في شركة ساتورب:</span></h3><ul><li><p ><span lang="ar" dir="rtl">رواتب تنافسية</span></p></li><li><p ><span lang="ar" dir="rtl">بدل سكن</span></p></li><li><p ><span lang="ar" dir="rtl">بدل نقل</span></p></li><li><p ><span lang="ar" dir="rtl">إجازة سنوية مدفوعة (30 يوم) للموظفين من الدرجة التاسعة فأقل.</span></p></li><li><p ><span lang="ar" dir="rtl">إجازة سنوية مدفوعة (38 يوم) للموظفين من الدرجة العاشرة فأعلى.</span></p></li><li><p ><span lang="ar" dir="rtl">تأمين طبي</span></p></li><li><p ><span lang="ar" dir="rtl">راتب إضافي سنوي</span></p></li><li><p ><span lang="ar" dir="rtl">بدل إجازة (70% من الراتب).</span></p></li><li><p ><span lang="ar" dir="rtl">برنامج تملك المنازل للسعوديين.</span></p></li><li><p ><span lang="ar" dir="rtl">بدل تأثيث يدفع مرة واحدة.</span></p></li><li><p ><span lang="ar" dir="rtl">هدايا خدمة كل خمس سنوات.</span></p></li></ul><p ><span lang="ar" dir="rtl"><strong>ملاحظة:</strong> المزايا تختلف حسب كل وظيفة.</span></p><h3 ><span lang="ar" dir="rtl">لمحة عن الشركة:</span></h3><p ><span lang="ar" dir="rtl">ساتورب (SATORP) اختصار لمسمى شركة أرامكو توتال للتكرير والبتروكيماويات، مشروع مشترك بين أرامكو السعودية وشركة توتال الفرنسية، تعد ساتورب أكبر مشروع تكريري بتروكيماوي عطري في العالم وأول مصفاة بترول متكاملة في المملكة العربية السعودية بطاقة 400 ألف برميل يومياً، وتقع المصفاة في مدينة الجبيل الصناعية.</span></p>
<h3>About the Role</h3><p>United Technology Contracting Company is looking for a <strong>Security Guard</strong> to join its team in Jubail, Eastern Province. This role aims to protect property and maintain order within the workplace through periodic monitoring and control of entries and exits. The position is full-time and requires 0-1 years of experience.</p><h3>Purpose of the Job</h3><p>The security guard is responsible for ensuring the safety and security of the facility, its employees, and visitors. This includes conducting regular patrols, monitoring entry points, and responding to emergency incidents to maintain a safe and organized work environment.</p><h3>Key Duties and Responsibilities</h3><ul><li>Monitoring entries and exits to the facility and issuing the necessary permits for them.</li><li>Verifying the identity of suppliers and visitors, recording their data, and issuing entry permits to them.</li><li>Conducting regular patrols of the workplace and checking gates, doors, and windows to ensure they are locked and secured.</li><li>Circulating among visitors and employees to maintain order and protect property, and enforcing the regulations applicable in the facility.</li><li>Responding immediately to alarms and investigating reported incidents.</li><li>Contacting fire, ambulance, or police departments when necessary, and notifying senior management of incidents.</li><li>Full commitment to the company's approved health, safety, and environmental policies and procedures.</li></ul><h3>Qualifications and Experience</h3><ul><li>Work experience ranging from 0 to 1 year in the field of security or equivalent.</li><li>Ability to monitor effectively and make quick decisions in emergency situations.</li><li>Adherence to instructions and the ability to implement security policies and procedures.</li></ul><h3>Work Environment</h3><p>The security guard works full-time at the United Technology Contracting Company sites in Jubail, Eastern Province. The job requires vigilance and readiness to deal with various security conditions.</p><h3>Additional Information</h3><p>The salary for this role will be determined and discussed during the interview.</p>
<h2 style="text-align: right;"><span lang="ar" dir="rtl">إعلان شركة أرامكو توتال ساتورب عن وظائف هندسية وفنية وإدارية</span></h2><p style="text-align: right;"><span lang="ar" dir="rtl">تعلن شركة أرامكو توتال للتكرير والبتروكيماويات (ساتورب) عن توفر فرص وظيفية لحملة البكالوريوس في مجالات متنوعة، للعمل في مدينة الجبيل الصناعية، وفقاً للمسميات الوظيفية التالية:</span></p><h3 style="text-align: right;"><span lang="ar" dir="rtl">المسميات الوظيفية:</span></h3><ul><li><p style="text-align: right;"><span lang="ar" dir="rtl">مهندس أول.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">فني ميداني معتمد.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">مشرف هندسة العمليات.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">مدير نظام إدارة الجودة في المختبر.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">متخصص اللحام.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">مشرف الدعم الفني للأمن.</span></p></li></ul><h3 style="text-align: right;"><span lang="ar" dir="rtl">التخصصات المطلوبة:</span></h3><ul><li><p style="text-align: right;"><span lang="ar" dir="rtl">هندسة الإلكترونيات.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">الهندسة الكيميائية.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">أو التخصصات ذات الصلة.</span></p></li></ul><h3 style="text-align: right;"><span lang="ar" dir="rtl">مزايا العمل في شركة ساتورب:</span></h3><ul><li><p style="text-align: right;"><span lang="ar" dir="rtl">رواتب تنافسية.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">بدل سكن.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">بدل نقل.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">إجازة سنوية مدفوعة لمدة 30 يوماً للموظفين من الدرجة التاسعة فأقل.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">إجازة سنوية مدفوعة لمدة 38 يوماً للموظفين من الدرجة العاشرة فأعلى.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">تأمين طبي.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">راتب إضافي سنوي.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">بدل إجازة يعادل 70% من الراتب.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">برنامج تملك المنازل للسعوديين.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">بدل تأثيث يُدفع مرة واحدة.</span></p></li><li><p style="text-align: right;"><span lang="ar" dir="rtl">هدايا تقديرية عند إكمال كل خمس سنوات من الخدمة.</span></p></li></ul><p style="text-align: right;"><span lang="ar" dir="rtl"><strong>ملاحظة:</strong> تختلف المزايا الوظيفية حسب كل وظيفة.</span></p><h3 style="text-align: right;"><span lang="ar" dir="rtl">نبذة عن الشركة:</span></h3><p style="text-align: right;"><span lang="ar" dir="rtl">ساتورب (SATORP) هي اختصار لاسم شركة أرامكو توتال للتكرير والبتروكيماويات، وهي مشروع مشترك بين أرامكو السعودية وشركة توتال الفرنسية.</span></p><p style="text-align: right;"><span lang="ar" dir="rtl">تُعد ساتورب من أكبر مشاريع التكرير والبتروكيماويات العطرية في العالم، وأول مصفاة بترول متكاملة في المملكة العربية السعودية، بطاقة إنتاجية تبلغ 400 ألف برميل يومياً، وتقع في مدينة الجبيل الصناعية.</span></p>
SECTION I: Job Summary <br><br>The QA/QC Supervisor oversees day-to-day quality control activities across all site disciplines, supervising QC Inspectors, coordinating inspection and test plan execution, and ensuring consistent application of quality standards and procedures.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Supervise and coordinate the daily activities of QC Inspectors across all disciplines Ensure inspections, tests, and hold points are executed per approved Inspection & Test Plans (ITPs) Review daily QC inspection reports and ensure timely, accurate documentation Coordinate hold point notifications and inspection scheduling with client/third-party inspectors Support the QC Manager in managing the Non-Conformance Report (NCR) process and corrective actions Conduct quality walkdowns and spot-check inspections across active work fronts Verify calibration and control of inspection and test equipment used by the QC team Coordinate training and technical guidance for QC Inspectors on inspection procedures and standards Liaise with construction supervision to resolve quality-related work front issues Support preparation and compilation of quality documentation for handover dossiers Report quality performance, trends, and issues to the QC Manager Support internal quality audits and readiness for client/third-party audits<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Number and severity of non-conformances (NCRs) Inspection schedule/hold point compliance First-time inspection pass rate across disciplines Timely closure of NCRs and punch-list items Quality of QC team documentation and reporting<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Leadership Attention to Detail Analytical Thinking Communication Skills Decision Making Accountability<br><br>Technical Skills<br><br> Quality Management Systems (ISO 9001) Inspection & Test Plan (ITP) Coordination Multidiscipline Inspection Standards Awareness NCR & Corrective Action Management QC Team Supervision & Scheduling Reading Technical Drawings & Specifications (multidiscipline)<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 8-10 years of experience in quality control on EPC/industrial construction projects, including supervisory experience<br><br>Education<br><br> Bachelor's degree in Engineering (Civil/Mechanical) or a related field QC/inspection certification preferred
<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About Expertise Company Ltd.</h3>
<p style="margin:0 0 12px; **********<strong>;">Established in 2008 and headquartered in Al Jubail, Expertise Company Ltd. is a leading provider of industrial services. The company supports clients across various sectors, including Oil and Gas, Energy, process plants, water treatment plants, cement plants, and construction. Operating through multiple offices across the kingdom, Expertise manages projects of varying size and complexity with a workforce exceeding 15,000 employees.</p>
<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">The Document Controller Role</h3>
<p style="margin:0 0 12px; </strong>********<strong>;">Expertise is seeking a <strong style="font-weight:700;">Document Controller</strong> for a full-time, on-site position in Al Jubail, Eastern Region. This role is responsible for managing and maintaining project documentation and records in accordance with company standards and client requirements. The Document Controller ensures efficient information flow and supports project execution within a dynamic industrial setting.</p>
<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3>
<ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;">
<li style="margin:0 0 6px;">Organizing, classifying, and updating project documents and records.</li>
<li style="margin:0 0 6px;">Ensuring version control and maintaining accurate filing systems for both electronic and hard-copy records.</li>
<li style="margin:0 0 6px;">Coordinating with project teams for document collection, review, and distribution.</li>
<li style="margin:0 0 6px;">Tracking document approvals and supporting audits and compliance checks.</li>
<li style="margin:0 0 6px;">Monitoring document workflows and responding to document-related inquiries.</li>
<li style="margin:0 0 6px;">Ensuring all documentation is complete, accessible, and properly stored.</li>
<li style="margin:0 0 6px;">Communicating regularly with internal stakeholders to support timely information flow.</li>
</ul>
<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Qualifications and Experience</h3>
<ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;">
<li style="margin:0 0 6px;">A minimum of <strong style="font-weight:700;">10 years of experience</strong> in document control or a related field.</li>
<li style="margin:0 0 6px;">Demonstrated ability to manage and maintain project documentation effectively.</li>
<li style="margin:0 0 6px;">Experience with version control and maintaining accurate filing systems.</li>
<li style="margin:0 0 6px;">Familiarity with company standards and client requirements for documentation.</li>
</ul>
<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Work Environment</h3>
<p style="margin:0 0 12px; </strong>**********;">This is a full-time, on-site position based in Al Jubail, Saudi Arabia. The role involves working within diverse industrial environments and collaborating with cross-functional project teams.</p>
<h3>About Seder Group</h3><p>Seder Group is a prominent Saudi organization that delivers integrated services across various sectors throughout the Kingdom of Saudi Arabia. The company is dedicated to achieving excellence, fostering innovation, and providing sustainable solutions that contribute to the Kingdom's development and growth.</p><h3>The Role of Traffic Signals Engineer</h3><p>Seder Group is seeking a <strong>Traffic Signals Engineer</strong> to join their team in Al Jubail, Eastern Province, Saudi Arabia. This full-time position requires an engineer with 5-10 years of experience to manage and execute various aspects of traffic signal systems, from design and implementation to maintenance and troubleshooting.</p><h3>Key Responsibilities</h3><ul><li>Design signal power systems, including service points, load calculations, conduit and conductor sizing, voltage drop, grounding and bonding, and overcurrent protection.</li><li>Produce electrical plans, wiring diagrams, cabinet layouts, specifications, and cost estimates for new and rebuilt signals.</li><li>Specify controller cabinets, controllers, malfunction management units, power supplies, LED signal heads, pedestrian equipment, and surge protection.</li><li>Design battery backup and uninterruptible power supply (UPS) systems, and solar-powered installations where grid power is unavailable.</li><li>Design and review detection and communications infrastructure, including loops, video and radar detection, fiber, wireless, and Ethernet networks.</li><li>Support integration of emergency vehicle preemption, transit signal priority, flashing beacons, pedestrian hybrid beacons, and school zone flashers.</li><li>Coordinate with utility companies on service connections, metering, and outage response.</li><li>Perform and oversee field testing and commissioning, including ground resistance, insulation resistance, power quality, and conflict monitor tests.</li><li>Troubleshoot malfunctions, power outages, lightning and surge damage, and vehicle knockdowns alongside maintenance crews.</li><li>Review contractor submittals, shop drawings, and RFIs, and inspect installations for conformance with plans and standards.</li><li>Maintain signal asset inventories, preventive maintenance programs, and standard electrical details.</li><li>Mentor junior engineers and technicians, and support traffic engineers with hardware and configuration needs.</li></ul><h3>Required Experience</h3><ul><li>A minimum of 5 years and a maximum of 10 years of relevant experience in traffic signal engineering.</li></ul><h3>Work Type and Location</h3><p>This is a <strong>full-time</strong> position based in <strong>Jubail, Eastern Province, Saudi Arabia</strong>.</p>
Receive email alerts for Field Monitor Jobs jobs
You can cancel your email alert at anytime