Electrical Drafts Man Jobs - Medina Saudi

<strong>Job Purpose<br><br></strong>Carry out all operational activities through DCS and keep continuous controlling &amp; monitoring operating parameters and alarms of Desal/SWC and all related systems and take appropriate action to correct deviations to ensure continuity of operations and production of water and seawater supply in a safe and reliable manner.<br><br><strong>Key Duties &amp; Responsibility<br><br></strong><ul><li> Shift take over – review with outgoing shift control operator the activities of the previous shift such as, tripping, shut-downs, start-ups, deviations from normal operating standards, etc. to ensure that continuing problems are handled as necessary.</li><li> Review logbook from previous shift and fill log sheets and other assigned sheets to determine condition/status of each unit. Check parameters, alarms, unit load, take corrective action in respect of deviations according to established procedures and report to Shift supervisor for further advice and action.</li><li>Check and record readings, alarms, process parameters, electrical network etc. for plant/system/equipment and related auxiliaries and report abnormalities or deviations to shift supervisor for advice and further action.</li><li>Follow all relevant safety, quality and environmental control procedures and instructions so that personal safety of others is not jeopardized, and a minimum level of product/service and environmental impact can be guarantee.</li><li>Continuous monitoring for parameters and alarms of Desal/SWC and all related systems and take appropriate action to correct deviations to ensure continuity of operations and production of water and seawater</li><li>Conduct routine equipment/system check, all routine tests and change over, routine test in coordination with field operator, supervisor and all related parties, and fill/maintain record.</li><li>Coordinate/isolate with Field Operators and shift supervisor to resolve deviations from normal standards and problems on the plant electrical systems including isolation of equipment and auxiliaries, operating the electrical system, switching operation of the network.</li><li>Communicate and coordinate with all internal/external parties to maintain and control interfaces and resources supply such as water, seawater, steam, chemical, condensate return, process air etc.</li><li>Act and response to emergency situations; take appropriate steps to stabilize the problem as much as possible while simultaneously informing shift supervisor and other parties as indicated in the procedures to safeguard the unit.</li><li>Ensure compliance with regulations, standard and procedures, provide feedback and recommendation for improvement where necessary.</li><li>Maintain accurate and detailed reports including plant status, main activities and incidents and report any deviations, abnormalities, or issues and keep as a reference.</li><li>Participate and provide support to train new control room operator, insure knowledge and experience transfer to maintain high level of capability.</li><li>Maintain proper housekeeping in Control Room and insure all desk facility proper working.</li><li>Review and analyze laboratory reports to verify compliance with water quality standards, identify any deviations, and implement corrective actions as necessary.</li><li>Conduct regular assessments of equipment availability and prepare weekly reports outlining non-functional equipment, identifying underlying issues, and proposing solutions to ensure optimal operational efficiency.<br><br></li></ul><strong>Minimum Experience Requirements<br><br></strong><ul><li>4 years’ relevant plant operational experience in a large industrial environment for a Diploma holder, OR</li><li>6 – 8 years’ relevant plant operational experience in a large industrial environment for a High School graduate.</li><li>2 years’ Field Operator experience.<br><br></li></ul><strong>Professional Certification(s)<br><br></strong>N/A

<p>We are hiring Electrical Engineers (MEP) for a leading Facility Management Company. Candidates must hold a Bachelor s Degree in Engineering with 3 5 years of experience in MEP projects.</p>

<p>Lead PMC oversight of all construction activities and ensure effective project delivery.</p><p>Manage and monitor Contractor and CSC performance against contractual, technical, quality, schedule, and HSE requirements.</p><p>Ensure construction works comply with approved designs, specifications, standards, project programme, and quality requirements.</p><p>Oversee construction activities covering roads, wet utilities, dry utilities, electrical, telecommunications, street lighting, and firefighting infrastructure.</p><p>Review construction methodologies, sequencing, work plans, logistics, and site readiness.</p><p>Monitor construction progress, productivity, resources, and site constraints.</p><p>Lead coordination and management of multidisciplinary and package interfaces.</p><p>Coordinate with Planning, Commercial, Contracts, QA/QC, HSE, and Logistics functions.</p><p>Lead construction progress, coordination, and interface meetings with the Contractor, CSC, and relevant stakeholders.</p><p>Review and facilitate resolution of RFIs, technical queries, design issues, and constructability challenges.</p><p>Identify construction risks, monitor potential impacts, and ensure appropriate mitigation measures are implemented.</p><p>Monitor Contractor readiness for testing and commissioning activities.</p><p>Lead construction completion, inspections, snagging, close-out, and handover activities.</p><p>Monitor Contractor performance and provide timely recommendations to PMC and Client management.</p><p>Prepare construction performance reports, progress updates, and recommendations for the Client.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Civil Engineering or another relevant Engineering discipline.</p><p>15 22 years of total professional experience.</p><p>Proven experience managing major infrastructure, urban development, or mixed-use development projects.</p><p>Strong experience with Design &amp; Build (D&amp;B) infrastructure packages.</p><p>Previous experience with a reputable PMC or engineering consultancy is preferred.</p><p>Strong experience managing Contractors and Construction Supervision Consultants.</p><p>Proven experience in roads, utilities, electrical, telecommunications, street lighting, and related infrastructure works.</p><p>Strong knowledge of construction management, project coordination, quality, programme, HSE, and contractual requirements.</p><p>Excellent leadership, stakeholder management, communication, coordination, and problem-solving skills.</p><p>Saudi Council of Engineers registration is required/preferred as applicable to the project.</p>

<p>B.Tech/B.E. in Electrical/Electronics/Automation &amp; Instrumentation with 5+ years BMS/Controls experience in facilities management or large-scale buildings</p><p>Manage and maintain Building Management Systems in commercial, hospital, university, or large facility environments</p>

<p>Perform installation, calibration, testing, and maintenance of field instruments and control devices. Install pressure, temperature,</p><p><strong>Desired Candidate Profile</strong></p><p><b>Required Candidate profile</b></p><p>Diploma / ITI in Instrumentation<br>Total Exp Min 5 years, preferably 5 7 years, in electrical installation, testing, and maintenance</p><p>Aramco Exp must</p>

<p>Identify and troubleshoot basic mechanical and electrical issues. Ensure proper functioning of material handling equipment. Support loading, unloading, shifting, and storage of materials. Maintain proper arrangement and handling of inventory.</p><p><strong>Desired Candidate Profile</strong></p><p>Must Have Diploma in Mechanical or Chemical Engineering with Minimum 5 years experience.</p>

<p>Main Responsibilities:</p> <ul> <li>Supporting the contract in completion of planned project activities.</li> <li>Monitor project progress and ensure all activities are completed in the required timeline.</li> <li>Ensure Contractor obtains all required approvals for all project documentation.</li> <li>Manage all project internal and external interfaces.</li> <li>Update and review progress on a weekly basis and highlight areas of concern that require intervention.</li> <li>Prepare and issue weekly progress reports for projects.</li> <li>Prepare periodic slides for executive management presentation.</li> </ul> <p>Project management support</p> <ul> <li>Support Project Manager in project execution, field visits, and technical project review.</li> <li>Compile inputs to prepare project planning reports.</li> </ul> <p>Retrofit implementation support</p> <ul> <li>Support in supervising the ESCOs responsible for the design, installation, and commissioning of projects.</li> <li>Support in the Project Manager in managing the relationship with the Government entity.</li> </ul> <p>Post-retrofit support</p> <ul> <li>Support the supervision of O&amp;M services provided.</li> <li>Support the Project Manager in ensuring that the performance guarantees are satisfied.</li> </ul> <ul> <li>Liaise with Finance / Legal to resolve any issues.</li> </ul> <p> </p> <p><b>Qualifications</b></p> <p> </p> <ul> <li>Bachelor s degree in Electrical Engineering, or any related field</li> <li> </li> <li>CEM / CMVP certification is preferred.</li> </ul> <p> SEC designer or installer solar certification is preferred</p> <p> </p> <p>Experience &amp; Skills</p> <p> </p> <p> </p> <p>-Minimum of 4 years in a project management role with responsibility for the performance of contractors; preferably with retrofit experience within ESCO (or EPC) industry experience </p> <p> </p> <p>-Interpersonal: Professional proficiency of English required; fluency in Arabic is a must; effective communication skills (written and verbal); effective time management skills; ability to manage concurrent projects</p> <p> </p> <p> -Technical: Technical knowledge relating to building retrofits and potential savings</p> <p> </p> <p> </p><p><strong>Desired Candidate Profile</strong></p><h4>Qualifications</h4> <p> </p> <ul> <li>Bachelor s degree in Electrical Engineering, or any related field</li> <li> </li> <li>CEM / CMVP certification is preferred.</li> </ul> <p> SEC designer or installer solar certification is preferred</p> <p> </p> <p>Experience &amp; Skills</p> <p> </p> <p> </p> <p>-Minimum of 4 years in a project management role with responsibility for the performance of contractors; preferably with retrofit experience within ESCO (or EPC) industry experience </p> <p> </p> <p>-Interpersonal: Professional proficiency of English required; fluency in Arabic is a must; effective communication skills (written and verbal); effective time management skills; ability to manage concurrent projects</p> <p> </p> <p> -Technical: Technical knowledge relating to building retrofits and potential savings</p> <p> </p> <p> </p>

<p>We have been mandated by a global conglomerate is into "Iron &amp; Steel" manufacturing business. Position Title: Project Head (Slab Caster / Gas based DRI / LDP) Qualification: B.E. / B.Tech in Mechanical, Metallurgical, Electrical or Chemical Engineering. A PMP certification or equivalent project management qualification is an advantage. Experience: 18+ Yrs Location: Saudi Arabia Role Overview: To lead and deliver new capital projects at the plant - Slab Caster, Gas-Based DRI Plant and Lime Dolo Plant - from concept to commissioning, ensuring these are executed on time, within budget, and to the required quality and safety standards. Key Responsibilities: Own end-to-end project delivery for the Slab Caster, Gas-Based DRI Plant, and Lime Dolo Plant - from concept, feasibility and basic engineering through detailed engineering, procurement, construction and commissioning (concept to commissioning). Drive project planning: define scope, budget, schedule and manpower plan for each project; track progress against milestones and course-correct as needed. Coordinate with technology licensors, EPC contractors, OEMs and consultants to finalize process design, equipment specifications and execution methodology. Manage procurement and contracts in coordination with the commercial team - vendor selection, contract finalization, and expediting of critical equipment. Oversee site execution - civil, structural, mechanical, electrical and instrumentation works - ensuring quality, safety and statutory compliance at all times. Lead commissioning and stabilization of each unit, working closely with operations to ensure a smooth handover and ramp-up to rated capacity. Manage project budgets and capital expenditure; track costs against approved estimates and report variances to management. Build and lead the project team, including engineers and site supervisors; coordinate with cross-functional teams (operations, maintenance, safety, quality, finance). Provide regular project status reports and risk updates to senior management and the Board, as required.</p><p><strong>Desired Candidate Profile</strong></p><p>18-24 years of experience in the iron &amp; steel industry, with a track record of executing large capital projects such as Slab Caster, DRI (gas-based) and Lime/Dolomite calcination plants. Hands-on experience of at least one greenfield or brownfield project from concept stage to commissioning is essential. Strong knowledge of steel-making process technology, project engineering, EPC contract management and commissioning practices. Strong leadership, stakeholder management and communication skills; ability to work with multi-cultural teams and international contractors. Age up to 48 years.</p>

<p>Manage the planning &amp; processes of a project and delegate responsibilities to ensure the project is completed efficiently and successfully Conduct regular meetings with clients to ensure clarification and meet specific requirements in a timely manner</p><p><strong>Desired Candidate Profile</strong></p><p>Candidate should be B.E/B.Tech in any discipline Civil/Electrical/Mechanical Must have GCC exp. in oil and gas industry Must have driving license Must have valid passport Good Communication Skills</p>

<p> <strong>Position: E&amp;I Manager</strong> <br> <strong>Location:</strong> Saudi Arabia<br> <strong>Industry:</strong> Oil &amp; Gas</p> <br> <p>We are looking for an experienced E&amp;I Manager with a minimum of <strong>10+ years of experience in the Oil &amp; Gas industry</strong>. The candidate must have strong knowledge of electrical and instrumentation systems, project execution, installation, testing, commissioning, maintenance, and troubleshooting.</p> <br> <p>Experience in managing E&amp;I teams, ensuring compliance with project specifications, safety standards, and quality requirements is essential.</p>

<p>Responsibilities Perform general repair, maintenance, and troubleshooting of hotel facilities and equipment. Conduct routine inspections and preventive maintenance according to schedules. Monitor equipment readings and report abnormalities or required corrective actions. Attend to guest and departmental maintenance requests promptly and professionally. Assist other tradespersons and technicians with electrical, mechanical, plumbing, and general maintenance tasks. Ensure proper use and maintenance of tools and measuring instruments. Maintain clean, safe, and organized work areas while complying with safety regulations. Prepare maintenance logs, shift handovers, and reports as</p>

<p>Responsibilities Perform preventive maintenance, repair, and troubleshooting of laundry and kitchen equipment. Inspect equipment regularly and identify defects or potential breakdowns. Maintain and repair electrical, mechanical, and related equipment as required. Respond promptly to equipment breakdowns and urgent maintenance requests. Maintain proper operation, cleanliness, and safety of equipment and work areas. Keep maintenance logs and report equipment issues, readings, and required materials to supervisors. Assist other technicians and engineering staff when required. Follow hotel safety, hygiene, energy conservation, and maintenance standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualifications Male, at least 21</p>

<p> <strong>Job Purpose / Objective</strong> </p> <p>The MRO Technician ensures that the equipment performs at desired safety, quality, and productivity expectations. He/she utilizes operation knowledge and experience to provide technical and mechanical problem-solving to optimize run-time and productivity.</p> <p> <strong>Key Accountabilities</strong> </p> <ul> <li>Implement best practices for high-speed engine maintenance, repair, and overhaul, incorporating feedback from stakeholders</li> <li> Work with the different related teams to ensure daily MRO activities are meeting targets and minimize equipment downtime</li> <li> Monitor, troubleshoot, and adjust high-speed engines and associated equipment during complex maintenance, repair, and overhaul activities based on work process data within known boundaries</li> <li> Identify and implement process improvements to enhance efficiency, quality, and safety of engine MRO operations</li> <li> Monitor and analyze engine performance data to proactively address potential issues and optimize maintenance schedules</li> <li>Collaborate with the engineering and related teams to evaluate and test new tools, technologies, and techniques</li> <li>Ensure all maintenance, repair, and overhaul activities are completed in compliance with regulatory requirements, manufacturer specifications, and the organization's quality standards</li> <li> Document and share MRO insights, lessons learned, and recommended changes to continuously improve capabilities</li> </ul><p> <strong>Education </strong>Diploma in Electrical or Mechanical Maintenance or related field.</p> <p> <strong>Professional Qualifications </strong>N/A</p> <p> <strong>Competencies</strong> </p> <p> <strong>Technical Competencies:</strong> </p> <ul> <li> Extensive hands-on experience in the MRO of advanced, high-speed engines, with a deep understanding of engine systems, components, and failure modes</li> <li> Proficient in the use of advanced diagnostic tools, measurement equipment, and specialized tools for engine MRO, including borescopes, vibration analysis tools, and engine parameter monitoring systems</li> <li> Strong mechanical skills, able to repair and dismantle complex machinery and equipment, with experience in automated assembly setup</li> <li> Excellent analytical and problem-solving abilities to quickly identify root causes of complex issues and propose optimal, data-driven solutions</li> <li> Familiarity with maintenance management software, computerized maintenance systems, and data analysis techniques to interpret performance data and make informed decisions</li> <li> Proficient in MS Office Suite and ERP systems</li> <li> Thorough understanding of quality management principles, safety protocols, and regulatory requirements for engine MRO operations, including FAA, EASA, and OEM standards</li> <li> Effective communication skills to coordinate cross-functional teams</li> <li> Able to work independently with minimal supervision</li> <li> Skilled in reading and interpreting complex engine schematics, technical manuals, engineering drawings, and regulatory documents</li> </ul> <p> <strong>Behavioral Competencies:</strong> </p> <ul> <li> Adhering to principles and values</li> <li> Applying expertise and technology</li> <li> Following instructions and procedures</li> <li> Coping with pressures and setbacks</li> <li> Achieving personal work goals and objectives</li> </ul> <p> <strong>Experience </strong>Minimum of 3 years of experience in a relevant technician role in a related high-speed engine industry.</p> <p> <strong>Languages </strong>Good written and spoken English.</p><p><strong>Desired Candidate Profile</strong></p><strong>Education </strong>Diploma in Electrical or Mechanical Maintenance or related field.<br><strong>Professional Qualifications </strong>N/A

<p>Carry out preventive, predictive, and corrective maintenance on packing, flow-pack, weighing, labeling, conveyor, and sealing machinery. Diagnose and repair mechanical, electrical, pneumatic, sensor, and PLC/automation faults quickly to minimize downtime. Perform machine setup, calibration, alignment, and commissioning after repairs or modifications. Support operators with complex changeovers, adjustments, and technical issues. Complete planned preventive maintenance on schedule. Carry out root cause analysis on repeated breakdowns and implement permanent corrective actions. Monitor machine condition (vibration, wear, temperature, lubrication) and flag risks early. Manage spare parts usage and raise requests for critical and consumable spares. Maintain accurate records: breakdown logs, PM checklists, repair history, and spare consumption.</p>

<p>Free Requirement, Direct Client Interview@ Chennai -15-10-2026</p> <br> <p>JD:</p> <br> <p>* Should have Experience in MEP Products (Mechanical, Electrical, HVAC etc..)</p> <p>* SAP &amp; Ms office software is must</p> <p>* Gulf / Overseas Experience is Must</p> <p>* Excellent English Communication</p> <br> <p>Responsibilities &amp; duties </p> <br> <p>* Liaise with all relevant sections (O&amp;M) of the organization and vendors concerning purchasing and logistics operations. </p> <p>* Assisting vendor packages, and procurement schedules for material planning in all ongoing projects.</p> <p>* Assisting commercially and issue CBEs to obtain procurement engineer review and approval. </p> <p>* Check and ensure that all items in the Requisitions of Purchase are procured according to specifications. Negotiate commercial TCs with vendors and preserve best procurement performs. </p> <br>

<p>Develop and implement procurement strategies aligned with organizational objectives. Source and procure materials, equipment, and services required for water and wastewater projects. Manage end-to-end procurement activities, including RFQs, tendering, bid evaluation, negotiation, PO issuance, and contract management. Identify and qualify suppliers for pumps, valves, pipes, fittings, instrumentation, chemical dosing systems, filtration systems, membranes, electrical and mechanical equipment. Ensure timely procurement and delivery of materials to support project schedules. Establish and maintain strategic relationships with suppliers and contractors. Evaluate supplier performance based on quality, delivery, cost, and service. Negotiate pricing, payment terms, warranties, and contractual agreements. Develop supplier performance KPIs and conduct periodic reviews. Resolve supplier disputes and contractual issues effectively.</p>

<p>Develop and implement procurement strategies aligned with organizational objectives. Source and procure materials, equipment, and services required for water and wastewater projects. Manage end-to-end procurement activities, including RFQs, tendering, bid evaluation, negotiation, PO issuance, and contract management. Identify and qualify suppliers for pumps, valves, pipes, fittings, instrumentation, chemical dosing systems, filtration systems, membranes, electrical and mechanical equipment. Ensure timely procurement and delivery of materials to support project schedules. Establish and maintain strategic relationships with suppliers and contractors. Evaluate supplier performance based on quality, delivery, cost, and service. Negotiate pricing, payment terms, warranties, and contractual agreements. Develop supplier performance KPIs and conduct periodic reviews. Resolve supplier disputes and contractual issues effectively.</p>

<p>change color combination do ur best Add to FavoritesEdit convert naukir.com job post withour image Urgent Manpower Requirement Saudi Arabia Job Location: Shoibah, Bahrah, Saudi Arabia Employment Type: Full Time Candidate Location: Candidates currently residing in Saudi Arabia Nationality: Any Nationality Positions Available Helper / Ordinary Labour Mechanical Fitter Fabricator Carpenter Electrical Technician Process Operator Welder Cleaner Male/Female Steel Fixer Safety Officer Job Benefits Duty: 10 hours per day Food: Free 3 times daily Accommodation: Free good-quality accommodation</p><p><strong>Desired Candidate Profile</strong></p><p>Important Eligibility Candidates must already be in Saudi Arabia . Any nationality can apply. Relevant experience/documentation is required for skilled positions. Candidates without an experience letter will be considered only for Helper positions.</p>

<p>Parsons is seeking a highly skilled <b>Senior Planning Engineer</b> to join their team. This role involves developing a <b>Master Schedule that integrates multiple project packages, taking into account their interdependencies. The goal is to identify and assess how changes in one package affect others, while effectively managing client expectations and ensuring timely delivery.</b></p><br><p><b> What You'll Be Doing:</b></p><br><ul><li> Schedule Management: Develop and manage a Master Schedule integrating multiple packages, considering interdependencies to assess the impact of changes across project.</li></ul><ul><li> Project Controls: Develop, implement, and maintain project controls systems and tools, ensuring compliance and resolving planning issues as they arise.</li></ul><ul><li> Progress Monitoring: Evaluate and verify planning and scheduling information, identifying potential delays and suggesting mitigation measures.</li></ul><ul><li> Reporting and Communication: Prepare regular progress reports and presentations, addressing program issues to ensure timely project completion.</li></ul><ul><li> Claims and Dispute Resolution: Assess claims, including Extension of Time and Disruption, using leading delay analysis methodologies.</li></ul><ul><li> Team Leadership: Provide technical leadership and guidance to planning engineers, ensuring effective project controls processes and compliance.</li></ul><ul><li> Risk Management: Identify potential risks and conflicts, documenting them in the Project Risk Register, and conduct "what-if" analyses to assess time impacts of changes.</li></ul><ul><li> Coordinate and collaborate with other Senior Planning Engineers on other locations to develop a Master Schedule that integrates all the locations under this program.</li></ul><br><p><b> What Required Skills You'll Bring:</b></p><br><ul><li> Bachelor's degree in civil/mechanical/electrical engineering or construction management from a recognized institution.</li></ul><ul><li> Minimum 15+ years of experience in planning and scheduling building Projects</li></ul><ul><li> Successful applicants will have experience working on building projects coupled with an excellent overall understanding of the construction industry and interface and coordination requirements in the industry</li></ul><ul><li> Proficiency in scheduling software, particularly Primavera P6.</li></ul><br><p><b> What Desired Skills You'll Bring:</b></p><br><ul><li> Good written and oral communication skills</li></ul><ul><li> Management capabilities</li></ul><ul><li> GCC experiences preferred</li></ul><ul><li> Thorough knowledge of industry best practices and regulations.</li></ul><p>Parsons equally employs representation at all job levels no matter the race, color, religion, sex (including pregnancy), national origin, age, disability or genetic information.</p><p>We truly invest and care about our employee s wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest APPLY TODAY!</p><p>Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/ .</p><p><strong>Desired Candidate Profile</strong></p><ul><li> Bachelor's degree in civil/mechanical/electrical engineering or construction management from a recognized institution. </li></ul><ul><li> Minimum 15+ years of experience in planning and scheduling building Projects </li></ul><ul><li> Successful applicants will have experience working on building projects coupled with an excellent overall understanding of the construction industry and interface and coordination requirements in the industry </li></ul><ul><li> Proficiency in scheduling software, particularly Primavera P6. </li></ul><ul><li> Good written and oral communication skills </li></ul><ul><li> Management capabilities </li></ul><ul><li> GCC experiences preferred </li></ul><ul><li> Thorough knowledge of industry best practices and regulations. </li></ul>

<br> <ul> <li> IEC 61850 Configuration &amp; Testing Siemens / ABB / GE Relay Certification SCADA &amp; Substation Automation Cybersecurity (IEC 62351, NERC CIP, ISA/IEC 62443)</li> </ul> <br> <br> <p> <strong>Role &amp; responsibilities</strong> </p> <p>The Substation Automation Engineer is responsible for designing, configuring, and commissioning Substation Automation Systems (SAS) in compliance with IEC 61850 and related protocols. The role covers Power System Protection, Automation &amp; Control including SCADA, RTU, PLC, Power Monitoring Systems (PMS) and IEDs integrating these systems with utilities and OEM vendors for high-voltage substations. </p> <br><p><strong>Desired Candidate Profile</strong></p><p> <strong>Preferred candidate profile</strong> </p> <br> <br> <ul> <li> Bachelor's Degree in Electrical/Electronics Engineering, Power Systems, Communications, or Computer Systems Engineering (Master's preferred) </li> </ul> <p>Certified professional courses preferred: CCNA, CCNP, MCP, MCTS, or equivalent in applications software, database/network administration, and LAN/WAN/ATM installation &amp; configuration </p> <br> <br>