- Jubail Saudi
16 Jobs Found
Save and set alert for similar positionsManage alerts
SECTION I: Job Summary <br><br>The QC Inspector - Mechanical performs inspection and testing of mechanical equipment installation activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on mechanical equipment installation works (pumps, vessels, packages, structural skids) Verify equipment installation, alignment, and grouting against approved drawings and vendor specifications Witness mechanical running tests, alignment checks, and equipment box-up activities per the ITP Verify materials and equipment against material certificates, vendor data, and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for mechanical works Ensure work fronts comply with approved method statements and mechanical equipment standards Support preparation of quality documentation for mechanical handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Mechanical Equipment Inspection Techniques Reading Mechanical/Equipment Drawings & Vendor Data Equipment Alignment & Grouting Inspection Inspection & Test Plans (ITPs) Measuring & Alignment Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on mechanical equipment installation projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical Engineering QC/inspection certification preferred
<h2 ><span lang="ar" dir="rtl">إعلان الشركة العالمية للصناعات البحرية عن وظائف في مختلف المجالات الإدارية والفنية والتقنية والهندسية</span></h2><h3 ><span lang="ar" dir="rtl">المسميات الوظيفية:</span></h3><ul><li><p ><span lang="ar" dir="rtl">مفتش مراقبة الجودة الهيكلية</span></p></li><li><p ><span lang="ar" dir="rtl">مراقب التكاليف</span></p></li><li><p ><span lang="ar" dir="rtl">مفتش أول مراقبة الجودة الميكانيكية</span></p></li><li><p ><span lang="ar" dir="rtl">مفتش أول مراقبة جودة اللحام</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف قسم اللحام</span></p></li><li><p ><span lang="ar" dir="rtl">مسؤول الإنتاج</span></p></li><li><p ><span lang="ar" dir="rtl">منسق تصاريح العمل</span></p></li><li><p ><span lang="ar" dir="rtl">منسق المواد</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي عقود</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس إنتاج</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف قسم الأنابيب</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف ورشة الهياكل</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف قسم الميكانيكا</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف قسم الكهرباء</span></p></li><li><p ><span lang="ar" dir="rtl">منسق أول تصريح عمل</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف التشغيل الميكانيكي</span></p></li><li><p ><span lang="ar" dir="rtl">مراقب إدارة الإنتاج</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس إنتاج ميكانيكي</span></p></li><li><p ><span lang="ar" dir="rtl">مفتش أول مراقبة جودة الطلاء</span></p></li><li><p ><span lang="ar" dir="rtl">مدير خدمات الدعم</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس تخطيط</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس إنتاج</span></p></li><li><p ><span lang="ar" dir="rtl">مشرف أول تجهيز الأعمال الإنشائية</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي فحص الأصول</span></p></li><li><p ><span lang="ar" dir="rtl">مهندس أنابيب الإنتاج</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي عمليات لوجستية</span></p></li><li><p ><span lang="ar" dir="rtl">محلل علاقات الموردين</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي فحص الأصول الكهربائية</span></p></li><li><p ><span lang="ar" dir="rtl">أخصائي فحص الأصول الميكانيكية</span></p></li><li><p ><span lang="ar" dir="rtl">(وظائف أخرى)</span></p></li></ul><h3 ><span lang="ar" dir="rtl">التخصصات المطلوبة:</span></h3><ul><li><p ><span lang="ar" dir="rtl">إدارة الأعمال</span></p></li><li><p ><span lang="ar" dir="rtl">إدارة العمليات</span></p></li><li><p ><span lang="ar" dir="rtl">إدارة سلاسل الإمداد</span></p></li><li><p ><span lang="ar" dir="rtl">الأمن</span></p></li><li><p ><span lang="ar" dir="rtl">هندسة الأمن</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة الميكانيكية</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة الكهربائية</span></p></li><li><p ><span lang="ar" dir="rtl">الهندسة</span></p></li><li><p ><span lang="ar" dir="rtl">(تخصصات أخرى)</span></p></li></ul><h3 ><span lang="ar" dir="rtl">الشروط:</span></h3><ul><li><p ><span lang="ar" dir="rtl">أن يكون المتقدم حاصل على المؤهلات والخبرات الموضحة في الوصف الوظيفي.</span></p></li><li><p ><span lang="ar" dir="rtl">إجادة اللغة الإنجليزية تحدثاً وكتابة.</span></p></li><li><p ><span lang="ar" dir="rtl">القدرة على العمل تحت الضغط وساعات إضافية (مع التعويض).</span></p></li></ul><h3 ><span lang="ar" dir="rtl">لمحة عن الشركة العالمية للصناعات البحرية:</span></h3><p ><span lang="ar" dir="rtl">الشركة العالمية للصناعات البحرية (IMI) مشروع مشترك بين أرامكو السعودية وشركة لامبريل بي إل سي والشركة الوطنية للنقل البحري وشركة هيونداي للصناعات الثقيلة المحدودة، يقدم المشروع واحداً من أكبر المجمعات البحرية المتكاملة الخدمات في العالم عند إكتمال مراحل التشغيل في عام 2022م، ويقع المجمع في رأس الخير قرب مدينة الجبيل الصناعية.</span></p>
<h3>About the Role</h3><p>Abdul Latif Jameel is seeking a <strong>Toyota Technician</strong> to join their team in Al Jubail, Eastern region. This full-time role involves performing mechanical repair services and related tasks to achieve customer satisfaction and service sales targets, adhering to company standards and operating procedures. The position requires 0-1 years of experience.</p><h3>Key Responsibilities</h3><ul><li>Perform mechanical repairs as per customer requests, under the supervision of a Chief Technician, ensuring work is completed within promised delivery times and estimated costs.</li><li>Conduct preliminary vehicle inspections and evaluations using appropriate tools and equipment to assess damage and repair scope.</li><li>Participate in resolving high-technical problems with assistance from Team Leaders (Workshop Production Manager/Chief Technician) through testing and examination.</li><li>Execute after-sales responsibilities, including vehicle repairs and periodic maintenance, in accordance with company policies and procedures.</li><li>Ensure high customer satisfaction by adopting a guest-centric mindset and monitoring after-sales activities against service standards.</li><li>Coordinate with the Job Controller to input correct data, record repairs, and update vehicle delivery status using computerized time control sheets for productivity analysis.</li><li>Receive and understand technical information, service bulletins, and daily functional activities from the Team Leader through regular meetings and updates.</li><li>Support and assist in after-sales marketing campaigns, promote Kaizen activities, and adapt to business strategies to achieve center targets.</li><li>Ensure proper use of all service facilities, tools, and equipment, adhering to safety, welfare, integrity, and branding policies.</li><li>Execute assigned activities according to company standard operating procedures, coordinating with service teams to achieve operational targets.</li></ul><h3>Performance Expectations</h3><ul><li>Produce standard sold hours versus attending hours.</li><li>Complete jobs accurately and efficiently on the first attempt.</li><li>Ensure work quality by following TMC standards and using correct tools.</li><li>Maintain a clean and organized workplace by adhering to the 5S concept (Sorting, Set in Order, Shine, Standardize, Sustain).</li></ul><h3>Impact of the Role</h3><p>This position directly influences sold working hours and has a significant impact on overall customer satisfaction within the service center.</p><h3>Required Qualifications</h3><ul><li>0-1 years of experience in a relevant field.</li><li>Ability to implement Abdul Latif Jameel and TMC Policies and Standard Operating Procedures related to service.</li><li>Adherence to Service Operation compliance policies.</li><li>Familiarity with Mechanical Kodawari principles.</li></ul><h3>Work Type</h3><p>This is a full-time position based in Al Jubail.</p>
SECTION I: Job Summary <br><br>The QA/QC Supervisor oversees day-to-day quality control activities across all site disciplines, supervising QC Inspectors, coordinating inspection and test plan execution, and ensuring consistent application of quality standards and procedures.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Supervise and coordinate the daily activities of QC Inspectors across all disciplines Ensure inspections, tests, and hold points are executed per approved Inspection & Test Plans (ITPs) Review daily QC inspection reports and ensure timely, accurate documentation Coordinate hold point notifications and inspection scheduling with client/third-party inspectors Support the QC Manager in managing the Non-Conformance Report (NCR) process and corrective actions Conduct quality walkdowns and spot-check inspections across active work fronts Verify calibration and control of inspection and test equipment used by the QC team Coordinate training and technical guidance for QC Inspectors on inspection procedures and standards Liaise with construction supervision to resolve quality-related work front issues Support preparation and compilation of quality documentation for handover dossiers Report quality performance, trends, and issues to the QC Manager Support internal quality audits and readiness for client/third-party audits<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Number and severity of non-conformances (NCRs) Inspection schedule/hold point compliance First-time inspection pass rate across disciplines Timely closure of NCRs and punch-list items Quality of QC team documentation and reporting<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Leadership Attention to Detail Analytical Thinking Communication Skills Decision Making Accountability<br><br>Technical Skills<br><br> Quality Management Systems (ISO 9001) Inspection & Test Plan (ITP) Coordination Multidiscipline Inspection Standards Awareness NCR & Corrective Action Management QC Team Supervision & Scheduling Reading Technical Drawings & Specifications (multidiscipline)<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 8-10 years of experience in quality control on EPC/industrial construction projects, including supervisory experience<br><br>Education<br><br> Bachelor's degree in Engineering (Civil/Mechanical) or a related field QC/inspection certification preferred
SECTION I: Job Summary <br><br>The QC Inspector - Piping (UG) performs inspection and testing of underground piping installation activities, including trenching, bedding, coating, and backfill, to verify compliance with drawings, specifications, and applicable codes.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on underground piping installation works Witness trench excavation, pipe bedding, coating/wrapping, and backfill activities per the ITP Verify underground pipe alignment, depth, and joint integrity against approved drawings Witness hydrotests, holiday testing (coating integrity), and cathodic protection checks as required Verify materials (pipe, coating, bedding material) against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors prior to backfill Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for underground piping works Support preparation of quality documentation for underground piping handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances Hold point compliance prior to backfill Adherence to inspection schedules Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Underground Piping Inspection Techniques Trenching, Bedding & Backfill Inspection Coating/Wrapping & Holiday Testing Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on underground piping/utilities construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical/Civil Engineering QC/inspection certification preferred
SECTION I: Job Summary <br><br>The QC Inspector - Fireproofing performs inspection and testing of passive fireproofing application activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on fireproofing application works Verify surface preparation, primer, and fireproofing material application against specifications Witness thickness (DFT/WFT) checks and adhesion tests per the ITP Verify materials and batch certificates against approved specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment (thickness gauges) used on site Support punch-list generation and verification of closure for fireproofing works Ensure work fronts comply with approved method statements and fireproofing standards Support preparation of quality documentation for fireproofing handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Fireproofing/Passive Fire Protection Inspection Techniques Surface Preparation & Coating Application Standards Thickness (DFT/WFT) & Adhesion Testing Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on fireproofing/coating application projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical/Civil Engineering NACE/coating inspection certification preferred
<h3 >About the Role</h3>
<p >Shanahan Engineering is seeking a <strong >Commissioning Mechanical Specialist (Rotating equipment)</strong> for a large refinery commissioning project. This is a contract position located in Al Jubail, Eastern region, Saudi Arabia, requiring over 10 years of experience.</p>
<h3 >Role Purpose</h3>
<p >The primary function of the Commissioning Rotating Specialist is to ensure that all pre-commissioning and commissioning activities for rotating disciplines are prepared and executed according to the OPERCOM® methodology. This role emphasizes safety and adherence to the planned schedule for the project.</p>
<h3 >Key Responsibilities</h3>
<ul >
<li >Prioritizing Health, Safety, and Environment (HSE) in all activities.</li>
<li >Coordinating and approving the quality and completeness of project deliverables.</li>
<li >Assisting Commissioning Unit leaders in witnessing and monitoring pre-commissioning and commissioning activities.</li>
<li >Reviewing pre-commissioning dossiers to ensure accuracy and completeness.</li>
<li >Ensuring the proper care and maintenance of equipment by the EPCC Contractor.</li>
<li >Monitoring all rotating equipment commissioning activities.</li>
<li >Reviewing and providing comments on operational test procedures.</li>
<li >Liaising with other teams to facilitate a smooth transition from the commissioning to the start-up phase.</li>
</ul>
<h3 >Qualifications and Experience</h3>
<ul >
<li >Engineer level education or higher.</li>
<li >Extensive knowledge of rotating equipment activities within a petrochemical site.</li>
<li >Familiarity with EPCC contract management, OPERCOM®, and ICAPS®.</li>
<li >A minimum of 10 years of experience in relevant fields.</li>
<li >Broad experience covering both rotating equipment and HVAC systems.</li>
</ul>
<h3 >Required Skills</h3>
<ul >
<li >Methodical and organized approach to work.</li>
<li >Strong team spirit and ability to collaborate effectively.</li>
</ul>
<h3 >Work Type and Location</h3>
<p >This is a contract position based in Al Jubail, Eastern, Saudi Arabia. Salary details will be disclosed during the application process.</p>
SECTION I: Job Summary <br><br>The QC Inspector - Piping performs inspection and testing of piping fabrication and installation activities to verify compliance with isometrics, welding procedures, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on piping fabrication and installation works Witness hydrotests, NDE activities (RT/UT/PT/MT), and other required tests per the ITP Verify pipe fit-up, alignment, and welding against approved isometrics and WPS Verify materials, spools, and fittings against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for piping works Ensure work fronts comply with approved method statements and piping codes (ASME B31.3) Support preparation of quality documentation for piping handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time weld/inspection acceptance rate Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities<br><br>Core Competencies<br><br> Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Piping Inspection Techniques Reading Isometrics, P&IDs & Welding Maps Welding Inspection & NDE Awareness (RT/UT/PT/MT) Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education<br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on piping construction/fabrication projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical Engineering QC/inspection certification (e.g., CSWIP, CWI) preferred<br><br>SECTION VI: LEVEL OF AUTHORITY<br><br>Supervisory / Managerial: No supervisory responsibility.<br><br>Financial: No financial or budget authority.<br><br>SECTION VII: MISCELLANEOUS JOB-SPECIFIC REQUIREMENTS<br><br>General Profile / Specifications:<br><br> Field-based role requiring daily presence on active piping work fronts Exposure to site/construction conditions May require shift work or extended hours to cover inspection hold points
Eram Talent is hiring for a Mechanical Manitenance Engineer - HVAC with core experience in Petrochemical Plants. The candidate would be responsible for maintaining the reliability, availability, and performance of HVAC and Mechanical Refrigeration Units (MRUs) serving critical petrochemical facilities. Leads preventive and predictive maintenance programs, troubleshooting activities, root cause investigations, reliability improvement initiatives, and spare parts optimization to ensure safe and uninterrupted operation. Key Responsibilities· Extensive experience in maintaining, troubleshooting, and optimizing HVAC, chiller, and industrial refrigeration systems in petrochemical and process plant environments.· Hands-on expertise with Mechanical Refrigeration Units (MRUs), centrifugal, screw, and reciprocating chillers, AHUs, package units, ventilation systems, compressors, condensers, evaporators, pumps, and refrigeration control systems.· Diagnose and resolve mechanical, electrical, instrumentation, refrigeration, and control-related failures to ensure maximum equipment availability and reliability.· Analyze operating parameters including temperature, pressure, flow, superheat, subcooling, and compressor performance to identify system abnormalities and implement corrective actions.· Perform equipment performance evaluations, condition assessments, and reliability improvements to minimize downtime and optimize energy efficiency.· Proficient in interpreting HVAC/refrigeration schematics, P&IDs, electrical drawings, and OEM technical documentation.· Experienced in Building Management System (BMS) and HVAC control systems, including monitoring equipment performance, troubleshooting control logic, analyzing alarms, optimizing system operation, and integrating HVAC assets with centralized monitoring and control platforms. Perform RCI investigations for critical and repetitive equipment failures. Implement corrective and preventive actions to improve equipment reliability. Preventive & Predictive Maintenance Develop and optimize preventive maintenance programs based on equipment criticality and reliability data. Ensure timely completion of maintenance plans and work orders. Spare Parts Management Review and optimize HVAC spare parts inventory. Identify critical and insurance spare parts requirements. Establish minimum and maximum inventory levels based on risk and lead times. Coordinate with procurement and warehouse teams to ensure spare availability. Support obsolescence management and spare part standardization initiatives. Safety & Compliance Ensure compliance with company safety regulations and engineering standards. Participate in PSSR, risk assessments, and incident investigations when required. Support process safety requirements related to HVAC systems serving critical occupied buildings.<br><br>Requirements<br><br>Minimum of 10 years experience in petrochemical, refinery, oil & gas Bachelor Degree in Engineering HVAC, Chillers & Industrial Refrigeration Systems Maintenance & Troubleshooting MRU Operation and Maintenance Reliability Engineering Preventive & Predictive Maintenance RCISpare Parts Optimization Building Management Systems (BMS)
Eram Talent is hiring for a Mechanical Manitenance Engineer - HVAC with core experience in Petrochemical Plants. The candidate would be responsible for maintaining the reliability, availability, and performance of HVAC and Mechanical Refrigeration Units (MRUs) serving critical petrochemical facilities. Leads preventive and predictive maintenance programs, troubleshooting activities, root cause investigations, reliability improvement initiatives, and spare parts optimization to ensure safe and uninterrupted operation. Key Responsibilities· Extensive experience in maintaining, troubleshooting, and optimizing HVAC, chiller, and industrial refrigeration systems in petrochemical and process plant environments.· Hands-on expertise with Mechanical Refrigeration Units (MRUs), centrifugal, screw, and reciprocating chillers, AHUs, package units, ventilation systems, compressors, condensers, evaporators, pumps, and refrigeration control systems.· Diagnose and resolve mechanical, electrical, instrumentation, refrigeration, and control-related failures to ensure maximum equipment availability and reliability.· Analyze operating parameters including temperature, pressure, flow, superheat, subcooling, and compressor performance to identify system abnormalities and implement corrective actions.· Perform equipment performance evaluations, condition assessments, and reliability improvements to minimize downtime and optimize energy efficiency.· Proficient in interpreting HVAC/refrigeration schematics, P&IDs, electrical drawings, and OEM technical documentation.· Experienced in Building Management System (BMS) and HVAC control systems, including monitoring equipment performance, troubleshooting control logic, analyzing alarms, optimizing system operation, and integrating HVAC assets with centralized monitoring and control platforms. Perform RCI investigations for critical and repetitive equipment failures. Implement corrective and preventive actions to improve equipment reliability. Preventive & Predictive Maintenance Develop and optimize preventive maintenance programs based on equipment criticality and reliability data. Ensure timely completion of maintenance plans and work orders. Spare Parts Management Review and optimize HVAC spare parts inventory. Identify critical and insurance spare parts requirements. Establish minimum and maximum inventory levels based on risk and lead times. Coordinate with procurement and warehouse teams to ensure spare availability. Support obsolescence management and spare part standardization initiatives. Safety & Compliance Ensure compliance with company safety regulations and engineering standards. Participate in PSSR, risk assessments, and incident investigations when required. Support process safety requirements related to HVAC systems serving critical occupied buildings.<br><br>Requirements<br><br>Minimum of 10 years experience in petrochemical, refinery, oil & gas Bachelor Degree in Engineering HVAC, Chillers & Industrial Refrigeration Systems Maintenance & Troubleshooting MRU Operation and Maintenance Reliability Engineering Preventive & Predictive Maintenance RCISpare Parts Optimization Building Management Systems (BMS)
<h3 >About the Role</h3>
<p >Eram Talent is seeking a <strong >Mechanical Maintenance Engineer specializing in HVAC</strong> with core experience in petrochemical plants. This contract position is based in Al Jubayl, Saudi Arabia. The successful candidate will be responsible for maintaining the reliability, availability, and performance of HVAC and Mechanical Refrigeration Units (MRUs) that serve critical petrochemical facilities.</p> <h3 >Key Responsibilities</h3>
<p >The role involves leading preventive and predictive maintenance programs, troubleshooting activities, and reliability improvement initiatives. Specific responsibilities include:</p>
<ul >
<li >Maintaining, troubleshooting, and optimizing HVAC, chiller, and industrial refrigeration systems within petrochemical and process plant environments.</li>
<li >Diagnosing and resolving mechanical, electrical, instrumentation, refrigeration, and control-related failures to ensure maximum equipment availability and reliability.</li>
<li >Analyzing operating parameters, including temperature, pressure, flow, superheat, subcooling, and compressor performance, to identify system abnormalities and implement corrective actions.</li>
<li >Performing equipment performance evaluations, condition assessments, and reliability improvements to minimize downtime and optimize energy efficiency.</li>
<li >Conducting Root Cause Investigation (RCI) for critical and repetitive equipment failures and implementing corrective and preventive actions.</li>
</ul> <h3 >Technical Expertise</h3>
<p >Candidates must possess hands-on expertise with a range of equipment and systems, including:</p>
<ul >
<li >Mechanical Refrigeration Units (MRUs), centrifugal, screw, and reciprocating chillers, AHUs, package units, ventilation systems, compressors, condensers, evaporators, and pumps.</li>
<li >Refrigeration control systems and Building Management Systems (BMS), including monitoring equipment performance, troubleshooting control logic, analyzing alarms, optimizing system operation, and integrating HVAC assets with centralized monitoring and control platforms.</li>
<li >Proficiency in interpreting HVAC/refrigeration schematics, P&IDs, electrical drawings, and OEM technical documentation.</li>
</ul> <h3 >Maintenance Program Development</h3>
<p >The engineer will be responsible for developing and optimizing maintenance strategies to ensure operational efficiency:</p>
<ul >
<li >Developing and optimizing preventive maintenance programs based on equipment criticality and reliability data.</li>
<li >Ensuring the timely completion of maintenance plans and work orders.</li>
</ul> <h3 >Spare Parts Management</h3>
<p >This role includes optimizing spare parts inventory to support uninterrupted operations:</p>
<ul >
<li >Reviewing and optimizing HVAC spare parts inventory.</li>
<li >Identifying critical and insurance spare parts requirements.</li>
<li >Establishing minimum and maximum inventory levels based on risk and lead times.</li>
<li >Coordinating with procurement and warehouse teams to ensure spare part availability.</li>
<li >Supporting obsolescence management and spare part standardization initiatives.</li>
</ul> <h3 >Safety and Compliance</h3>
<p >Adherence to safety regulations and engineering standards is a critical aspect of this position:</p>
<ul >
<li >Ensuring compliance with company safety regulations and engineering standards.</li>
<li >Participating in Pre-Startup Safety Reviews (PSSR), risk assessments, and incident investigations when required.</li>
<li >Supporting process safety requirements related to HVAC systems serving critical occupied buildings.</li>
</ul> <h3 >Experience Requirements</h3>
<p >A minimum of <strong >5 to 10 years of experience</strong> in mechanical maintenance, specifically with HVAC systems in petrochemical or similar heavy industrial environments, is required for this role.</p>
SECTION I: Job Summary <br><br>The QC Inspector - Insulation performs inspection and testing of thermal/mechanical insulation and cladding installation activities to verify compliance with drawings, specifications, and applicable standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on insulation and cladding installation works Verify insulation material, thickness, and installation method against approved specifications Witness moisture barrier, banding, and cladding installation checks per the ITP Verify materials and batch certificates against approved specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for insulation works Ensure work fronts comply with approved method statements and insulation standards Support preparation of quality documentation for insulation handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Insulation & Cladding Inspection Techniques Insulation Material & Thickness Verification Weatherproofing/Cladding Installation Standards Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on insulation/cladding application projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical Engineering QC/inspection certification preferred
SECTION I: Job Summary <br><br>The QC Inspector - Coating performs inspection and testing of surface preparation and protective coating/painting activities to verify compliance with drawings, specifications, and applicable standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on surface preparation and coating/painting works Verify surface preparation (blasting profile, cleanliness) against specifications (e.g., SSPC/NACE standards) Witness coating application, DFT/WFT checks, holiday testing, and adhesion tests per the ITP Verify environmental conditions (humidity, dew point, temperature) prior to coating application Verify materials and batch certificates against approved coating specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment (gauges, holiday detectors) used on site Support punch-list generation and verification of closure for coating works Support preparation of quality documentation for coating handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Coating/Painting Inspection Techniques Surface Preparation Standards (SSPC/NACE) DFT/WFT, Holiday & Adhesion Testing Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on coating/painting application projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical/Civil Engineering NACE/coating inspection certification (e.g., NACE Level II) preferred
<h3 >Piping Commissioning Supervisor at Shanahan Engineering</h3>
<p >Shanahan Engineering is seeking a <strong >Piping Commissioning Supervisor</strong> for a contract position in Al Jubail, Eastern Province. This role focuses on ensuring all piping commissioning activities are prepared and executed safely and efficiently, adhering to the OPERCOM® methodology and project schedules.</p>
<h3 >Role Overview</h3>
<p >The primary function of the Piping Commissioning Supervisor is to manage and oversee all commissioning activities related to piping disciplines. This position requires close coordination with various project entities, including the Interface department, Integration team, Construction, and Project Services, to ensure seamless transitions throughout the project lifecycle.</p>
<h3 >Key Responsibilities</h3>
<ul >
<li >Prioritize Health, Safety, and Environment (HSE) in all piping activities.</li>
<li >Ensure all piping personnel receive adequate training and comply with job instructions.</li>
<li >Coordinate, review, and approve the quality and completeness of deliverables and procedures for piping activities.</li>
<li >Assist the Commissioning Unit leader in witnessing and monitoring commissioning activities.</li>
<li >Review commissioning progress and ensure smooth transitions from the commissioning to the start-up phase.</li>
</ul>
<h3 >Qualifications and Experience</h3>
<ul >
<li >Engineer level or equivalent education.</li>
<li >High knowledge of piping activities within a petrochemical site.</li>
<li >Minimum of <strong >10 years of experience</strong> in a similar piping commissioning or construction position.</li>
<li >Minimum of <strong >10 years of experience</strong> in piping and mechanical pre-commissioning and commissioning.</li>
</ul>
<h3 >Work Type and Location</h3>
<p >This is a <strong >contract position</strong> located in <strong >Al Jubail, Eastern Province</strong>. The role requires a dedicated professional to contribute to critical project phases within a petrochemical environment.</p>
<h3 >Application Process</h3>
<p >Interested candidates who meet the specified qualifications are encouraged to apply. Salary details will be discussed during the interview process.</p>
<h3 >About Tasnee and the Role</h3>
<p >Tasnee (National Industrialization Co.) is seeking a <strong >Sr Planner IV, TAM planning</strong>, for a full-time position located in Al Jubail, KSA. This role is integral to the efficient execution of major Turnaround maintenance activities within the company's operations.</p> <h3 >Role Overview</h3>
<p >The Sr Planner IV, TAM planning, is responsible for the comprehensive planning and preparation of major Turnaround (TAM) maintenance activities. This involves managing the entire lifecycle from initial scope definition through to project closeout, ensuring meticulous organization and adherence to operational standards.</p> <h3 >Key Responsibilities</h3>
<ul >
<li >Extract TAM priority work orders from SAP, compile a Work List, and facilitate review with the TAM core group.</li>
<li >Develop and approve the initial scope, managing and presenting any scope changes or additions.</li>
<li >Collaborate with the Maintenance Supervisor to prepare detailed contractor scopes and initiate Purchase Requisitions (PRs).</li>
<li >Create and route job packages for review and approval processes.</li>
<li >Utilize Primavera to develop, monitor, and manage Pre-TAM and Execution schedules, including decommissioning and commissioning phases.</li>
<li >Conduct schedule review meetings, finalize the schedule, and ensure its publication at least four months prior to execution.</li>
<li >Incorporate additional jobs before baseline, issue look-ahead schedules, and track Key Performance Indicators (KPIs) and overall progress.</li>
<li >Monitor compliance of P–P duration and report any deviations on a monthly basis.</li>
<li >Provide daily status reports, facilitate shift-based meetings, and recommend corrective actions.</li>
<li >Ensure proper closeout of TAM activities, including confirming Technical Completion (TECO), archiving feedback, and managing material returns.</li>
<li >Arrange for the refurbishment of spare components and equipment.</li>
<li >Schedule and facilitate TAM critique meetings post-commissioning, compiling all observations.</li>
<li >Prepare the final TAM Closeout Report, detailing inspection results and major achievements.</li>
<li >Comply with all company safety procedures and regulations.</li>
</ul> <h3 >Qualifications and Experience</h3>
<ul >
<li >Bachelor's degree in Mechanical Engineering.</li>
<li >A minimum of <strong >5 years of experience</strong> in the maintenance field.</li>
</ul> <h3 >Work Environment</h3>
<p >This is a full-time position based in <strong >Al Jubail, KSA</strong>, requiring dedicated on-site presence to manage critical turnaround planning activities.</p> <h3 >Application</h3>
<p >If you meet the qualifications and are ready to contribute to a leading industrial company, we encourage you to apply.</p>
<h3 >About the Company and Role</h3>
<p >Chevron Phillips Chemical Company, in partnership with Saudi Industrial Investment Group (SIIG) through Arabian Chevron Phillips Petrochemical Company (ACP), operates two 50/50 joint ventures in Al Jubayl, Saudi Arabia: Saudi Chevron Phillips Company (SCP) and Jubail Chevron Phillips Company (JCP). A third joint venture, Saudi Polymers Company (SPCo), is jointly owned by ACP and National Petrochemical Company (Petrochem). We are seeking a <strong >Process Operator</strong> to join our team in Al Jubayl.</p>
<h3 >Job Purpose</h3>
<p >The Process Operator is responsible for operating and maintaining plant equipment to achieve company production objectives. This full-time role emphasizes safe, cost-effective, and reliable operations, aligning with daily operating plans and quality standards.</p>
<h3 >Key Responsibilities</h3>
<ul >
<li >Comply with all EHS policies and procedures, applying risk control measures to ensure safe work activities.</li>
<li >Take responsibility for the safety of all personnel within the assigned work area, adhering to safety precautions, practices, and procedures.</li>
<li >Review new procedures with the console operator to ensure safe methods are applied and take corrective action for unsafe acts.</li>
<li >Operate plant equipment safely and correctly to achieve production objectives in line with operating plans and quality standards.</li>
<li >Assist in basic frontline maintenance, process sampling, and testing.</li>
<li >Support basic troubleshooting during all modes of operation, including process upset conditions.</li>
<li >Assist in preparing process equipment and work areas for mechanical, maintenance, and turnaround activities.</li>
<li >Monitor plant equipment performance and process conditions, including reading flow meters, temperature and pressure gauges, and taking routine readings on process variables.</li>
<li >Follow Standard Operating Procedures for all process operations.</li>
<li >Maintain close communication with the shift leader and head operator to ensure awareness of activities and status.</li>
<li >Develop and utilize knowledge for hazard identification and mitigation to effectively and safely prepare equipment for handover to Maintenance.</li>
<li >Follow up and implement the weekly PM/CM maintenance schedule.</li>
<li >Participate in Job Safety Analysis.</li>
<li >Adhere strictly to established environmental, health, safety, and quality policies and procedures.</li>
<li >Undertake accountabilities in the operational excellence process as outlined in the schedule of responsibilities.</li>
<li >Contribute to continuous improvement processes for the assigned area.</li>
<li >Perform other relevant tasks as directed by the Shift Leader.</li>
</ul>
<h3 >Qualifications and Experience</h3>
<ul >
<li >Diploma degree required.</li>
<li >A minimum of 2 years of experience in plant operations.</li>
</ul>
<h3 >Required Skills</h3>
<ul >
<li >Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.</li>
<li >Ability to write reports, business correspondence, and procedure manuals.</li>
<li >Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public.</li>
</ul>
<h3 >Company Context</h3>
<p >S-Chem is recognized as a pioneer in developing the industrial foundation of the Kingdom of Saudi Arabia, particularly within the petrochemical industry. The company aims to lead private sector investment in this field.</p>
Receive email alerts for jobs
You can cancel your email alert at anytime