وظائف مهندس ديكور - الجبيل السعودية

<h3>About Seder Group</h3><p>Seder Group is a prominent Saudi organization that delivers integrated services across various sectors throughout the Kingdom of Saudi Arabia. The group is dedicated to providing excellence, innovation, and sustainable solutions that support the Kingdom's ongoing growth and development.</p><h3>The Role of Senior Traffic Safety Engineer</h3><p>Seder Group is seeking a <strong>Senior Traffic Safety Engineer</strong> to join its team in Al Jubail, Eastern Province. This full-time role involves leading traffic safety initiatives, conducting comprehensive safety analyses, and managing the electrical design for various traffic infrastructure projects. The position requires a professional with over 10 years of experience in traffic safety, signals, and lighting.</p><h3>Key Responsibilities</h3><ul><li>Lead the roadway safety program, including crash data analysis, network screening, hot-spot identification, and countermeasure selection.</li><li>Conduct and lead road safety audits and safety studies, preparing recommendations backed by crash modification factors and benefit-cost analysis.</li><li>Prepare and manage applications for safety funding (*, HSIP) and support Vision Zero or Safe System initiatives.</li><li>Lead electrical design for traffic signals, roadway and intersection lighting, flashing beacons, pedestrian hybrid beacons, and ITS infrastructure, including load calculations, grounding, surge protection, and backup power.</li><li>Develop plans, specifications, and estimates (PS&amp;E) and approve electrical details for safety improvement projects.</li><li>Specify controller cabinets, detection, communications, and power equipment, and set standard details for the agency.</li><li>Review signal, lighting, and safety plans from consultants, developers, and contractors, providing technical sign-off.</li><li>Oversee construction support, field inspection, testing, and commissioning to confirm installations meet design intent and electrical code.</li><li>Investigate high-crash locations, signal outages, and electrical failures, directing corrective action.</li><li>Ensure compliance with the MUTCD, NEC, NEMA TS 2, AASHTO Highway Safety Manual, ADA/PROWAG, and local or state standards.</li><li>Manage project schedules, budgets, and consultant contracts, and coordinate with utilities and other agencies.</li><li>Present findings to leadership, elected officials, and the public, and respond to citizen safety concerns.</li><li>Mentor and review the work of engineers and technicians, and help develop design guidelines and training.</li></ul><h3>Required Qualifications</h3><ul><li>Bachelor’s degree in Electrical Engineering, Civil Engineering, Electronics Engineering, or a related field.</li><li>A minimum of 12 years of progressive experience in traffic safety, signal, and lighting.</li><li>Demonstrated ability to work in the field under varying weather conditions and near live traffic.</li><li>Proven experience in analyzing crash data and applying effective safety countermeasures.</li></ul><h3>Work Environment</h3><p>This role is based in Al Jubail, Eastern Province, and involves full-time work. The position may require field work, including exposure to varying weather conditions and proximity to live traffic.</p>

<h3>About the Opportunity</h3><p>TESCO Engineering is seeking a <strong>Saudi Graduate Engineer Trainee (GET)</strong> to join its engineering team in Al Jubail, Eastern Province. This full-time position is designed for recent engineering graduates with 0-1 years of experience who are looking to develop practical technical skills and gain hands-on experience in mechanical engineering, reverse engineering, manufacturing, and mechanical sealing technologies.</p><h3>Role Overview</h3><p>The Graduate Engineer Trainee will contribute to various engineering activities, focusing on practical application and skill development. This role provides exposure to industrial engineering and manufacturing operations, working alongside experienced professionals to gain comprehensive knowledge in the field.</p><h3>Key Responsibilities</h3><ul><li>Assist with dimensional inspection, measurement, and technical evaluation of mechanical components.</li><li>Support the preparation of 2D engineering drawings, 3D CAD models, and manufacturing documentation.</li><li>Participate in reverse engineering activities under the guidance of experienced engineers.</li><li>Assist in material identification, component verification, and engineering documentation.</li><li>Maintain technical drawings, specifications, and engineering records.</li><li>Support engineering design improvements, equipment reliability initiatives, and component standardization.</li><li>Participate in failure investigations and root cause analysis activities.</li><li>Gain practical exposure to research and development, mechanical seal technologies, and industrial manufacturing processes.</li></ul><h3>Qualifications and Experience</h3><ul><li>Fresh engineering graduate with 0-1 years of experience.</li><li>Motivated and enthusiastic to develop practical technical skills.</li><li>Eager to gain hands-on experience in mechanical engineering and related fields.</li></ul><h3>What We Offer</h3><ul><li>Practical exposure to industrial engineering and manufacturing operations.</li><li>Opportunities to learn from experienced engineering professionals.</li><li>Hands-on experience in mechanical component design, inspection, and reverse engineering.</li><li>A professional working environment focused on technical development and continuous improvement.</li></ul><h3>Application Process</h3><p>Interested candidates are encouraged to apply for this full-time position in Al Jubail. Salary details will be discussed during the interview process.</p>

<h3><strong>About the Role</strong></h3><p>alfanar is seeking a <strong>Civil Project Engineer</strong> to support the successful execution of civil work throughout the project lifecycle. This full-time role is based in <strong>Riyadh</strong> or <strong>Al Jubail</strong> and requires 3 -5 years of experience. The position is responsible for coordinating design, procurement, construction, and technical activities while ensuring compliance with project specifications, client requirements, quality standards, and project schedules.</p><h3><strong>Role Purpose</strong></h3><p>The Civil Project Engineer will combine strong civil engineering knowledge with project coordination expertise to deliver efficient, safe, and cost-effective solutions across industrial, power, substations, and infrastructure projects. This involves ensuring all civil work aligns with project specifications and client expectations.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Review project documents, specifications, and client requirements.</li><li>Coordinate civil activities with project schedules and workflow.</li><li>Coordinate site setup and mobilization requirements.</li><li>Coordinate site development activities including topographic surveys, grading, soil investigations, earthworks, and related civil works.</li><li>Coordinate with design consultants, precast engineering teams, construction teams, and subcontractors.</li><li>Review civil design deliverables and ensure compliance with client requirements.</li><li>Support and coordinate procurement activities, including technical evaluation of offers and coordination up to PO issuance.</li><li>Review and prepare material requirements for civil work.</li><li>Resolve technical issues and construction challenges.</li><li>Provide technical guidance to construction teams during project execution.</li><li>Coordinate civil shop drawings with IFC drawings and site requirements.</li><li>Identify cost optimization opportunities.</li><li>Participate in technical meetings with all stakeholders.</li><li>Maintain compliance with Alfanar Projects’ quality, health, safety, and environmental requirements.</li></ul><h3><strong>Experience and Qualifications</strong></h3><p>Candidates should possess 3-5 years of relevant experience in civil engineering project execution and coordination. A strong understanding of civil engineering principles and project management methodologies is essential for this role.</p><h3><strong>Work Environment and Benefits</strong></h3><p>alfanar supports a healthy work-life balance through flexible working hours, allowing employees some flexibility in their daily start and finish times, while maintaining a structured working schedule of up to 48 hours per week. The company offers a friendly and collaborative work environment, a competitive salary and benefits package, comprehensive medical coverage and wellness support, and opportunities for learning, growth, and new challenges. The team is diverse, welcoming good ideas and recognizing hard work.</p><h3><strong>Commitment to Teamwork</strong></h3><p>The company believes in the collective effort of every team member to achieve its goals. Employees are encouraged to approach their work with purpose and conclude their day with a sense of accomplishment.</p>

<h3>About the Role</h3><p>TRS Staffing Solutions is seeking a <strong>Senior Civil Engineer</strong> to join their team in Jubail, Eastern, Saudi Arabia. This full-time position focuses on projects within the Oil &amp; Gas, Petrochemical, and Chemicals plants sectors, requiring extensive experience in civil engineering design and project execution.</p><h3>Key Responsibilities</h3><ul><li>Apply international design codes and standards including AASHTO, ACI, API, ASTM, AWWA, NFPA, and PIP.</li><li>Perform earthwork design, covering rough grading and finish grading.</li><li>Execute roads and paving design, including geometric design for roads.</li><li>Design site development, fencing, and gates.</li><li>Adhere to local codes and regulations such as HCIS and RC standards.</li><li>Develop designs for storm water drainage, potentially contaminated drainage, sanitary sewers, and fire water drainage.</li><li>Conduct hydraulic design for evaporation ponds and first flush ponds.</li><li>Prepare scopes of work for geotechnical investigations, topographical surveys, and underground scanning surveys.</li><li>Utilize drainage software such as Civilstorm, SewerGem, or other industry-recognized tools.</li><li>Employ site grading software like Civil 3D, Open Roads, or other industry-recognized applications.</li><li>Prepare design calculation reports, Basis of Design documents, project specifications, and standards.</li><li>Engage in 3D-based project execution and be familiar with review software such as Navisworks and SPR.</li><li>Conduct squad checks and review vendor drawings.</li><li>Prepare Material Take-offs.</li></ul><h3>Qualifications and Experience</h3><ul><li>Bachelor’s degree in Civil Engineering is required.</li><li>A minimum of <strong>10 years of civil engineering experience</strong> is essential, specifically involving earthwork, site grading, roads, and various types of drainage design.</li><li>Experience must be within the petrochemical, fertilizer, refining, oil, or gas industries.</li><li>At least <strong>5-7 years of this experience</strong> should be with a recognized international FEED/EPC contractor.</li><li>Candidates must possess strong experience in both FEED and Detailed Design projects, encompassing greenfield and brownfield developments.</li><li>Site or construction experience will be considered an asset.</li></ul><h3>Location</h3><p>This position is based in Al Jubail, Saudi Arabia. Candidates currently residing in Saudi Arabia will be highly considered.</p>

<h3>نبذة عن الدور</h3><p>تبحث شركة سراكو عن <strong>مهندس تدفئة وتهوية وتكييف</strong> للانضمام إلى فريقها في المنطقة الشرقية، الجبيل. يركز هذا الدور بدوام كامل على دراسة وتصميم والإشراف على أنشطة الإنتاج والتركيب والصيانة لمعدات وأنظمة التدفئة والتهوية وتكييف الهواء. يتطلب الدور خبرة تتراوح بين سنتين وخمس سنوات في المجال.</p><h3>المهام والمسؤوليات الرئيسية</h3><ul><li>تصميم المعدات والنظم، وتحديد معايير الأداء والجودة المطلوبة.</li><li>إدارة عمليات تركيب المعدات والنظم، بما في ذلك إعداد الجداول الزمنية وتقديرات التكلفة.</li><li>تنفيذ برامج تشغيل المعدات وبرامج الصيانة الوقائية وفقاً لتعليمات الشركات المصنعة، ومتابعة إجراءات تنفيذها.</li><li>تطوير أساليب وإجراءات العمل ومواكبة التطورات التقنية في مجال التدفئة والتهوية وتكييف الهواء.</li><li>إعداد الوثائق والتقارير المتخصصة المتعلقة بالأعمال والمشاريع الهندسية، وتوضيح نسب تقدمها، وعرضها، وحفظها في قاعدة البيانات الخاصة بها بما يتوافق مع السياسات والإجراءات المعتمدة.</li></ul><h3>المؤهلات والخبرات</h3><ul><li>خبرة عملية تتراوح بين <strong>سنتين وخمس سنوات</strong> في مجال هندسة التدفئة والتهوية وتكييف الهواء (HVAC).</li><li>فهم عميق لمعدات وأنظمة التدفئة والتهوية وتكييف الهواء.</li><li>القدرة على تصميم الأنظمة وتحديد معايير الأداء.</li></ul><h3>المهارات المطلوبة</h3><ul><li>مهارات قوية في التصميم الهندسي والإشراف على المشاريع.</li><li>القدرة على إدارة الجداول الزمنية وتقدير التكاليف.</li><li>مهارات ممتازة في إعداد التقارير والوثائق الفنية.</li><li>القدرة على متابعة التطورات التقنية وتطبيقها.</li></ul><h3>بيئة العمل</h3><p>هذا الدور بدوام كامل ويقع في الجبيل، المنطقة الشرقية. سيعمل المهندس ضمن فريق متخصص في شركة سراكو، حيث تتاح الفرصة للمساهمة في مشاريع هندسية مهمة.</p><h3>معلومات إضافية</h3><p>الراتب لهذا المنصب سيتم تحديده بناءً على الخبرة والمؤهلات، ولن يتم الكشف عنه مسبقاً. نشجع المهندسين المؤهلين الذين يمتلكون الخبرة المطلوبة على التقديم لهذا الدور.</p>

نبحث عن مهندس يجمع بين الكفاءة الإنشائية والحس الإبداعي في التصميم الداخلي وإعداد الرسومات الهندسية، ليتولى دراسة المواقع الإنشائية من النواحي الطبوغرافية واختبارات فحص التربة، وإعداد وتدقيق المخططات الإنشائية والمعمارية التفصيلية. سيكون مسؤولاً عن ترجمة متطلبات المشاريع إلى تصاميم ورسومات ثلاثية الأبعاد (3D) ومخططات تنفيذية قابلة للتطبيق، مع متابعة إعداد جداول الكميات والمواصفات الفنية للمواد واختيار خامات التشطيب. كما يتولى الإشراف الميداني على تنفيذ الأعمال الإنشائية والداخلية ومطابقتها للمواصفات وكود البناء المعتمد، والتنسيق مع فرق العمل والمقاولين وإعداد التقارير والوثائق الدورية لنتائج الإنجاز بما يضمن تسليم المشاريع بأعلى معايير الجودة والسلامة

<h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">About the Advanced Process Control Engineer Role</h3> <p style="margin:0 0 12px; ************;">ANDRITZ is seeking a skilled <strong style="font-weight:700;">Advanced Process Control (APC) Engineer</strong> to join its team in Jubail, Eastern, Saudi Arabia. This full-time position focuses on supporting the delivery of advanced automation and digitalization solutions across complex industrial environments. The role involves optimizing customer operations through the design and application of advanced process control technologies, including model predictive control, real-time optimization (RTO), data analytics, and digital twins.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Key Responsibilities</h3> <p style="margin:0 0 12px; ************;">The Advanced Process Control Engineer will play a key role in evaluating process performance, developing and implementing control strategies, and supporting commissioning and continuous improvement initiatives. Responsibilities include ensuring alignment with technical standards, safety requirements, and customer expectations. Specific duties involve:</p> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Evaluating operating processes to identify opportunities for optimization, efficiency gains, and variability reduction.</li> <li style="margin:0 0 6px;">Designing and implementing advanced process control (APC) solutions, including control strategies and optimization applications.</li> <li style="margin:0 0 6px;">Developing and validating dynamic process models using plant data and first-principles simulation techniques.</li> <li style="margin:0 0 6px;">Configuring and tuning multivariable predictive controllers and associated control parameters.</li> <li style="margin:0 0 6px;">Collecting, analyzing, and interpreting engineering and operational data to support model development and optimization strategies.</li> <li style="margin:0 0 6px;">Collaborating with control room operators, process engineers, and instrumentation teams to complete commissioning and control response testing.</li> <li style="margin:0 0 6px;">Providing commissioning, start-up, and troubleshooting support for deployed APC applications.</li> <li style="margin:0 0 6px;">Executing simulation and acceptance testing for large-scale optimization projects to ensure system performance and reliability.</li> <li style="margin:0 0 6px;">Monitoring application performance and recommending continuous improvements to sustain optimization benefits over time.</li> <li style="margin:0 0 6px;">Preparing and maintaining technical documentation, including control strategies, test plans, and commissioning reports.</li> <li style="margin:0 0 6px;">Supporting proposal development and identifying opportunities for expanded automation and digitalization solutions.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Candidate Profile and Experience</h3> <p style="margin:0 0 12px; ************;">This position is suitable for a technically strong engineer with <strong style="font-weight:700;">5-10 years of experience</strong> in a relevant field. The ideal candidate thrives in dynamic project environments and is focused on driving measurable performance improvements. Strong problem-solving skills are essential, along with the ability to work independently while contributing effectively to team objectives.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Required Skills and Attributes</h3> <ul style="margin:0 0 12px; padding-inline-start:24px; list-style-type:disc; list-style-position:outside;"> <li style="margin:0 0 6px;">Excellent interpersonal, verbal, and written communication skills.</li> <li style="margin:0 0 6px;">Ability and willingness to travel domestically and internationally to support commissioning and site activities.</li> </ul> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Commitment to Safety and Values</h3> <p style="margin:0 0 12px; ************;">The successful candidate will adhere to company safety standards, including the ANDRITZ Life-Saving Rules, and actively promote a strong safety culture. This role also requires demonstrating and reinforcing #1ANDRITZway core values and behaviors in all aspects of work.</p> <h3 style="font-size:18px; font-weight:700; margin:16px 0 8px;">Application Details</h3> <p style="margin:0 0 12px; ************;">This full-time opportunity is based in Al Jubail. Salary for this position will be discussed during the interview process.</p>

<h3>About the Role</h3><p>Alfalak Electronic Equipment &amp; Supplies Co. is seeking a <strong>Construction Representative</strong> to join their team in Jubail, Eastern, Saudi Arabia. This full-time role is crucial for ensuring that construction projects align with established objectives for safety, quality, schedule, productivity, and cost. The position requires a professional with 5-10 years of experience in construction oversight.</p><h3>Key Responsibilities</h3><ul><li>Ensure construction phases meet EHS, quality, schedule, productivity, and cost objectives.</li><li>Support the planning, execution, supervision, handover, and completion of construction activities according to contracts, specifications, and standards.</li><li>Coordinate with project, operations, and maintenance functions to achieve project goals.</li><li>Implement construction safety plans, specifications, procedures, regulatory requirements, and permits in line with Sadara EHS requirements and work processes.</li><li>Promote a zero-incident culture through safety campaigns, site walks, stand-downs, and related activities.</li><li>Participate in constructability studies, 3D model reviews, risk reviews, internal progress meetings, root-cause investigations, schedule reviews, audits, and lessons-learned meetings.</li><li>Support the initiation of contractor claims and change-order requests via the Project Lead Engineer when defects, contractual inconsistencies, or scope changes are identified.</li><li>Ensure the implementation of quality control plans and involve Asset Integrity experts as required.</li><li>Monitor and control construction activities, including changes, additions, work acceptance, and invoice release.</li><li>Review job specifications to determine suitable construction methods.</li><li>Ensure red-lined technical documents are available and accurately reflect the current as-built site condition.</li><li>Participate in project closeout and provide feedback to design teams and contractors.</li><li>Participate in contractor qualification and selection, construction strategy development, and handover to commissioning.</li><li>Perform other job-related activities as requested by the immediate supervisor or manager.</li></ul><h3>Work Schedule</h3><p>The role requires matching the construction contractor's working hours, which will likely involve a <strong>6-day working week</strong>, potential overtime, and night shift activities.</p><h3>Experience Required</h3><ul><li>Candidates should possess <strong>5-10 years of relevant experience</strong> in construction management or oversight roles.</li></ul>

<h3>About KBR Saudi Arabia</h3><p>KBR Sustainable Technology Solutions (STS) delivers comprehensive solutions across the entire asset lifecycle. This includes licensed process technologies, advisory services, technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions for optimizing planned and operating assets.</p><h3>The Role: QA/QC Electrical Engineer</h3><p>KBR Saudi Arabia is seeking a <strong>QA/QC Electrical Engineer</strong> to join its team in Al Jubail. This full-time position involves technical and supervisory responsibilities focused on electrical works, ensuring compliance with international standards and codes.</p><h3>Key Responsibilities</h3><ul><li>Supervise and monitor the progress of electrical works, installation, and commissioning across various units.</li><li>Plan and manage the inspection of all electrical works and related activities.</li><li>Oversee testing and commissioning procedures for electrical works.</li><li>Conduct final inspections of completed electrical works prior to client handover.</li><li>Review electrical shop drawings and vendor drawings to ensure compliance with contract documents.</li><li>Assess electrical material submittals for adherence to contract documents.</li><li>Verify electrical specifications and calculations for conformance with contract documents.</li><li>Implement the Electrical Quality Assurance Plan.</li><li>Review as-built drawings for mechanical works, operation and maintenance manuals, and warranties.</li><li>Ensure strict compliance with all safety procedures.</li><li>Promote the reporting of unsafe acts and conditions.</li><li>Adhere to all Safety, Health, and Environment (SHE) procedures before and during work activities.</li></ul><h3>Qualifications and Experience</h3><ul><li>Demonstrated experience in testing and commissioning of electrical works.</li><li>Knowledge of international standards and codes relevant to electrical works.</li><li>A minimum of <strong>5 to 10 years</strong> of relevant experience is required for this role.</li></ul><h3>Work Location</h3><p>This full-time position is based in <strong>Al Jubail, Saudi Arabia</strong>.</p>

<h3>About KBR Saudi Arabia</h3><p>KBR Sustainable Technology Solutions (STS) delivers comprehensive solutions across the entire asset lifecycle, including licensed process technologies, advisory services, technical expertise, energy transition solutions, high-end design capabilities, and smart solutions for optimizing planned and operating assets.</p><h3>The Role of QA/QC Instrument Engineer</h3><p>KBR Saudi Arabia is seeking a QA/QC Instrument Engineer for a full-time position in Al Jubail. This role involves technical and supervisory responsibilities, ensuring adherence to international standards and codes related to mechanical works, in line with organizational standards. The position requires 5-10 years of experience.</p><h3>Key Responsibilities</h3><ul><li>Supervise and monitor the progress of instrumentation works, installation, and commissioning across various units.</li><li>Plan and control the inspection activities for all instrumentation works and related tasks.</li><li>Oversee the testing and commissioning phases of instrumentation works.</li><li>Monitor the final inspection of completed instrumentation works prior to client handover.</li><li>Review instrumentation shop drawings and vendor drawings to ensure compliance with contract documents.</li><li>Evaluate instrumentation material submittals for adherence to contract documents.</li><li>Assess instrumentation specifications and calculations for conformance with contract documents.</li><li>Implement the Instrumentation Quality Assurance Plan.</li><li>Review as-built drawings of instrumentation works, operation and maintenance manuals, and warranties.</li><li>Ensure compliance with all safety procedures.</li><li>Encourage the reporting of unsafe acts and conditions.</li><li>Comply with all Safety, Health, and Environment (SHE) procedures before and during work.</li></ul><h3>Required Qualifications and Experience</h3><ul><li>5-10 years of experience in a relevant field.</li><li>Demonstrated experience in testing and commissioning of instrumentation works.</li></ul><h3>Skills and Attributes</h3><ul><li>Well-organized and proactive approach.</li><li>Excellent communication skills.</li><li>Proven leadership capabilities within large organizations.</li><li>Maturity of judgment under pressure and ability to resolve problems effectively.</li><li>Strategic management skills.</li></ul>

<p>Eram Talent is hiring on behalf of its leading Petrochemical client for a <strong>Construction Representative</strong> to support major petrochemical projects and construction activities.</p><p>The client is seeking an experienced construction professional with a strong background in petrochemical project execution, construction supervision, quality assurance, and field activities. The successful candidate will be responsible for supporting the planning, execution, monitoring, and completion of construction activities while ensuring compliance with EHS requirements, quality standards, project specifications, schedules, and cost objectives.<br></p><strong>Key Responsibilities<br><br></strong><ul><li>Ensure the construction phase meets EHS, quality, schedule, productivity, and cost objectives.</li><li>Support the successful planning, execution, supervision, handover, and completion of construction activities in accordance with contracts, specifications, and standards.</li><li>Coordinate with project, operations &amp; maintenance functions to achieve project goals.</li><li>Ensure construction safety plans, specifications, procedures, regulatory requirements, and permits are implemented in accordance with Sadara EHS requirements and work processes.</li><li>Promote a zero-incident culture through safety campaigns, site walks, stand-downs, and related activities.</li><li>Participate in constructability studies, 3D model reviews, risk reviews, internal progress meetings, root-cause investigations, schedule reviews, audits, and lessons-learned meetings.</li><li>Support initiation of contractor claims and change-order requests through the Project Lead Engineer when defects, contractual inconsistencies, or scope changes are identified.</li><li>Ensure implementation of quality control plans and involvement of Asset Integrity experts, where required.</li><li>Monitor and control construction, including changes, additions, work acceptance, and invoice release.</li><li>Review job specifications to determine suitable construction methods.</li><li>Ensure red-lined technical documents are available and reflect the current as-built site condition.</li><li>Participate in project closeout and provide feedback to design teams and contractors.</li><li>Participate in contractor qualification and selection, construction strategy development, and handover to commissioning.</li><li>Matching Construction contractor hours of working will be required, likely needing 6 days working week, overtime &amp; potential night shift activities. </li><li>Perform other job-related activities requested by the immediate supervisor or manager.<br><br></li></ul><strong>Requirements<br><br></strong><ul><li>Two-year associate degree in a relevant field.</li><li>Minimum 7 years of experience across phases of chemical or petrochemical projects.</li><li>5 years experience of quality checks and field quality assurance activities during construction.</li><li>Relevant experience in project construction within the petroleum or petrochemical industry.</li><li>Working knowledge of Microsoft Office applications and SAP.</li></ul>

<h3>About the Role</h3><p>Kent is seeking a <strong>Senior Site/Construction Piping Engineer</strong> to join their team in the Eastern Province of Saudi Arabia. This is a full-time position, requiring 48 hours per week, focused on the end-to-end execution of piping and structural construction scope at various sites within Dammam, Al Khobar, Dhahran, Al Jubail, Al-Ahsa, Ras Tannurah, Al Khafji, and Buqayq. The role involves overseeing all aspects from engineering drawing review to the physical fabrication, erection, and tie-in of piping systems, ensuring compliance with project standards and safety regulations.</p><h3>Key Responsibilities</h3><ul><li>Provide technical oversight for piping/structural work areas and supervise the preparation of Construction/Installation Work Packages (CWPs/IWPs) and site deliverables.</li><li>Review IFC drawings, P&amp;IDs, isometrics, piping GA drawings, pipe support drawings, and structural drawings.</li><li>Mark up redline drawings based on actual field conditions, approved field changes, and site deviations, and coordinate their formal incorporation into as-built documentation.</li><li>Supervise piping spool fabrication, erection, shop/field welding, and flanged/welded tie-ins according to approved specifications.</li><li>Oversee the installation of pipe supports, pipe racks, and associated structural steel (platforms, handrails, gratings, ladders) that support the piping scope.</li><li>Coordinate pipe routing and support locations with structural design and existing infrastructure to resolve potential issues before fabrication/erection.</li><li>Follow up on hydro testing and reinstatement packages for piping systems.</li><li>Identify and resolve discrepancies from approved designs, raising Technical Queries (TQs) as needed.</li><li>Ensure compliance with applicable project Piping Design Procedures, Saudi Aramco Engineering Standards (SAES/SAEP), and international standards such as ASME, API, and AISC.</li><li>Coordinate with QA/QC for inspection requests, hold points, and non-conformance report (NCR) close-outs.</li><li>Support Mechanical Completion and pre-commissioning handover activities.</li></ul><h3>Qualifications and Experience</h3><ul><li>A minimum of <strong>5 to 10 years of experience</strong> in site or construction piping engineering.</li><li>Demonstrated experience in reviewing engineering drawings and preparing construction work packages.</li><li>Proficiency in supervising fabrication, erection, and tie-in of piping systems.</li><li>Familiarity with Saudi Aramco Engineering Standards and Procedures (SAES/SAEP) and international standards like ASME, API, and AISC.</li></ul><h3>Quality and Safety Compliance</h3><p>The successful candidate will be responsible for ensuring that all piping and structural activities are executed safely, to the required quality, and in line with the project schedule, approved drawings, and specifications. This includes strict adherence to Kent’s ISO accredited QMS and project-specific procedures. The employee shall observe all Health, Safety, Sustainability, Environment, and Quality rules of Kent, its clients, and the governing authorities of Saudi Arabia.</p><h3>Professional Development</h3><p>In consultation with the Construction Manager, the engineer will take responsibility for identifying personal development needs and ensuring agreed development goals are met. The role also involves performing related duties as instructed.</p><h3>Work Location</h3><p>This full-time position is based in the Eastern Province of Saudi Arabia, with potential assignments across Dammam, Al Khobar, Dhahran, Al Jubail, Al-Ahsa, Ras Tannurah, Al Khafji, and Buqayq.</p>

<h3>About KBR and the Role</h3><p>KBR Sustainable Technology Solutions (STS) delivers comprehensive solutions across the entire asset lifecycle, encompassing licensed process technologies, advisory services, technical expertise, energy transition solutions, high-end design capabilities, and smart solutions for optimizing assets. KBR is seeking a <strong>Reliability Engineer</strong> to join their team in Al Jubail, Eastern region. This is a full-time position focused on coordinating and executing responsibilities related to establishing and governing the Total Reliability Program Framework within a refinery setting.</p><h3>Key Responsibilities</h3><ul><li>Develop the framework and methodology for criticality assessment and reliability improvement programs for refinery assets.</li><li>Lead and conduct Asset Criticality Analysis for all refinery assets, including data collection, workshop facilitation, report compilation, and SAP data population.</li><li>Champion the implementation of various reliability methodologies across all asset types by establishing programs to sustain operational excellence.</li><li>Serve as the primary contact for reliability culture development in projects and operating facilities, providing technical guidance to safeguard asset reliability throughout its lifecycle.</li><li>Administer and execute Asset Lifecycle management procedures, including Asset criticality ranking, SAP Taxonomy, Asset Operating Limits (IOW), maintenance development, Master data developments in SAP, Bill of Materials (BOM) in SAP, and active SAP-PMs implementation and effectiveness.</li><li>Initiate and conduct studies for facility and operational asset improvements, offering specialized technical service and acting as a consultant on complex engineering problems.</li><li>Integrate lessons learned from benchmarks and safety cases, providing recommendations to ensure continuous assurance for Safety-Critical Equipment within the Total Reliability program.</li><li>Collaborate with multidisciplinary teams to analyze integrity and performance, suggesting methods for preventing chronic failures, and supporting the review of Total Reliability program KPIs.</li><li>Report to the Project Manager, leading the Reliability section to deliver periodic outcomes and progress reports.</li><li>Work closely with the project execution team to ensure commitment to the Reliability Transformation Program.</li></ul><h3>Required Qualifications and Experience</h3><ul><li>A minimum of <strong>10 years of experience</strong> in a relevant field.</li><li>Demonstrated expertise in reliability engineering principles and methodologies.</li><li>Proficiency in SAP modules related to asset management and maintenance (*, SAP-PM).</li></ul><h3>Work Environment</h3><p>This role is based in <strong>Al Jubail, Eastern</strong>, and operates on a <strong>full-time</strong> basis. The Reliability Engineer will work within a refinery environment, collaborating with various plant-wide and multidisciplinary teams to achieve reliability objectives.</p><h3>Reporting Structure</h3><p>The Reliability Engineer will report directly to the Project Manager and will lead the Reliability section, ensuring timely delivery of project outcomes and progress reports.</p><h3>About KBR Sustainable Technology Solutions (STS)</h3><p>KBR STS is committed to providing holistic and value-added solutions across the entire asset life cycle, leveraging world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, and energy transition solutions.</p>

<h3><strong>About alfanar Electric</strong></h3><p>alfanar, headquartered in Riyadh, Saudi Arabia, is a diversified company with operations in construction, manufacturing, design, and development across the Middle East and other countries. The company is active in Electrical, Electromechanical, and Civil Engineering Construction, manufacturing and marketing electrical construction products, and providing allied engineering services.</p><p>alfanar Electric serves as the industrial arm of alfanar, specializing in the manufacturing of low, medium, and high voltage electrical construction products. Its industrial facilities are located in Riyadh and Al Jubail, Saudi Arabia; Dubai, UAE; and London, UK. alfanar also maintains a development and engineering center in Chennai, India. The primary hub for alfanar’s industrial activities is the alfanar Industrial Complex in Riyadh, spanning 700,000 square meters and housing comprehensive infrastructure.</p><h3><strong>Role Overview</strong></h3><p>alfanar Electric is seeking a <strong>Sr. HSE Engineer</strong> to provide advanced technical support for Health, Safety, and Environment (HSE) across assigned areas. This full-time role involves conducting risk assessments, performing inspections, investigating incidents, and verifying operational controls during day or night shifts. The Sr. HSE Engineer will contribute to strengthening compliance, emergency readiness, and technical competency through guidance, analysis, and effective shift handover processes in Riyadh and Al Jubail, Saudi Arabia. The position requires 6-10 years of relevant experience.</p><h3><strong>Key Responsibilities</strong></h3><ul><li>Conduct complex risk assessments, including ATEX/hazardous-area classification, machinery safety, chemical exposure, and fire risks, and develop appropriate assessment methodologies.</li><li>Review assessments prepared by engineers and inspectors, verifying the adequacy of proposed mitigation measures.</li><li>Assess HSE controls for contractor activities, maintenance, shutdowns, projects, and production line modifications.</li><li>Support occupational exposure assessments and verify environmental controls for chemicals, waste, and spill prevention.</li><li>Develop inspection schedules and conduct planned patrols of high-risk areas during assigned shifts, providing technical guidance on inspection priorities.</li><li>Participate in cross-factory audits and conduct ISO 45001/14001 internal audits as assigned.</li><li>Verify permit-to-work, hot work, and lockout/tagout compliance for operational, maintenance, and contractor activities, identifying deviations from approved procedures.</li><li>Verify valid third-party certification of regulated equipment and required operator licenses, exercising stop-work authority when unsafe conditions present unacceptable risk.</li><li>Investigate serious and high-potential incidents using advanced root cause analysis methods and recommend actions to address underlying causes.</li><li>Provide immediate incident response, coordinate with emergency teams, secure the scene for investigation, and escalate serious incidents to the HSE Manager without delay.</li><li>Maintain area emergency response arrangements and participate in drills aligned with Civil Defense requirements.</li><li>Coach engineers and inspectors, contribute to competency assessments, and develop structured technical development plans.</li><li>Develop training materials and deliver awareness campaigns, toolbox talks, and technical training, including for permit issuers and receivers.</li><li>Develop improvements to inspection methods, digital reporting, and operational controls, benchmarking good practices and measuring their impact.</li><li>Analyze HSE findings, incident trends, and KPIs, presenting findings and technical recommendations to stakeholders.</li><li>Track corrective actions through closure and verify their effectiveness.</li><li>Prepare shift HSE reports and manage handover of incidents, significant risks, and outstanding actions between day and night teams to ensure continuity of HSE coverage.</li></ul><h3><strong>Accountabilities and Compliance</strong></h3><ul><li>Maintain updated soft and technical skills relevant to the job.</li><li>Perform planned activities to meet operational and development targets as per delivery schedules, utilizing resources effectively within cost and time constraints.</li><li>Provide periodic reports detailing deviations and execution of planned tasks.</li><li>Solve related problems and escalate complex operational issues.</li><li>Ensure quality requirements are met to develop effective quality control and processes, including specifications for products, processes, or related activities.</li><li>Coordinate well-defined written systems, policies, procedures, and seek automation opportunities.</li><li>Comply with relevant policies, procedures, and work instructions.</li><li>Ensure compliance with relevant safety, quality, and environmental management procedures and controls within the defined area of work activity.</li></ul><h3><strong>Experience and Work Type</strong></h3><p>This is a full-time position requiring 6-10 years of experience in a relevant HSE role. The successful candidate will be based in either Riyadh or Al Jubail, Saudi Arabia, and will be expected to work day or night shifts as assigned to ensure continuous HSE coverage.</p>

<h3>About the Role</h3><p>JAL International Co. Ltd. is seeking a <strong>Building Inspection Engineer</strong> with expertise in Mechanical, Electrical, Civil, Architectural, Piping/Plumbing, or Instrumentation disciplines. This contract position is based in Al Jubail, Eastern region, and requires a professional with 5-10 years of experience in building inspection and compliance.</p><h3>Role Objective</h3><p>The primary objective of this role is to ensure a structured, timely, and high-quality handover of buildings from the Project Management Team (PMT) to Facility Management (FMD). This involves verifying compliance with design specifications, monitoring commissioning activities, and addressing any identified gaps prior to acceptance.</p><h3>Key Responsibilities</h3><ul><li>Ensure buildings are ready for handover.</li><li>Verify compliance with design specifications and relevant standards.</li><li>Monitor testing and commissioning activities for various building systems.</li><li>Identify and facilitate the closure of any deficiencies or gaps before building acceptance.</li><li>Support Facility Management (FMD) in technical evaluation and decision-making processes.</li><li>Inspect new and existing buildings to ensure adherence to building codes and other regulations.</li><li>Inspect building sites to confirm compliance with safety and zoning requirements.</li><li>Provide recommendations for improvements in safety, accessibility, and energy efficiency.</li><li>Test electrical wiring, HVAC systems, plumbing, and other building systems to ensure code compliance.</li><li>Identify and document code violations, offering guidance or recommendations for corrective actions.</li><li>Prepare detailed reports documenting inspections and identified violations.</li><li>Issue notices and citations for violations as required.</li><li>Conduct follow-up inspections to verify that code violations have been corrected.</li><li>Provide guidance to contractors and property owners regarding code requirements.</li></ul><h3>Qualifications and Experience</h3><ul><li>A minimum of 5 to 10 years of experience in building inspection or a related field.</li><li>Expertise in one or more of the following disciplines: Mechanical, Electrical, Civil, Architectural, Piping/Plumbing, or Instrumentation.</li><li>Demonstrated understanding of building codes, regulations, and safety standards.</li></ul><h3>Work Type and Location</h3><p>This is a <strong>contract position</strong> located in <strong>Al Jubail, Eastern region</strong>. The role involves working within a structured environment focused on ensuring compliance and quality in building handovers.</p><h3>Application Process</h3><p>Interested candidates who meet the specified requirements are encouraged to apply. Salary details will be discussed during the interview process.</p>

<h3>About the Role</h3><p>Datamatics Technologies is seeking a <strong>Data Engineer</strong> to join their team in Al Jubail, Eastern region. This full-time role focuses on building, configuring, and optimizing data ingestion, transformation, and consumption workloads within a modern on-premises lakehouse platform. The ideal candidate will possess strong hands-on experience with Spark-based development and enterprise data lake/lakehouse implementations.</p><h3>Key Responsibilities</h3><ul><li>Design and develop scalable data ingestion and transformation pipelines.</li><li>Build, optimize, and maintain Spark-based ETL/ELT workloads.</li><li>Develop and manage data models and datasets using Apache Iceberg tables.</li><li>Implement and support data integration workflows using Informatica.</li><li>Enable analytics and data consumption through Denodo, Starburst, and/or Dremio.</li><li>Develop secure, governed, and scalable data pipelines aligned with enterprise standards.</li><li>Support batch and near real-time data processing requirements.</li><li>Implement data quality, metadata management, and validation controls.</li><li>Collaborate with Platform Engineers on deployment, integration, and operationalization activities.</li><li>Support migration, testing, and production rollout initiatives.</li><li>Troubleshoot and optimize data pipeline performance, reliability, and scalability.</li></ul><h3>Required Experience and Skills</h3><p>Candidates should demonstrate strong hands-on experience with Spark-based development, enterprise data lake/lakehouse implementations, and Informatica-based integration solutions.</p><h3>Qualifications</h3><ul><li>5-10 years of experience in a relevant data engineering role.</li><li>Proficiency in Spark-based development.</li><li>Experience with enterprise data lake/lakehouse implementations.</li><li>Familiarity with Informatica-based integration solutions.</li></ul><h3>Work Environment</h3><p>This is a full-time position based in Al Jubail, Eastern region. The role involves working within a team focused on modern data platform solutions.</p>

<h3>About the Role of Mechanical Engineer</h3><p>Koch Engineered Solutions is seeking a <strong>Mechanical Engineer</strong> to join its team in Al Jubail. This full-time role requires a project-focused mindset and involves maintaining safe, reliable operations while contributing to plant transformation through automation, facility upgrades, and process and safety improvements.</p><h3>Key Responsibilities</h3><ul><li>Provide on-the-floor engineering support to operations and maintenance to assess equipment performance, troubleshoot issues, and evaluate system capabilities.</li><li>Actively participate in fostering a safety culture by addressing unsafe conditions and behaviors, and contributing suggestions for improvements.</li><li>Execute capital projects, including upgrades to plant systems, process equipment, and scalable transformation priorities.</li><li>Generate mechanical requirements and estimates for projects and equipment upgrades.</li><li>Collaborate with cross-functional teams to ensure project success.</li><li>Oversee the installation, operation, maintenance, and repair of manufacturing equipment such as conveying systems, automated stacking equipment, batching operations, and combustion furnace operations.</li><li>Read, modify, and create technical drawings, schematics, and computer-generated models.</li><li>Provide training and technical support to Maintenance and Production Departments.</li><li>Investigate equipment failures and recommend solutions for manufacturing processes.</li></ul><h3>Our Team and Work Environment</h3><p>Koch Engineered Solutions operates as a principled-based company that emphasizes teamwork and ingenuity. The company aims to be a partner of choice for both internal and external customers. The Al Jubail site employs over 250 individuals and specializes in the production of Float Glass, Vacuum Coating Glass, and Wet Coating Glass.</p><h3>Application Process</h3><p>Candidates interested in this Mechanical Engineer position are encouraged to apply.</p>

<strong>Position Specification <br><br></strong><strong> Division: </strong> <strong> Maintenance </strong> <strong> Section: </strong> <strong> Mechanical <br><br></strong><strong> Title: </strong> <strong> Mechanical Engineer </strong> <strong> Grade: <br><br></strong><strong> Reporting To: </strong> <strong> Lead Mechanical Engineer </strong> <strong> Reported By: </strong> <strong> Foreman <br><br></strong><strong> Qualification: </strong> <strong> B.E or above </strong> <strong> Experience/Age </strong> <strong> 2-3years/25-35years <br><br></strong><strong> External Hiring Criteria </strong> <strong> B.E or above. 3-5 years of experience at same position in similar technology power plant. </strong> <strong> Internal Promotion Criteria <br><br></strong>Position Summary:<br><br>The Mechanical Engineer will be accountable to supervise a team of maintenance technicians and support staff to fulfill the day to day mechanical maintenance activities at the power and desalination plant. In addition to supporting the management of the major outages of the plant through the provision of a gas turbine long-term service agreement, ensuring that the plant meets Safety, Environmental, availability, reliability, efficiency, and budgetary targets.<br><br>Functions/ Task:<br><br><strong> Safety at Work <br><br></strong><ul><li> Ensures the compliance of IMS. Ensure a safe working environment for himself, his colleagues and contractors while working on any equipment </li><li> Obtains a Permit to Work for each job as necessitated by the safety and associated Procedures </li><li> Ensures all Method Statements Work Instruction and Procedures are followed by himself and Contractors while undertaking any work </li><li> Ensures that all appropriate tools are available to ensure work can be carried out safely on equipment </li><li> Supervises Mechanical Technicians and Contractors to ensure Safety Rules and HSE procedures are followed </li><li> Reports any unsafe conditions in accordance with procedure <br><br></li></ul><strong> Maintenance Task Planning and Execution <br><br></strong><ul><li> Ensures maintenance tasks are completed by the Technicians as per Work Orders generated in CMMS </li><li> Ensures work done notes on maintenance carried out is documented in CMMS </li><li> Produce reports as necessary on any maintenance activity </li><li> Plans for and ensures that maintenance of all mechanical equipment is in accordance with OEM manuals and best practices for the equipment </li><li> Along with the Lead Engineer, ensures mechanical maintenance planning is correctly scheduled so that all equipment is maintained as per recommended intervals </li><li> Reviews Mechanical Maintenance Procedures and suggests where they can be improved <br><br></li></ul><strong> Equipment Failure Trouble Shooting and Repair <br><br></strong><ul><li> Supports the 24-hour operation by being regularly available for call-out at short notice </li><li> Attempts all possible means of reducing equipment downtime and ensuring high plant availability </li><li> Performs trouble shooting activities as necessary to determine failure conditions and rectifies defects found; </li><li> Records and reports to the Lead Engineer all rectification jobs undertaken </li><li> Generates reports of equipment failures </li><li> Performs Root Cause Analysis of Failures </li><li> Works with Plant Operations Personnel for resolving problems encountered with mechanical equipment. <br><br></li></ul><strong> Reporting and Planning and Budgeting <br><br></strong><ul><li> Discusses planned and unplanned jobs undertaken with the Lead Engineer </li><li> Works with the Lead Engineer for outage planning and execution </li><li> Assists the Lead Engineer in planning and budget preparation processes. <br><br></li></ul><strong> Spares, Consumables and Use of Tools and Equipment <br><br></strong><ul><li> Ensures adequate inventories of spares and consumables are maintained </li><li> Places requisitions for purchase of required spares and consumables </li><li> Ensures necessary tools and equipment is available to all Technicians </li><li> Ensures appropriate certification of all tools is done on a routine basis </li><li> Ensures all tools and equipment are appropriately maintained and are in good working condition <br><br></li></ul><strong> Provision of technical advice: <br><br></strong><ul><li> Delivers technical advice to colleagues and Contractors to ensure safety and the proper execution of Plant Maintenance Practices </li><li> Applies engineering knowledge and skills to review and update task lists for equipment. </li><li> Implements initiatives to address inconsistencies in CMMS scheduling, practices and documentation. <br><br></li></ul><strong> Staff Development: <br><br></strong><ul><li> Coaches Mechanical Technicians on a range of mechanical equipment, Safe Work Procedures and Operational Techniques to ensure proper execution of Plant Routines </li><li> Prepares and delivers Technical Training, including modules on GT &amp; ST, alignment techniques, valves, pump repairs, compressors, dryers, HRSG component inspections and BOP plant equipment. <br><br></li></ul><strong> Frame works, Boundaries, &amp; Decision Making Authority: <br><br></strong><ul><li> The jobholder operates under the general guidance of the Lead Engineer on all routine issues related to plant operations and team management </li><li> The jobholder is free to plan and manage own areas of activity within policy/procedural boundary limits Any extraordinary issues arising outside of set policies and procedures are referred to the Engineering Manager/Lead Engineer for discussion and approval of recommended actions <br><br></li></ul>Accountable for Outcomes:<br><br>Continuous on-the-job application of safety rules and HSE procedure<br><br>Frequency of Safety Incidents and near misses.<br><br>Lost Time Injury Frequency Rate (LTIFR)<br><br>No HSE compliance breaches.<br><br>Closed out Work Orders<br><br>Efficiency at work<br><br>Quality of Work<br><br>Quality of reports<br><br>Efficiency troubleshooting<br><br>RCA and follow-up action<br><br>Accuracy of outage planning<br><br>Accuracy of forecast budget<br><br>Downtime due to unavailability of necessary spares and consumables<br><br>Condition and quantity of available tool and equipment<br><br>Quality and accuracy of documentation<br><br>Skill of Technicians and quality of work<br><br>Staff feedback<br><br>Company Name: ENGIE Saudi Arabia<br><br>Minimum Base Salary:<br><br>Maximum Base Salary:<br><br>Pay Basis:

<strong>Position Specification <br><br></strong><strong> Division: </strong> <strong> Maintenance </strong> <strong> Section: </strong> <strong> Mechanical <br><br></strong><strong> Title: </strong> <strong> Mechanical Engineer </strong> <strong> Grade: <br><br></strong><strong> Reporting To: </strong> <strong> Lead Mechanical Engineer </strong> <strong> Reported By: </strong> <strong> Foreman <br><br></strong><strong> Qualification: </strong> <strong> B.E or above </strong> <strong> Experience/Age </strong> <strong> 2-3years/25-35years <br><br></strong><strong> External Hiring Criteria </strong> <strong> B.E or above. 3-5 years of experience at same position in similar technology power plant. </strong> <strong> Internal Promotion Criteria <br><br></strong>Position Summary:<br><br>The Mechanical Engineer will be accountable to supervise a team of maintenance technicians and support staff to fulfill the day to day mechanical maintenance activities at the power and desalination plant. In addition to supporting the management of the major outages of the plant through the provision of a gas turbine long-term service agreement, ensuring that the plant meets Safety, Environmental, availability, reliability, efficiency, and budgetary targets.<br><br>Functions/ Task:<br><br><strong> Safety at Work <br><br></strong><ul><li> Ensures the compliance of IMS. Ensure a safe working environment for himself, his colleagues and contractors while working on any equipment </li><li> Obtains a Permit to Work for each job as necessitated by the safety and associated Procedures </li><li> Ensures all Method Statements Work Instruction and Procedures are followed by himself and Contractors while undertaking any work </li><li> Ensures that all appropriate tools are available to ensure work can be carried out safely on equipment </li><li> Supervises Mechanical Technicians and Contractors to ensure Safety Rules and HSE procedures are followed </li><li> Reports any unsafe conditions in accordance with procedure <br><br></li></ul><strong> Maintenance Task Planning and Execution <br><br></strong><ul><li> Ensures maintenance tasks are completed by the Technicians as per Work Orders generated in CMMS </li><li> Ensures work done notes on maintenance carried out is documented in CMMS </li><li> Produce reports as necessary on any maintenance activity </li><li> Plans for and ensures that maintenance of all mechanical equipment is in accordance with OEM manuals and best practices for the equipment </li><li> Along with the Lead Engineer, ensures mechanical maintenance planning is correctly scheduled so that all equipment is maintained as per recommended intervals </li><li> Reviews Mechanical Maintenance Procedures and suggests where they can be improved <br><br></li></ul><strong> Equipment Failure Trouble Shooting and Repair <br><br></strong><ul><li> Supports the 24-hour operation by being regularly available for call-out at short notice </li><li> Attempts all possible means of reducing equipment downtime and ensuring high plant availability </li><li> Performs trouble shooting activities as necessary to determine failure conditions and rectifies defects found; </li><li> Records and reports to the Lead Engineer all rectification jobs undertaken </li><li> Generates reports of equipment failures </li><li> Performs Root Cause Analysis of Failures </li><li> Works with Plant Operations Personnel for resolving problems encountered with mechanical equipment. <br><br></li></ul><strong> Reporting and Planning and Budgeting <br><br></strong><ul><li> Discusses planned and unplanned jobs undertaken with the Lead Engineer </li><li> Works with the Lead Engineer for outage planning and execution </li><li> Assists the Lead Engineer in planning and budget preparation processes. <br><br></li></ul><strong> Spares, Consumables and Use of Tools and Equipment <br><br></strong><ul><li> Ensures adequate inventories of spares and consumables are maintained </li><li> Places requisitions for purchase of required spares and consumables </li><li> Ensures necessary tools and equipment is available to all Technicians </li><li> Ensures appropriate certification of all tools is done on a routine basis </li><li> Ensures all tools and equipment are appropriately maintained and are in good working condition <br><br></li></ul><strong> Provision of technical advice: <br><br></strong><ul><li> Delivers technical advice to colleagues and Contractors to ensure safety and the proper execution of Plant Maintenance Practices </li><li> Applies engineering knowledge and skills to review and update task lists for equipment. </li><li> Implements initiatives to address inconsistencies in CMMS scheduling, practices and documentation. <br><br></li></ul><strong> Staff Development: <br><br></strong><ul><li> Coaches Mechanical Technicians on a range of mechanical equipment, Safe Work Procedures and Operational Techniques to ensure proper execution of Plant Routines </li><li> Prepares and delivers Technical Training, including modules on GT &amp; ST, alignment techniques, valves, pump repairs, compressors, dryers, HRSG component inspections and BOP plant equipment. <br><br></li></ul><strong> Frame works, Boundaries, &amp; Decision Making Authority: <br><br></strong><ul><li> The jobholder operates under the general guidance of the Lead Engineer on all routine issues related to plant operations and team management </li><li> The jobholder is free to plan and manage own areas of activity within policy/procedural boundary limits Any extraordinary issues arising outside of set policies and procedures are referred to the Engineering Manager/Lead Engineer for discussion and approval of recommended actions <br><br></li></ul>Accountable for Outcomes:<br><br>Continuous on-the-job application of safety rules and HSE procedure<br><br>Frequency of Safety Incidents and near misses.<br><br>Lost Time Injury Frequency Rate (LTIFR)<br><br>No HSE compliance breaches.<br><br>Closed out Work Orders<br><br>Efficiency at work<br><br>Quality of Work<br><br>Quality of reports<br><br>Efficiency troubleshooting<br><br>RCA and follow-up action<br><br>Accuracy of outage planning<br><br>Accuracy of forecast budget<br><br>Downtime due to unavailability of necessary spares and consumables<br><br>Condition and quantity of available tool and equipment<br><br>Quality and accuracy of documentation<br><br>Skill of Technicians and quality of work<br><br>Staff feedback<br><br>Business Unit: GBU Flexible Gen &amp; Retail<br><br>Division: Thermal AMEA - KSA<br><br>Legal Entity: JUBAIL O&amp;M COMPANY LIMITED<br><br>Company Name: ENGIE Saudi Arabia<br><br>Minimum Base Salary:<br><br>Maximum Base Salary:<br><br>Pay Basis: