Document Controller

ملخص الوظيفةمسؤول عن متابعة ومراقبة تكاليف المشاريع والعمليات التشغيلية، والتأكد من الالتزام بالميزانيات المعتمدة، وتحليل المصروفات والانحرافات المالية، وإعداد التقارير الدورية التي تساعد الإدارة في اتخاذ القرارات وتحسين كفاءة الإنفاق وتقليل التكاليف.المهام الوظيفيةمتابعة التكاليف الفعلية ومقارنتها بالميزانية المعتمدة.إعداد تقارير دورية عن المصروفات والتكاليف.مراقبة الانحرافات بين الميزانية والتكلفة الفعلية وتحليل أسبابها.مراجعة طلبات الشراء والفواتير والمصروفات والتأكد من صحتها.إعداد توقعات للتكاليف المستقبلية (Forecast).التأكد من تسجيل جميع التكاليف بشكل صحيح وفي الفترة المالية المناسبة للمخازن والمستودعاتالإشراف على استلام جميع التوريدات ومطابقتها مع أوامر الشراء والكميات المستلمةالإشراف على صرف المواد يوميًا من المستودعات الرئيسية إلى صالات الإنتاج بناءً على احتياجات وأوامر الإنتاج المعتمدة.استرجاع المواد غير المستخدمة من صالات الإنتاج في نهاية اليوم وتسجيلها كمسترجعات في النظامإجراء جرد دوري للمستودعات الرئيسية وصالات الإنتاج ومطابقة المخزون الفعلي مع النظام والتحقيق في أي فروقات.متابعة مستويات المخزون والتأكد من صحة أرصدة المواد وحركاتها.تسجيل ومتابعة جميع حالات الهدر في المستودعات وصالات الإنتاجإعداد تقرير لكل حالة هدر يتضمن الصنف، الكمية، التكلفة، الموقع، والسبب.تحليل أسباب الهدر ومتابعة نسبه بشكل دوري واقتراح الإجراءات اللازمة لتقليله.التأكد من أن جميع كميات الهدر مسجلة بشكل صحيح في النظام ولا يوجد هدر غير موثق.التأكد من إدخال جميع الوصفات في النظام بالكميات والأوزان الصحيحة بالتنسيق مع الشيف الرئيسي.التأكد من التزام فريق الإنتاج بالكميات والأوزان المعتمدة في الوصفات وعدم وجود صرف زائد عن المعايير المحددة.مراجعة الوصفات بشكل دوري والتأكد من أن تكلفة كل وصفة في النظام تعكس الاستهلاك الفعلي.إجراء اختبارات فعلية ودورية داخل المطبخ لقياس الوزن قبل وبعد الـديفورس، والتنظيف، والتحضير، والطبخ.إجراء اختبارات ومراجعات دورية للتأكد من التزام فريق التشغيل بالأوزان والكميات المعتمدةالتحقيق في أي فروقات غير طبيعية بين الاستهلاك المتوقع والاستهلاك الفعلي.وضع جدول دوري لمعايرة الموازين والتأكد من تنفيذ المعايرة وتوثيقها.التأكد من عدم استخدام أي ميزان أو أداة قياس غير دقيقة قد تؤثر على الكميات أو تكلفة المنتج.متابعة أوامر الشراء والعقود وأي تغييرات في أسعار المواد قد تؤثر على تكلفة المنتجات.اقتراح إجراءات عملية لخفض الهدر وتحسين استخدام المواد وتقليل تكلفة الإنتاج دون التأثير على جودة المنت<br>المهارات المطلوبة مهارات قوية في تحليل التكاليف والبيانات المالية.إجادة استخدام Microsoft Excel وإعداد التقارير والتحليلات.القدرة على إعداد التقارير المالية وتقارير التكاليف بشكل دوري.القدرة على التواصل والتنسيق مع الإدارة المالية والأقسام التشغيلية.القدرة على إعداد ومتابعة الميزانيات والتنبؤ بالتكاليف.

<h3>About the Role</h3><p>Intrepid Acquisition Holdings, LLC is seeking an <strong>OCN/LN Monitor (Escort)</strong> to join their team at Prince Sultan Air Base in Riyadh, Saudi Arabia. This full-time role involves escorting un-cleared personnel into restricted areas and monitoring their activities while work is being performed. The position requires diligent tracking of personnel and vehicles, ensuring compliance with security protocols.</p><h3>Key Responsibilities</h3><ul><li>Provide comprehensive escorting coverage for Local National (LN) and Other Country National (OCN) personnel.</li><li>Meet LN/OCN personnel at designated entry facilities after their processing and badge issuance, providing briefings on site rules and procedures.</li><li>Escort LN/OCN personnel throughout their daily work, ensuring their presence until work completion, work zone purging by Force Protection military personnel, and their exit from the base or return to camps.</li><li>Prevent LN/OCNs from bringing prohibited or contraband items (*, weapons, drugs) onto the base.</li><li>Maintain continuous visual contact with all escorted vehicles and personnel.</li><li>Ensure the safety and welfare of oneself and escorted personnel, including evacuation to protective shelter during an attack.</li><li>Log in and out all LN/OCN contractors and conduct personnel counts before and after duties.</li><li>Notify appropriate personnel regarding the number of escorted individuals and vehicles.</li><li>Report unsafe working conditions to the Project/Site Manager and Safety staff promptly.</li><li>Ensure strict adherence to proper housekeeping practices.</li><li>Maintain a state of readiness to respond appropriately to any situation and alert relevant personnel to suspicious behaviors or comments from LN/OCNs.</li><li>Perform other duties as assigned.</li></ul><h3>Work Environment</h3><p>This role operates within Prince Sultan Air Base in Riyadh, Saudi Arabia, requiring constant vigilance and adherence to strict security protocols. The position involves direct interaction with various personnel and requires a proactive approach to safety and security.</p><h3>Application Process</h3><p>Candidates interested in this full-time OCN/LN Monitor (Escort) position are encouraged to apply. Further details regarding the application process will be provided upon inquiry.</p>

ملخص الوظيفةمسؤول عن متابعة ومراقبة تكاليف المشاريع والعمليات التشغيلية، والتأكد من الالتزام بالميزانيات المعتمدة، وتحليل المصروفات والانحرافات المالية، وإعداد التقارير الدورية التي تساعد الإدارة في اتخاذ القرارات وتحسين كفاءة الإنفاق وتقليل التكاليف.المهام الوظيفيةمتابعة التكاليف الفعلية ومقارنتها بالميزانية المعتمدة.إعداد تقارير دورية عن المصروفات والتكاليف.مراقبة الانحرافات بين الميزانية والتكلفة الفعلية وتحليل أسبابها.مراجعة طلبات الشراء والفواتير والمصروفات والتأكد من صحتها.إعداد توقعات للتكاليف المستقبلية (Forecast).التأكد من تسجيل جميع التكاليف بشكل صحيح وفي الفترة المالية المناسبة للمخازن والمستودعاتالإشراف على استلام جميع التوريدات ومطابقتها مع أوامر الشراء والكميات المستلمةالإشراف على صرف المواد يوميًا من المستودعات الرئيسية إلى صالات الإنتاج بناءً على احتياجات وأوامر الإنتاج المعتمدة.استرجاع المواد غير المستخدمة من صالات الإنتاج في نهاية اليوم وتسجيلها كمسترجعات في النظامإجراء جرد دوري للمستودعات الرئيسية وصالات الإنتاج ومطابقة المخزون الفعلي مع النظام والتحقيق في أي فروقات.متابعة مستويات المخزون والتأكد من صحة أرصدة المواد وحركاتها.تسجيل ومتابعة جميع حالات الهدر في المستودعات وصالات الإنتاجإعداد تقرير لكل حالة هدر يتضمن الصنف، الكمية، التكلفة، الموقع، والسبب.تحليل أسباب الهدر ومتابعة نسبه بشكل دوري واقتراح الإجراءات اللازمة لتقليله.التأكد من أن جميع كميات الهدر مسجلة بشكل صحيح في النظام ولا يوجد هدر غير موثق.التأكد من إدخال جميع الوصفات في النظام بالكميات والأوزان الصحيحة بالتنسيق مع الشيف الرئيسي.التأكد من التزام فريق الإنتاج بالكميات والأوزان المعتمدة في الوصفات وعدم وجود صرف زائد عن المعايير المحددة.مراجعة الوصفات بشكل دوري والتأكد من أن تكلفة كل وصفة في النظام تعكس الاستهلاك الفعلي.إجراء اختبارات فعلية ودورية داخل المطبخ لقياس الوزن قبل وبعد الـديفورس، والتنظيف، والتحضير، والطبخ.إجراء اختبارات ومراجعات دورية للتأكد من التزام فريق التشغيل بالأوزان والكميات المعتمدةالتحقيق في أي فروقات غير طبيعية بين الاستهلاك المتوقع والاستهلاك الفعلي.وضع جدول دوري لمعايرة الموازين والتأكد من تنفيذ المعايرة وتوثيقها.التأكد من عدم استخدام أي ميزان أو أداة قياس غير دقيقة قد تؤثر على الكميات أو تكلفة المنتج.متابعة أوامر الشراء والعقود وأي تغييرات في أسعار المواد قد تؤثر على تكلفة المنتجات.اقتراح إجراءات عملية لخفض الهدر وتحسين استخدام المواد وتقليل تكلفة الإنتاج دون التأثير على جودة المنت<br>المهارات المطلوبة مهارات قوية في تحليل التكاليف والبيانات المالية.إجادة استخدام Microsoft Excel وإعداد التقارير والتحليلات.القدرة على إعداد التقارير المالية وتقارير التكاليف بشكل دوري.القدرة على التواصل والتنسيق مع الإدارة المالية والأقسام التشغيلية.القدرة على إعداد ومتابعة الميزانيات والتنبؤ بالتكاليف.

<p>Overview:</p><p><br></p><p>The Monitor is responsible for producing, editing, and monitoring high-quality visual content across Al-Qadsiah Club’s media platforms. This role combines video editing with graphic design and motion graphics animation to ensure engaging, on-brand content that supports the club’s media, marketing.</p><p><br></p><p><br></p><p>Key Responsibilities:</p><p><br></p><p>Edit and produce video content for digital platforms, social media, and internal use.</p><p>Design and animate motion graphics for videos, campaigns, and matchday content.</p><p>Create visual assets that align with Al-Qadsiah Club’s brand guidelines and identity.</p><p>Monitor visual quality, consistency, and performance of published content.</p><p>Collaborate with Media, Social Media, and Branding teams to execute creative concepts.</p><p>Support live events, match coverage, and campaigns with timely edited content.</p><p>Manage video files, assets, and archiving according to department standards.</p><p>Ensure deadlines are met while maintaining high creative and technical standards.</p><p><br></p><p><br></p><p><br></p><p>Requirements</p><p>Education:</p><p>Bachelor’s degree in Media Production, Graphic Design, Multimedia, Visual Communication, or a related field.</p><p><br></p><p>Experience:</p><p>2–4 years of experience in video editing, motion graphics, or multimedia production.</p><p>Proven experience in editing and animating content for digital and social media platforms.</p><p><br></p><p>Skills:</p><p>Strong video editing skills (e.g., Adobe Premiere Pro, Final Cut Pro).</p><p>Advanced motion graphics and animation skills (e.g., After Effects).</p><p>Graphic design skills (e.g., Photoshop, Illustrator).</p><p>Strong sense of visual storytelling, timing, and branding.</p><p>Ability to work under pressure and meet tight deadlines.</p><p>Attention to detail and strong creative judgment.</p><p>Fluent in Arabic and English is preferred.</p><p><br></p><p>Certifications:</p><p>Professional certifications in video editing, motion graphics, or design are an advantage.</p><p><br></p><p>Preferred Qualifications:</p><p><br></p><p>Experience working in sports clubs, media agencies, or entertainment environments.</p><p>Experience producing matchday, highlight, and campaign content.</p><p>Knowledge of social media content formats and platform requirements.</p><p>Basic knowledge of filming and camera operations is a plus.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

Location: Taif, KSAEmployment Type: Full-Time Job Overview We’re looking for energetic, outgoing, and safety-focused Court Monitors / Party Hosts to bring the fun to life on and off the trampolines. This is a highly interactive role—perfect for someone who loves working with people, keeping energy high, and making sure guests have a safe, unforgettable experience. Key Responsibilities Actively supervise trampoline courts and enforce safety rules Engage with guests to create a fun, inclusive atmosphere Host birthday parties and group events from start to finish Lead games, activities, and group warm-ups Ensure party rooms are set up, clean, and ready on time Assist with crowd control during busy sessions Respond calmly and professionally to incidents or guest concerns Job Requirements Energetic, confident, and comfortable speaking to groups Strong awareness of safety and willingness to enforce rules Ability to work flexible shifts, including weekends, evenings, and holidays Physically able to stay active on the park floor Required Skills Great communication and customer interaction skills Ability to stay alert, focused, and responsible Team-player mindset with a positive attitude Confidence, enthusiasm, and reliability Basic problem-solving and time-management skills Why Join Us? Fun, high-energy work environment Perfect role for building confidence and people skills Training, support, and opportunities to grow

<p>Build the Future with JASARA Jasara is continuously seeking talented professionals to join our growing network of experts for current and future Construction Supervision (CS) opportunities across the Kingdom of Saudi Arabia. As a key delivery partner supporting some of the Kingdom's most ambitious development programs, Jasara supervises major projects across sectors including mixed-use developments, residential communities, commercial facilities, hospitality, healthcare, education, infrastructure, and public realm developments. We are currently building a talent pool of qualified professionals for anticipated project requirements across multiple regions of Saudi Arabia. Jasara is currently engaged in an upcoming framework agreement for construction supervision in several regions across KSA (EOI)</p><p>Provide senior commercial and cost management support within the Supervision Consultant team, reviewing Contractor valuations, variations, measurements, and commercial submissions.</p><p>Key Responsibilities</p><ul><li>Review Contractor interim payment applications and measurements.</li><li>Verify quantities and completed works in coordination with site teams.</li><li>Review variations, claims, and additional works.</li><li>Monitor project costs against the approved budget.</li><li>Review Contractor commercial submissions and supporting documentation.</li><li>Identify potential cost impacts and commercial risks.</li><li>Maintain quantity and cost records.</li><li>Provide commercial input to project reports and meetings.</li><li>Support contract administration and final account activities.</li></ul><p>Project Locations</p><p>Potential opportunities may arise across:</p><ul><li>Central Region (Riyadh)</li><li>Western Region (Jeddah)</li><li>Western Region (Makkah - Madinah)</li><li>Eastern Region (Khobar - Dammam)</li><li>Southern Region (Aseer - Jazan Najran)</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Quantity Surveying, Civil Engineering, Construction Management, or related field.</li><li>15+ years of relevant experience .</li><li>Previous experience in construction supervision/consultancy.</li><li>Strong experience in measurement, valuations, variations, claims, and cost control.</li><li>Strong understanding of BOQs, drawings, specifications, and construction costs.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>Job Title: </strong>Superintendent, Mine Planning</span></p><br> <br> <p><span><strong>Reporting to: </strong>Mine Manager</span></p><br> <br> <p><span><strong>Business Unit / Function: </strong>GGM</span></p><br> <br> <p><span><strong>Department: </strong>Mining</span></p><br> <br> <p><span><strong>Why This Role Matters</strong></span></p><br> <br> <p><span>Develops and maintains short-term, medium-term, and life-of-mine plans in coordination with Geology, Mining Operations, Processing, and Technical Services to achieve production and business targets.</span></p><br> <br> <p><span><strong>What You Will Deliver</strong></span></p><br> <br> <p><span><strong>Mine Planning and Design</strong></span></p><br> <br> <ul> <li><span>Develops and maintains short-, medium-, and long-term mine plans with relevant technical and operational functions.</span></li> </ul> <br> <ul> <li><span>Produces and reviews mine designs, production schedules, extraction sequences, and development plans to optimize resource utilization, safety, efficiency, and cost effectiveness.</span></li> </ul> <br> <ul> <li><span>Coordinates with Geology to incorporate resource models, reserve updates, and grade control information into plans and production forecasts.</span></li> </ul> <br> <p><span><strong>Performance and Optimization</strong></span></p><br> <br> <ul> <li><span>Monitors actual mining performance against approved plans, analyzes variances, identifies constraints and risks, and recommends corrective actions.</span></li> </ul> <br> <ul> <li><span>Conducts mine optimization studies and evaluates mining methods, equipment requirements, and operational strategies to maximize resource recovery and minimize operating costs.</span></li> </ul> <br> <ul> <li><span>Drives continuous improvement opportunities within mine planning processes, systems, and technologies.</span></li> </ul> <br> <p><span><strong>Business Planning and Technical Governance</strong></span></p><br> <br> <ul> <li><span>Prepares annual operating plans, production forecasts, manpower requirements, budgets, and capital expenditure proposals for mine planning and development.</span></li> </ul> <br> <ul> <li><span>Maintains the accuracy, integrity, and availability of mine planning data, survey information, and technical reports.</span></li> </ul> <br> <br> <ul> <li><span>Leads technical studies, feasibility assessments, mine expansion plans, and resource utilization reports.</span></li> </ul> <br> <ul> <li><span>Reviews and approves planning deliverables, technical reports, designs, and schedules against company standards, regulatory requirements, and industry best practices.</span></li> </ul> <br> <p><span><strong>People and HSE</strong></span></p><br> <br> <ul> <li><span>Supervises Mine Planning personnel, provides technical guidance and coaching, and deploys department resources effectively.</span></li> </ul> <br> <ul> <li><span>Implements HSE requirements in planning activities and participates in risk assessments and incident investigations.</span></li> </ul> <br> <p><span><strong>What Success Looks Like</strong></span></p><br> <br> <ul> <li><span>Short-, medium-, and life-of-mine plans align with approved production and business objectives.</span></li> </ul> <br> <ul> <li><span>Mine designs, schedules, forecasts, and technical reports are accurate, available, and compliant with company and regulatory requirements.</span></li> </ul> <br> <ul> <li><span>Planning variances, constraints, and risks are identified and addressed through timely corrective recommendations.</span></li> </ul> <br> <ul> <li><span>Mine planning activities improve resource recovery, operating efficiency, and cost effectiveness while meeting HSE requirements.</span></li> </ul> <br> <p><span><strong>Minimum Qualifications</strong></span></p><br> <br> <ul> <li><span>Bachelor’s degree in Mining Engineering.</span></li> </ul> <br> <p><span><strong>Experience</strong></span></p><br> <br> <ul> <li><span>Eight to ten years of mining experience, including significant experience in mine planning and scheduling.</span></li> </ul> <br> <p><span><strong>Skills That Matter</strong></span></p><br> <br> <ul> <li><span>Good knowledge of English</span></li> </ul> <br> <ul> <li><span>Achievement Orientation</span></li> </ul> <br> <ul> <li><span>Teamwork</span></li> </ul> <br> <ul> <li><span>Ethics and Values</span></li> </ul> <br> <br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> No experience required </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

We are looking for a Monitoring and Operations Specialist to join a technical team specialized in system monitoring and operations.

We are seeking a highly experienced Project Controls Department Manager to lead project controls across a major portfolio of infrastructure projects. The role will oversee cost management, planning and scheduling, change control, document management, reporting, testing and commissioning coordination, and overall project controls governance. Key Responsibilities Lead project controls covering cost, schedule, budget, forecasting, change management, and performance reporting. Develop and maintain portfolio-level schedules, master schedules, baselines, stage-gate schedules, and recovery plans. Monitor project budgets, commitments, actual costs, cash flow, invoices, and consolidated cost reports. Review contractor baseline schedules, schedule performance, corrective actions, and recovery plans. Implement project controls processes, procedures, reporting standards, and Stage-Gate requirements. Support contract preparation through schedule, cost, milestone, document management, and testing & commissioning inputs. Oversee document management systems, archiving, record control, and compliance across projects. Manage testing and commissioning requirements and associated project resources. Assess team capability, define roles and responsibilities, and support knowledge transfer and capability development. Drive continuous improvement and adoption of international project controls best practices.<br>Requirements Bachelor’s degree in Engineering from an accredited university. Minimum 20 years’ experience in project controls, planning and scheduling, including senior management responsibility on large-scale projects. Strong expertise in cost engineering, cost control, planning, scheduling, forecasting, and performance analysis. Advanced knowledge of engineering, procurement, contracts, construction, and project start-up processes. Strong experience reviewing contractor schedules and project performance. Professional proficiency in Primavera P6 and EPPM. Demonstrated leadership and team management capability. International experience, with Saudi Arabia experience preferred. Excellent written and verbal communication skills.

We are seeking a highly experienced Project Controls Department Manager to lead project controls across a major portfolio of infrastructure projects. The role will oversee cost management, planning and scheduling, change control, document management, reporting, testing and commissioning coordination, and overall project controls governance. Key Responsibilities Lead project controls covering cost, schedule, budget, forecasting, change management, and performance reporting. Develop and maintain portfolio-level schedules, master schedules, baselines, stage-gate schedules, and recovery plans. Monitor project budgets, commitments, actual costs, cash flow, invoices, and consolidated cost reports. Review contractor baseline schedules, schedule performance, corrective actions, and recovery plans. Implement project controls processes, procedures, reporting standards, and Stage-Gate requirements. Support contract preparation through schedule, cost, milestone, document management, and testing & commissioning inputs. Oversee document management systems, archiving, record control, and compliance across projects. Manage testing and commissioning requirements and associated project resources. Assess team capability, define roles and responsibilities, and support knowledge transfer and capability development. Drive continuous improvement and adoption of international project controls best practices.<br>Requirements Bachelor’s degree in Engineering from an accredited university. Minimum 20 years’ experience in project controls, planning and scheduling, including senior management responsibility on large-scale projects. Strong expertise in cost engineering, cost control, planning, scheduling, forecasting, and performance analysis. Advanced knowledge of engineering, procurement, contracts, construction, and project start-up processes. Strong experience reviewing contractor schedules and project performance. Professional proficiency in Primavera P6 and EPPM. Demonstrated leadership and team management capability. International experience, with Saudi Arabia experience preferred. Excellent written and verbal communication skills.

MAIN PURPOSE OF JOBResponsible for ensuring mechanical works meet project specifications, quality standards, and client requirements. Performs detailed inspections, technical approvals, NCR management, and supports in continuous improvement of mechanical quality performance.<br>DUTIES AND RESPONSIBILITIESConduct detailed inspections of mechanical works to ensure compliance with approved drawings, specifications, and standards. Review and approve inspection test results, measurements, and related documentation. Identify, document, and report Non-Conformance Reports (NCRs) and follow up on corrective actions. Support Root Cause Analysis (RCA) and implementation of corrective and preventive actions. Provide technical support and guidance to team leaders and inspectors on mechanical quality matters. Review mechanical designs, installations, and completed works for conformity with project requirements. Prepare and maintain detailed inspection reports, quality records, and inspection logs. Attend Hold Point (HP) and Witness Point (WP) inspections. Address client/consultant comments and support continuous process improvement and lessons learned.• Ensure compliance with ISO 9001, project QMS, and participate in internal quality audits SAFETY AND QUALITY RESPONSIBILITIESProtect, and strive for improvement of, the health, safety and security of our people at all times;Eliminate Quality non-conformances and HSE accidents;Ensure consistent and continuous compliance by all employees and vendors with safety and regulatory requirements, standards and protocols Responsible for creating safe work environment, manage risks and reduce exposure to liability Support line Management in managing HSE Incidents, corrective/preventive actions<br>SOCIAL COMPLIANCE RESPONSIBILITIESMaintain company’s social management system policy via follow and report any deviated cases against PSP IMS policy. Take his own responsibility to comply with the social accountability requirements according to the standard SA8000. Co-operate with the SP team for any further communication in order to improve and enhance the level of implementation and compliance with the company’s social management system.<br>REQUIRED FUNCTIONAL QUALIFICATIONBasic Requirements:Qualification: Bachelor of Mechanical Engineering. Related Field Experience: +5 years of experience in related field. Overall Experience: +5 years of experience.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Location:</b></p><br><br>Dammam, Eastern Region, Saudi Arabia<br><p><b>Job ID:</b></p><br><br>R0146546<br><p><b>Date Posted:</b></p><br><br>2026-11-04<br><p><b>Company Name:</b></p><br><br>HITACHI ENERGY LTD<br><p><b>Profession (Job Category):</b></p><br><br>Quality Management<br><p><b>Job Schedule:&nbsp;</b></p><br><br>Full time<br><p><b>Remote:</b></p><br><br>No<br><p><b>Job Description:</b></p><br><br><p><b>The opportunity</b></p><br><br><p>The Quality Control Technician Intern (6 Months) supports the quality team in ensuring products, materials, and processes meet company quality standards and customer requirements. The intern will gain hands-on experience in inspection techniques, quality documentation, and continuous improvement activities within a manufacturing environment.</p><br><br><p>​ <b>How you’ll make an impact&nbsp;</b></p><br><br><ul><li>Ensure a safe environment by implementing HSE requirements.</li><li>Conduct visual/dimensional inspection of purchased parts, materials, samples and assemblies.</li><li>Document inspection results as required.</li><li>Report to quality engineer /Quality manager on any deviations observed during incoming inspection.</li><li>Create quality inspection records, apply the visual indications on the inspected parts as per procedures.</li><li>Create Nonconformity reports and keeping track of the status.</li><li>Record and track daily IQC inspection backlog.</li><li>Maintain traceability of component materials as to inspection status.</li><li>Handle materials in accordance to procedures and prevent mix-ups, damage or other adverse effects.</li><li>Log/track materials through receiving inspection process and SAP entries.</li><li>Record transactions and move materials to accepted material area.</li><li>Communicate inspection results to Quality engineers and other relevant persons.</li><li>Refer to verify assembly documentation accuracy, read engineering drawings etc.</li><li>Performs any other projects or duties that may be assigned.</li><li>Collaborate with other departments for deviation detection, root cause analysis and correction measures implementation.</li><li>Support failure analysis, trouble shooting, site visit, reporting &amp; quality process, use A3 template in analysis</li><li>Employee shall also carry out any tasks that are assigned by management necessary to fulfil the job requirements.</li><li>You will be responsible for ensuring compliance with applicable external and internal regulations, procedures, and guidelines.</li><li>Living Hitachi Energy core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.</li></ul><br><p><b>Your background</b></p><br><br><ul><li>Diploma in Electrical or Mechanical is required.</li><li>0-2 Years’ experience.</li><li>Quality Control/Quality Assurance.</li><li>Knowledge to read drawings.</li><li>MS office and computer skills.</li><li>Hands on Inspection of material and use of tools to measurement.</li><li>Influencing Continuous Improvement and decision making and time Management.</li><li>Proficiency in both spoken &amp; written in English &amp; Arabic language is required.</li></ul><br><br><p><b>Accessibility and reasonable accommodation</b></p><br><br><p><b>Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a </b><span><b><u>general inquiry form</u></b></span><b> on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.</b></p><br><br><br><p><b>This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.</b></p><br><br><br><p><b>Use of Al and automated tools in recruitment</b></p><br><br><p><b>As part of our recruitment process, Hitachi Energy uses digital and automated tools, including Al-supported solutions, to assist with activities such as application screening, job matching, and interview scheduling. These tools are designed to support our recruiters and do not replace human decision-making. Candidate data is processed in accordance with applicable data protection and employment laws as well as </b><span><b><u>Hitachi's Global Data Privacy Notice.</u></b></span><b><br><span>Background Screening and Security Checks</span></b></p><br><br><p><b><span>As part of the hiring process, Hitachi Energy conducts pre-employment background checks that may include verification of employment history, education, criminal records, and other relevant information, in accordance with applicable laws.</span></b></p><br><br><p><b><span>For certain roles—particularly those involving access to sensitive information, financial responsibilities, client data, regulated environments, or security-sensitive functions—additional or more comprehensive background or security screenings may be required. These may include, but are not limited to, enhanced criminal history checks, credit history reviews (where legally permissible), sanctions screening, or other due diligence measures aligned with the responsibilities of the position.</span></b></p><br><br><p><b><span>The scope and depth of any background or security review will be determined based on the nature of the role and business necessity, and will always be conducted in compliance with applicable federal, state, and local laws. Candidates will be notified and, where required, asked to provide consent prior to the initiation of any such checks.</span></b></p><br><br><br> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 1+ years </div> </div> <div class="row is-m v-align-top t-small "> <div class="col is-3 p5" data-automation-id="label_Degree"> <b>Degree</b> </div> <div class="col is-9 p5" data-automation-id="data_Degree"> Bachelor's degree / higher diploma </div> </div>

Chemical Engineer Tasks Process Design: Developing methods to transform chemical and physical materials into usable products.<br>Plant Management: Overseeing the operation of production units and monitoring performance in large facilities. Troubleshooting: Detecting operational failures in production lines and improving equipment efficiency.<br>Safety Standards: Ensuring product safety, protecting the environment, and the safe disposal of waste.

Job Summary: The QC Inspector performs inspection and testing of piping, civil, and mechanical construction activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>Duties & Responsibilities:<br><br>Perform in-process and final inspections on piping, civil, and mechanical works. Witness hydrotests, NDE activities, and other required tests per the ITP. Verify materials, welding, and installation against approved drawings and specifications. Record inspection results and raise Non-Conformance Reports as required. Coordinate hold points and inspections with client/third-party inspectors. Maintain inspection records, checklists, and daily QC reports. Verify calibration status of measuring and test equipment used on site. Support punch-list generation and verification of closure. Ensure work fronts comply with approved method statements. Report quality issues and trends to the QC Manager. Support preparation of quality documentation for handover dossiers.<br><br>Requirements<br><br>Experience: 5+ years of experience as a QC Inspector on piping/civil/mechanical construction projects.<br><br>Education:<br><br>Diploma or Bachelor's degree in Mechanical/Civil Engineering. QC/inspection certification (e.g., CSWIP, CWI) preferred.<br><br>Required Skills & Abilities:<br><br>1- Core Competencies:<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>2- Technical Skills:<br><br>Piping/Civil Inspection Techniques Reading Isometrics, P&IDs, and Civil Drawings Welding Inspection Basics / NDE Awareness Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting

SECTION I: Job Summary <br><br>The QC Inspector - Fireproofing performs inspection and testing of passive fireproofing application activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on fireproofing application works Verify surface preparation, primer, and fireproofing material application against specifications Witness thickness (DFT/WFT) checks and adhesion tests per the ITP Verify materials and batch certificates against approved specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment (thickness gauges) used on site Support punch-list generation and verification of closure for fireproofing works Ensure work fronts comply with approved method statements and fireproofing standards Support preparation of quality documentation for fireproofing handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Fireproofing/Passive Fire Protection Inspection Techniques Surface Preparation & Coating Application Standards Thickness (DFT/WFT) & Adhesion Testing Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on fireproofing/coating application projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical/Civil Engineering NACE/coating inspection certification preferred

SECTION I: Job Summary <br><br>The QC Inspector - Piping (UG) performs inspection and testing of underground piping installation activities, including trenching, bedding, coating, and backfill, to verify compliance with drawings, specifications, and applicable codes.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on underground piping installation works Witness trench excavation, pipe bedding, coating/wrapping, and backfill activities per the ITP Verify underground pipe alignment, depth, and joint integrity against approved drawings Witness hydrotests, holiday testing (coating integrity), and cathodic protection checks as required Verify materials (pipe, coating, bedding material) against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors prior to backfill Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for underground piping works Support preparation of quality documentation for underground piping handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances Hold point compliance prior to backfill Adherence to inspection schedules Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Underground Piping Inspection Techniques Trenching, Bedding & Backfill Inspection Coating/Wrapping & Holiday Testing Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on underground piping/utilities construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical/Civil Engineering QC/inspection certification preferred

The QC Inspector - Instrument performs inspection and testing of instrumentation construction activities to verify compliance with drawings, specifications, and applicable standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on instrumentation installation works Witness loop checks, calibration, and instrument testing activities per the ITP Verify instrument installation, tubing, and wiring against approved drawings and specifications Verify materials and instruments against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of test and measuring equipment used on site Support punch-list generation and verification of closure for instrumentation works Ensure work fronts comply with approved method statements and instrumentation standards Support preparation of quality documentation for instrumentation handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Instrumentation Inspection Techniques Reading Loop Diagrams & Instrument Datasheets Calibration & Loop Checking Verification Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on instrumentation construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Instrumentation Engineering QC/inspection certification preferred

SECTION I: Job Summary <br><br>The QC Inspector - Piping performs inspection and testing of piping fabrication and installation activities to verify compliance with isometrics, welding procedures, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on piping fabrication and installation works Witness hydrotests, NDE activities (RT/UT/PT/MT), and other required tests per the ITP Verify pipe fit-up, alignment, and welding against approved isometrics and WPS Verify materials, spools, and fittings against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for piping works Ensure work fronts comply with approved method statements and piping codes (ASME B31.3) Support preparation of quality documentation for piping handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time weld/inspection acceptance rate Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities<br><br>Core Competencies<br><br> Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Piping Inspection Techniques Reading Isometrics, P&IDs & Welding Maps Welding Inspection & NDE Awareness (RT/UT/PT/MT) Inspection & Test Plans (ITPs) Measuring & Testing Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education<br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on piping construction/fabrication projects<br><br>Education<br><br> Diploma or Bachelor's degree in Mechanical Engineering QC/inspection certification (e.g., CSWIP, CWI) preferred<br><br>SECTION VI: LEVEL OF AUTHORITY<br><br>Supervisory / Managerial: No supervisory responsibility.<br><br>Financial: No financial or budget authority.<br><br>SECTION VII: MISCELLANEOUS JOB-SPECIFIC REQUIREMENTS<br><br>General Profile / Specifications:<br><br> Field-based role requiring daily presence on active piping work fronts Exposure to site/construction conditions May require shift work or extended hours to cover inspection hold points

SECTION I: Job Summary <br><br>The QC Inspector - Structural performs inspection and testing of structural steel fabrication and erection activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on structural steel fabrication and erection works Witness structural bolting, welding, and alignment checks per the ITP Verify structural steel installation against approved drawings, erection plans, and tolerances Verify materials (structural steel, bolts, coatings) against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for structural works Ensure work fronts comply with approved method statements and structural codes (AISC, etc.) Support preparation of quality documentation for structural handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Structural Steel Inspection Techniques Reading Structural/Erection Drawings Bolting & Welding Inspection Standards (Structural) Inspection & Test Plans (ITPs) Measuring & Alignment Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on structural steel construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Civil/Structural Engineering QC/inspection certification preferred

SECTION I: Job Summary <br><br>The QC Inspector - Structural performs inspection and testing of structural steel fabrication and erection activities to verify compliance with drawings, specifications, and applicable codes and standards.<br><br>SECTION II: Job Analysis <br><br>Duties & Responsibilities<br><br> Perform in-process and final inspections on structural steel fabrication and erection works Witness structural bolting, welding, and alignment checks per the ITP Verify structural steel installation against approved drawings, erection plans, and tolerances Verify materials (structural steel, bolts, coatings) against material certificates and specifications Record inspection results and raise Non-Conformance Reports as required Coordinate hold points and inspections with client/third-party inspectors Maintain inspection records, checklists, and daily QC reports Verify calibration status of measuring and test equipment used on site Support punch-list generation and verification of closure for structural works Ensure work fronts comply with approved method statements and structural codes (AISC, etc.) Support preparation of quality documentation for structural handover dossiers<br><br>Requirements<br><br>SECTION III: Performance Indicators<br><br>Evaluated Based on<br><br> Inspection accuracy and completeness Timely identification and reporting of non-conformances First-time inspection pass rate on assigned work fronts Adherence to inspection schedules/hold points Quality of inspection documentation<br><br>SECTION IV: Required Skills & Abilities <br><br>Core Competencies<br><br>Attention to Detail Integrity Analytical Thinking Communication Skills Time Management<br><br>Technical Skills<br><br> Structural Steel Inspection Techniques Reading Structural/Erection Drawings Bolting & Welding Inspection Standards (Structural) Inspection & Test Plans (ITPs) Measuring & Alignment Equipment Use QC Documentation & Reporting<br><br>SECTION V: Required Experience and Education <br><br>Experience<br><br> 5-8 years of experience as a QC Inspector on structural steel construction projects<br><br>Education<br><br> Diploma or Bachelor's degree in Civil/Structural Engineering QC/inspection certification preferred