Provide engineering reviews, address operation, advise (directly and indirectly) best practices both in the tender and in the projects to the Project Operation Manager (or delegate) to assist in the achievement of project/tender objectives, according to the plan/procedures developed by the engineering project team.
The Engineer shall ensure compliance with QA/QC&HSE requirements and:
- Review project documentation reporting errors/omissions and suggest improvements considering advices from vessel operations management
- Assist in liaising with Client Representatives/subcontractors
- Assist in monitoring progress of work/site conditions and promptly advise if changes to project schedule/execution sequence may occur
- When onboard support Vessel Management Team in planning/execution of work/project contractual&technical requirements
- Participate to resolution of any technical problems
- Supervise execution of diving, precommissioning, post trenching and hook-up
- Provide operational input/support to onshore project teams
- Liaise with Installation Engineers during preparatory/mobilisation/installation phase
- Review installation procedures/loadout/seafastening plans for material/structures offshore transportation to ensure safe/timely installation
- Ensure completeness of construction materials/consumables lists liaising with Project Coordinator for timely procurement/delivery
- Coordinate with Mobile Equipment, Asset, Piptec, ROV, Trenching, precommissioning, Hook-up to ensure that all necessary personnel/equipment are timely available
- Witness/inspect pre-rigging/loadouts/seafastening activities
- Identify any deviations from procedures and manage as requested
- Coordinate with Fabrication Dept for loadout of fabricated structures/installation aids
- Provide input/feedback for engineering close out report to improve departmental standards/working methods/guidelines
- Lead project planning efficiency optimisation (installation aids re-use, tensioner pad change-outs, equipment mob/demob, ROV tooling consistency)
- Be involved in project HAZIDs/HIRAs and Track of tasks
- Verify that relevant schedules reconcile with present vessel productivity
- Assist with project management specific third-party contractors confirming all technical/operational contractual aspects are observed
- Provide technical assistance to all offshore personnel to permit work is implemented in accordance with approved procedure and Company's minimum standard
- Provide all necessary technical briefings to offshore personnel ensuring that overall project working/safety philosophy is fully understood by all personnel
- Assist vessels mobilisation/demobilisation to ensure that all equipment is handled in correct manner and everyone involved is aware of all safety/technical aspects of operation
- Note any contractual variations during project ensuring all necessary documentation is in place to support commercial claims disputed upon project completion and manage as requested
- Verify that procedures are correct and most efficient/cost effective solutions are followed
- Take part in most critical phases on board installation vessel/preparation yard
- Confront with the vessel for all most critical subject to assure a correct transfer from engineering to installation
- Distinguish rapidly missing points/optimisation of equipment used on board/in yards
- Prepare/record/participate in completion of feedback reporting (Lessons learnt, Offshore debriefs, end of project reporting)
- Promote/organise meetings for risk evaluation/revision of procedures with vessel management, ensuring that all work is carried safely and in accordance with HSE policies/procedures
- Actively participate in Job Safety analysis/Risk Assessments and ensure all findings/recommendations are implemented
- Review Daily progress reports
- Provide technical support to commercial department
- Coordinate/consolidate all inputs from multiple disciplines (Operations, Asset, Engineering) to support development of commercial proposal
- Be involved in preparing installation vessels' standard methods
- Assist, guide and train junior engineer
Desired Candidate Profile
Education: Master's Degree/bachelor's degree in: Engineering (preferred)
Languages: English Language skills required
Technical Knowledge: Experienced in vessel mobilization, offshore installation, heavy lifting
قدّم مراجعات هندسية، عالج التشغيل، قدِّم النصح (مباشرة وبشكل غير مباشر) لأفضل الممارسات سواء في المناقصة وفي المشاريع إلى مدير تشغيل المشروع (أو من يلي التفويض) للمساعدة في تحقيق أهداف المشروع/المناقصة، وفق الخطة/الإجراءات التي طورها فريق المشروع الهندسي.
يجب على المهندس ضمان الامتثال لمتطلبات QA/QC&HSE و:
- مراجعة وثائق المشروع للإبلاغ عن الأخطاء/السهو واقتراح التحسينات مع أخذ نصائح من إدارة عمليات السفن في الاعتبار
- المساعدة في التواصل مع ممثلي العميل/المقاولين من الباطن
- المساعدة في مراقبة تقدم العمل/ظروف الموقع وتبليغ الفور إذا قد تحدث تغييرات في جدولة المشروع/متسلسلة التنفيذ
- عند دعم السفينة على متنها، إدارة الفريق في التخطيط/تنفيذ متطلبات العمل/التعاقدية/التقنية للمشروع
- المشاركة في حل أي مشكلات تقنية
- الإشراف على تنفيذ الغوص، ما قبل التشغيل، الخُدْج ما بعد الحفر والربط
- تقديم المدخلات التشغيلية والدعم لفرق المشروع على الشاطئ
- التواصل مع مهندسي التركيب أثناء مرحلة التحضير/التعبئة/التركيب
- مراجعة إجراءات التركيب/خطط التحميل/التثبيت البحري للمواد/الهياكل لضمان التركيب الآمن وفي الوقت المحدد
- ضمان اكتمال قوائم مواد البناء/المستهلكات بالتنسيق مع منسق المشروع لضمان التوريد/التسليم في الوقت المناسب
- التنسيق مع المعدات المتنقلة، الأصول، Piptec، ROV، الحفر، ما قبل التشغيل، الربط لضمان توافر جميع الأفراد/المعدات اللازمة في الوقت المناسب
- شهادة/فحص عمليات التهيئة المسبقة/التثبيت البحري
- تحديد أي انحرافات عن الإجراءات وإدارتها عند الطلب
- التنسيق مع قسم التصنيع لتحميل الهياكل المصنَّعة/مساعدات التركيب
- تقديم المدخلات/التعليقات لتقرير الإغلاق الهندسي لتحسين معايير القسم/طرق العمل/الإرشادات
- قيادة تحسين كفاءة تخطيط المشروع (إعادة استخدام مساعدات التركيب، تغيير وسادات المشد، تعبئة/إخلاء المعدات، اتساق أجهزة ROV)
- المشاركة في HAZIDs/HIRAs للمشروع وتتبع المهام
- التحقق من أن الجداول ذات الصلة تتوافق مع إنتاجية السفينة الحالية
- المساعدة في إدارة المشاريع مع المقاولين من الأطراف الثالثة المحددين والتأكيد على الالتزام بجوانب التعاقد الفنية/التشغيلية
- تقديم المساعدة الفنية لجميع أفراد الأطقم البحرية لضمان تنفيذ العمل وفق الإجراءات المعتمدة والمعيار الأدنى للشركة
- توفير جميع الإيجازات الفنية الضرورية لأفراد الأطراف البحرية لضمان فهم فلسفة العمل/السلامة للمشروع بشكل كامل من قبل جميع الأفراد
- المساعدة في تعبئة تعبئة حركة السفن/إخلاءها لضمان التعامل الصحيح مع جميع المعدات وأن يكون الجميع على علم بجميع الجوانب السلامة/التقنية للعمل
- ملاحظة أي تغيرات عقدية أثناء المشروع لضمان وجود جميع المستندات اللازمة لدعم المطالبات التجارية المناقشة عند إكمال المشروع وإدارتها عند الطلب
- التحقق من صحة الإجراءات واتخاذ الحلول الأكثر كفاءة من حيث التكلفة
- المشاركة في المراحل الأكثر حرجاً على سفينة التركيب/ساحة التحضير
- التعامل مع السفينة لجميع المواضيع الأكثر حرجاً لضمان نقل صحيح من الهندسة إلى التركيب
- تمييز النقاط المفقودة بسرعة/تحسين المعدات المستخدمة على متن السفن وفي الحقول
- التحضير/التسجيل/المشاركة في إكمال تقارير التغذية الراجعة (دروس مستفادة، جلسات ما بعد البحر، تقارير نهاية المشروع)
- الترويج/تنظيم الاجتماعات لتقييم المخاطر/مراجعة الإجراءات مع إدارة السفينة، مع ضمان أن يتم العمل بأمان وبما يتفق مع سياسات/إجراءات HSE
- المشاركة بنشاط في تحليل السلامة الوظيفية/تقييمات المخاطر والتأكد من تنفيذ جميع النتائج/التوصيات
- مراجعة تقارير التقدم اليومية
- توفير الدعم الفني للقسم التجاري
- التنسيق/توحيد جميع المدخلات من تخصصات متعددة (العمليات، الأصول، الهندسة) لدعم تطوير العرض التجاري
- المشاركة في إعداد الطرق القياسية لسفن التركيب
- المساعدة، الإرشاد وتدريب المهندس junior
الملف المرشح المطلوب
التعليم: درجة الماجستير/درجة البكالوريوس في: الهندسة (المفضل)
اللغات: مهارات اللغة الإنجليزية مطلوبة
المعرفة التقنية: خبرة في تعبئة السفن، التركيب البحري، الرفع الثقيل