Purpose of the Job:The Vessel & Crane Operation Assistant is responsible to ensure that crane working list is always followed unless otherwise advised, to guide crane operator, and lashing gang, relate closely with vessel command and to follow crane work list, loading sequences, check condition of containers, seal, and guide tractors for proper positioning under cranes etc..
Key Accountabilities / Responsibilities:Take over paperwork from outgoing colleagues or documents for incoming vessel from vessel team leader. Proceed to assigned crane and plan next move. Take the workplace as VOA or COA according to assigned location by team leader. Check SVD manager assigned allocation (T01 | T02). Be available on time on the assigned location. Take the required signage for onboard assignment. Take Zello and sign on sign sheet. Take the required signage for onboard assignment. Prepare crane log to start crane updating. Check units for damage and inform vessel team leader for further action, or place container at quayside or guide Tractor to any special area assigned for such units. Check if extension wires of reefer plugs are proper secured to avoid any damage. Check of any other exceptions i.e. incorrect container no's etc and if noted immediately bring it to the notice of vessel team leader and control for further action. In case not manifested containers have to be discharged as per their stowage place them on quayside or guide tractor operator to any special area for such containers. During discharge of special lifts which cannot be discharged to normal tractors, guide to ensure safe discharge on to low bed or pre-arranged safe area. Follow crane work list unless otherwise advised by vessel team leader or control Check condition of containers prior to lift off by crane and report any exceptions to vessel team leader for further action. Follow loading sequence per crane working list unless otherwise advised by vessel team leader or control. Update all moves thru RDT. Guide tractor drives regarding positioning of vehicles during discharge/load operations. Ensure that all are without twist locks prior to moving to stacking area Ensure that hatch covers are properly grounded (in assigned areas) and lifted accordingly, guide crane operator in this regard Arrive for duty as per timing, and report to vessel team leader for assignment instructions. Take over paperwork from outgoing colleagues or receive documents of incoming vessels form Vessel team leader. Board vessel and proceed to point of work. Guide crane operator, lashers on next moves. Liaise with vessel crew about unplugging of reefers and any other specials. Strictly adhere to sequences unless otherwise advised by vessel tam leader/control room. Check condition of equipment if possible, during discharge/load operations and report any exceptions Update all completed moves thru RDT. Fill in crane log as instructed in legible handwriting. While on board follow prescribed safety measures and good conduct should be always maintained. Relate closely with vessel crew. Follow instructions of Vessel team leader regarding assignments.
Requirements:Able to identify and describe a problem. Deep understanding of core products related to job Demonstrating the ability to work effectively with other Able to use TOS system. Able to use VMT system.