نبذة عن شركة بكتل ومشروع الجبيل
تمتلك شركة بكتل تاريخاً يمتد لأكثر من 125 عاماً، حيث أنجزت أكثر من 25,000 مشروع في 160 دولة. تركز الشركة على أسواق البنية التحتية، والطاقة النووية، والأمن والبيئة، والطاقة، والتعدين والمعادن، والتصنيع والتكنولوجيا، وتقدم خدماتها بدءاً من التخطيط الأولي وصولاً إلى العمليات التشغيلية. يُعد مشروع الجبيل، الواقع في المنطقة الشرقية بالمملكة العربية السعودية، مشروعاً هندسياً مدنياً مهماً تديره شركة بكتل منذ منتصف السبعينيات. تعمل شركة بكتل العربية السعودية (SABCO) كمقاول لخدمات الإدارة للهيئة الملكية، حيث تشرف على أعمال الهندسة والمشتريات والإنشاءات التي تنفذها الشركات والمقاولون المحليون في مدينتي الجبيل ورأس الخير الصناعيتين. تم تجديد العقد في يونيو 2026 لمدة خمس سنوات أخرى، مع التركيز على المجتمعات السكنية الجديدة، والمعالم العمرانية، وتجهيز المواقع، والمباني التجارية، والتطوير الواسع للمرافق والبنية التحتية.
نظرة عامة على الدور الوظيفي: مهندس ميكانيكي ميداني أول PFE RIC
تطلب شركة بكتل مهندس ميكانيكي ميداني أول PFE RIC لشغل وظيفة بدوام كامل في الخبر والجبيل بالمنطقة الشرقية. يتضمن هذا الدور تمثيل الهيئة الملكية لضمان تلبية معايير السلامة والجودة للمشروع. يقوم المهندس الميكانيكي الميداني الأول بمراجعة وثائق المقاولين، ويعمل كحلقة وصل بين هندسة الهيئة الملكية والمقاولين لحل المشكلات التقنية، ويساعد في توثيق الأنشطة الميدانية وإجراء عمليات التفتيش. تتطلب الوظيفة خبرة ذات صلة تتراوح بين 5 إلى 10 سنوات.
المسؤوليات الرئيسية
- تفسير وثائق العقد ومخططات الإنشاء الخاصة بتطوير الموقع.
- مراجعة وثائق المقاولين، وبيانات طريقة العمل، وخطط السلامة، وخطط الجودة، وخطط التحكم المروري لضمان الامتثال.
- إجراء عمليات تفتيش يومية للسلامة والجودة للأعمال المادية وفرض الامتثال.
- مراجعة واعتماد فواتير الدفع الشهرية للمقاولين ومراقبة جداول المشروع.
- مراقبة مراقبة الجودة وإنشاء الأنشطة الميكانيكية، بما في ذلك أنظمة التكييف (HVAC)، والمضخات، والمرافق تحت الأرض.
- تقديم التوجيه والتوصيات بشأن فشل المواد، ومشاكل تنفيذ الموقع، وتحسينات المنتجات.
- مساعدة المقاولين في تحديد العيوب، ورفع تقارير عدم المطابقة، وتنفيذ إجراءات تصحيحية.
- دعم أدوات الجودة (ITP، وQAN/NCR، ودروس مستفادة، وREAL Card، وPBS & PBQ).
- إجراء تدقيق الجودة والصحة والسلامة والبيئة SMQE PFE-QE وإعداد التقارير ذات الصلة.
- مراجعة واعتماد الوثائق الفنية، ومخططات الورش، والمخططات التنفيذية (as-built)، وحزم التصميم.
- إجراء ورش عمل تدريبية لمختلف التخصصات وتدريب عملي للتخصص الميكانيكي.
المؤهلات والخبرة
- خبرة لا تقل عن 5 إلى 8 سنوات كمهندس ميكانيكي ميداني/موقع في مجال إنشاءات البنية التحتية.
- فهم الإنشاء والاختبار والتشغيل والجودة للأعمال الكهروميكانيكية، بما في ذلك الأنابيب الميكانيكية، وأعمال خطوط الأنابيب، ومحطات الضخ، والصمامات، وتركيبات التكييف (HVAC).
- إجادة استخدام تكنولوجيا المعلومات لإعداد التقارير والتوثيق.
- خبرة في الإشراف على إنشاء واختبار وتشغيل المرافق والمعدات الميكانيكية في مشاريع البنية التحتية.
- خبرة في إنشاء واختبار وتشغيل خطوط أنابيب FRP ذات القطر الكبير.
- معرفة إجراءات السلامة والجودة القياسية للإشراف على الموقع، بما في ذلك خطط التفتيش والاختبار وبيانات طريقة العمل.
- فهم مخططات التصميم، وحزم تصميم الموردين، والمواصفات، والقدرة على مراجعة واعتماد مخططات الورش والوثائق الفنية.
- الإلمام بالاستفسارات الفنية (TQs)، وطلبات المعلومات (RFIs)، ووثائق تغيير الموقع (FCDs)، وتقارير عدم المطابقة/الامتثال (NCRs).
- خبرة في قيادة أنشطة الإنشاء والاختبار والتشغيل متعددة التخصصات.
- القدرة على مراجعة واعتماد حزم التصميم الميكانيكي للموردين، بما في ذلك الحسابات.
- معرفة عملية بنطاقات التخصصات الأخرى، والواجهات، والأدوار، والمسؤوليات.
- خبرة في تقييم ومراجعة واعتماد المواد المقترحة، ووثائق الموقع، ودفعات الإنجاز الشهرية.
- الالتزام بالحفاظ على نهج قوي للصحة والسلامة بما يتماشى مع فلسفة بكتل في عدم وقوع حوادث.
- نهج موجه نحو الجودة، والعمل الاستباقي مع المقاولين للقضاء على العيوب والحفاظ على بيئة خالية من إعادة العمل.
- فهم الأكواد والمعايير الدولية المتعلقة بالأعمال الكهروميكانيكية والمضخات وأنظمة الأنابيب.
المهارات المطلوبة
- مهارات تواصل شفهية وكتابية جيدة باللغة الإنجليزية.
- القدرة على شرح القضايا المتعلقة بالبناء للمشرفين والمقاولين.
- القدرة على العمل بفعالية داخل مؤسسة متنوعة ثقافياً.
- المعرفة والفهم للتنسيق بين التخصصات.
- مهارات عمل جماعي قوية والقدرة على تحديد ومعالجة قضايا المشروع بشكل استباقي.
- فرد متحمس ذاتياً وقادر على العمل مع الحد الأدنى من الإشراف.
About Bechtel Corporation and the Jubail Project
Bechtel Corporation has a history spanning over 125 years, delivering more than 25,000 projects across 160 countries. The company focuses on infrastructure, nuclear, security & environmental, energy, mining & metals, and manufacturing & technology markets, offering services from initial planning to operations. The Jubail project, located in the Eastern Province of Saudi Arabia, is a significant civil engineering undertaking managed by Bechtel since the mid-1970s. Saudi Arabian Bechtel Company (SABCO) acts as the Management Services Contractor for the Royal Commission, overseeing engineering, procurement, and construction activities by local firms and contractors in Jubail and Ras Al-Khair Industrial Cities. The contract was renewed in June 2026 for another five years, focusing on new residential communities, iconic structures, site preparation, commercial buildings, and extensive utility and infrastructure development.
Role Overview: Sr. Field Mechanical Engineer PFE RIC
Bechtel Corporation is seeking a Sr. Field Mechanical Engineer PFE RIC for a full-time position in Al Khobar and Al Jubail, Eastern Province. This role involves representing the Royal Commission to ensure project safety and quality standards are met. The Senior Field Mechanical Engineer reviews contractor submittals, acts as an interface between RC Engineering and contractors for technical issue resolution, and assists in documenting field activities and conducting inspections. The position requires 5-10 years of relevant experience.
Key Responsibilities
- Interpret contract documents and construction plans for site development.
- Review contractor submittals, work method statements, safety plans, quality plans, and traffic control plans for compliance.
- Conduct daily safety and quality inspections of physical works and enforce compliance.
- Review and approve contractor's monthly pay invoices and monitor project schedules.
- Monitor quality control and construction of mechanical activities, including HVAC, pumps, and underground utilities.
- Provide guidance and recommendations for material failures, site execution problems, and product enhancements.
- Assist contractors in identifying defects, raising non-conformance reports, and implementing corrective procedures.
- Support quality tools (ITP, , QAN/NCR, Lesson Learned, REAL Card, PBS & PBQ).
- Conduct SMQE PFE-QE Quality & ESH audits and prepare relevant reports.
- Review and approve technical submittals, shop drawings, as-built drawings, and design packages.
- Conduct training workshops for various disciplines and hands-on training for mechanical discipline.
Qualifications and Experience
- A minimum of 5 to 8 years of relevant experience as a mechanical field/site engineer in infrastructure construction.
- Understanding of construction, testing, commissioning, and quality for electromechanical works, including mechanical piping, pipeline works, pump stations, valves, and HVAC installations.
- Proficiency in IT for report preparation and documentation.
- Experience in supervision of construction, testing, and commissioning of utilities and mechanical equipment on infrastructure projects.
- Experience in construction, testing, and commissioning large bore FRP pipelines.
- Knowledge of standard site supervision safety and quality procedures, including inspection & test plans and Work Method Statements.
- Understanding of design drawings, vendor design packages, specifications, and the ability to review and approve shop drawings and technical submittals.
- Familiarity with Technical Queries (TQs), Requests for Information (RFIs), Field Change Documents (FCDs), and Non Conformance/Compliance Reports (NCRs).
- Experience in leading multidisciplinary construction, testing, and commissioning activities.
- Ability to review and approve vendor mechanical design packages, including calculations.
- Working knowledge of other discipline scopes, interfaces, roles, and responsibilities.
- Experience in evaluating, reviewing, and approving proposed materials, field documents, and monthly progress payments.
- Commitment to maintaining a strong health and safety approach in line with Bechtel's zero accidents philosophy.
- Quality-oriented approach, proactively working with contractors to eliminate defects and maintain a zero rework environment.
- Understanding of international codes and standards pertaining to electromechanical works, pumps, and piping systems.
Required Skills
- Good oral and written communication skills in English.
- Ability to explain construction-related issues to supervisors and contractors.
- Ability to work effectively within a culturally diverse organization.
- Knowledge and understanding of inter-discipline coordination.
- Strong teamwork skills and the ability to proactively identify and address project issues.
- Self-motivated individual capable of working with minimal supervision.