About the Role
Kent is seeking a Senior Site/Construction Piping Engineer to join their team in the Eastern Province of Saudi Arabia. This is a full-time position, requiring 48 hours per week, focused on the end-to-end execution of piping and structural construction scope at various sites within Dammam, Al Khobar, Dhahran, Al Jubail, Al-Ahsa, Ras Tannurah, Al Khafji, and Buqayq. The role involves overseeing all aspects from engineering drawing review to the physical fabrication, erection, and tie-in of piping systems, ensuring compliance with project standards and safety regulations.
Key Responsibilities
- Provide technical oversight for piping/structural work areas and supervise the preparation of Construction/Installation Work Packages (CWPs/IWPs) and site deliverables.
- Review IFC drawings, P&IDs, isometrics, piping GA drawings, pipe support drawings, and structural drawings.
- Mark up redline drawings based on actual field conditions, approved field changes, and site deviations, and coordinate their formal incorporation into as-built documentation.
- Supervise piping spool fabrication, erection, shop/field welding, and flanged/welded tie-ins according to approved specifications.
- Oversee the installation of pipe supports, pipe racks, and associated structural steel (platforms, handrails, gratings, ladders) that support the piping scope.
- Coordinate pipe routing and support locations with structural design and existing infrastructure to resolve potential issues before fabrication/erection.
- Follow up on hydro testing and reinstatement packages for piping systems.
- Identify and resolve discrepancies from approved designs, raising Technical Queries (TQs) as needed.
- Ensure compliance with applicable project Piping Design Procedures, Saudi Aramco Engineering Standards (SAES/SAEP), and international standards such as ASME, API, and AISC.
- Coordinate with QA/QC for inspection requests, hold points, and non-conformance report (NCR) close-outs.
- Support Mechanical Completion and pre-commissioning handover activities.
Qualifications and Experience
- A minimum of 5 to 10 years of experience in site or construction piping engineering.
- Demonstrated experience in reviewing engineering drawings and preparing construction work packages.
- Proficiency in supervising fabrication, erection, and tie-in of piping systems.
- Familiarity with Saudi Aramco Engineering Standards and Procedures (SAES/SAEP) and international standards like ASME, API, and AISC.
Quality and Safety Compliance
The successful candidate will be responsible for ensuring that all piping and structural activities are executed safely, to the required quality, and in line with the project schedule, approved drawings, and specifications. This includes strict adherence to Kent’s ISO accredited QMS and project-specific procedures. The employee shall observe all Health, Safety, Sustainability, Environment, and Quality rules of Kent, its clients, and the governing authorities of Saudi Arabia.
Professional Development
In consultation with the Construction Manager, the engineer will take responsibility for identifying personal development needs and ensuring agreed development goals are met. The role also involves performing related duties as instructed.
Work Location
This full-time position is based in the Eastern Province of Saudi Arabia, with potential assignments across Dammam, Al Khobar, Dhahran, Al Jubail, Al-Ahsa, Ras Tannurah, Al Khafji, and Buqayq.
عن الدور الوظيفي
تطلب شركة Kent تعيين مهندس أول موقع/إنشاءات أنابيب للانضمام إلى فريقها في المنطقة الشرقية بالمملكة العربية السعودية. هذه وظيفة بدوام كامل، تتطلب 48 ساعة في الأسبوع، وتركز على التنفيذ الشامل لنطاق أعمال إنشاءات الأنابيب والهياكل في مواقع مختلفة داخل الدمام، الخبر، الظهران، الجبيل، الأحساء، رأس تنورة، الخفجي، وبقيق. يتضمن الدور الإشراف على جميع الجوانب بدءاً من مراجعة الرسومات الهندسية وصولاً إلى التصنيع الفعلي، والتركيب، وربط أنظمة الأنابيب، مع ضمان الامتثال لمعايير المشروع ولوائح السلامة.
المسؤوليات الرئيسية
- توفير الإشراف الفني لمناطق أعمال الأنابيب/الهياكل والإشراف على إعداد حزم أعمال الإنشاء/التركيب (CWPs/IWPs) وتسليمات الموقع.
- مراجعة رسومات البناء الصادرة (IFC)، ومخططات الأنابيب والأجهزة (P&IDs)، والرسومات متساوية القياس (Isometrics)، ورسومات الترتيب العام للأنابيب (GA)، ورسومات دعامات الأنابيب، والرسومات الهيكلية.
- إجراء التعديلات على الرسومات (Redline drawings) بناءً على ظروف الموقع الفعلية، والتغييرات الميدانية المعتمدة، وانحرافات الموقع، وتنسيق دمجها رسمياً في وثائق ما بعد التنفيذ (as-built).
- الإشراف على تصنيع بكرات الأنابيب، والتركيب، واللحام في الورشة/الموقع، والربط بالفلنجات/اللحام وفقاً للمواصفات المعتمدة.
- الإشراف على تركيب دعامات الأنابيب، وحوامل الأنابيب، والفولاذ الهيكلي المرتبط بها (المنصات، الدرابزين، المشابك المعدنية، السلالم) التي تدعم نطاق أعمال الأنابيب.
- تنسيق مسارات الأنابيب ومواقع الدعامات مع التصميم الهيكلي والبنية التحتية الحالية لحل المشكلات المحتملة قبل التصنيع/التركيب.
- متابعة حزم الاختبار الهيدروليكي وإعادة التجهيز لأنظمة الأنابيب.
- تحديد وحل التناقضات في التصاميم المعتمدة، ورفع الاستفسارات الفنية (TQs) حسب الحاجة.
- ضمان الامتثال لإجراءات تصميم الأنابيب المعمول بها في المشروع، ومعايير أرامكو السعودية الهندسية (SAES/SAEP)، والمعايير الدولية مثل ASME وAPI وAISC.
- التنسيق مع قسم ضمان الجودة/ضبط الجودة (QA/QC) لطلبات التفتيش، ونقاط التوقف، وإغلاق تقارير عدم المطابقة (NCR).
- دعم أنشطة الإنجاز الميكانيكي وتسليم ما قبل التشغيل.
المؤهلات والخبرة
- خبرة لا تقل عن 5 إلى 10 سنوات في هندسة الأنابيب في المواقع أو الإنشاءات.
- خبرة مثبتة في مراجعة الرسومات الهندسية وإعداد حزم أعمال الإنشاء.
- الكفاءة في الإشراف على تصنيع وتركيب وربط أنظمة الأنابيب.
- الإلمام بمعايير وإجراءات أرامكو السعودية الهندسية (SAES/SAEP) والمعايير الدولية مثل ASME وAPI وAISC.
الامتثال للجودة والسلامة
سيكون المرشح الناجح مسؤولاً عن ضمان تنفيذ جميع أنشطة الأنابيب والهياكل بأمان، وفقاً للجودة المطلوبة، وبما يتماشى مع جدول المشروع والرسومات والمواصفات المعتمدة. يشمل ذلك الالتزام الصارم بنظام إدارة الجودة المعتمد من ISO الخاص بـ Kent وإجراءات المشروع المحددة. يجب على الموظف مراعاة جميع قواعد الصحة والسلامة والاستدامة والبيئة والجودة الخاصة بـ Kent وعملائها والسلطات الحاكمة في المملكة العربية السعودية.
التطوير المهني
بالتشاور مع مدير الإنشاءات، سيتولى المهندس مسؤولية تحديد احتياجات التطوير الشخصي وضمان تحقيق أهداف التطوير المتفق عليها. يتضمن الدور أيضاً أداء المهام ذات الصلة حسب التوجيهات.
موقع العمل
يقع هذا المنصب بدوام كامل في المنطقة الشرقية بالمملكة العربية السعودية، مع إمكانية التكليف بمهام في الدمام، الخبر، الظهران، الجبيل، الأحساء، رأس تنورة، الخفجي، وبقيق.