حول الدور
تبحث شركة GE Vernova عن مهندس اختبار وتشغيل للانضمام إلى فريقها في الرياض، المملكة العربية السعودية. يتضمن هذا الدور بدوام كامل إدارة وتنفيذ أنشطة الاختبار والتشغيل لأنظمة الحماية والتحكم في المحطات الكهربائية الفرعية، مع ضمان التوافق مع أهداف المشروع فيما يتعلق بالسلامة والجودة والتكلفة والتسليم، بالإضافة إلى المواصفات الفنية التعاقدية. يتطلب هذا المنصب من 7 إلى 10 سنوات من الخبرة ذات الصلة.
المسؤوليات الرئيسية
- تنظيم وإدارة جميع اختبارات المحطات الفرعية، بما في ذلك إعداد خطط الاختبار والإجراءات المرتبطة بها.
- تنفيذ جميع أنواع الاختبارات الموقعية لأنظمة الحماية والتحكم.
- إنشاء وتحديث جداول الاختبار وفقاً للجدول الزمني العام للمشروع.
- إدارة معدات الاختبار الموقعية، مثل أجهزة القياس الرقمية المتعددة، وأجهزة الحقن، وأجهزة قياس الواط، مع ضمان صلاحية شهادات المعايرة.
- التحقق من أن جميع الاختبارات الموقعية تتوافق مع متطلبات العقد فيما يتعلق بالجودة والنوع.
- إصدار وإدارة تقارير عدم المطابقة عند الحاجة.
- ضمان تعليم جميع المخططات لإعداد وثائق ما تم تنفيذه (as-built).
- مركزة وأرشفة تقارير الاختبار، والتأكد من اعتمادها وتوقيعها حسب الأصول من قبل الاستشاري أو العميل.
- تنظيم وإدارة النسخ الاحتياطية لجميع ملفات حاسوب المعدات، بما في ذلك إعدادات مرحلات الحماية وتكوينات المعدات، لتسليمها مع المخططات المعلمة.
- ضمان الامتثال لسياسات الجودة والصحة والبيئة (EHS) لشبكة (GRID) وسياسات (PMH) وإجراءات نظام الإدارة المتكامل (IMS).
- تسجيل وتقديم بيانات أهداف الجودة ومؤشرات الأداء الرئيسية (KPI).
- تنسيق الأنشطة اليومية مع العميل.
- التوصية بالتغييرات الميدانية المفيدة لعمليات المحطة أو الضرورية للتشغيل الفعال.
- إعداد تقارير التشغيل النهائية التي تسلط الضوء على مجالات المشاكل، والتغييرات الهندسية الموصى بها، والتحسينات في الكفاءة التنظيمية، وتقييمات أداء الموظفين.
- إعداد تقارير مرحلية شهرية عن أنشطة مجموعة التشغيل، مع تدوين أي أحداث سلبية مثل التأخيرات، أو أخطاء التصميم/التركيب، أو نقص قطع الغيار.
- التحقق من الالتزام بإجراءات السلامة، بما في ذلك التصاريح، وبيانات الطرق، وتقييمات المخاطر، ونظام القفل والوسم (LOTO)، لجميع الأنشطة عالية المخاطر أثناء تسلسل العمليات واستخدام المعدات.
المؤهلات المطلوبة
- درجة البكالوريوس في الهندسة الكهربائية أو مجال ذي صلة.
- خبرة عمل لا تقل عن 7 سنوات كمهندس اختبار وتشغيل في صناعة مماثلة.
- الإلمام بأنظمة الحماية والتحكم وحماية المحطات الفرعية، بما في ذلك جميع لوحات الحماية لمستويات جهد مختلفة (400/132/33/11 كيلو فولت) مثل حماية قضبان التوصيل (BusBar)، وحماية الخطوط، وحماية قواطع التوصيل (BC)، ومخططات حماية المحولات، والاستقرار، وفصل الأحمال، وحماية المكثفات.
- معرفة قوية بجميع لوحات التحكم لمستويات جهد مختلفة، بما في ذلك AVR وABTS وACCS وAMR.
- معرفة قوية بتصميم واختبار وتشغيل أنظمة التحكم والاتش إم آي (SAS).
- معرفة جيدة بإعداد ملفات الواجهة (CID) مع أنظمة (SAS).
- القدرة على التأثير على أصحاب المصلحة الداخليين والوظائف بشكل عرضي وصاعد لتحقيق أهداف المشروع المشتركة.
- القدرة على توصيل قضايا المشروع الرئيسية بإيجاز إلى الإدارة العليا باستخدام الوسائل البصرية المناسبة.
الخصائص المرغوبة
- القدرة على إدارة علاقات العملاء والشركاء والعلاقات الخارجية بفعالية تحت الضغط مع الحفاظ على التركيز على أهداف العمل والمشروع.
- قدرة مثبتة على تعزيز ديناميكيات الفريق الحقيقية والملكية المشتركة لأهداف المشروع.
- القدرة على قيادة المشاريع واتخاذ قرارات تعاونية.
- إحساس قوي بالإلحاح والسعي لتحقيق النتائج.
- نهج استباقي للعمل كعامل تغيير والمساهمة في تحسين العمليات التجارية الأوسع ومبادرات التطور.
About the Role
GE Vernova is seeking a Testing and Commissioning Engineer to join their team in Riyadh, Saudi Arabia. This full-time role involves managing and executing testing and commissioning activities for electrical substation protection and control systems, ensuring alignment with project targets for safety, quality, cost, and delivery, as well as contractual technical specifications. The position requires 7-10 years of relevant experience.
Key Responsibilities
- Organize and manage all substation tests, including preparing test plans and associated procedures.
- Execute all types of site tests for protection and control systems.
- Establish and update testing schedules in accordance with the overall project schedule.
- Manage site test equipment, such as digital multi-meters, injection sets, and watt-meters, ensuring valid calibration certificates.
- Verify that all site tests comply with contract requirements regarding quality and type.
- Issue and manage non-conformance reports as needed.
- Ensure all drawings are marked up for the preparation of as-built documentation.
- Centralize and file test reports, ensuring they are duly approved and signed by the Consultant or Client.
- Organize and manage backups of all equipment computer files, including protection relay settings and equipment configurations, for delivery with marked-up drawings.
- Ensure compliance with PMH, GRID Quality & EHS Policies, and IMS procedures.
- Record and report Quality Objectives & KPI data.
- Coordinate daily activities with the Client.
- Recommend field changes beneficial to plant operations or necessary for efficient commissioning.
- Prepare final Commissioning reports highlighting problem areas, recommended engineering changes, improvements in organizational efficiency, and personnel performance evaluations.
- Prepare monthly progress reports on Commissioning group activities, noting any negative events such as delays, design/erection errors, or missing spares.
- Verify adherence to safety procedures, including Permits, Method Statements, Risk Assessments, and LOTO, for all high-risk activities during operation sequences and equipment use.
Required Qualifications
- Bachelor's Degree in Electrical Engineering or a relevant field.
- Minimum of 7 years of working experience as a Testing and Commissioning Engineer in a similar industry.
- Familiarity with Protection & Control and Sub-Station protection, including all protection panels for various voltage levels (400/132/33/11kV) such as BusBar protection, line protection, BS protection, BC protection, transformer protection schemes, stability, load shedding, and capacitor protection.
- Strong knowledge of all Control panels for different voltage levels, including AVR, ABTS, ACCS, and AMR.
- Strong knowledge of SAS design, testing, and commissioning.
- Good knowledge of preparing interface (CID) files with SAS systems.
- Ability to influence internal stakeholders and functions laterally and upwards to achieve common project goals.
- Ability to communicate key project issues succinctly to senior leadership using appropriate visual aids.
Desired Characteristics
- Ability to manage customer, partner, and external relations effectively under pressure while maintaining focus on business and project goals.
- Demonstrated ability to foster genuine team dynamics and shared ownership of project goals.
- Capability to lead projects and make collaborative decisions.
- Strong sense of urgency and drive for results.
- Proactive approach to acting as a change agent and contributing to wider business operational improvement and evolution initiatives.