حول الدور الوظيفي
تسعى أكوا إلى توظيف مشغل غرفة التحكم للانضمام إلى فريقها في المملكة العربية السعودية. يتضمن هذا الدور الوظيفي بدوام كامل مراقبة معايير تشغيل المحطة والتحكم فيها والتنسيق مع المشغلين الآخرين بشأن جميع الأنشطة ذات الصلة التي تؤثر على العمليات. يجب أن يمتلك المرشح المثالي خبرة ذات صلة تتراوح بين 5 إلى 10 سنوات.
المسؤوليات الرئيسية
- الالتزام بجميع قواعد وأنظمة السلامة.
- المعرفة التامة بمعدات الحريق داخل المنطقة المحددة.
- فهم مخططات الأنابيب والأجهزة (P&IDs)، وإجراءات التشغيل القياسية (SOPs)، وتعليمات العمل، ومنطق التشغيل والتحكم، وإجراءات التشغيل في حالات الطوارئ، وغيرها من الوثائق ذات الصلة بالمحطة.
- مراقبة جميع معايير الوحدة وتسجيل القراءات الدورية في سجلات القراءات.
- تلخيص جميع الأنشطة والأحداث التي وقعت خلال المناوبة في دفتر السجل.
- اتباع تعليمات مهندس مناوبة التشغيل ومشرف المناوبة، والتنسيق مع المشغلين الآخرين في جميع الأنشطة.
- البقاء على أهبة الاستعداد واتخاذ إجراءات سريعة خلال ظروف التشغيل غير الطبيعية.
- التنسيق وضمان اتباع إجراءات العزل والتعليم (Lock Out & Tag Out) أثناء عزل المعدات للصيانة، وفقاً لإجراءات تصريح العمل المعتمدة.
- إعادة المعدات إلى وضعها الطبيعي بعد إلغاء التصريح عند التوجيه بذلك.
- فحص الوحدة والمعدات المساعدة خلال المناوبة لضمان أن جميع معايير المعدات ضمن الحدود المسموح بها.
- الإبلاغ عن أي حالات غير طبيعية لمشرف المناوبة / مهندس مناوبة التشغيل.
- إجراء اختبارات الحماية الدورية تحت إشراف مهندس مناوبة التشغيل / المشرف والاحتفاظ بسجلات دقيقة.
- تنفيذ عمليات التبديل بين المعدات وفقاً للجداول الزمنية المحددة مسبقاً.
- تقديم طلبات العمل أو إشعارات الأعطال للمعدات المعطلة ومتابعة إصلاح الأعطال.
- المساعدة في تدريب وتأهيل المشغلين الجدد.
- الإبلاغ عن الحوادث الوشيكة وتطبيق ضوابط المخاطر المحددة.
- الإبلاغ عن أي انحرافات في نظام إدارة الجودة والصحة والسلامة والبيئة.
- ضمان اتباع الإجراءات السليمة للتخلص من النفايات.
- أداء المهام الأخرى الموكلة حسب المتطلبات.
المؤهلات والخبرة
- خبرة لا تقل عن 5 إلى 10 سنوات في دور مشابه في غرفة التحكم أو تشغيل المحطات.
- قدرة مثبتة على مراقبة المعايير التشغيلية المعقدة والتحكم فيها.
- إتقان فهم وتطبيق مخططات الأنابيب والأجهزة (P&IDs)، وإجراءات التشغيل القياسية (SOPs)، وإجراءات الطوارئ الخاصة بالمحطة.
المهارات المطلوبة
- مهارات ملاحظة قوية واهتمام دقيق بالتفاصيل لمراقبة المعايير.
- القدرة على اتخاذ إجراءات سريعة وفعالة خلال ظروف التشغيل غير الطبيعية.
- مهارات تنسيق وتواصل ممتازة للتفاعل مع المشغلين الآخرين والمشرفين.
- الالتزام ببروتوكولات السلامة واللوائح البيئية.
بيئة العمل
هذه وظيفة بدوام كامل مقرها في المملكة العربية السعودية، وتتطلب المشاركة الفعالة في عمليات المحطة والالتزام بجداول المناوبات. يتضمن الدور العمل عن كثب مع فريق من المشغلين والمهندسين لضمان أداء المحطة بكفاءة وأمان.
إجراءات التقديم
يُشجع المرشحون الذين يستوفون المؤهلات المذكورة أعلاه على التقديم. سيتم مناقشة تفاصيل الراتب أثناء مرحلة المقابلة.
About the Role
Acwa is seeking a Control Room Operator to join their team in Saudi Arabia. This full-time role involves monitoring and controlling plant operation parameters and coordinating with other operators on all related activities that impact operations. The ideal candidate will have 5-10 years of relevant experience.
Key Responsibilities
- Comply with all safety rules and regulations.
- Maintain familiarity with fire equipment within the designated area.
- Understand plant P&IDs, SOPs, work instructions, operation and control logics, emergency operation procedures, and other relevant documentation.
- Monitor all unit parameters and record periodic readings on log sheets.
- Summarize all activities and events that occurred during the shift in the log book.
- Follow instructions from the Shift Charge Engineer and Shift Supervisor, coordinating with other operators on all activities.
- Remain alert and take prompt action during abnormal operating conditions.
- Coordinate and ensure Lock Out & Tag Out procedures are followed during equipment isolation for maintenance, as per the approved Permit To Work procedure.
- Normalize equipment after cancellation when instructed.
- Inspect the unit and auxiliaries during the shift to ensure all equipment parameters are within limits.
- Report abnormalities to the Shift Supervisor / SCE.
- Perform periodic protection tests under the supervision of SCE/Supervisor and maintain accurate records.
- Execute equipment changeovers according to preset schedules.
- Raise work requests or defect notes for faulty equipment and follow up on defect rectification.
- Assist in the training and familiarization of new operators.
- Report near misses and implement prescribed risk controls.
- Report deviations in the Quality, Health, Safety, and Environmental Management System.
- Ensure proper waste disposal measures are followed.
- Perform other assigned duties as required.
Qualifications and Experience
- A minimum of 5-10 years of experience in a similar control room or plant operations role.
- Demonstrated ability to monitor and control complex operational parameters.
- Proficiency in understanding and applying plant P&IDs, SOPs, and emergency procedures.
Required Skills
- Strong observational skills and attention to detail for parameter monitoring.
- Ability to take quick and effective actions during abnormal operating conditions.
- Excellent coordination and communication skills for interacting with other operators and supervisors.
- Commitment to safety protocols and environmental regulations.
Work Environment
This is a full-time position based in Saudi Arabia, requiring active participation in plant operations and adherence to shift schedules. The role involves working closely with a team of operators and engineers to ensure efficient and safe plant functionality.
Application Process
Candidates who meet the above qualifications are encouraged to apply. Salary details will be discussed during the interview process.