في عالم من الاحتمالات، تعقب واحدًا يفتح أبواب الفرص بلا نهاية. تخيل المستقبل! في Parsons، يمكنك تخيل مسار وظيفي thrives، وتعمل مع أشخاص استثنائيين، وتكون نفسك. مسترشدين برؤية قيادتنا التي تقيّم الناس، وتتبنى المرونة، وتُعزّز النمو، نزرع ثقافة مبتكرة تمكنك من تحقيق كامل إمكاناتك. أطلق العنان لمواهبك وأعد تعريف ما هو ممكن.
تبحث Parsons عن أخصائي جودة مشروع رائع الموهبة - MEА للانضمام إلى فريقنا!
ما ستقوم به
- توفير إشراف جودة متخصص لجميع أنشطة مشروع MEP.
- تنفيذ ومراقبة متطلبات جودة MEP وفقًا لخطة جودة المشروع والإجراءات المعتمدة.
- مراجعة رسومات MEP والمواصفات وبيانات الطريقة وITPs وقوائم فحص ومتطلبات التفتيش.
- مراقبة أنشطة تركيب MEP للامتثال للتصميم المعتمد والمتطلبات المشروع.
- إجراء تفتيشات الجودة، وأنشطة الرقابة، وتدقيقات أعمال MEP.
- مراجعة طلبات فحص المواد (MIRs)، وطلبات فحص الأعمال (WIRs)، وتقارير الاختبار، وشهادات المواد، والوثائق الفنية.
- التحقق من استخدام المواد والمعدات المعتمدة وتخزينها بشكل صحيح وحمايتها وتثبيتها.
- مراقبة أداء QA/QC للمقاول والمقاول من الباطن.
- تحديد مخاطر جودة MEP والعيوب وعدم الامتثال والقضايا المتكررة.
- مراجعة ومراقبة NCRs و الملاحظات والإجراءات التصحيحية المتعلقة بـ MEP.
- دعم تحليل السبب الجذري لقضايا جودة MEP الكبرى أو المتكررة.
- التحقق من الإجراءات التصحيحية والوقائية قبل الإغلاق.
- التنسيق مع فرق الهندسة والتشييد لحل قضايا الجودة الفنية.
- المشاركة في اجتماعات التنسيق الفني، وورش جودة، والتفتيش والتدقيق.
- مراقبة اختبارات MEP وأنشطة التشغيل والتهيئة.
- التأكد من اكتمال وتوافق سجلات الاختبار والتشغيل.
- دعم فحص النهاية، وإغلاق أخطاء، وتوثيق التسليم.
- الحفاظ على سجلات ومراسلات جودة MEP دقيقة.
- إعداد تقارير الجودة الأسبوعية والشهرية ولوحات الأداء.
- تعزيز الوعي بالجودة والتحسين المستمر عبر فرق MEP.
مسؤوليات جودة ميكانيكية
- مراقبة جودة تركيب أنظمة HVAC بما في ذلك: المبردات، وحدات معالجة الهواء، مراكز التهوية، مضخات CHW، أنظمة ماء التبريد، أنابيب ميكانيكية، أنظمة التهوية، أنابيب ميكانيكية، مبادلات حرارية، أنظمة ضغط، أنظمة تحكم الدخان
- فحص تركيب المعدات الميكانيكية والمحاذاة والدعامات، وعزل الاهتزاز، والوصلات.
- مراقبة تركيب أنابيب الماء البارد، واختبار الضغط، والتدفق، والتنظيف، والعزل.
- التحقق من تركيب مجاري الهواء، واختبار التسرب، والعزل، والإغلاق، وتركيب ومخمدات الحريق/الدخان.
- مراقبة اختبار معدات HVAC والتوازن والتشغيل.
- مراجعة تقارير TAB والتحقق من الامتثال لمتطلبات المشروع.
- مراقبة تركيب غرفة الماكينات والتوصيلات للمعدات.
- دعم التحقق من جودة الأنظمة الميكانيكية أثناء الاختبار والتهيئة المتكاملة.
مسؤوليات جودة الكهرباء
- مراقبة تركيب أنظمة الكهرباء بما في ذلك: أنظمة MV/LV، المحولات، المفاتيح، لوحات التوزيع، المولدات، أنظمة UPS، أنظمة ATS، أنظمة الكابلات، الاحتواء، الإضاءة، التأريض والتوصيل، حماية البرق
- التحقق من تركيب الكابلات، نهاياتها، التعريف، التوجيه، والاختبار.
- مراقبة تركيب الاحتواء الكهربائي، المسارات، السلالم، الممرات، والدعامات.
- مراجعة سجلات الاختبار والتشغيل الكهربائي.
- مراقبة مقاومة العزل، الاستمرارية، مقاومة الأرض، اختبار الكابلات، والاختبارات الوظيفية.
- التحقق من تركيب الأجهزة الكهربائية ومتطلبات الشركات المصنعة.
- تنسيق متطلبات جودة الكهرباء مع المدنيين والهيكلية وتكنولوجيا المعلومات والأمن والتخصصات الأخرى.
جودة أنابيب السباكة والحماية من الحرائق
- مراقبة تركيب: أنظمة المياه المنزلية، وأنظمة المياه الساخنة، والصرف، وأنظمة التربة والمخلفات، وأنظمة مياه الأمطار، وتركيبات السباكة، وأنظمة مكافحة الحريق، وأنظمة الرش، وخزانات الحريق، ومضخات الحريق، وصمامات الحريق
- التحقق من تركيب أنابيب، الانحدارات، الدعامات، الوصلات، الصمامات، والاتصالات.
- مراقبة الاختبار بالضغط، واختبار التسرب، والتدفق والتعقيم عند الاقتضاء.
- مراجعة سجلات اختبار وتشغيل أنظمة الحماية من الحريق.
- التحقق من تركيب أنظمة الرش والوقاية من الحرائق وفق الرسومات والمواصفات المعتمدة.
- مراقبة التنسيق بين أعمال السباكة، والحماية من الحرائق، و HVAC، والكهرباء، والعمارة.
تفتيش و اختبار MEP
- مراجعة ومراقبة ITPs و إجراءات التفتيش لـ MEP.
- ضمان إدارة نقاط الاحتجاز ونقاط الشهادة بشكل صحيح.
- تنسيق عمليات التفتيش مع المقاولين والمستشارين وممثلي العميل.
- مراجعة شهادات المعدات والمواد.
- مراقبة اختبارات القبول المصنع عند الحاجة.
- مراجعة اختبارات الضغط، والاختبارات الهيدرواستاتيكية، والتدفق، والتنظيف، والعزل، والاختبارات الوظيفية.
- مراقبة الاختبار الكهربائي والتشغيل.
- مراجعة اختبارات HVAC والتعديلات والتوازن.
- مراقبة اختبار النظام المتكامل وتوجيه التشغيل.
- التأكد من أن الاختبارات الفاشلة يتم التحقيق فيها وتطبيق الإجراءات التصحيحية.
- الحفاظ على سجلات التفتيش والاختبار كاملة.
مسؤوليات الهندسة والتنسيق
- مراجعة وثائق تصميم MEP من حيث الجودة وقابلية البناء.
- التنسيق مع مهندسي MEP ومستشاري التصميم حول قضايا فنية تتعلق بالجودة.
- التأكد من عمل فرق البناء من أحدث الرسومات المعتمدة وتعديلاتها.
- مراقبة تغييرات التصميم والتحقق من دمج التغييرات المعتمدة في البناء.
- التنسيق بين واجهات MEP مع المدنيين، والهياكل، والعمارة، والمرافق، وتكنولوجيا المعلومات والاتصالات، والأمن، وأنظمة المتخصصة.
- دعم حل RFIs والأسئلة الفنية وتوضيحات التصميم.
- دعم تنسيق BIM ومراجعات الجودة القائمة على النموذج حيثما كان ذلك ممكنًا.
- تحديد التعارضات المحتملة ومشاكل القابلية للبناء تؤثر على جودة MEP.
مسؤوليات المطار/ البنية التحتية ومرافق المدرج
- توفير إشراف جودة MEP عبر صالات المطار ومباني الدعم ومرافق البنية التحتية ومرافق المدرج والمناطق الخارجية.
- مراقبة أنظمة MEP ضمن بيئات المطار البرية والجانب الجوي.
- دعم إدارة الجودة للأنظمة الحيوية للمطار مثل HVAC والكهرباء والسباكة والحماية من الحرائق والميكانيكا.
المرشح المثالي
درجة البكالوريوس في الهندسة الميكانيكية أو الهندسة الكهربائية أو هندسة خدمات المبنى، أو تخصص ذي صلة.
خبرة لا تقل عن 10 سنوات في ضمان جودة/مراقبة الجودة لـ MEP في مشاريع بناء كبرى.
خبرة قوية في الأنظمة الميكانيكية والكهربائية والسباكة والحماية من الحرائق.
خبرة في مشاريع مطار رئيسية أو بنية تحتية أو تجارية أو صناعية أو متعددة التخصصات.
معرفة قوية بتركيب MEP واختباره وتشغيله وتسليمها.
خبرة قوية مع ITPs وبيانات الطريقة و MIRs و WIRs و NCRs وإجراءات الاختبار والوثائق الجودة.
معرفة جيدة بالمعايير الدولية المعمول بها، بما في ذلك ASHRAE و NFPA و IEC و BS والمتطلبات المحلية ذات الصلة.
خبرة في العمل مع العملاء والمستشارين والمقاولين والمقاولين من الباطن.
معرفة قوية بمبادئ إدارة الجودة ISO 9001.
يفضّل أن يكون حاصلاً على شهادة مدقق رئيسي ISO 9001 أو CQI أو ما يعادلها.
شهادة هندسية مهنية ميزة.
مهارات تواصل وتنسيق وتحليل وحل مشكلات قوية.
In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what s possible.
Parsons is looking for an amazingly talented Project Quality Specialist -MEP to join our team!
What You ll Be Doing
- Provide specialist quality oversight for all MEP project activities.
- Implement and monitor MEP quality requirements in accordance with the Project Quality Plan and approved procedures.
- Review MEP drawings, specifications, Method Statements, ITPs, checklists, and inspection requirements.
- Monitor MEP installation activities for compliance with approved design and project requirements.
- Conduct quality inspections, surveillance activities, and audits of MEP works.
- Review Material Inspection Requests (MIRs), Work Inspection Requests (WIRs), test reports, material certificates, and technical documentation.
- Verify that approved materials and equipment are used, properly stored, protected, and installed.
- Monitor Contractor and Subcontractor QA/QC performance.
- Identify MEP quality risks, defects, non-conformances, and recurring issues.
- Review and monitor MEP-related NCRs, observations, and corrective actions.
- Support root cause analysis for major or recurring MEP quality issues.
- Verify corrective and preventive actions prior to closure.
- Coordinate with Engineering and Construction teams to resolve technical quality issues.
- Participate in technical coordination meetings, quality workshops, inspections, and audits.
- Monitor MEP testing and commissioning activities.
- Ensure testing and commissioning records are complete and compliant.
- Support final inspection, snagging, punch-list closure, and handover activities.
- Maintain accurate MEP quality records and documentation.
- Prepare weekly and monthly quality reports and performance dashboards.
- Promote quality awareness and continuous improvement across MEP teams.
Mechanical Quality Responsibilities
- Monitor installation quality of HVAC systems, including: Chillers AHUs FCUs Pumps CHW Systems Condenser Water Systems Ductwork Ventilation Systems Mechanical Pipework Heat Exchangers Pressurization Systems Smoke Control Systems
- Inspect mechanical equipment installation, alignment, supports, vibration isolation, and connections.
- Monitor chilled water pipe installation, pressure testing, flushing, cleaning, and insulation.
- Verify ductwork installation, leakage testing, insulation, sealing, and fire / smoke damper installation.
- Monitor HVAC equipment testing, balancing, and commissioning.
- Review TAB reports and verify compliance with project requirements.
- Monitor mechanical plantroom installation and equipment interfaces.
- Support quality verification of mechanical systems during integrated testing and commissioning.
Electrical Quality Responsibilities
- Monitor installation of electrical systems, including: MV / LV Systems Transformers Switchgear Distribution Boards Generators UPS Systems ATS Systems Cable Systems Containment Lighting Small Power Earthing & Bonding Lightning Protection
- Verify cable installation, termination, identification, routing, and testing.
- Monitor installation of electrical containment, trays, ladders, conduits, and supports.
- Review electrical testing and commissioning records.
- Monitor insulation resistance, continuity, earth resistance, cable testing, and functional testing.
- Verify electrical equipment installation and manufacturer requirements.
- Coordinate electrical quality requirements with Civil, Structural, ICT, Security, and other disciplines.
Plumbing & Fire Protection Quality Responsibilities
- Monitor installation of: Domestic Water Systems Hot Water Systems Drainage Soil & Waste Systems Stormwater Systems Plumbing Fixtures Fire Fighting Systems Sprinkler Systems Fire Hose Reels Fire Pumps Fire Hydrants
- Verify pipework installation, slopes, supports, joints, valves, and connections.
- Monitor pressure testing, leakage testing, flushing, and disinfection where applicable.
- Review fire protection testing and commissioning records.
- Verify sprinkler and fire-fighting system installation against approved drawings and specifications.
- Monitor coordination between plumbing, fire protection, HVAC, electrical, and architectural works.
MEP Inspection & Testing
- Review and monitor MEP ITPs and inspection procedures.
- Ensure Hold Points and Witness Points are properly managed.
- Coordinate inspections with Contractors, Consultants, and Client representatives.
- Review equipment and material certificates.
- Monitor factory acceptance testing where required.
- Review pressure testing, hydrostatic testing, flushing, cleaning, insulation, and functional testing.
- Monitor electrical testing and commissioning.
- Review HVAC testing, adjusting, and balancing results.
- Monitor integrated system testing and commissioning.
- Ensure failed tests are investigated and corrective actions implemented.
- Maintain complete inspection and testing records.
Engineering & Coordination Responsibilities
- Review MEP design documentation for quality and constructability considerations.
- Coordinate with MEP Engineers and Design Consultants on quality-related technical issues.
- Ensure construction teams are working from the latest approved drawings and revisions.
- Monitor design changes and verify that approved changes are incorporated into construction.
- Coordinate MEP interfaces with Civil, Structural, Architectural, Utilities, ICT, Security, and specialist systems.
- Support resolution of RFIs, Technical Queries, and design clarifications.
- Support BIM coordination and model-based quality reviews where applicable.
- Identify potential clashes and constructability issues affecting MEP quality.
Airport / Infrastructure & Airfield Responsibilities
- Provide MEP quality oversight across airport terminals, support buildings, infrastructure facilities, airfield facilities, and external areas.
- Monitor MEP systems within airside and landside environments.
- Support quality management of critical airport HVAC, electrical, plumbing, fire protection, and mechanical systems.
Desired Candidate Profile
Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Building Services Engineering , or a related discipline.
Minimum 10 years of relevant experience in MEP quality assurance / quality control on major construction projects.
Strong experience in mechanical, electrical, plumbing, and fire protection systems.
Experience on major airport, infrastructure, commercial, industrial, or multidisciplinary projects.
Strong knowledge of MEP installation, inspection, testing, commissioning, and handover.
Strong experience with ITPs, Method Statements, MIRs, WIRs, NCRs, testing procedures, and quality documentation.
Good knowledge of applicable international codes and standards, including ASHRAE, NFPA, IEC, BS, and relevant local requirements.
Experience working with Clients, Consultants, Contractors, and Subcontractors.
Strong knowledge of ISO 9001 quality management principles.
ISO 9001 Lead Auditor, CQI, or equivalent quality certification is preferred.
Professional engineering certification is an advantage.
Strong communication, coordination, analytical, and problem-solving skills.