المسؤوليات الرئيسية: تنفيذ أنشطة ضمان الجودة/ضبط الجودة، بما في ذلك المراقبة على أعمال المقاولين من الباطن والموردين الفرعيين، وفقاً لخطط الفحص والاختبار (ITP) المعتمدة والإجراءات وبيانات أسلوب العمل وخطط الجودة ووثائق التحكم الأخرى. إعداد واستكمال والتوقيع على السجلات المعمول بها لمراقبة الجودة والفحوصات والاختبارات. إجراء فحوصات المراقبة للتحقق من الامتثال للعمليات والإجراءات والمواصفات المعتمدة ومتطلبات المشروع. إجراء فحوصات استلام المواد للتحقق من التوافق مع شهادات اختبار المواد (MTC) المعتمدة ومواصفات المشروع وأوامر الشراء ومتطلبات تتبع المواد. إجراء وملاحظة اختبارات تأهيل إجراءات اللحام (WPQT/PQR) واختبارات تأهيل اللحامين (WQT) وفقاً لمواصفات العميل والمعايير الدولية المعمول بها. التحقق من أن أنشطة اللحام يتم تنفيذها بواسطة لحامين مؤهلين باستخدام مواصفات إجراءات اللحام (WPS) المعتمدة ومواد اللحام المستهلكة المؤهلة. إجراء فحوصات التجميع (fit-up)، وإعداد الوصلات، والتسخين المسبق، ومحددات اللحام، والفحص البصري قبل وأثناء وبعد اللحام. مراجعة والتحقق من سجلات اللحام، وخرائط اللحام، وتتبع المواد، وسجلات التحكم في المواد المستهلكة، وسجلات المعالجة الحرارية بعد اللحام (PWHT)، وسجل إصلاح اللحام. تنسيق وملاحظة أنشطة الاختبارات غير المدمرة (NDE)، بما في ذلك: o الاختبار بالإشعاع (RT) o الاختبار بالموجات فوق الصوتية (UT) o الاختبار بالجسيمات المغناطيسية (MT) o الاختبار بالسائل النافذ (PT) o اختبار الصلادة. التأكد من تنفيذ أنشطة الاختبارات غير المدمرة وفقاً للإجراءات المعتمدة ومواصفات المشروع والمعايير المعمول بها. شهد وملاحظة أنشطة إدارة الفلنجات واختبارات الضغط الهيدروستاتيكي والنيوماتيكي للأنابيب/خطوط الأنابيب. مراجعة تقارير اللحام والفحص والتأكد من أن جميع سجلات الجودة كاملة ودقيقة ومحفوظة وفقاً لمتطلبات المشروع. تنسيق أنشطة الفحص مع أطقم الإنشاءات والهندسة والمقاولين من الباطن ومفتشي الطرف الثالث وممثلي العميل لضمان الفحص والاختبار والاعتماد في الوقت المناسب. التحقق من أن جميع معدات القياس والفحص معايرة بشكل صحيح ومستخدمة خلال فترة صلاحيتها. ضمان الامتثال الكامل لخطط الفحص والاختبار المعتمدة، وبيانات أسلوب العمل، وخطط الجودة، ومواصفات المشروع، ومتطلبات الجودة الخاصة بالعميل. متابعة ودعم الإغلاق في الوقت المناسب لتقارير عدم المطابقة (NCRs) والتحقق من تنفيذ الإجراءات التصحيحية المناسبة. إصدار إشعارات الإفراج عن الفحص (IRNs) للمنتجات/الأعمال المقبولة والتوقيع أو التحقق من حزم الاختبار ومعاملات ضبط الجودة المعمول بها. المشاركة في تدقيق الجودة، ومحادثات السلامة (Toolbox talks)، والدروس المستفادة، ومبادرات "الصحيح من المرة الأولى" (RFT)، وبرامج التحسين المستمر. الحفاظ على توثيق دقيق للفحص وإعداد تقارير الجودة اليومية والأسبوعية والشهرية حسب المطلوب. تعزيز ثقافة الجودة القوية مع ضمان الامتثال لمتطلبات الصحة والسلامة والبيئة (HSE) وممارسات العمل الآمنة خلال جميع أنشطة الفحص.
ملف المرشح المطلوب
- خبرة متدرجة من 8 إلى 10 سنوات كمفتش ضبط جودة لحام/أنابيب.
- خبرة لا تقل عن 8 سنوات في مجال صناعة البتروكيماويات، مع خبرة واسعة في أنشطة فحص اللحام والأنابيب.
- يفضل/يشترط بشدة وجود خبرة سابقة في مشاريع سابك.
- درجة البكالوريوس في الهندسة الميكانيكية أو تخصص هندسي ذي صلة.
- شهادة فحص لحام صالحة ومعترف بها مثل: o CSWIP 3.1 / ما يعادلها o AWS CWI o أو أي شهادة معترف بها دولياً ومعادلة لها.
- معرفة قوية باللحام والأنابيب والاختبارات غير المدمرة واختبارات الضغط وتتبع المواد ومتطلبات ضبط الجودة.
- معرفة جيدة بالأكواد والمعايير الدولية المعمول بها ومواصفات المشروع ومتطلبات العميل.
- خبرة في مراجعة وتنفيذ خطط الفحص والاختبار (ITPs)، وWPS/PQR، وتأهيل اللحامين، وإجراءات الفحص، وثائق الجودة.
- مهارات تواصل وتنسيق قوية مع فرق الإنشاءات والمقاولين من الباطن ومفتشي الطرف الثالث وممثلي العميل.
الكفاءات الفنية الرئيسية :
- فحص ومراقبة اللحام
- فحص الأنابيب
- فحص المواد وتتبعها
- WPS/PQR وتأهيل اللحامين
- التجميع والفحص البصري
- تنسيق وملاحظة الاختبارات غير المدمرة (NDE)
- فحص المعالجة الحرارية بعد اللحام (PWHT)
- الاختبار الهيدروستاتيكي والنيوماتيكي
- إدارة الفلنجات
- رسم خرائط اللحام والتوثيق
- إدارة تقارير عدم المطابقة وإغلاقها
- مراجعة حزمة الاختبار / ملف ضبط الجودة
- الامتثال لخطط الفحص والاختبار (ITP) وبيانات أسلوب العمل
- تقارير الجودة والتوثيق
- الامتثال للصحة والسلامة والبيئة
الخلفية الصناعية المفضلة: يفضل بشدة المرشحون الذين لديهم خبرة في بيئات العمل التالية:
- مصانع البتروكيماويات
- مشاريع النفط والغاز
- المصافي
- مشاريع/منشآت سابك
Key Responsibilities: Implement QA/QC activities, including surveillance of subcontractor and sub-supplier works, in accordance with approved ITPs, procedures, method statements, quality plans, and other control documents. Prepare, complete, and sign applicable records for quality surveillance, inspections, and testing. Conduct surveillance inspections to verify compliance with approved processes, procedures, specifications, and project requirements. Perform material receiving inspections to verify compliance with approved MTCs, project specifications, purchase orders, and material traceability requirements. Conduct and witness Welding Procedure Qualification Tests (WPQT/PQR) and Welder Qualification Tests (WQT) in accordance with client specifications and applicable international standards. Verify that welding activities are performed by qualified welders using approved WPSs and qualified welding consumables. Conduct fit-up, joint preparation, preheating, welding parameter, and visual inspections before, during, and after welding. Review and verify welding records, weld maps, material traceability, consumable control records, PWHT records, and weld repair history. Coordinate and witness Non-Destructive Examination (NDE) activities, including: o Radiographic Testing (RT) o Ultrasonic Testing (UT) o Magnetic Particle Testing (MT) o Liquid Penetrant Testing (PT) o Hardness Testing Ensure NDE activities are performed in accordance with approved procedures, project specifications, and applicable standards Witness flange management activities and piping/pipeline hydrostatic and pneumatic pressure testing. Review welding and inspection reports and ensure all quality records are complete, accurate, and maintained as per project requirements. Coordinate inspection activities with construction, engineering, subcontractors, third-party inspectors, and client representatives to ensure timely inspection, testing, and approval. Verify that all measuring and inspection equipment is properly calibrated and used within its validity period. Ensure full compliance with approved ITPs, Method Statements, Quality Plans, project specifications, and client quality requirements. Monitor and support the timely closure of Non-Conformance Reports (NCRs) and verify implementation of appropriate corrective actions. Issue Inspection Release Notes (IRNs) for accepted products/works and sign or verify applicable test packs and QC dossiers. Participate in quality audits, toolbox talks, lessons learned, Right First Time (RFT) initiatives, and continual improvement programs. Maintain accurate inspection documentation and prepare daily, weekly, and monthly quality reports as required. Promote a strong quality culture while ensuring compliance with HSE requirements and safe working practices during all inspection activities.
Desired Candidate Profile
- 8 10 years of progressive experience as a QC Welding/Piping Inspector.
- Minimum 8 years of relevant experience in the petrochemical industry, with strong exposure to welding and piping inspection activities.
- Previous SABIC project experience is highly preferred/required.
- Bachelor's degree in Mechanical Engineering or a related engineering discipline.
- Valid and recognized welding inspection certification such as: o CSWIP 3.1 / equivalent o AWS CWI o Or another internationally recognized equivalent certification.
- Strong knowledge of welding, piping, NDE, pressure testing, material traceability, and quality control requirements.
- Good knowledge of applicable international codes, standards, project specifications, and client requirements
- Experience in reviewing and implementing ITPs, WPS/PQR, welder qualifications, inspection procedures, and quality documentation.
- Strong communication and coordination skills with construction teams, subcontractors, third-party inspectors, and client representatives.
Key Technical Competencies :
- Welding Inspection & Surveillance
- Piping Inspection
- Material Inspection & Traceability
- WPS/PQR & Welder Qualification
- Fit-Up & Visual Inspection
- NDE Coordination & Witnessing
- PWHT Inspection
- Hydrostatic & Pneumatic Testing
- Flange Management
- Weld Mapping & Documentation
- NCR Management & Close-Out
- Test Pack / QC Dossier Review
- ITP & Method Statement Compliance
- Quality Reporting & Documentation
- HSE Compliance
Preferred Industry Background: Candidates with experience in the following environments will be strongly preferred:
- Petrochemical plants
- Oil & Gas projects
- Refineries
- SABIC projects/facilities'